ESS integration with E-Recruiting - issue w WDA Favorites & MyApplications

Hi all,
We are implementing E-Rec 6.0 EhP3 and ESS EhP3 on 2 different boxes.
In ESS, the services for 'Recruitment' such as Job Search, My Profile, Apply Directly etc are easily intergrated within the iviews by supplying the URLs from E-Rec's SICF (Right-click, Test service, retrieve URL)
However, for the other 2 ESS services - Favourites & My Applications - in E-Rec, these 2 components (HRRCF_C_JOB_FAVO_UI & HRRCF_C_APPLICATIONS_UI) do not have the 'Application' in SICF/SE80 that I could 'test service' and generate its unique URL.
Are there any patches, fixes, or workaround to enable Favorites & My Applications services in E-Rec to be called within ESS without any development?
Thanks guys.
Azman

Have
Applications
Favourites
Been replaced with WD ABAP application in EHP3 E-recruitment ?
If so then you must undertake you own integration of EHP3 E-recruitment applications to ESS Business Package - technically it should still be possible to call WD ABAP applications from ESS pages (or iviews) in the same way as it is possible to call
BSPs from ESS pages (or iviews) - it should also be possible to define and call any URL via service links anywhere in the ESS pages if required
Best wishes
Stuart

Similar Messages

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Intel vPro AMT integration with SCCM 2012R2 - Issues with SCCM finding the "ConfigMgr AMT Web Server Certificate"

Good evening all,
I'm attempting to get Intel SCS integrated with SCCM 2012 R2 and I have both sides working, doing what they do best, however, I have issues when I try to mate the two. I started with a single server for the site and then tackled the Intel side with success,
then I added another site server to run the Out of Band service point and Enrollment point. Up until this point I've had no issues with certificate templates, or issuance of those certs.
I have re-read the TechNet documents a few times regarding the PKI setup, some Intel documentation and three step by step articles and non of them seem to differ so I can't understand why I'm unable to choose my "ConfigMgr AMT Web Server Certificate"
when configuring the Out of Band Management Component Properties page. The "AMT web server certificate template:" dialog shows my CA FQDN and CA name, but the certificate template list is always blank. I've tried this from both the remote
and local ConfigMgr consoles. The site servers have rights on the CA to manage and issue certs, is there something I'm missing that isn't in the documentation or buried somewhere that I missed? Is there a Application policy that should be on the
cert that isn't mentioned anywhere?
Thanks in advance!
Tesfaye

Hi Joyce,
Thanks for responding. I pretty much have this error repeating in the log file and not much else:
[28, PID:13388][05/21/2014 15:17:15] :System.DirectoryServices.DirectoryServicesCOMException\r\nThere is no such object on the server.
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne)
   at System.DirectoryServices.DirectorySearcher.FindAll()
   at Microsoft.ConfigurationManagement.AdminConsole.Common.ADUtils.EnumEnterpriseCACertificateTemplates(String domainEntryName, String certAuthorityFqdn, Boolean isServerAuthen)\r\n
I will look into this, but another hint would be greatly appreciated!
Thanks,
Tesfaye

New id integration with ipad 2 issues

I recently changed my apple id. Had issues integrating new id with iphone 5 and ipad 2. Got advice to correct and it worked on the iphone, but not on ipad. Im unable to access Appstore or itunes. Old user id still pops up. Icloud settings on ipad are set to my new id.

What id shows in Settings > iTunes & App Store on your iPad ? If it's wrong then tap on it and log out of your account and then log back in with the updated version of your account.
If you created a new account as opposed to your existing account, then your existing downloads will remain tied to your old account, so only that old id can potentially redownload its past purchases and/or download updates to its apps.

SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Regarding error in ESS integration with EP

Hi,
We are currently integrating ESS 60.2 (mySAP ERP 2004) business package with portal EP6.0 (SP14).
We were able to view the workset and all the pages like Employee Search, Personal Information etc.
But when we click on the links in that page, we are getting a javascript error stating <b>object required</b>.
Also, when we click any of the links we are getting an error stating <b>Personnel number not yet assigned</b>.
We have already assigned the personnel number in transaction PA30 for the user and we had also set the validity of user id.
Still we are facing the same problem.
Its very urgent.
Can anyone help us to solve the problem?
Any help would be much appreciated.
Thanks in Advance.
Regards
Yoga

Hi Yoga,
and you have user mapping for same user for which u have done prnr number settings?
can you cross check that in your r/3 system.
Subhash

EP60 and LDAP integration with Micosroft AD- Issues

Hello,
We have configured EP6 SP11 and Microsoft AD for the user authentication as below.
MsAD:
AD_Compass_Domain
OU= Accounts
    OU=CORPORATE
          OU=IT
                User1 (User master record)
                 User2 (User master record)
            OU=FI
                 User3 (User master record)
OU=SAP_Portal
       OU=Corp_LDAP
             OU= Groups
                      SAP_Portal (Group Object and users are member of this group object as a link from all different OUs -user1,user2,user3)
              OU= Users
EP6 LDAP config:
Data Sources: Microsoft ADS (Flat Hierarchy) + Database
(We also tried Deep hierarchy didn't work)
LDAP Server:
User Path : OU=SAP_Portal,DC=NA,DC=CompassDev,DC=Corp
Group Path :
OU=Groups,OU=Corp_LDAP,OU=SAP_Portal,DC=NA,DC=CompassDev,DC=Corp
The issues:
1- SAP Portal could not see the group object when I browse the LDAP from portal.
2- SAP Portal is not allowing users (User1, User2, User3 etc which are member of the group object) to log in to the portal unless I put users directly under OU level like OU=Groups or if I point the path to the
OU=Accounts level which we do not want to do that because we have 50,000 users defined under OU=Accounts and we want just some of them like 3000 users. Portal gives the message
user authentication failed
Note: I checked the UME and I dont see the users listed in the group objects. Group object "SAP_Portal" is Universal Group object. (We also tried the global type)
3- When we put user directly under OU level, then users can log in but they are not able to change their password. We also can not change the user passwords through the Portal admin tools(UME or Visual Admin). I
have heard that without SSL, MsAD would not allow portal users to change their password.
a. (Portal internal user, [email protected], has
only read access on MsAD)
Note: We use 3268 as an AD port and 389 is also active I tried both of them but no chance.
Thanks for your help in advance.

Sasikanth,
Usually before you switch UME to AD, you would read it with an LDAP web compliant browser, to check if you could access your OU, Group, and Users. Are you sure you can read the complete LDAP structure on AD?
Kindly re-check the process, to see if you missed out on any steps.
http://help.sap.com/saphelp_erp2004/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
Check note 772620 - UME 4.0: Create Groups on Microsoft Active Directory Server
Regards,
James

Portal integration with Exchange SSO issue

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain. The latest Kerbmap filter is configured in the Exchange back end server. Everything works fine when we do User Mapping.
The SSO for Outlook Web Access works fine when pointed to the exchange back end server directly.
The SSO for groupware functionality such as appointments doesn't work. The error message is "No logon data found for system Exchange". The Exchange system is configured for SAPlogontickets and so i don't understand why its looking for user mapping.
Anyone faced a similar problem? does anyone made this to work using SSO?
Thanks,
~Yasin

hi Mannings,
there will be a new business package for SEM which will be relased and will be based on Web Dynpro. They will create views for integrating BPS, BSC etc for you by default and with the Portal Look and Feel too. But you might have to wait a while for that. AS for SSO - SSO tickets are absolutely supported and fine.
Currently you can use BSP iviews to integrate SEM BSP applications into the portal.
For Integrating BW in portal, the steps you have mentined are for information boradcasting from BW. A very simple way would be to create BW reports based iviews and just supply the query string for the bw report to be integrated. For transactions and other areas you can use the internal ITS provided with 640.

SAP Lumira Integration with ESRI Maps Issue

Hello,
I have created free trial ArcGIS online account and specified this user in SAP Lumira 1.20 build 36 Preferences / GEO Map Service.
But when I try to visualize my Location data on Geo Map visualization I get an error message "Not a subscription user".
Did anyone encountered this message? Maybe this message is related to Trial account type?
Looking forward your feedback.

Hi Manfred,
Have you restarted Lumira? Also watch out for proxy configuration. see Lumira Timeout connecting to ESRI
Good luck, and update the post with news!
Regards,
Antoine

SAP E - Recruitment Integration with SAP PA ES Module

Hi all,
I have SAP Recruitment Application to be integrated with SAP PA_ES Module (SAP HR) through XI..
Now I have 2 questions;-
1.Does SAP recommends both the above mentioned applications on same SAP BOX ie the system will have both the application with the different clients on SAP system or a sort of addon...If yes , how the integration can made?
2.What is recommended/Suggested scenario for integration i.e. which adapters shall be used for this configuration??
it would be really very helpful if someone could throw some light on this
Regards,
AshwinM

Aswin
Why dont you check the following thread for more info
E-Recruitment
regards
krishna

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

Third Party Recruitment Software integration with SAP HR

Dear Experts ,
Iam given a scenario where in the client wants the Erecruitment software Taleo to be integrated with SAP HCM.The HR recruiters/Managers are currently hiring them into the taleo software and from there the data need to be pushed to the SAP employees's infotypes.
In Addition to this the benefits infotype need to be maintained automatically in the system.Is there any way to automatically default the benefit infotype also
Kindly suggest a solution for this.
Regards
Gopa

You will need interface(s) between Taleo and SAP....If Taleo is your recruiting system...then they may want...
Outbound from SAP: Interface that sends them vacant position data from SAP (you need this so that when Taleo sends you finally an employee data after hiring they can send you the position data with it).
Outbound from SAP: You may also need to send them terminations from SAP (optional - may be needed depending on your company process for handling rehires)
Inbound to SAP: This is the main file from Taleo after offer is accepted and employee is hired in Taleo. At this time Taleo will send you a file for which you can write an interface to hire these employees into SAP. You can do a BDC session with PA40 - you may have to determine if its a hire or rehire here. If you are processing payroll then its important to make sure you have all the payroll related info types (if they are not coming from Taleo then you should at least have them defaulted to what your client agrees).
The second part to your question
Creating benefits depends on how you are getting or determining benefits data.
1. Benefits configuration has something called automatic/default plans...
>>> "Automatic" plans are something employee is enrolled into and has no option to change them.
>>> "Default" plans are something employee is enrolled into on new hire and typically has 30 days to make changes...this is standard configuration for each plan and should be completed.
If it is controlled via benefits config then you just need to go through hire action...and typically as part of that hire action - IT0378/IT0171 will prompt you to go to benefits enrollment screen and enroll employee...into these automatic/default plans...plans will be pre-selected based on configuration. So all you do here is hit save and continue with rest of hire action. All this is recordable via BDC session.
2. If it is NOT controlled via configuration...and you are getting benefit plan details in the file then you just create them in the corresponding info types...IT0167/0168 etc. For processing sanity I would separate hire and benefits creation as two step process if all the data is coming via files...
Happy interfacing...

Integrating with Oracle EBS using XMLGateway issues

Hi all,
I'm trying to integrating with Oracle EBS using XMLGateway, and I meet some issues. Here are the steps I did.
1) Update DATA_MAP.xgm file and DATA_TEST.dtd file into XMLGateway repository
2) Define transactions in EBS client:
Party Type: Supplier
Transaction Type: Cat
Transaction Subtype: Dog
Transaction Description: test for cat and dog
Standard Code: OAG
External Transaction Direction: IN
External Transaction Type: Cat
External Transaction Subtype: Dog
Queue: APPLSYS.ECX_IN_OAG_Q
3) Define trading partners in EBS client
Operating Unit: Vision Operations
Trading Partener Type: Supplier
Trading Partener name: ****
Trading Partener site: ****
Company Admin email: [email protected]
... other transaction info defined in step 2)
4) Send inbound message using OTA send Inbound Page. It succeed.
a. The return page display status code 1000 with status discription OK.
b. From the transaction monitor, I can see the inbound message was processed successfully.
c. From the database, I can see that this inbound message first arrived in ecx_inqueue table, and then moved to ecx_in_oag_q_table. And last disappeared from the ecx_in_oag_q_table. That means XMLGateway process the inbound message in transaction queue successfully.
5) Send inbound message using SOAPUi. It failed.
a. The return page display status code 200. That means the inbound message has been sent to inbound message queue successfully.
b. From transaction monitor, I cannot see this request record.
c. From the database, I can saw that this inbound message first arrived in wf_ws_jms_in table, then disappeared. It didn't moved to transaction queue which I selected when defined transations, so I guess it wasn't processed by XMLGateway. Using the following SQL, but cannot find error reason.
select * from ecx_inbound_logs where process_id='******************'
select * from apps.ecx_error_msgs where error_id='*****'
I guess the reason is something happend to prevent inbound message to move from inbound message queue to transaction queue. So XMLGateway cannot process this inbound message.
From XMLGateway user guide, I understand that there are three kinds of inbound queues(ECX_INBOUND which OTA uses, WF_WS_JMS_IN which soap over https uses, WF_JMS_IN which JMS uses), does't mention what are the corresponding transaction queues? Can they share the same transaction queue? Also see from this user guide, ecx_in_oag_q (transaction queue) is only for ecx_inbound queue. But when I try to define a transaction in EBS client, it seems that only ecx_in_oag_q can be chosen. I wondered why my second senarios failed when I used the same transation and trading partner. The message already arrived at wf_ws_jms_in and then disappeared. Is that because I selected the wrong transaction queue when defining transactions? But it was really cannot select any other transaction queues there. Or I missed some steps when using SOAP over HTTP/S?
Appreciate you can give me some suggestions. Hope to hear your voice. Thanks in advance.

Hi,
Regarding the integration what type of integration you want.
Can you please elaborate?There are some integration tools releases by Oracle for the integration.
Regards
Pramod

Integration of E-Recruiting solution with Portal

Hi All,
I am working on E-recruiting integration with Portal.
If any of you have already done this before. I am not not able to get any business content for the same.
I wanted to know how we should start. I already have config document for E-rec 3.0
Thanks for your time,
Regards,
Sudhir

Hi Sudhir,
Kind Request....
Can you kindly mail me the E-Recruitment Configuration Document, Which you have mentioned in your previous posting...
You can mail it to [email protected]
Thanks in advance....
Regards,
Raghav

Language determination when WDA application is integrated with Portal

Hi,
How does the language determination work when WDA application is integrated with Portal?
Thanks.
Chitrali

Hi,
Please check out this link -
http://help.sap.com/saphelp_nw04s/helpdata/en/7b/fb57412df8091de10000000a155106/content.htm
Regards,
Lekha.

ESS integration with E-Recruiting - issue w WDA Favorites & MyApplications

Similar Messages

Maybe you are looking for