Esb instances execute fine, but are delayed in esb instances view
when executing esb processes the instances are executing fine, and responding as expected.
But when trying to investigate in esb instances view there are no instances shown.
Only old instances.
It seems like the instances view (and esb_activity table) are days behind in logging of instances.
What could be the cause for this.
I can see the esb monitoring topic performance says:
Messages waiting for read: 10 278
Actually this is a known bug, and a patch is available, patch 9537174.
Will now install patch and retest
Bug 10090909: EXTREMELY LOW MESSAGE DEQUEUE RATE WHEN MANY MESSAGES IN ESB_RELATION_XML
When posting messages to ESB, when there is a certain, high number of rows in the ESB_RELATION_XML table, the dequeue rate from AQ$_ESB_MONITOR_I and ESB_MONITOR decreases dramatically.
A number of tests were run. During some, for example, if there were up to a few thousand rows in ESB_RELATION_XML, the dequeue rate was high, probably around 10s or 100s of rows being dequeued per
second. With about 100000 rows in ESB_RELATION_XML, the dequeue rate decreased to around 1 message per second or slower. In the customer's case, where they have a throughput of millions of messages,
the dequeue rate drops to about *30 seconds for 1 message*. Decompilation of the code show a possible cause related to full table scans.
Bug 9877138: INSTANCES NOT BEING DISPLAYED IN ESB CONTROL SINCE INSTALLING MLR#9
Bug 9537174: MLR7: MESSAGES BUILDING UP IN ESB_MONITOR QUEUE CAUSING ESB CONSOLE DISP DELAY
Bug 9828169: ESB INSTANCES ARE TOO SLOW TO SHOW UP IN ESB CONSOLE AFTER UPGRADE TO MLR#8.
Bug 9819999: TIMESTAMP IN ESB_ACTIVITY TABLE CONTAIN INCORRECT DATETIME
Similar Messages
-
Mapping executes fine but does not produce any output
I created a mapping to copy values from one table to another for a particular condition. I have data for thsi particular condition in the input table.
The Mapping validated fine and was deployed successfully.
The OWB Mapping is run from Unix.
The mapping executes fine without any issues but it does practically nothing. The target table has no data.
Need any more details on this? Please help.Generate the code at Mapping Editor and execute it manually. Probably you have to modify the where clause.
-
Audio plays fine, but video is now corrupt... green, distorted video window
I have various quicktime files on the pc that played fine but are now unable to be viewed. I have downloaded again, they play fine... but now a few days later... audio, but no video at all... not "scrambled", just video "noise", really.
I have reinstalled quicktime.
Any ideas??+I have various quicktime files on the pc that played fine but are now unable to be viewed. I have downloaded again, they play fine... but now a few days later... audio, but no video at all... not "scrambled", just video "noise", really.+
"Green" gets me thinking about issues with DirectX on the PC.
Have you tried the "Disable Direct3D acceleration in QuickTime" section from the following document? (iTunes uses QuickTime for video playback, so the same basic troubleshooting procedures apply.)
Troubleshooting iTunes for Windows XP and 2000 video playback performance issues -
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
-
I have installed Itunes 10.5 on my PC and I have turned photostream on on my Ipad2 and Iphone. The photos sync fine but they are not showing up on my PC. What's the problem? I can see my photos on my ipad and Iphone. I want to be able to see them on my PC when I take pictures from my Iphone and Ipad. How do I see Photostream on my PC?
You have to install the iCloud control panel for windows, then sign in with you apple ID, and check what you want to sync.
link: http://support.apple.com/kb/DL1455 -
Delete AppStore via iTunes Works Fine, but the footprints are still visible. In the iPad Local app Store Looping at tab 'Not on iPad'. How can these footprints are Delegat too, so they aren' synchronised any more?
Click on the app and press delete.
-
I have noticed an issue with utilizing the “stream” function on iOS 7. If you choose to just stream the movie by hitting the play button it seems to actually start downloading (which is fine) but if you are say halfway thru the movie and stop you can clearly see that storage has been reduced under the usage, yet under the “videos” tab it still states “No Data” the only way to delete what you have partially downloaded is to fully download the video, which is fine but there is no way to tell what videos have been partially downloaded (I.e which occurs a lot when your child switches between movies using the so called “stream” function). This becomes troublesome once the capacity of the ipad is almost met and you have no way to delete this data since you may have several videos that have started to be viewed (hence partially downloaded). Apple needs to somehow make it truly streaming or provide an update so the storage can be managed. The only way I have been able to remove partially downloaded videos is by doing a total software restore. (The video data that is in question when connected to my MacBook shows up in iTunes as “other”) if you have any insight into this issue it would be greatly appreciated. Thanks.
Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post.<br>
<sub><b>Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]</b></sub>
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.''' -
When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server
Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...
-
HT1209 Some songs no longer play on iphone, but are fine in itunes library... Help!
Songs i purchased from itunes months ago play fine on my computer in itunes, but are no longer playing on my iphone. they appear in the playlist, but won't play. i took all the music off my phone and synced all over again, and they still won't play. I don't know why only about a dozen songs are affected. they were purchased at different times since last summer. I recently experienced the "lost contacts" issue and had to restore my phone from backup. could that have something to do with this?
Are these songs purchased from the iTunes store, or from your own cds?
Been through these?
The Five Rs. -
Dear Gurus,
Synchronization from SLD to LMDB is working fine, but data is not written to Software ==> Product Instance section tab. What could be the problem ? Normally it should gather automatically, but pushed me to select manually lots of component ???
Here is collecting is working fine !!!Hello Kemal,
You have to ensure that your Technical System info is properly filled automatically.
In LMDB you first create its Product System on LMDB Start Screen ProductSystem tab, after that please assign its respective Technical System. You probably need to run the Verification Check in order to confirm that your Product System has all Product Instances according on Technical System's Software Component Versions.
Regards.
Luis Roel -
I imported files from an external hard drive to Itunes on a new computer. they imported & play fine, but the ratings & playlists are gone & i am unable to update any info. I found a file name playlist on old drive & imported now most files are missing! Help!
Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
tt2 -
II've just setup a new iPad Air for my daughter with a new apple ect, everything is working fine, but I can't get it to redeem the I tunes voucher. It asks for I'd and password, put them in and comes up with wrong Id/password. They are not incorrect answers, but reset password just incase. Same problem. Also tried making another apple account. Same problem again can anyone help?? Please
Your iTunes Voucher is link to the old Apple ID.
-
I click File>Print. Whether I open pdf in Preview, save to pdf, or just print, I get this error. The first page is fine, but all the rest are shifted up and to the right and magnified.
I've never been able to print out a multi-page document on Firefox with my new computer. I can copy/paste the address to Safari (gross) and it prints just fine, either to pdf or to a hard copy.
Save me from having to use Safari!Making sure the fonts were embedded helped some, but it's still hit and miss. Sometimes I'm still missing pieces. One workaround I have found that works is just print one page without security to PDF, and then go back and replace the bad page(s) with them. So it will print properly, just not all the time. I have a copy of a word page and then what acrobat did to it. I just need to figure out how to post it here.
Kim -
Youtube videos suddenly will not show in IE, but are fine in other browsers
I did an update to my website, didn't like it and backed the changes out. When I tested it in Oera, Firefox, Chrome, Safari, the two Youtube videos on my home page render fine, but when I look at the page in IE 7 or 9 I get the red X. Any ideas. The chnage I made that I backed out was my Twitter feed. I thought maybe changing the the left sidebar width affected the videos in the content are, but I have played with the sidebar width and to no avail. Any advise would be greatly aprreciated. Here is the URL:
www.classproduce.comStart Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
The windows experience index for your system could not be computed on bootcamp.
My Macbook pro is slow on WIN7. Is there i am missing any thing? I wanted to calculate Windows Experience Index (WEI), but when i try to, i am getting below error message. "the windows experience index for your system could not be computed"
-
A table "CMP3$111448" appears in DB replicating a big table and spending a lot of space in database
We have a web application which manages digital documents, its main table is named "DOC_ADJUNTO", this table has a column "DOCUMENTO" of type BLOB and some other columns. Also there is an Oracle Text Index for the BLOB column of the table "DOC_ADJUNT
-
I opened a spam e-mail, I think my phone has a virus how do I get it off? HELP!
I opened a spam e-mail, I think my phone has a virus how do I get it off? HELP!
-
ISE: Authentication vs Posturing - log coorelation?
Right from the start it is INCREDIBLY easy to see who is trying to login to the VPN using ISE...and then it is easy to get to the screen to tell you who passed/failed posturing. What I am looking for is a way to tell if someone logged in but did not
-
Sequence.nextval doubles the returned value with Execute Statement (F9)
There appears to be a quirk with sequences in Raptor. Has anyone noticed that depending on how you execute this sql (SELECT MYSEQ.NEXTVAL FROM DUAL;) the value returned is either the correct nextval or double what you expected? For example, MYSEQ is