ESata internal connectors

Hey guys, I've been having some problems with my firewire lately. I use all firewire and my computer keeps getting kernel panics 5 times a day. For work I just got some drives that came with a eSata extender with the ability to connect on my mother board (i dont have the eSata card). Ive been looking arounf but I can find the eSata connectors. I have the 2004 or 2005 PPC dual 2.0.
Does my mac came with those 2 port inside?
Is there any way to check firewire port by port to see which one is screwing me?
Also, where can I get a copy of hardware test for mine? Maybe that would tell me what it is.
thanks and sorry for long post!

i will try to reset. thanks
I have been watching some videos on youtube of guys connecting the drives on the newer G5 tower. The ports are located behind the speaker-fan plugged on the mother board. They all show the new mac pro but not my model. you are saying that my old model does not come with that, right?
thanks

Similar Messages

P67A-C45 (B3) and USB 3.0 internal connector

Hello to all!!
I'm here because I'm not able to find a solution, here is the situation:
- Internal memory 3,5" card reader USB 2.0
- Front case USB 2.0 ports.
This motherboard is equipped with one only USB 2.0 connector and one USB 3.0.
Here the problem:
I must connect OR the front case USB ports OR the card reader, and it is not acceptable
What I checked:
- PCI card for USB 2.0 ports with at least an internal one: does not apply due to the internal connector, it's exactly the same as the external ones (checked many manufacters and models, all the same)
- Looking for a 3.5" card reader USB 3.0 only seems doesn't exist, I can find some model with USB 3.0, eSATA, USB 2.0 all together, and I want only memories slots.
- Looking for an adapter that convert the USB port to an internal one: no success.
Anyone can help me to find a solution? This is a very stupid problem, and I'm surprise to don't be able to find a stupid solution!!
Tks in advance

Quote from: Henry on 18-May-11, 03:17:45
Keep in mind that with MSI mb P67A-C45 the number in red is indicative of the feature level, lower # = fewer features, higher number = more features. For P67: 43 = lowest level, 80 = highest level
Tks for the info, very useful!
Now I found and bought a NZXT product (http://www.nzxt.com/new/products/case_accessories/iu01_usb_expansion), installed on any computer with non MSI motherboard it works, on this motherboard not at all.
If I connect an external USB HDD it switch on for one second and then OFF, if I connect a pendrive it is not detected by the OS and its led is steady ON.
So, it is impossible in any way to have more than one USB 2.0 connector managed by this motherboard???

MSI H67MA-E35-B3 S/PDIF internal connector

A quick question before I decide on buying a new motherboard... Does the MSI H67MA-E35-B3 come with an S/PDIF out connector/bracket for its internal header??
Thanks.

http://service.msicomputer.com/msi_user/PreSaleForm.aspx
If they don't come with one there are other brackets readily available that will work on it. Those S/PDIF brackets rarely come with a MB.

SCOM Internal Connector - Default Alert Format

Hi All,
We are having SCOM Probe, to Receive alarms from Netcool Connctor (Created at the time probe integration) and for that connector subscriptions are allowed to receive event
Post that, we are able to receive alarms of all them and all works fine.
But, For Service Availability Alarms,
Let Say: I have stopped one service , and got the alarm, but am not able to find exact service name and display name of service from raw data/event.
Further i have seen that , Monitoring Alert properties from below link
http://msdn.microsoft.com/en-us/library/microsoft.enterprisemanagement.monitoring.monitoringalert_properties.aspx
From above URL info, looks like by default am not getting Service Name and etc as like below.
URL : http://blogs.technet.com/b/kevinholman/archive/2007/12/12/adding-custom-information-to-alert-descriptions-and-notifications.aspx
Service Monitors:
Service Name                         $Data/Context/Property[@Name='Name']$
Service Dependencies             $Data/Context/Property[@Name='Dependencies']$
Service Binary Path                $Data/Context/Property[@Name='BinaryPathName']$
Service Display Name             $Data/Context/Property[@Name='DisplayName']$
Service Description                 $Data/Context/Property[@Name='Description']$
http://blogs.technet.com/b/kevinholman/archive/2007/12/12/adding-custom-information-to-alert-descriptions-and-notifications.aspx
How to get Service Name and others along with Monitoring Alert Props via connector to Netcool Event Mgmt Systems.
Is there any possibility to get Service Name and Display Name in Custom Fields Available in Default Monitoring Alert Properties ??
Thank you so much in advance.
Regards
Sekhara
9611200711

Hi Yan Li
Thanks for your reply.
Can you correct me in terms of syntax used in Custom Field
In your ex link i can see
<Property Name="CustomField9" NewValue="$PrincipalName$" GroupIdFilter=""
/>
        <Property Name="CustomField10" NewValue="$Severity$" GroupIdFilter=""
Above values taken from Monitoring Alert Class Members right ?
I wanted to store Service Name and Display Name as like above my query
As per my ex: Service Name = $Data/Context/Property[@Name='Name']$
CustomField1 = Here what value should i put here ??
Am pretty new to SCOM, am doing SCOM integration with Netcool.
So i need to know exact value , to propose right changes in SCOM to Client
Thanks
Sekhara
Sekhara Reddy

SCOM 2012 delay forwarding alerts to internal connector

All,
Is there anyway to delay alerts being forwarded to a connector similar to how you can with email subscriptions?
I need to delay alerts being forwarded to AlertItNow connector until a powershell channel subscription has run.
The powershell script populates Custom Field 1 which is required to run before the alert is forwarded to ServiceNow helpdesk.
Thanks,
Darren

Hi Darren,
I have to say that, as far as I know, no built-in way to delay forwarding to a connector.
There is an option for delay aging for notifications configuration.
http://blogs.technet.com/b/kevinholman/archive/2012/04/28/opsmgr-2012-configure-notifications.aspx
Regards,
Yan Li
Regards, Yan Li

Internal connectors, front panel audio cennector (10-1 pin AA

i have a Creative Sound Blaster Audigy 2 ZS, and i want to connect me front panel audio connecters to me soundbord, how to do that. i have tryed to download the online manual, but it is corrupt/error so no help there.
can some one help me
question 2, do some one have a manual for Creative Sound Blaster Audigy 2 ZS, or can link one thats work?
Med venlig hilsen / Mit freundlichen Gr?en / Best regards
Allan

Quote from: [LT]Eternalbliss on 21-June-08, 03:43:49
I've just recently had this similar problem. I think the issue in your case is step 3. I believe you should connect the Azalia 10pin wire to your X-fi card, not the mobo.
My problem was that i had connected AC97 10pin wire to my X-fi, after which plugging in my headphones didn't mute my speakers.
That was the problem - works great now! Thanks

Internal CD ROM Audio Connector (K8N Neo4/SLI) Help Please

I need two audio inputs for my system - The one (external) is being used for my secondary PC's sound. Now I need an input for this new TV Tuner card I have. I assumed that I could make a custom cord that has an 1/8" stereo mini plug on one end and the other end would have that CD ROM Audio connector (connector JCD1 on the motherboard) ... I successfully made a custom cord, but the audio doesn't work. Is the JCD1 connector on the motherboard a DIGITAL or ANALOG input?? Why wouldn't my cable work? I'm absolutely sure the cable is made properly. Will a simple "Y" Adapter for the input on the back of the PC do the trick, or will it backfeed through the sound of my secondary PC's sound card?

Alot of TV tuner cards have internal connector on the card so you can just use a "CD cable", so that's too bad yours doesn't it would make life alot easier.
It's analog. I don't know why you can't here anything. I'll bet something is muted or turned down in Windows or your application if you are sure the cable you made is right.

K9A2 Plat v1 eSATA -- No drives detected at POST? -- (Resolved)

Upgrading the BIOS to 1.4 was not a fix for me, so I set aside the two NEW cables I had been using, and just added an eSATA conversion segment to some standard SATA cables I had been using. I'm now booting the off of a 0+1 RAID on the Promise T3, which includes the two external ports. I transferred the drives directly over from the internal to external connectors without any apparent ill effect. No modification / reinstall of the RAID / OS required. With this result, I'm officially writing this all off to bad cables.
Perhaps as a result of the BIOS upgrade, Win2k reported that it had detected new hardware. I'm not sure why, but sometimes on startup, the system hangs while scanning for drives on the PDC42819 --- with a message to the effect that "your system has a hardware problem!". Reboot and it goes away, so whatever!
This now allows me to run more burners. I'm running three SATA and one IDE. Everything is happy in device manager, save for one unknown device.
****** Original post:
Win2k SP4 is running pretty well on my SB600 0+1 RAID, but when I tried to use the Promise T3 eSATA ports recently I encountered a problem at the point where POST passed control to the PDC42819 for array enumeration and scanning for attached drives. Specifically, normal SATA drives attached to the eSATA ports are never detected, even though the exact same drives attached to SATA5 & SATA6 internally are detected without any problem.
I have some difficulty understanding the difference between the SATA5-6 and eSATA ports as listed in the mainboard specifications. Some of the following obviously applies to both the v1 and v2, and when it starts talking about SATA5-6 and eSATA, I assume this is referencing what I have:
"4 SATAII ports by SB600 (SATA1~4)
2 SATAII ports by Promise T3, support SAS ready device
(SATA5~6, optional)
2 eSATA ports by Promise T3 (optional)
Supports storage and data transfers at up to 300MB/s
2 SATA (SATA5 & SATA6) ports and 2 eSATA ports by Promise T3
support to install storage devices only (optional)"
So I have some basic questions about the Promise T3 and associated ports:
If my board actually has the eSATA ports (not just solder blanks like those at JTPM), is a regular SATA drive supposed to be detected if plugged in?
Assuming that the Promise T3 is enabled in the BIOS, is there any other prerequisite for making the eSATA ports work? Like, can you use the eSATA ports without using SATA5-6 internally on the mainboard?
Swapping eSATA cables made no difference.
Win2k SP4
K10 Phenom 9500
Scythe SCZP-1000 139mm CPU Cooler
4G Corsair Dominator DDR2 1066
Hitach A7K1000 750GB HUA721075KLA330 (0A35771)
RAID 0+1
Promise T3 (PDC42819)

Quote
If my board actually has the eSATA ports (not just solder blanks like those at JTPM), is a regular SATA drive supposed to be detected if plugged in?
Yes.
Quote
Assuming that the Promise T3 is enabled in the BIOS, is there any other prerequisite for making the eSATA ports work? Like, can you use the eSATA ports without using SATA5-6 internally on the mainboard?
Yes, you can.
I have had some different results depending on the eSATA enclosure I use. Tested with two regular SATA drives, Seagate Barracuda 7200.10 and Hitachi 7K250. Both drives work fine on the internal connectors, both drives work fine in an ICY BOX enclosure connected to eSATA. Trouble started when I bought a second enclosure, Cooler Master X-Craft. The Hitachi drive simply wasn't there anymore, the Seagate was but it would hang during boot where it is scanning for hard drives...

Please help: After removed a connector (nagios-connector) there is an error at the operations Manager Console

Hello,
after installing the nagios connecor and it doesn'work, i try to remove it; with the powershell command remove-SCOMConnector. After removing it, Get-SCOMConnector shows me, that it doesn't exist:
PS D:\> Get-SCOMConnector
Name : Network Monitoring Internal Connector
DisplayName : Connector for populating network devices.
Description :
Initialized : False
Name :
DisplayName :
Description :
Initialized : True
Name : SMASH Discovery Internal Connector
DisplayName : Connector for populating SMASH devices.
Description :
Initialized : False
Name : Operations Manager Internal Connector
DisplayName : A connector used by Operations Manager components to insert discovery data, please create your own connec
tor do not use this connector.
Description :
Initialized : False
But when i take a look to the connectors in Operations Manager Console, it hangs, after a while i have this error:
Date: 27.05.2014 10:04:43
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.EnterpriseManagement.ConnectorFramework.EnterpriseManagementConnector.Reconnect(EnterpriseManagementGroup managementGroup)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.GetUpdate(IndexTable indexTable, QueryUpdate`1 update, CacheCursor cursor, Range range, Int32 offset, Int32 groupLevel)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(IndexTable indexTable, QueryUpdate`1 update)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.GetUpdate(CacheSession session, Boolean fullUpdate)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.QueryCache`2.FireUpdateEvent(CacheSession session, DateTime updateTime, Boolean dataChanged, Boolean fullUpdate, Boolean updatesOnly, IEnumerable queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.FireUpdateEvents(CacheSession session, Boolean dataChanged, Boolean fullUpdate, ICollection`1 queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.PostQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType, Boolean dataChanged, DateTime queryTime, ICollection`1 queryResult)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalSyncQuery(CacheSession session, IndexTable indexTable, UpdateReason reason, UpdateType updateType)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.InternalQuery(CacheSession session, UpdateReason reason)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.Query`1.TryDoQuery(UpdateReason reason, CacheSession session)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Can somebody help me fixing this error?
Strange.. the powerShell Command "get-SCOMConnector" works.. but the console hangs (on loading) when i want to show the connectors...
Kind regards
Wolfgang

Hi,
I agree, we may need to remove the connector from OpsDB. In addition, here is blog regarding to the similar issue, hope it helps:
Error: “Object reference not set to an Instance of an Object” System Center Operation Manager 2012 Connector.
http://blogs.technet.com/b/birojitn/archive/2012/07/07/error-object-reference-not-set-to-an-instance-of-an-object-system-center-operation-manager-2012-connector.aspx
Regards,
Yan Li
Regards, Yan Li

My iphone no longer displays anything through the HDMI connector

I purchased a cheap 30-pin to HDMI connector (big mistake) but was able to see my iPhone screen on my TV. I then added a Lightening to 30-pin connector so I could display my girlfriend's iPhone 5C screen on the TV. But I had problem taking these two connectors apart and the end of one of them started to come apart. Pushed it back in. When I then tried to display her 5C screen, nothing worked. Then I went back to my iPhone 4 and it also no longer worked. I thought the cable was bad so I then purchased a genuine Apple 30-pin to HDMI connector and Apple Lightening to 30-pin connector. But I still don't see anything on the TV for either of the iPhones BUT my iPad 2 does display data on the TV. Conclusion: Did I short out something in both iPhone internal connectors? Has anyone ever see this kind of problem? BTW, both phones can still be charged without any problem.
Thanks for the help.

I'd start by calling VZW support. They are really good in a situations like this. I work with them a lot in the Enterprise space. Sounds like your network/roaming settings are messed up.

New internal hard drive not seen in disk utility

Hi
I replaced my hard drive with a western digital black edition but when I use it as an internal it is not seen by the disk utility.
I have installed and booked from the new drive using USB so it doesn't seem faulty.
When I use the old drive as an internal it works so I don't know what's going wrong.
I have had a look at similar problems but nothing I have tried has helped.

It may be the internal connecting cable that is the problem. If you can install the new HDD in an enclosure, connect it to the MBP, then see if you recognize it using the OSX installation disk. If so, the internal connector should be replaced.
Ciao.

How do I remove 33 Virtual Machine Manager Connectors in SCOM?

I am not even making that up. Somehow I have 33 Virtual Machine Manager connectors in SCOM when I look at Internal Connectors. If I delete them all using the SCOM PowerShell cmdlets, they will disappear for a day or so, and then they all come back.
Anyone have an idea what is going on here and how I can get rid of all the extra ones? I have done everything I can think of and can't seem to get rid of them (I realize there should be one of them).
MCITP | VCP4 | VCP5

I wasn't around when this was all configured, so I am not sure what it is supposed to look like. Are you telling me that I should expect to see 33 different VMM connectors in SCOM? One makes sense, why 33? And no, I would like
to keep the integration, and just remove all the unneeded connectors.
This is how integrations works and this is by design.
Regards,
Ivan

Error adding a SCOM Alert Connector

I have a SCOM 2012 SP1 and SCSM 2012 SP1 environment in production. I have had a working CI connector for some time, but we decided to try to add an alert connector to the mix.
At the point where I provide credentials for SCOM I get the following warning
"Found at least one other alert connector in Operations Manager. Alerts may not be routed as expected if multiple connectors subscribe to the same alert."
Hmm. That's interesting because there are no other alert connectors.
I checked the SCOM side for any alert connectors and any configured subscriptions on the internal connectors and came up blank.
I then ran the following queries on the SCOM and SCSM databases:
select DisplayName,IsInitialized,ConnectorID from Connector,BaseManagedEntity
where Connector.BaseManagedEntityID=BaseManagedEntity.BaseManagedEntityID
Neither shows an alert connector in place.
I pressed on and created the connector. I then added my subscriptions to the SCOM side.
I can see my Connector run every 30 seconds, but it never retrieves any alerts.
The state never flips to initialized on the connector either.
I have removed and recreated the connector and always see the same error.
Aside from checking SCOM and the connector tables in the operational databases, where else can I look for this mysterious other alert connector?
Thanks,
Joe

Dear Joe,
hope these links will help you:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/3075bbb7-59db-4671-994d-7540871a2a23/scom-connector-to-multiple-service-manager-environments?forum=connectors
http://www.thecloudbuilderblog.com/blog/2012/6/2/scsm-2012-connector-bugndashincidents-generated-from-rule-ba.html
Regards
Jreij12

Slow eSATA Transfer with PNY ExpressCard

Hello...
I just installed a PNY ExpressCard - SATA II 2 Port (eSATA) (Model # P-NSA2-EC-RF) to my MacBook Pro 2.16GHz Intel Core Duo - 2GB DDR2 SDRAM - 100GB Hard Drive @ 7200rpm. The driver I am using to make the PNY ExpressCard work is the SiI3132, version 1.1.9 (found here: http://www.siliconimage.com/support/supportsearchresults.aspx?pid=32&cid=3&ctid= 2&osid=3&).
I am using this ExpressCard to connect to the eSATA port on an external Western Digital MyBook Studio hard drive (1TB).
The thing is that the external drive seems to transfer faster with the Firewire 400 cable, and not with the eSATA (which in theory should be much faster, right?).
Any ideas why this is happening?

Ok, here are the xBench (v. 1.3) results from my internal drive, and then the Western Digital MyBook Studio external drive, first with FW400, then with eSATA:
*Internal Drive on MacBook Pro (100GB @ 7200 rpm):*
Disk Test 37.11
Sequential 63.15
Uncached Write -- 62.06 -- 38.11 MB/sec [4K blocks]
Uncached Write -- 78.02 -- 44.14 MB/sec [256K blocks]
Uncached Read -- 43.05 -- 12.60 MB/sec [4K blocks]
Uncached Read -- 89.37 -- 44.92 MB/sec [256K blocks]
Random 26.27
Uncached Write -- 8.42 -- 0.89 MB/sec [4K blocks]
Uncached Write -- 79.37 -- 25.41 MB/sec [256K blocks]
Uncached Read -- 82.49 -- 0.58 MB/sec [4K blocks]
Uncached Read -- 113.65-- 21.09 MB/sec [256K blocks]
*Western Digital MyBook Studio (1TB) connected with FW400 (and all other cables disconnected):*
Disk Test 52.10
Sequential 52.60
Uncached Write -- 51.04 -- 31.34 MB/sec [4K blocks]
Uncached Write -- 54.40 -- 30.78 MB/sec [256K blocks]
Uncached Read -- 41.02 -- 12.01 MB/sec [4K blocks]
Uncached Read -- 73.04 -- 36.71 MB/sec [256K blocks]
Random 51.61
Uncached Write -- 22.04 -- 2.33 MB/sec [4K blocks]
Uncached Write -- 98.70 -- 31.60 MB/sec [256K blocks]
Uncached Read -- 81.71 -- 0.58 MB/sec [4K blocks]
Uncached Read -- 102.50 -- 19.02 MB/sec [256K blocks]
*Western Digital MyBook Studio (1TB) connected with eSATA (and all other cables disconnected):*
Disk Test 47.41
Sequential 46.14
Uncached Write -- 102.48 -- 62.92 MB/sec [4K blocks]
Uncached Write -- 113.28 -- 64.09 MB/sec [256K blocks]
Uncached Read -- 16.48 -- 4.82 MB/sec [4K blocks]
Uncached Read -- 134.90 -- 67.80 MB/sec [256K blocks]
Random 48.75
Uncached Write -- 18.71 -- 1.98 MB/sec [4K blocks]
Uncached Write -- 146.92 -- 47.03 MB/sec [256K blocks]
Uncached Read -- 72.00 -- 0.51 MB/sec [4K blocks]
Uncached Read -- 126.64 -- 23.50 MB/sec [256K blocks]
So, what does all this tell you?!

2 internal audio devices with X-Fi Plati

I had Audigy 2 ZS and 2 device hooked up to it (DVDROM and a TV card). Just picked up a X-FI Platinum and it only has one internal connector. Big issue. Am I missing something. What is CL thinking here.
Michael

can_hemlock wrote:
I had Audigy 2 ZS and 2 device hooked up to it (DVDROM and a TV card). Just picked up a X-FI Platinum and it only has one internal connector. Big issue. Am I missing something. What is CL thinking here. Michael
Does present CD/DVD-ROM dri'ves need a cable anymore?
jutapa

ESata internal connectors

Similar Messages

Maybe you are looking for