ESS EHP5: Appraisal document not working

Hi,
I am implementing performance appraisal (EHP5 and BP ESS 1.50) and am sorting out the very confusing scenario of EHP4 and EHP5 versions of appraisal documents. I am using the pmp version EHP5 and BP ESS 1.50 (BP ESS 1.41 not installed). I did basic setting in Object Setting and Apprsaisals (repla = X) and created a category and a basic template (Do I need to do this if I use the predefined version?).
But when I run the iViews, I got a system dump from the pmp version ...
Access via 'NULL' object reference not possible
Error Code: ICF-IE-http .....RABAX_STATE -e: OBJECTS_OBJREF_NOT_ASSIGNED_NO
I checked sap note 1319829 but our basis guy said we are ok with sap basis level (level 7)
... and this error from the flexible version:
The Web Dynpro application was called up with the wrong URL parameters
I checked some related notes about OBN configuration but they are only for EHP4. I've very little about EHP5. And from what i found, the EHP5 PMP version already takes care of OBN configuration in the iviews and launchpads.
BF and extension sets are all on as far as I can see.
My questions are: is BP ESS 1.4 needed to run appraisal for EHP5? Is Object setting configuration needed for EHP5 (predefined) which is abap based, since whe I tried the template (web layout), it shows BSP sicf bsp services not activated.
Thanks

Hi Luke
May i request your help on below issue (I hav already raised a thread with heading "Infotype 24 - Appraisal Document not visible for Appraisee - Urgent"
I have following scenario in PMS (not using Talent Management)
I am using Flexible PMS (Objective setting & Appraisals) with setting " HAP00 REPLA as A".
HR is triggering the template through PHAP_CREATE giving Appraisee, Appraiser and Reviewer.
After that, i am logging in through Appraisee id in the ECC and trying to see the document in Infotype 0024, tab (Appraisal where Appraisee / Appraiser)
but i am not able to see the document however i am able to see the document for Appraiser in Infotype 0024, tab (Appraisal where Appraiser) when logging in through appraisers id in ECC
May i request your expert opinion regarding the above mentioned issue.
Note: Status Flow in Appraisal Template is correctly defined.
Rgds
AJ

Similar Messages

SAP ESS ABAP Service links not working

Hi Experts,
I am setting up SAP ESS EHP5 with EP 7.3. The overview page is working but nothing happens when clicking on the service links, and this info message is generated for each click:
Deprecated scope of type SERVERSESSION_AT_LEAST_ONE_APP_SCOPE is used! Please replace the usage of scopes with new mechanism based on "Cross application session communication API".
The permission for root folder and system connection includes Everyone with end user right.
We installed all required packages and components as below and assigned a copy of the composite role SAP_EMPLOYEE_ESS_WDA_1 to the testing user (with country-specific roles removed except for Canada).
Business Package for Employee Self-Service (WDA) 1.50
Business Package for Common Parts 1.51
SAP ESS 633
PCUI_GP 633
2. SAP ERP Core Components (SAP ECC) 6.0 with the following extensions:
Human Resources Extension (EA-HR) 605
We are running ERP6 with EHP5 and EP 7.3.
Any suggestion is appreciated.
<< moved by moderator - check out the list of other forums on top of portal forum >>
Links to other forums
Edited by: Anja Engelhardt on Jan 20, 2012 3:38 PM

check below once:-
Re: Reg:Portal ess and mss links not opening in portal 7.3
Portal services not visible
Downloading and deploy ESS and MSS - Portal - SCN Wiki
How to determine the correct component combination in ESS WD JAVA - ERP Human Capital Management - SCN Wiki

Appraisal Document not opening in Edit Mode

Hi Experts,
We have implemented PMS in our EP 7.02 SP6 and BP for ESS/MSS is 1.41 version. When I am launching the Appraisal Document from Appraisal Documents (WD UI) template is getting loaded in display mode with different tabs. In none of the tab I can enter the data. Appraisal Document status is Inplanning. This is also throwing a warning message "Missing configuration for phase in current status/substatus of appraisal document".
I have all the notes for OBN navigation.
SAP Note 1272076 - Update of BP for ESS in ECC600/EhP4 for appraisal navigation
SAP Note 1463821 - Performance Management Portal Configuration
SAP Note 1416756 - OBN Configuration in Performance Management
Can any one throw some light whether any configuration left from portal end or from R/3 end.
Thanks
Murthy

You are able to open appraisal document. This means either priority/object you choose in OBN is wrong to pick wrong document
Does the document you see have content you configured in template?
OR
OBN is good but your appraisal template has issues.
Check your template configuration in PHAP_CATALOG.
Thanks,
Nag

Hyper links in pdf documents not working on iphone.

Hello,
When I view a pdf document with links, the links are not working.
Are links not supposed to work on the iphone from pdf documents or I am missing something?
Thank you in advance ... I have an iphone 4 running v4.1.
Carlos

Also having this problem: can't use links embedded in the PDF.
Is there a solution to this?
Thanks.
Paul (iPhone 4 v4.2 / iPhone 3GS v4.1

IView Appraisal Document not showing customer process step names.

the iView "Appraisal Document", after pressing the pushbutton to move to the next process step, shows the text
"status changed to 'In Review'" in the info area of the iView.
we have changed the names of the standard process steps using IMG "Define Tabs and Process Configuration for Template"
for instance we renamed "In Review" to "Progress Tracking".
the issue is the iView "Appraisal Document" still shows "status changed to 'In Review'" instead of showing "status changed to 'Progress Tacking'".
note: the names of the steps in the roadmap (on top of the iView) show correctly, it is just that the state transitions "Status changed to..." the names of steps show standard instead of customer steps.
any idea why?
Thanks,
Tiberiu

Hi,
My first advice would be to talk to customer out of this.
As a client using SAP you're using standard software which has predefined 'names' for certain things. The names of appraisal - statuses is one of them.
(I've never seen a client wanting to adopt the names of menu texts in Microsoft Office and personally I don't seen the difference. Of course, it will take some time for the client to get used to the new names but in a year or two, everybody is used to those terms).
If you don't succeed, there's no need to change programs. You'll need to change the values of the standard SAP - domain mentioed before.
Wilfred.

Hyperlinks within .pdf documents not working IMac Safari

I am working with a website that displays several .pdf documents. The documents contain hyperlinks to urls. Everything works fine in other browsers, but in Safari, these hyperlinks do not work. The cursor does not change when it enters the hyperlink space, and nothing happens if the link is clicked. I am using an IMac running OS 10.6. 8 and Safari 5.1.10. I have tried both the native (Preview) option and a plug-in. Neither makes any difference. Can anyone suggest a fix other than abandoning Safari?

I am a new user to OnLINE Adobe. My hyperlinks from Word
documents do not transfer to the PDF files. Please help!!!

Links to open another document not working on PC

I created a pdf index for a bunch of documents (pdfs and Word docs) with links to open each of the files listed in their program. Works great on my Mac and on another Mac in the house. Client cannot get the links to work on his PC with WIndows NT. I dug out an old PC which also has NT and am having the same problem. Upgraded to Reader X but the links still don't work. Any ideas about how to get the links to work on a PC? Would it work on a newer operating system?

George,
Well I do not know. I just opened the files with whatever came with the iphone.
Do you know if there is an "upgrade", to call it that or a specific viewer? or some where that you know
that I can read about it?
Converting our website to touch devices seems that there is that 1% that does not work.
Thank you
Carlos

Appraisal document not trigerring to the part appraiser ID

Hi All,
In PMS,the appraisal document is not triggering to the part appraiser's ID.It is triggering to the direct manager (appraiser ID),but the document is not visible to the part appraiser.Can anybody throw some light on the issue.Help is highly appreciated.
Thanks,
Deepti R

Resolved.

Appraisal Document not visible to further Participant

Hi Members,
I have used three participants in "category" option of Appraisal template.
1. Appraisee - Employee
2. Appraiser - Supervisor
3. Further Participant - HOD
In Enterprise Portal , i am using a BSP page (from SE80 --> BSP Application --> HAP_Document_Pa --> Pages with Flow Logic --> documents_todo.htm) in MSS, earlier the HOD was able to find the appraisal document, but for unknown reasons, now the HOD is not able to find the appraisal document.
And in criteria Group, though i have given the change option to Supervisor through element access and display option to Employee and HOD, but even the supervisor is not able to make changes in the criteria group, as the text box is displayed in grey (non editable mode).
Kindly help me know the reason and solution, so that HOD could complete his part of review from his MSS screen.
Regards

Hi Lincoln,
Thnx for responding.
Yes a separate Iview is created to call the BSP page, and we have used "documents_todo.htm" and even the supervisor (in Review) and HOD (In Process) were able to view the appraisal document as and when the statuses changes, because the BSP page "documents_where_participated.htm" shows the appraisal documents even if the document is with employee or supervisor.
About the value of i-view parameter MODE as X, do you mean "parameters to pass from Page Request (for URL isolation)" is not set as 'X', as the portal guy is not available at the moment, me being a functional consultant, i also need to fix the BSP issues through Portal.
But i want start afresh, when the appraisal document is "in planning", the document should be available with the employee, when the appraisal document is in "In review" stage, the document should be available with the Supervisor, when the appraisal document is in "In Process" stage, the document should be available with the HOD.
Plz suggest the BSP's for employee, supervisor and HOD, correct me if i need to make any corrections in the statuses or participants.
Regards
Edited by: nivedita chowdary on Jun 25, 2009 7:05 AM

Web show document not working..

Hey guys. I just recently installed the stand alone AS forms and reports server 10.1.2.0.2.. the reporting functionality is not working...
basically the application uses the reports engine to create a PDF file which is then read by the web.show_document built in. It works on the developer AS, but doesnt work for the forms and reports AS...
the link I am reading the file from looks like this..
http://<IP ADDRESS>:7777/forms/reports_output/116_rec_jan.PDF
where the "IP ADDRESS" is the IP of the sever, and "/reports_output" is a virtual directory. Do I have the wrong port or something? The file "116_rec_jan.PDF" does exist on the server so I can't see the problem...
Could it be that I dont have adobe reader on my server? Does the AS use the server's adobe reader to read the file or the client side adobe reader? Anyone know whats going on? Thanks for your thoughts.
Mo

When I was testing this, I restarted the entire server. The output URL seemed to change so im guessing the OPMN picked up the changes in the forms.conf file. How do you manually restart the OPMN? Here is the line I inserted into the forms.conf file:
AliasMatch ^/forms/reports_output/ "D:\Reports_Output"
Below is the coding I used to create the URL for web.show_document.. I bolded what was important... a lot of the coding in here has to do with the Oracle VPD, and loading parameters into the report..
PROCEDURE RUN_REPORT_FILE IS
LIST_ID PARAMLIST;
V_REP_OBJ REPORT_OBJECT;
V_REP_ID VARCHAR2(100);
V_FILE_NAME VARCHAR2(200);
V_REPORT_LOC VARCHAR2(100);
V_BTD_LOC VARCHAR2(100);
V_PRN_SEQ NUMBER;
V_PARAMS NUMBER;
V_DATE DATE;
V_NUMBER NUMBER;
V_CHAR VARCHAR2(4000);
V_VIRT_PATH VARCHAR2(100);
V_SERVER VARCHAR2(100);
V_SERVER_PORT VARCHAR2(50);
V_RPT_TAG VARCHAR2(300);
BEGIN
IF :CONTROL.FILE_NAME IS NULL THEN
IF SHOW_ALERT('MISS_FILE') = ALERT_BUTTON1 THEN
RAISE FORM_TRIGGER_FAILURE;
END IF;
END IF;
SET_VPD_CONTEXT.RECORD_PERMISSION_SET(
:GLOBAL.P_CY,
:GLOBAL.P_VW,
:GLOBAL.P_ROL,
:GLOBAL.P_PRT,
:GLOBAL.P_STR,
:GLOBAL.P_AR,
:GLOBAL.P_DS,
:GLOBAL.P_DV,
:GLOBAL.P_RG,
:GLOBAL.P_AD,
:GLOBAL.P_BY,
:GLOBAL.P_LOG);
SELECT VALUE
     INTO V_VIRT_PATH
     FROM SYSTEM_DEFAULTS
     WHERE ATTRIBUTE = 'VIRTUAL REPORTS PATH';
SELECT VALUE
     INTO V_SERVER
     FROM SYSTEM_DEFAULTS
     WHERE ATTRIBUTE = 'SERVER LOCATION';
SELECT VALUE
     INTO V_SERVER_PORT
     FROM SYSTEM_DEFAULTS
     WHERE ATTRIBUTE = 'SERVER PORT';
SELECT VALUE
     INTO V_BTD_LOC
     FROM SYSTEM_DEFAULTS
     WHERE ATTRIBUTE = 'REPORT OUTPUT LOCATION';
IF :GLOBAL.DESTROY_REPORT_LIST = 'Y' THEN
DESTROY_PARAMETER_LIST ('REPORT_PARAMS');
END IF;
SELECT VALUE
INTO V_REPORT_LOC
FROM SYSTEM_DEFAULTS
WHERE ATTRIBUTE = 'REPORT HOME';
IF :CONTROL.SAVE_FLAG = 'Y' THEN
SELECT SAVED_REPORT_SEQ.NEXTVAL
INTO V_RPT_TAG
FROM DUAL;
V_FILE_NAME := V_BTD_LOC||V_RPT_TAG||'_'||:CONTROL.FILE_NAME||'.PDF';
INSERT INTO COMPANY_SAVED_REPORTS(
SELECT V_RPT_TAG,
NODE_KEY,
FILE_NAME,
:CONTROL.FILE_NAME,
:GLOBAL.CY_COMPANY_KEY,
:GLOBAL.STR_STORE_KEY,
SYSDATE,
TO_CHAR(SYSDATE, 'HH24:MM:SS'),
:GLOBAL.ACCESS_USER,
:GLOBAL.ACCESS_USER,
SYSDATE,
:GLOBAL.ACCESS_USER,
SYSDATE
FROM SYSTEM_MENUS
WHERE NODE_KEY = :PARAMETER.SM_NODE_KEY);
ELSE
V_FILE_NAME := V_BTD_LOC||:CONTROL.FILE_NAME||'.PDF';
END IF;
LIST_ID := CREATE_PARAMETER_LIST ('REPORT_PARAMS');
V_REPORT_LOC := V_REPORT_LOC||:PARAMETER.REPORT_FILE||'.RDF';
IF :GLOBAL.BUILD_PARAMETER = 'Y' THEN
GO_BLOCK('REPORT_PARAMS');
FIRST_RECORD;
SELECT COUNT(*)
INTO V_PARAMS
FROM REPORT_PARAMS
WHERE FILE_NAME = :PARAMETER.REPORT_FILE;
IF V_PARAMS > 0 THEN
LOOP
IF :REPORT_PARAMS.PARAM_TYPE = 'KEY' THEN
:REPORT_PARAMS.PARAM_VALUE := :REPORT_PARAMS.PARAM_VALUE_DISPLAY;
END IF;
     ADD_PARAMETER(LIST_ID, :REPORT_PARAMS.PARAM_NAME, TEXT_PARAMETER, :REPORT_PARAMS.PARAM_VALUE);
EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE';
NEXT_RECORD;
END LOOP;
END IF;
END IF;
ADD_PARAMETER(LIST_ID, 'VPD_P_CY', TEXT_PARAMETER, :GLOBAL.P_CY);
ADD_PARAMETER(LIST_ID, 'VPD_P_VW', TEXT_PARAMETER, :GLOBAL.P_VW);
ADD_PARAMETER(LIST_ID, 'VPD_P_ROL', TEXT_PARAMETER, :GLOBAL.P_ROL);
ADD_PARAMETER(LIST_ID, 'VPD_P_PRT', TEXT_PARAMETER, :GLOBAL.P_PRT);
ADD_PARAMETER(LIST_ID, 'VPD_P_STR', TEXT_PARAMETER, :GLOBAL.P_STR);
ADD_PARAMETER(LIST_ID, 'VPD_P_DS', TEXT_PARAMETER, :GLOBAL.P_DS);
ADD_PARAMETER(LIST_ID, 'VPD_P_DV', TEXT_PARAMETER, :GLOBAL.P_DV);
ADD_PARAMETER(LIST_ID, 'VPD_P_RG', TEXT_PARAMETER, :GLOBAL.P_RG);
ADD_PARAMETER(LIST_ID, 'VPD_P_AD', TEXT_PARAMETER, :GLOBAL.P_AD);
ADD_PARAMETER(LIST_ID, 'VPD_P_BY', TEXT_PARAMETER, :GLOBAL.P_BY);
ADD_PARAMETER(LIST_ID, 'VPD_P_LOG', TEXT_PARAMETER, :GLOBAL.P_LOG);
V_REP_OBJ := FIND_REPORT_OBJECT('GENERIC');
SET_REPORT_OBJECT_PROPERTY(V_REP_OBJ, REPORT_FILENAME, V_REPORT_LOC);
SET_REPORT_OBJECT_PROPERTY(V_REP_OBJ, REPORT_DESNAME, V_FILE_NAME);
:GLOBAL.DESTROY_REPORT_LIST := 'Y';
V_REP_ID := RUN_REPORT_OBJECT(V_REP_OBJ, LIST_ID);
DESTROY_PARAMETER_LIST (LIST_ID);
IF :CONTROL.SAVE_FLAG = 'N' THEN
WEB.SHOW_DOCUMENT('http://'||V_SERVER||':'||V_SERVER_PORT||'/forms'||V_VIRT_PATH||'/'||:CONTROL.FILE_NAME||'.PDF', '_blank');
ELSE
WEB.SHOW_DOCUMENT('http://'||V_SERVER||':'||V_SERVER_PORT||'/forms'||V_VIRT_PATH||'/'||V_RPT_TAG||'_'||:CONTROL.FILE_NAME||'.PDF', '_blank');
END IF;
:GLOBAL.P_CY := NULL;
:GLOBAL.P_VW := NULL;
:GLOBAL.P_ROL := NULL;
:GLOBAL.P_PRT := NULL;
:GLOBAL.P_STR := NULL;
:GLOBAL.P_AR := NULL;
:GLOBAL.P_DS := NULL;
:GLOBAL.P_DV := NULL;
:GLOBAL.P_RG := NULL;
:GLOBAL.P_AD := NULL;
:GLOBAL.P_BY := NULL;
:GLOBAL.P_LOG := NULL;
COMMIT;
END;

Share Document Not Working?

Is Sharing not working? No one receives the Email invites and their entered Email address, after the invites were sent, are not listed anywhere as being currently shared. (using the desktop version which is online and shows green)

Hi,
I can understand that there are usability issue in Sharing feature. Currently, email notification is just for information. Once you share script with some one, he needs to login into Story, and then save script.
After login, the user can see notification of the shared script on the top bar in Projects view. The user then can can save the script and then can start working on the script.
Please find step by step procedures:
1. Owner (Say User1) shares the script with another user (say User2)
2. User2 received an email notification
3. User2 launch Story
4. User2 provides login and password
5. After login, user2 switches to "Projects view:
incase user2 opens "Home" Page then click on "Project" tab on the top left bar in the application
6. In the Projects view there is a mail icon, which will show all scripts (I also placed snapshot in this thread)
7. Now click on this icon, user2 can see notification of all shared scripts
8. Now user2 clicks on the script and save this script
9. Now user2 can start working on this script
Please let us know if you face any problem in this workflow. We would like to solve this problem and also try to find a way to make this feature user friendly.
Regards,
Neeraj Gupta

Internal Links in HTML Document Not Working Correctly in PDF

I have an HTML document that contains internal links (basically a Table of Contents). When the document is displayed in a browser, the internal links work correctly. However, when I use Acrobat 8 Professional to create a PDF version from the HTML source, the links don't go to the correct place when clicked. It almost appears that they are off by one, e.g., link 7 goes to anchor 8. I can send the source document for you to look at if you email me at eharris -at- synnovation.com. I am not expert in HTML and perhaps the links/anchors are not done correctly when I create the HTML document. Does anyone have any ideas on this?

This one has the same problem. For instance, "Anchor1" as <a name="Anchor1"> appears 13 times. I am sure that your problem is that Acrobat is going to the last occurance that is just before the first one. As I scan through the file I find similar results for all of the anchors. When I used Tidy, it reduces about 1350 errors to about 474, but that is still not too good. The validator is flagging a lot of identical IDs as well as unrecognized attributes (like ONSELECTSTART). The attributes correctly accepted by body are
Attribute Specifications
* BACKGROUND=URI (background image for document)
* BGCOLOR=Color (background color for document)
* TEXT=Color (text color for document)
* LINK=Color (link color for document)
* VLINK=Color (visited link color for document)
* ALINK=Color (active link color for document)
* ONLOAD=Script (document has been loaded)
* ONUNLOAD=Script (document has been exited)
as listed on htmlhelp.com for HTML 4. There may be some new ones in HTML 5, but I did not check.
I am not looking at all of your HTML in detail, but there appears to be a lot of unneeded things based on the error messages from the validator. Many browsers will let you display the stuff (even Acrobat), but there may be errors that crop in when you do not expect it or on some other browsers that the one you check. Thus again, you should use a validator. If you are only off a few tags that might be fine, but when it is in the 1000s, there is an issue. It would also be good to break your page up into parts. It is good practice on web pages for each page to be not much more than one screen. That is often exceeded, but 59 screens of info (on my screen) is a bit much. The TOC is definitely needed in that case, but just was well go to a sub page just as well and make the info easier to track. A PDF (as you are trying to get) could be made of the entire system for those that want it all in one bit. Bill

InDesign CS5.5 Documents Not Working with Drive 4.2

I am using CS 6 and Adobe Drive 4.2 (4.2.0.110) on Windows 7 with the CMIS adapter against an Alfresco v4.0.0 repository. When I double-click on an InDesign CS6 file in windows explorer, it opens in InDesign. I see the "up-to-date' status icon in the lower left in InDesign. I can edit the document and successfully check it back into Alfresco. When I try the same test case using a CS 5.5-created document, the "up-to-date" icon does not appear and I can't version the document in Alfresco.
These two documents reside in the same folder and were created by the same user in Alfresco. They are both simple documents that only contain text boxes; no external links.
The AD4ServiceManager_java.log file contains the following and was deleted before trying the CS5.5 test case:
2013/04/23 11:15:29,471 [ConnectionHandler-Adobe Drive.exe-3732] INFO GetConnectorInfoHandler - -->In()
2013/04/23 11:15:29,545 [ConnectionHandler-Adobe Drive.exe-3732] DEBUG IconHelper - Configuring Win volume icon.
2013/04/23 11:15:29,548 [ConnectionHandler-Adobe Drive.exe-3732] INFO GetConnectorInfoHandler - -->Out()
2013/04/23 11:16:24,222 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/irml.dll
2013/04/23 11:16:24,449 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/adobe_licutil.exe
2013/04/23 11:16:29,224 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/tes8E12.tmp
2013/04/23 11:16:29,245 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/tes8E12.tmp
2013/04/23 11:16:29,265 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/tes8E12.tmp
2013/04/23 11:16:29,992 [JobHandler-2] ERROR GetAssetById - Caught exception
com.adobe.drive.data.model.DriveException: com.adobe.drive.data.model.asset.ModelObjectNotFoundException: Cannot find class com.adobe.drive.data.internal.model.Asset with id='70'
    at com.adobe.drive.data.model.asset.DeprecatedAssetFactory.findAssetById(DeprecatedAssetFact ory.java:42)
    at com.adobe.drive.internal.data.manager.DataManager.getCachedAsset(DataManager.java:1786)
    at com.adobe.drive.internal.biz.versioncue.service.call.GetAssetById.executeItem(GetAssetByI d.java:59)
    at com.adobe.drive.internal.biz.versioncue.service.call.GetAssetById.executeItem(GetAssetByI d.java:1)
    at com.adobe.drive.internal.biz.versioncue.service.call.VersionCueCall$1.run(VersionCueCall. java:125)
    at com.adobe.drive.internal.biz.versioncue.service.call.VersionCueCall$1.run(VersionCueCall. java:1)
    at com.adobe.drive.data.internal.persistence.PersistenceRunner.run(PersistenceRunner.java:11 9)
    at com.adobe.drive.internal.biz.versioncue.service.call.VersionCueCall.execute(VersionCueCal l.java:137)
    at com.adobe.drive.internal.biz.versioncue.service.VersionCueService.getAsset(VersionCueServ ice.java:234)
    at com.adobe.drive.ncomm.versioncue.GetAssetById.handle(GetAssetById.java:54)
    at com.adobe.drive.ncomm.versioncue.VersionCueRequestHandler$1.run(VersionCueRequestHandler. java:185)
    at com.adobe.drive.core.internal.jobs.JobHandler$JobWrapper.run(JobHandler.java:270)
    at com.adobe.drive.core.internal.jobs.JobHandler$JobWrapper.run(JobHandler.java:286)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
Caused by: com.adobe.drive.data.model.asset.ModelObjectNotFoundException: Cannot find class com.adobe.drive.data.internal.model.Asset with id='70'
    at com.adobe.drive.data.persistence.factories.AssetFactory.findAssetById(AssetFactory.java:2 44)
    at com.adobe.drive.data.model.asset.AssetFactory.findAssetById(AssetFactory.java:69)
    at com.adobe.drive.data.model.asset.DeprecatedAssetFactory.findAssetById(DeprecatedAssetFact ory.java:38)
    ... 15 more
2013/04/23 11:16:31,820 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/Document fonts
2013/04/23 11:16:31,839 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/Document fonts.lnk
2013/04/23 11:16:31,859 [IFSConnection-1] ERROR GetAssetsHandler - asset not found: /User Homes/mjackson/Document fonts.URL
Thanks,
Rich

they are Right it checks to see that the OS name is Windows XP i assume and it finds the windows but NOT the xp so it just assumes it is 98.... just my theroy
well not any more.!!! take a look and see ....
private static LookAndFeelInfo[] installedLAFs;
    static {
        ArrayList iLAFs = new ArrayList(4);
        iLAFs.add(new LookAndFeelInfo(
                      "Metal", "javax.swing.plaf.metal.MetalLookAndFeel"));
        iLAFs.add(new LookAndFeelInfo("CDE/Motif",
                  "com.sun.java.swing.plaf.motif.MotifLookAndFeel"));
        // Only include windows on Windows boxs.
     String osName = (String)AccessController.doPrivileged(
                             new GetPropertyAction("os.name"));
        if (osName != null && osName.indexOf("Windows") != -1) {
            iLAFs.add(new LookAndFeelInfo("Windows",
                        "com.sun.java.swing.plaf.windows.WindowsLookAndFeel"));
            if (Toolkit.getDefaultToolkit().getDesktopProperty(
                    "win.xpstyle.themeActive") != null) {
                iLAFs.add(new LookAndFeelInfo("Windows Classic",
                 "com.sun.java.swing.plaf.windows.WindowsClassicLookAndFeel"));
        else {
            // GTK is not shipped on Windows.
            iLAFs.add(new LookAndFeelInfo("GTK+",
                  "com.sun.java.swing.plaf.gtk.GTKLookAndFeel"));
        installedLAFs = (LookAndFeelInfo[])iLAFs.toArray(
                        new LookAndFeelInfo[iLAFs.size()]);
    }the OS is Windows but the XP theme is NOT on the computer!! so it goes back to cassic. hope this helps you,
ps that was code from UI Manager 1.5

Why is my Microsoft Word document not working correctly with Pages

I have created a new CV (Resume) in Microsoft Word on my work computer, it is using the latest version of Office. When I attempted to open the document in Pages on my home Mac, the formatting was slightly incorrect, but the main issue is it is missing two pages! The exact same document when opened in Word has three pages but in Pages, it only has one! I have had nothing but problems with Pages since I bought it! Can someone please help me get Pages to work correctly with my documents that are created in Word! Than you.

Pages does not allow a single cell in a table to span more than a page and there may be other problems that you also have not told us about.
Redo your CV using the excellent Pages templates, Word's templates are Uuuugly!
Being text based, with good typographical layout, those Pages templates should translate accurately back and forth from Pages to Word.
Frankly CVs don't require anything fancy. You could do an excellent, well laid out and very attractive CV in TextEdit which is no slouch in the word processing department.
Peter
PS Start off by saving your Word CV to .rtf or .txt which will strip off most of the bad formatting. Then reopen it in Pages or drag in the snippets of text into a Pages CV template's placeholders to automatically format the text nicely.

Forwarding document (not work item) from specific SAP workflow to Outlook

Hi,
We are looking for ways to forward the email notification of leave approval from SAP inbox to MS Outlook.
One way I know of is to create Auto forwarding in SAP inbox, however this would forward all documents received regardless of the work flow.
Would appreciate it if any one out there could share your experience.
Thanks.
Siew May

Use program RSWUWFML2. You can get pretty fancy with it to setup wrapper text. I have used it a lot so feel free to ping me with any questions.
What is important to know is normal 'email' forwarding will not send workflow items. I use this every 15 minutes to forward to Outlook and get the users into the Portal to manage the workflow.

ESS EHP5: Appraisal document not working

Similar Messages

Maybe you are looking for