Essbase 11.1.1.3 Perormance Issue on windows 2003 64bit

When I run a calculation script on the essbase 11.1.1.3 which installed on windows 2003 64bit, it takes me 100 seconds to finish it. But when I run the same calculation script with the same data, same database OTL and same database configuration on essbase 9.3.1 which installed on window 2003 32 bit, it only takes me 50 seconds to finish it. It means essbase 11.1.1.3 have some Perormance Issue on windows 2003 64bit? or can anybody help me to make the essbase 11.1.1.3 intalled on windows 2003 64bit as fast as the essbase 9.3.1 installed on window 2003 32 bit?
Edited by: user10552229 on 2010-7-10 上午1:12

If you set all of the configurations the same as your 32-bit server, you may not be properly optimized. There are a couple of ODTUG Kaleidoscope presentations that talk about 64-bit optimization:
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=11&pg_max_rows=10&pg_rows_fetched=10
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=48&pg_max_rows=10&pg_rows_fetched=10
You have to be at least a (free) Associate Member of ODTUG to download these presentations but, if you are serious about Essbase, you should be a (full) ODTUG member anyway.
Tim Tow
Applied OLAP, Inc

Similar Messages

Essbase 11.1.3 Perormance Issue on windows 2003 64bit

When I run a calculation script on the essbase 11.1.3 which installed on windows 2003 64bit, it takes me 100 seconds to finish it. But when I run the same calculation script with the same data, same database OTL and same database configuration on essbase 9.3.1 which installed on window 2003 32 bit, it only takes me 50 seconds to finish it. It means essbase 11.1.3 have some Perormance Issue on windows 2003 64bit? or can anybody help me to make the essbase 11.1.3 intalled on windows 2003 64bit as fast as the essbase 9.3.1 installed on window 2003 32 bit?

If you set all of the configurations the same as your 32-bit server, you may not be properly optimized. There are a couple of ODTUG Kaleidoscope presentations that talk about 64-bit optimization:
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=11&pg_max_rows=10&pg_rows_fetched=10
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=48&pg_max_rows=10&pg_rows_fetched=10
You have to be at least a (free) Associate Member of ODTUG to download these presentations but, if you are serious about Essbase, you should be a (full) ODTUG member anyway.
Tim Tow
Applied OLAP, Inc

MAC (10.6.8) users having permission issues with windows 2003 AD and NetApp SAN environment.

I have created a cifs share that is being accessed by Mac users that are part of a windows 2003 AD. When the user edit data and save it back to the share, the security permission are reset and none of the other users can see the new data unless the permissions are refreshed on the windows server. I have found following links that talk about a similar issue but with an older MAC OS. I am using 10.6.8.
https://discussions.apple.com/thread/1776934?start=0&tstart=0 (Max OS X doesinfluence ACL's on CIFS on 10.5)
http://www.macwindows.com/snowleopard-filesharing.html#033010b(Max OS X 10.6.3 fixes saving issues on CIFS)
Any help will be appreciated.
Thanks,
Manu

This is a 'known problem' as discussed on the MacWindows site, see http://www.macwindows.com/More-on-OS-X-conflicts-with-Windows-Server-Deduplicati on.html
It appears to still affect Mavericks 10.9.5 at least from the lack of any positive reports to the contrary. It is perhaps a bit late but it would have been worth signing up for the public beta of Yosemite and testing that and if needed reporting it as an issue for Yosemite as this will be getting more bug fix attention than Mavericks now.
I would agree turning off de-duplication is not a desirable solution, however other possibilities to consider are installing the standard Samba software on a Mac and using that instead of Apple's SMBx software. This is done by using the SMBup installer See http://eduo.info/2013/07/13/smbup-faq it does not officially list Mavericks but I did see at least one report that it still worked. A second possibility is to install ExtremeZ-IP which installs an AFP server on to your Windows Server and also gives the bonus of supporting Spotlight searches.
Note: You should only try SMBup on a test setup first.

Multiple RDS Device CALs Issued through Windows 2003 RDS Hosts

Environment
Windows 2012 R2 RDS license server issuing device CALs
5 Citrix farms (PS4, PS4.5, XA5, XA6, and XA6.5)
Symptoms
- RDS device CALs issued through the PS4/Windows 2003 R2 and PS4.5/Windows 2003 R2 servers show the Citrix server name in the Window 2012 R2 RD license manager console instead of the workstation name (See below).
- The PS4/Windows 2003 R2 and PS4.5/Windows 2003 R2 servers are issuing a large number of device CALs to workstations. For example, we have two PS4/Windows 2003 R2 servers that publish a single application. There are 20 users
of the applications with dedicated workstations that should all have a device CAL, but everyday I see device CALs being issued from these servers (See below).
Any help would be greatly appreciated. Thank you.
Scott

Hi Scott,
Thank you for posting in Windows Server Forum.
Have you find any Error\Event Id for this case?
From the description it appears that there is some misconfiguration for redirecting the server during load balancing the device CAL among the server and that’s why device is getting misplaced. You can please relook at configuration for License server with following
article.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

27" i7 - HDCP issue in Windows 7 64Bit

Hi,
I have a LG External Blu Ray Writer connected via USB. When I installed Windows 7 (Bootcamp) 64 Bit, everything appeared to work - mouse, display, sound etc. However, when I attempt to play a Blu Ray I get a HDCP error. It advises me to install a 'BD Advisor' tool that came with my CyberLink Blu Ray Playback software. It tells me that the video card AND display are not HDCP compliant... but why not? Surely they are - the ATI 4850m card should be and the iMac BETTER BE!
I dont want to use Any DVD HD as I should not need to.
These guys got it working on 32 bit Vista:
http://www.cnet.com/8301-18603_1-10381850-73.html
So I guess its a driver issue? I hope...
Neil

Boot Camp does not officially support Windows 7 yet, although Apple said it would by the end of the year, which is pretty close now
http://support.apple.com/kb/HT3920
You may want to post in the Boot Camp category as well, if you have not already
http://discussions.apple.com/category.jspa?categoryID=237

HP Pavillion dv6 notebook audio recording issue! (windows 7, 64bit)

Hello! This is my first post here, as this is my first issue with this computer. My microphones won't pick up any sound- this computer has two different ones, an integrated one and an outer one, and yet neither work. Troubleshooting only picks up whether they're enabled or not, and I've tried recording after enabling them and disabling them, restarting, etc. I've checked with Beats Audio and they're turned on there as well, and the drivers say they are up to date. Yet nothing is working, when I used to voice recognition test it wouldn't even pick up any outside audio.
I should note that the webcam doesn't work as well, because when I bought it, it would disconnect the internal camera often, and when trying to fix it, someone uninstalled the driver or something - though at the time, audio still recorded just fine and I didn't need the webcam.
IDT High Definition Audio CODEC
Intel(R) Display Audio
If any other information is needed, please let me know! Thanks for everything.

Hello katrapezo. I understand you're having some trouble recording audio.
Have you tried recording in another application such as Sound Recorder?
I'd also like you to remove your audio drivers and allow Windows to reinstall them. Here are the steps.
Click Start, type "Device Manager," and press Enter.
Expand the "Sound, video, and game controllers" section.
Right click on your sound card and select "Uninstall."
Reboot your computer.
Verify whether the problem persists.
Also, what is your notebook's product number? This document can show you where it is located.
Have a wonderful day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Wifi Sync issue with Windows 7 64bit

Hi, having an issue with wifi sync for some reason. I am running Win 7 64bit, and I have tried everything on these forums with not luck. It is not my router because it works on another computer with no problem. I have enabled all ports, syncserver, etc. and nothing is working. I have done a complete uninstall, registry clean, and reinstall with no luck. I have noticed though on my computer when I check the box to allow my wifi sync to be enabled, all the box says is "Sync with this Iphone over....." It does not say "sync with this Iphone over wifi". The other computer I tried wifi sync with that worked said "sync with this Iphone over Wifi" Any thoughts on what would cause my itunes to not display the full message? I am using Itunes 10.6

I don't like using wifi sync at all. Even with my iMac often does not detect my iPhone or my iPad when they both have Wifi turned on all the time. Even when it does work the sync speed is pretty horrendous. Anyways I'd recommend physically plugging it in whenever you can. Save you some time and trouble.

Installation issues on Windows 2003, Xeon processor and Oracle 9.2 (64 bit)

Hi all,
I am using a xeon 4 CPU machine with Windows 2003 (64 bit). I just downloaded Oracle 9.2 (64 bit) and found that it needs Itanium processor. Is this an absolute requirement? Can I still run it on xeon? What are the problems?
Mahendra

Re: 64 bit Oracle on Windows: which one to use?

Cf11 installation issue on windows 2003 R2 : installer crashes

Below are the steps I went through :
. download the installer exe (ColdFusion_11_WWEJ_win.exe) : 571 106 928 octets
. launch it --> nothing happen (I can see in tasklanager some cpu activity during few seconds then nothing)
. then I have tried to open the archive with 7zip and I have found two directories : windows and InstallerData
. then I have tried to execute "windows\adobe_cf.exe" and I got immediatly the message : "Impossible to execute LaunchAnywhere - Error Windows 2 when loading Java VM"
My java version is :
java version "1.7.0_55"
Java(TM) SE Runtime Environment (build 1.7.0_55-b14)
Java HotSpot(TM) Client VM (build 24.55-b03, mixed mode, sharing)
Thank you for your support.
Pierre.

Hi Pierre,
Please try the following Steps :-
1. Launch Command prompt as Administrator.
2. Navigate to the location of ColdFusion 11 installer.
3.Type the command as shown below in the command prompt and press Enter
4. The installer will launch. Please follow the onscreen steps further.
Hope this helps.
Regards,
Anit Kumar

Voting disk issue in Windows 2003 server

I installed oracle RAC 10g with ASM on windows server 2003 R2. I was able to successfully install clusterware as well as ASM with database. Prior to the install, I ran diskpart and then set automount enable. I was able to configure the ocr, ocrmirror and votedisk without any problem. After completion of the installation and then restarting both the nodes, looking at the Disk Management from the Computer Management, my first node is showing the partition for votedisk as raw disk but on the second node, I am seeing drive letters configured for the votedisks. I ran crsctl query css votedisk on both the nodes and both the nodes are pointing to the same location, \\.\votedsk1, \\.\votedsk2 and \\.\votedsk3.
Now my question is why am I seeing the drive letter(s) (G:) for the drives that were configured to votedsk from the second node and not seeing the drive letters from the first node?
Can I change the drive letter that were configured for voting disks from the second node?
I did take a backup of the votedsk using ocopy, but can this be a valid backup if I clear the drive letter on second node and then restore from the backup? I appreciate any help to correct this problem. Thanks

I can perform delete and add another voting disk, But what about the drive letter that is showing on the second node and not on the first? Do I need to remove the drive letter showing on node 2 while the voting disk is still showing up prior to performing the delete and add of another voting disk? Thanks for your help.
Edited by: user8769472 on May 25, 2010 3:43 PM

Acrobat 8 issues on Windows 7 64bit

Hello,
I am thinking about switching to Windows 7 64bit soon, so I tried to install CS3 on the RC. Unfortunately Acrobat 8 doesn't seem to work properly on that operating system (I tried reinstalling or repairing it several times) - even after installing all updates. The Office 2007 plugin as well as the Internet Explorer plugin keep popping up error messages or crashing while generating pdfs and Firefox can't even display pdfs inside the browser.
Is there a solution to this problem?
Regards,
Fabian

Now that Microsoft 7 is out as REAL software, how will I get updates for Acrobate 8? Currently, I can't install Acrobat 8 on my new laptop with MS 7 because it is looking for a VISTA .dll file.
Am I going to have to pay $300 or $400 on a full version of Acrobat 9 (or 10) that will be compatible with MS 7?

Essbase 64 bit on Windows 2003 Server: recomm. Hardware for Calcparallel ?

Hi,
1 year ago, we migrated to system 9.3.1 for Hyperion Planning - as usual, this includes Workspace, Financial Reporting, Financial Analysis, SmartView, Shared Services...
everything is running well on acceptable speed and in general 2-3 times faster than our old environment- essbase 7, planning 4 on (HP DL580 G3 windows 2003 32 bit servers, with each 4 Xeon monocores @3 Ghz)
we decided 1 year ago for 3 windows servers, each with 2 Xeon quattro-cores (=8 cores @ 3.0 Ghz)
1st server Financial Reporting + Workspace (Windows Server 2003 SP2, HP Proliant BL460C G1 with 2x Quattrocore Xeon E5450 3.0 Ghz) 8 GB RAM
2nd Server Planning+Shared Services (Windows Server 2003 SP2, HP Proliant BL460C G1 with 2x Quattrocore Xeon E5450 3.0 Ghz) 4 GB RAM (8 GB would have been better)
3rd Server 64 Bit Windows 2003 with Essbase (Windows Server 64 bit SP2, HP Proliant DL380 G5 with 2x Quattrocore Xeon X5450 3.0 Ghz) 16 GB RAM
as our planning application is quiet big and we run a lot consolidation & datacopy at night, we depend on parallel calculation.
We mainly use command calcparallel 4 - but on 64 bit system, calcparallel 7 should be possible as well
We plan now to extend the system for other regions/2nd application
My Question: the new consultant confused me today, that essbase would regard 1 physicial quattrocore processor as 1 core for parallel calculation - that a machine with just 2 physical cores is not a really powerful machine... and that we better think about new hardware- that a quattrocore is just 1 core for essbase analytics - is this true ???
so did we actually choose a weak environment with only 2 (Quattro)-cores) for Essbase ?
Can anybody confirm if there is a difference for essbase between having e.g. 4 Dualcores and 2 Quattrocores ? (Besides the fact, that it will cost more, as we have to lease a bigger Server with more processor-sockets- and that it will cost a lot efforts to get the system changed)
P.S.: EAS console shows 8 cores for the Essbase Server in properties
Applicationlogfile shows: calculating in parallel with [4] threads (we use command calcparallel 4 in businessrule)
- our nightly calculations take between 60 and 120 minutes- if we avoid fragmentation (run dense restructure every 4 weeks) and keep the system clean and lean...

Hi John,
thanks for the helpful link - the long discussion reminded me again, that pure cores and cache is not all, what makes up a good essbase application -
I will test with calcparallel 6 (in comparison to 4) on our 64bit environment - just to see if I can achieve a 10, 20 or 30% improvement...
In addition, I must admit, that 50% of our 1-2 hour calculation is calculated in serial/ not parallel... so I expect an additional 5 to 10 min improvement, not more.
Thank you for now

EssBase plugin VBA compatibility issues, Parallels and Win7 64bit on a MAC

I installed Parallels and Windows 7 64bit on my MAC and am still getting an VBA compatibility issue after installing Essbase Excel AddIn, when opening Excel. Any Solutions???

I am assuming this is a custom-built dust prevention solution, yes?
Anyways, I received my replacement SuperDrive and just realized that due to Windows and Mac's limitations in regards to hard drives larger than 2.2 TB, I can't have any of my 3TB drives with both OS X and Windows without having at least two separate HFS partitions on them since the Windows partition must be in the fourth partition, requiring OS X to be in partition 2, Recovery in partition 3, and the combined size of these first four partitions must be under 2.2 TB.
At least that's my understanding. I currently have three 3 TB drives and one 1 TB drive (which contains Windows XP and 7 only).
I'm not really not sure if Windows has to be in the fourth partition because as I mentioned, my 1 TB drive has EFI in partition 1, Windows XP in partition 2, and Windows 7 in partition 3. I have OS 10.9 on one 3 TB drive, OS 10.7 on the second 3 TB drive, and no OS on the third 3 TB drive. I would prefer to install Windows 8 on that third 3 TB drive and yet have only one HFS partition because my desktop is already seemingly over-crowded with all the internal drives and partitions it has (I also have a 500GB SSD drive which is my 10.10 boot volume, plugged into one of the two unused SATA motherboard ports).
My plan is to first determine if I can now break the 1 TB drive barrier I ran into before and install two Windows OSs on a 2 TB drive (technically, I am going to clone my 1 TB Windows partitions onto the 2 TB drive). Next, I will attempt to partition a 3 TB drive with Windows 8 in partition 2 and HFS in partition 3.

Any known issues with Flash player 9 and windows 2003 compatibility?

Hi guys..
Is there any known compatibility problem with running flash
applications
on Windows 2003 Server?
My application runs just so well with Windows XP
yet it throws a 2015 bitmap error
when it is being run on the windows 2003 server.
(Not quite often but often enough. the only difference is the
operating
system)
Is there any known issue about this?
Or could there be any compatibility problem with flash player
and
windows 2003?
Any hints would be deeply appreciated...
Thank you...

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

SAP GUI Compatibility issue with Windows 2008R2 64 Bit

Hi Gurus
Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
Your inputs greatly appreciated.
-giri

Hi Giri
Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
Refer the SAP Note 66971 - Supported SAP GUI platforms
BR
SS

Essbase 11.1.1.3 Perormance Issue on windows 2003 64bit

Similar Messages

Maybe you are looking for