Installation issues on Windows 2003, Xeon processor and Oracle 9.2 (64 bit)
Hi all,
I am using a xeon 4 CPU machine with Windows 2003 (64 bit). I just downloaded Oracle 9.2 (64 bit) and found that it needs Itanium processor. Is this an absolute requirement? Can I still run it on xeon? What are the problems?
Mahendra
Re: 64 bit Oracle on Windows: which one to use?
Similar Messages
-
Cf11 installation issue on windows 2003 R2 : installer crashes
Below are the steps I went through :
. download the installer exe (ColdFusion_11_WWEJ_win.exe) : 571 106 928 octets
. launch it --> nothing happen (I can see in tasklanager some cpu activity during few seconds then nothing)
. then I have tried to open the archive with 7zip and I have found two directories : windows and InstallerData
. then I have tried to execute "windows\adobe_cf.exe" and I got immediatly the message : "Impossible to execute LaunchAnywhere - Error Windows 2 when loading Java VM"
My java version is :
java version "1.7.0_55"
Java(TM) SE Runtime Environment (build 1.7.0_55-b14)
Java HotSpot(TM) Client VM (build 24.55-b03, mixed mode, sharing)
Thank you for your support.
Pierre.Hi Pierre,
Please try the following Steps :-
1. Launch Command prompt as Administrator.
2. Navigate to the location of ColdFusion 11 installer.
3.Type the command as shown below in the command prompt and press Enter
4. The installer will launch. Please follow the onscreen steps further.
Hope this helps.
Regards,
Anit Kumar -
Essbase 11.1.1.3 Perormance Issue on windows 2003 64bit
When I run a calculation script on the essbase 11.1.1.3 which installed on windows 2003 64bit, it takes me 100 seconds to finish it. But when I run the same calculation script with the same data, same database OTL and same database configuration on essbase 9.3.1 which installed on window 2003 32 bit, it only takes me 50 seconds to finish it. It means essbase 11.1.1.3 have some Perormance Issue on windows 2003 64bit? or can anybody help me to make the essbase 11.1.1.3 intalled on windows 2003 64bit as fast as the essbase 9.3.1 installed on window 2003 32 bit?
Edited by: user10552229 on 2010-7-10 上午1:12If you set all of the configurations the same as your 32-bit server, you may not be properly optimized. There are a couple of ODTUG Kaleidoscope presentations that talk about 64-bit optimization:
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=11&pg_max_rows=10&pg_rows_fetched=10
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=48&pg_max_rows=10&pg_rows_fetched=10
You have to be at least a (free) Associate Member of ODTUG to download these presentations but, if you are serious about Essbase, you should be a (full) ODTUG member anyway.
Tim Tow
Applied OLAP, Inc -
Essbase 11.1.3 Perormance Issue on windows 2003 64bit
When I run a calculation script on the essbase 11.1.3 which installed on windows 2003 64bit, it takes me 100 seconds to finish it. But when I run the same calculation script with the same data, same database OTL and same database configuration on essbase 9.3.1 which installed on window 2003 32 bit, it only takes me 50 seconds to finish it. It means essbase 11.1.3 have some Perormance Issue on windows 2003 64bit? or can anybody help me to make the essbase 11.1.3 intalled on windows 2003 64bit as fast as the essbase 9.3.1 installed on window 2003 32 bit?
If you set all of the configurations the same as your 32-bit server, you may not be properly optimized. There are a couple of ODTUG Kaleidoscope presentations that talk about 64-bit optimization:
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=11&pg_max_rows=10&pg_rows_fetched=10
http://www.odtug.com/apex/f?p=500:565:2342367037265046:pg_R_751386216307798846:NO&pg_min_row=48&pg_max_rows=10&pg_rows_fetched=10
You have to be at least a (free) Associate Member of ODTUG to download these presentations but, if you are serious about Essbase, you should be a (full) ODTUG member anyway.
Tim Tow
Applied OLAP, Inc -
I have created a cifs share that is being accessed by Mac users that are part of a windows 2003 AD. When the user edit data and save it back to the share, the security permission are reset and none of the other users can see the new data unless the permissions are refreshed on the windows server. I have found following links that talk about a similar issue but with an older MAC OS. I am using 10.6.8.
https://discussions.apple.com/thread/1776934?start=0&tstart=0 (Max OS X doesinfluence ACL's on CIFS on 10.5)
http://www.macwindows.com/snowleopard-filesharing.html#033010b(Max OS X 10.6.3 fixes saving issues on CIFS)
Any help will be appreciated.
Thanks,
ManuThis is a 'known problem' as discussed on the MacWindows site, see http://www.macwindows.com/More-on-OS-X-conflicts-with-Windows-Server-Deduplicati on.html
It appears to still affect Mavericks 10.9.5 at least from the lack of any positive reports to the contrary. It is perhaps a bit late but it would have been worth signing up for the public beta of Yosemite and testing that and if needed reporting it as an issue for Yosemite as this will be getting more bug fix attention than Mavericks now.
I would agree turning off de-duplication is not a desirable solution, however other possibilities to consider are installing the standard Samba software on a Mac and using that instead of Apple's SMBx software. This is done by using the SMBup installer See http://eduo.info/2013/07/13/smbup-faq it does not officially list Mavericks but I did see at least one report that it still worked. A second possibility is to install ExtremeZ-IP which installs an AFP server on to your Windows Server and also gives the bonus of supporting Spotlight searches.
Note: You should only try SMBup on a test setup first. -
Windows 2003 functional level and Windows 2012 additional DC installation
I was trying to add a windows 2012 Domain controller('D') to my windows 2003 functional level domain. My domain FSMO roles are running in
two DC's which is on windows 2003 functional level. (schema master, domain naming master and the PDC
running on
server 'A' and RIP pool manager and the infrastructure master running on server B. DC's A and B is running in site London and the windows 2012 DC I am planning to install is in
US. I have a
vpn tunnel between london and the US office.
In US office one of the branch
office i have a DC 'C' which is already replicating to DC 'A' in
london. The DC 'D' i am planning to install is for my disaster recovery office in the US. (DR for the US office)
While adding the 2012 server as an additional domain controller, I am getting the below error message,
"Error determining whether the target environment requires adprep: Validation error: Unable to check the domain upgrade status for
server (server name). Exception: The specified server cannot perform the requested operation \n
Details:Test.Verify Domain upgrade status.ADPrep.Win32Exception,-2147
467259
Find below the print screen. Please somebody help.Hi,
This error my be caused by no active Schema Master in your domain. Please check the active schema owner.
Hope this helps:
http://serverfault.com/questions/436532/fix-error-determining-whether-the-target-environment-requires-adprep-in-windows
Regards.
Vivian Wang -
LaserJet M1319f MFP Installation issue on Windows 7
Dear HP support team and community members,
I'm currently trying to install HP LaserJet M1319f MFP connected by USB on Lenovo Q190 machine /Intel Core i3 processor/ running freshly installed Windows 7 Enterprise 64 bit with Bulgarian language pack, all current updates, Microsoft Forefront Protection /I also tried to disable the Real-time protection/, UAC disabled, administrator account, IE 11, .NET Framework 4.5.1.
The priter was working correctly with Windows XP.
I downloaded the driver package from here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...
After the installation process reach the "Copying files to the hard drive" stage the installer return error Printer Software Installer stopped working.
I tried running with Administrator privileges and/or Windows XP SP3 compatibility mode, but the same error occurs.
I tried Microsoft Fix It software for install/uninstall drivers too,but with no luck either.
I cleaned the cashe and temporary files around 10-15 times.
Windows update is not helping with the drivers too.
I tried to extract the files from the installer and manually add the printer and got error that the installation was not successful and below it says The file was not found /if I recall it correctly/
After that I tried HP Print and Scan Doctor software, but it displays that there is no driver installed and redirecting me to the driver download page.
I tried the Driver Wizard software too, but it returns that this model is no supported.
I tried to change the windows startup to "Selective startup" with "Load startup items" unchecked and all non-microsoft services disabled, but with no success.
Under Safe mode the install won't complete because of the Print Spooler service not running, which is running normally otherwise.
The "ntprint.inf" file is present in the "Windows\inf" folder, the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x86 has only Drivers and Print Processors subkeys and the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors has only Local Port, Microsoft Shared Fax monitor, Standard TCP/IP Port, USB monitor and WSD port subkeys.
The folders Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 are empty.
I ran sfc /scannow in cmd with administrator privileges, but there was no integrity violations.
I tried to disable the IE component, but no luck either.
So now I’m out of any ideas how to connect that **bleep** thing… I hope that someone can help me with this issue.
Currently the devices without installed driver in the Device Manager are "Hewlett-PackardHP LaserJet M1319f MFP" /Hardware IDs USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and HP Scan /Hardware IDs USB\VID_03F0&PID_5817&REV_0100&MI_00 and USB\VID_03F0&PID_5817&MI_00/
I forgot to mention that I tried all kind of variations with these solutions with and without printer plugged in.
Thank you very much in advance for any kind of guidelines.
Best regards,
Ivan
P.S.: At least I think that I managed to gather all known related solutions in this topic…
This question was solved.
View Solution.Hello Gemini02,
First thank you for your assistance!
I uninstalled the IE 11 and install IE 10, but with no success related to the driver issues. I just want to mention to those who are trying to do the same that IE 11 should be removed from Add/Remove Windows components and from Installed Updates.
As for the solutions from your post:
Solution 2: The build in troubleshooting is reporting that no driver is installed (obviously...), but is not helping much with the installation. Windows updates are not much of a help too... The device manager is finding the device, but can't install the driver. More detailed information about the devices in the Device manager you can find in the end of my first post.
I'm posting some screenshots of the issue so that you can get clearer picture of the situation.
So basically I'm downloading the official drivers from the link in my first post. I'm sure that the drivers are the correct one as I downloaded them several time to clear the possibility of technical mistake.
But when I try to install them I get the following error:
The Event viewer information is as follows:
The reports are:
Critical error (red mark):
Faulting application name: ProductInst.exe, version: 1.0.5.3, time stamp: 0x50cedca3
Faulting module name: ProductInst.exe, version: 1.0.5.3, time stamp: 0x50cedca3
Exception code: 0xc000000d
Fault offset: 0x0000000000047bca
Faulting process id: 0xed8
Faulting application start time: 0x01cfb2fc6900c47e
Faulting application path: C:\Users\5BE8~1\AppData\Local\Temp\7zS7BD7\ProductInst.exe
Faulting module path: C:\Users\5BE8~1\AppData\Local\Temp\7zS7BD7\ProductInst.exe
Report Id: b73cc226-1eef-11e4-94ed-50af73237b10
The information above the critical one:
Fault bucket 3550555182, type 5
Event Name: PnPDriverImportError
Response: Not available
Cab Id: 0
Problem signature:
P1: x64
P2: 00000002
P3: HPM1319.INF
P4: 327f449ab177b16cf6c33f4effdd0e9ea36383fd
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\Users\Петя Станева\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_f2e6b151a2c3dd88a551b5bb893b8a7e8417d4_0e78848b
Analysis symbol:
Rechecking for solution: 0
Report Id: b390829e-1eef-11e4-94ed-50af73237b10
Report Status: 0
The next in line:
Fault bucket 3550555182, type 5
Event Name: PnPDriverImportError
Response: Not available
Cab Id: 0
Problem signature:
P1: x64
P2: 00000002
P3: HPM1319.INF
P4: 327f449ab177b16cf6c33f4effdd0e9ea36383fd
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
These files may be available here:
C:\Users\Петя Станева\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_f2e6b151a2c3dd88a551b5bb893b8a7e8417d4_0cd08ac2
Analysis symbol:
Rechecking for solution: 0
Report Id: b390829f-1eef-11e4-94ed-50af73237b10
Report Status: 0
And the last one:
Fault bucket 3413207808, type 5
Event Name: BEX64
Response: Not available
Cab Id: 0
Problem signature:
P1: ProductInst.exe
P2: 1.0.5.3
P3: 50cedca3
P4: ProductInst.exe
P5: 1.0.5.3
P6: 50cedca3
P7: 0000000000047bca
P8: c000000d
P9: 0000000000000000
P10:
Attached files:
C:\Users\Петя Станева\AppData\Local\Temp\WER8314.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Петя Станева\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_ProductInst.exe_d56e40a56282daea123243fa1f100faa5e2bf_06a92cda
Analysis symbol:
Rechecking for solution: 0
Report Id: b73cc226-1eef-11e4-94ed-50af73237b10
Report Status: 0
Solution 3 can't be applied to the current case as I can't install the software so I don't have what to uninstall/reinstall.
I cleared the cache and disabled all optionally installed software in msconfig as suggested, but the issue with the installer is still not resolved.
Solution 4 is not relevant as the device was working fine two days ago.
Solution 5 is difficult for implementation too as the location of the device is in some kind of rural area and it is vital for the implementation of the daily duties of the employee.
So after the failure with the solutions provided in the article I tried to extract the installer to use the drivers and manually install the printer using the file HP1319fp.ini with the "... MFP" driver selected. I set it at new local port named USB. I'm posting the screenshot of the error i get in the end of installation:
After I press the OK button in gets in a loop by returning to the previous page.
I tried the same drivers with existing port USB001, but got the same result as with the new port.
Currently I will try to rename the SoftwareDistribution folder in case that this is kind of windows update cache issue, but don't think so... I begin to think that this device driver is somehow not compatible with the computer hardware...
Thank you and I apologize for taking your time with such issues!
Best regards,
Ivan -
Installation problem on Windows 2003
Hi All,
I have installed the saprfc extension on my laptop for testing purposes.
Definitions of my laptop: Windows XP, IIS 6, PHP 4.4.2, SAP GUI 640
Everything works fine and I can access the SAP through the web server on my laptop without any problem.
Now, after finishing my tests I installed my web application on a real production server with the following definitions: Windows 2003 server, IIS 6, PHP 4.4.2
As you can see the two differences are the operating system and the fact that I do not have a complete SAP GUI installation on the server I only located the librfc32.dll under the windows library.
My problem is that I get the message that the php_saprfc.dll extension cannot be loaded (I edited the php.ini).
Doe anyone have any idea why?
Thanks,
RoyHi,
I have an installation with my laptop WIN2003 server with apache web server instead of IIS, without problems.
Are you sure that in your php.ini is all OK?
Have you tried to copy the WIN2003 php.ini on your laptop and try to load saprfc.dll?
Lorenzo -
N1 SPS 6.0 Installation problem on windows 2003
Hello,
I have tried to install N1 SPS 6.0 on windows 2003. I was able to finish installlation successfully. But When I try to access tool from http://localhost:8080 , It is not working. I am new to tool , I am installing first time so not able to figure out. I have checked the service for master server is starting under windows services. What else do I need to check? Are there any prerequisite to install N1 SPS 6.0 Master Server on windows?
Thanks. Any help will be appreciated.
Thanks
Bhavika1. While installation did you configured http or https for UI ? I configured http
2. If https, did you provided the keystore file as part of installation or not? No
3. If https and opted to provide the keystore file after the installation? No
4. if you run 'netstat -an | more' can you find port 8080 in the list? I cannot see
5. are you finding any error messages in {install-dir}\server\bin\cr_server.out file? if so, can you share that error message
I cannot see cr_server.out file under C:\Program Files\N1 Service Provisioning System\6.0\server\bin that is my install directory
6. Related to N1 SPS, are you finding any errors in windows event log? if so, can you share the error message
7. From DOS command prompt, when you run "net start crserver60" or "net start postmaster60" or "net start crprepdb60" are you getting the following error? *
The requested service has already been started.
I see following message
C:\Documents and Settings\Administrator>net start crserver60
The N1 Service Provisioning System 6.0 Server service is starting.
The N1 Service Provisioning System 6.0 Server service was started successfully.
8. Do you have the local user postgres in your system What do u mean by local user ? I have installed postgres on my system with postgres user.
9. instead of using "http://localhost:8080", if you try to access the UI admin through "http://{windows-host-name}:8080", does it work? * I tried both way , it does not work * -
Xp_logininfo "Installation problem on windows 2003 with Sql 2005"
Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
SohailHi All,
This would solve your problem
First of all this error is <b>MSSQL error</b>.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason -
Adobe CS4 Design Center Premium Installation issues on Windows 7 Ultimate x64 (RTM)
I am in the process of moving my systems to Windows 7; as part of that I have attempted to install the Adobe CS 4 Design Center Premium version that I purchased on August 16th. Thus far my experience with this has been disappointing.
My previous system (Windows Vista x64 Ultimate) was running Adobe CS 4 Production Premium version without problems. Upgrading this to Windows 7 worked just fine (so, Win 7 upgrade over Production Premium worked.) However, for unrelated reasons I decided to reinstall a fresh version of Windows 7. and the Adobe CS 4 Design Center Premium version in question.
What I observe is a highly repeatable failure during installation, in which as soon as I get to the phase where it displays "Currently installing LangPack(English) for Device Central" and then dies. Applications are half installed at that point (I can actually use most of the tools, which is why I keep setting this aside to look at it later.) This was a clean system and Adobe CS 4 Design Center Premium was the first thing I tried to install on the box.
Since that failure, I have tried to install it on a completely different system (my laptop) running Windows 7 Ultimate x64 and experienced the same error. The desktop system is a Dell, the laptop is an HP.
The event log indicates a generic "event ID 1000" error. The detailed information shows that something returns STATUS_INVALID_PARAMETER (0xC000000D) as an exception, which is not handled and the program then dies.
Log Name: Application
Source: Application Error
Date: 9/11/2009 6:56:19 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: wam-mps1730
Description:
Faulting application name: Setup.exe_Adobe Setup, version: 2.0.138.0, time stamp: 0x48bf0040
Faulting module name: Setup.exe, version: 2.0.138.0, time stamp: 0x48bf0040
Exception code: 0xc000000d
Fault offset: 0x000ab71f
Faulting process id: 0xb20
Faulting application start time: 0x01ca32e6eed97c22
Faulting application path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Faulting module path: C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe
Report Id: e0e73da0-9eda-11de-8e4a-001e4ce53d44
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-09-11T13:56:19.000000000Z" />
<EventRecordID>2221</EventRecordID>
<Channel>Application</Channel>
<Computer>wam-mps1730</Computer>
<Security />
</System>
<EventData>
<Data>Setup.exe_Adobe Setup</Data>
<Data>2.0.138.0</Data>
<Data>48bf0040</Data>
<Data>Setup.exe</Data>
<Data>2.0.138.0</Data>
<Data>48bf0040</Data>
<Data>c000000d</Data>
<Data>000ab71f</Data>
<Data>b20</Data>
<Data>01ca32e6eed97c22</Data>
<Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
<Data>C:\Program Files (x86)\Common Files\Adobe\Installers\55230b0b70661df0f212e88f0b655f7\Setup.exe</Data>
<Data>e0e73da0-9eda-11de-8e4a-001e4ce53d44</Data>
</EventData>
</Event>
In attempting to find a work-around (since I would like to be able to actually use everything here) I have tried to run the installer in compatibility mode - both XPSP2 and Vista SP2 mode. Both fail in the same fashion.
At this point I've now installed a post-mortem debugger (WinDBG) and will attempt to capture more information about the specific failure. I am hoping that someone has seen this issue previously and has found a successful work-around. I see that others have installed the Master Suite version successfully and I suppose that is one potential solution to the problem that I may explore if i cannot get this package to work properly.Additional information that I have collected (the wonders of a post-mortem debugger):
0:016> kv
Child-SP RetAddr : Args to Child : Call Site
00000000`024ce7e8 00000000`74b0a2df : 00000000`0c12faec 00000000`0c12fb04 00000000`04fda3e0 00000000`74b0a74c : ntdll!NtWaitForWorkViaWorkerFactory+0xa
00000000`024ce7f0 00000000`74aecf87 : 00000000`00000000 00000000`00001000 00000000`0c12fd30 00000000`7efa7000 : wow64!whNtWaitForWorkViaWorkerFactory+0x23
00000000`024ce840 00000000`74ad276d : 00000000`755d0f09 00000000`00000023 00000000`00000001 00000000`0c12fae4 : wow64!Wow64SystemServiceEx+0xd7
00000000`024cf100 00000000`74aed07e : 00000000`00000000 00000000`74ad1920 00000000`00000000 00000000`00000000 : wow64cpu!TurboDispatchJumpAddressEnd+0x24
00000000`024cf1c0 00000000`74aec549 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : wow64!RunCpuSimulation+0xa
00000000`024cf210 00000000`76f4d177 : 00000000`00000000 00000000`7efdf000 00000000`7efa7000 00000000`00000000 : wow64!Wow64LdrpInitialize+0x429
00000000`024cf760 00000000`76f0308e : 00000000`024cf820 00000000`00000000 00000000`7efdf000 00000000`00000000 : ntdll! ?? ::FNODOBFM::`string'+0x2bfe4
00000000`024cf7d0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!LdrInitializeThunk+0xe
0:016> !analyze -v
Last event: 770.978: Exit process 0:770, code c000000d
debugger time: Fri Sep 11 07:33:12.750 2009 (GMT-7)
0:016> r
rax=00000000000000c0 rbx=000000000c12fedc rcx=0000000000000000
rdx=0000000000000000 rsi=000000007efa7000 rdi=000000007efa9000
rip=0000000076f217ba rsp=00000000024ce7e8 rbp=000000000c12ff88
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=0000000000000000 r12=0000000074b0a2bc r13=00000000024cfd20
r14=00000000024cf170 r15=0000000074ad2450
iopl=0 nv up ei pl nz na pe nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000200
ntdll!NtWaitForWorkViaWorkerFactory+0xa:
00000000`76f217ba c3 ret
Thus, this appears to be related to WoW64 behavior in some fashion. I am unfamiliar with NtWaitForWorkViaWorkerFactory, so I'm not sure why it would be returning STATUS_INVALID_PARAMETER.
So, I've collected a mini-dump for the process, but it's 300MB. In the unlikely event someone is interested in analyzing it, let me know and I'll gladly provide it.
I'm now wondering if I should re-wipe this drive, install Vista, Adobe CS 4 Design Center Premium and then upgrade to Windows 7. But that is a lot of effort to work around an app compat issue. -
Oracle 11g R2 Client Silent Installation Issue (PATH) Windows 7 x86
Hi All,
I'm hoping somebody can shed some light on this issue.
I created a Response file using the 'Save Response File' method during an interactive installation on a Windows 7 Enterprise x86 client. (file enclosed)
I have installed it multiple times now with multiple permutations of the command line (got caught out by the old lower case F in responseFile) but now I'm getting the same error each time (a critical error with the PATH according to the installation log). There is nothing wrong with the path length as the installation works fine in GUI mode and passes the Prereq check.
I launch the command line to install (with Run As Administrator) - "[location of setup.exe]\setup.exe" -nowait -silent -responseFile "[location of response file]\Oracle11gv2.rsp"
RESPONSE FILE:
## Copyright(c) Oracle Corporation 1998,2008. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values. ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=
# Inventory location.
INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory
# Specify the languages in which the components will be installed.
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
# Example : SELECTED_LANGUAGES=en,fr,ja
SELECTED_LANGUAGES=en,en_GB
# Complete path of the Oracle Home
ORACLE_HOME=C:\Oracle\product\11.2.0\client_1
# Complete path of the Oracle Base.
ORACLE_BASE=C:\Oracle
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
# The following choices are available. The value should contain
# only one of these choices.
# InstantClient : InstantClient
# Administrator : Administrator
# Runtime : Runtime
# Custom : Custom
#Example : INSTALL_TYPE = "Administrator"
oracle.install.client.installType=Custom
# Name : oracle.install.client.customComponents
# Datatype : StringList
# This property is considered only if INSTALL_TYPE is set to "Custom"
# Description: List of Client Components you would like to install
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
# oracle.sqlj:11.2.0.1.0 -- "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.1.0 -- "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.1.0 -- "Oracle Java Client"
# oracle.sqlplus:11.2.0.1.0 -- "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.1.0 -- "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.1.0 -- "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.1.0 -- "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.1.0 -- "Oracle Programmer"
# oracle.xdk:11.2.0.1.0 -- "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.1.0 -- "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.1.0 -- "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.1.0 -- "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.1.0 -- "Oracle Net"
# oracle.ordim.client:11.2.0.1.0 -- "Oracle Multimedia Client Option"
# oracle.ons:11.2.0.0.0 -- "Oracle Notification Service"
# oracle.odbc:11.2.0.1.0 -- "Oracle ODBC Driver"
# oracle.has.client:11.2.0.1.0 -- "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.1.0 -- "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.1.0 -- "Oracle Scheduler Agent"
# Example : oracle.install.client.customComponents="oracle.precomp:11.2.0.1.0","oracle.ons:11.2.0.0.0","oracle.oraolap.mgmt:11.2.0.1.0","oracle.rdbms.scheduler:11.2.0.1.0"
oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.1.0,oracle.sqlplus:11.2.0.1.0,oracle.dbjava.jdbc:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network.client:11.2.0.1.0,oracle.odbc:11.2.0.1.0,oracle.oo4o:11.2.0.1.0,oracle.ntoledb:11.2.0.1.0,oracle.ntoledb.odp_net_2:11.2.0.1.0,oracle.aspnet_2:11.2.0.1.0
#Name : MTS_PORT
#Datatype : int
#Description: Port number to be used for by the Oracle MTS Recovery Service to listen
# for requests. This needs to be entered in case oracle.ntoramts is
# selected in the list of custom components in custom install
#Example : MTS_PORT = 2030
oracle.install.client.oramtsPortNumber=49152
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
oracle.install.client.schedulerAgentHostName=
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
oracle.install.client.schedulerAgentPortNumber=
LOG FILE TO FOLLOWLOG FILE:
Using paramFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\oraparam.ini
The commandline for unzip:
Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.5.0.17.03\1\DataFiles/"*.jar" -d "C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM" INFO: Loading data from: jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Validating Response File Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\response\Oracle11gv2.rsp
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Setting Response file data to the Installer
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Changing the format to extended property file format to merge the flowDataDefaults with the flowDataSource
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/response/Oracle11gv2.rsp
INFO: Translating external format into raw format
INFO: Loaded BeanStore using the flow data source
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\cl
ient\install\../stage/products.xml
INSTALL_TYPE Custom
INVENTORY_LOCATION C:\Program Files\Oracle\Inventory
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE C:\Oracle
ORACLE_HOME C:\Oracle\product\11.2.0\client_1
ORACLE_HOSTNAME GBA-P74444432
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_CustomComponents {"oracle.rdbms.util:11.2.0.1.0","oracle.sqlplus:11.2.0.1.
0","oracle.dbjava.jdbc:11.2.0.1.0","oracle.rdbms.oci:11.2
.0.1.0","oracle.network.client:11.2.0.1.0","oracle.odbc:1
1.2.0.1.0","oracle.oo4o:11.2.0.1.0","oracle.ntoledb:11.2.
0.1.0","oracle.ntoledb.odp_net_2:11.2.0.1.0","oracle.aspn
et_2:11.2.0.1.0"}
oracle_install_client_OraMTSPortNumber 49152
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in SILENT mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: PATH has :==>C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\AdminStudio\11.5\Common\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO_CUSTOM_YES
INFO: Verifying route INVENTORY_NO_CUSTOM_YES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientCustomInstall
INFO: Re-loading component config bean
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
INFO: Resolving dependencies
INFO: Completed executing action at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientCustomInstall>
INFO: Completed validating state <clientCustomInstall>
INFO: Verifying route TO_ENDCUSTOM
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:1023.5547MB (1048120.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:130MB
INFO: Actual Value:21.3053GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:32-bit
INFO: Actual Value:32-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
WARNING: Result values are not available for this verification task
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log
ACTION: Identify the list of failed prerequisite checks from the log: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed validating state <checkPrereqs>
INFO: Terminating all background operations
INFO: Terminated all background operations
WARNING: A log of this session is currently saved as: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Oracle recommends that if you want to keep this log, you should move it from the temporary location to a more permanent location.
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup Driver -
Forms 10g Installation issue on windows 7 Professional service pack 1
hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig... -
Oracle 10g Installation issue on Windows 7
Hi,
I tried to install Oracle 10g downloaded from the below link on my laptop which runs in Windows 7.
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
The Oracle version is 10g release 2 for windows 7. I got this DB version no. for Windows 7 from this forum only. But still, I got the error message stated below and unable to install 10g.
------------------------------------------------------ Error --------------------------------------------------------------------------
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2010-10-22_07-37-48AM.log
Please press Enter to exit...
------------------------------------------------------ Error End -------------------------------------------------------------------
Could you please let me know how I can fix this issue? Or is there any other oracle 10g release/patch to fix this issue? I need to install only Oracle 10g and not 11g.
Also, I need to install Oracle Forms 10g too.
It would be great if you could guide me on installing these two softwares in my laptop.
Your help will be very much appreciated.
Thanks,
Arun
Edited by: 804404 on Oct 22, 2010 7:52 AMWelcome to the forums !
This issue has been discussed many times before. Pl use the search feature. The only versions supported in Win 7 (Professional or higher) are 10.2.0.5 and 11gR2. 10.2.0.5 is only available on My Oracle Support, while 11gR2 can be downloaded for free from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Re: Oracle for Windows 7
Re: which version of oracle works on windows 7
HTH
Srini -
Oracle EBS R12 installation problem in Windows 2003
Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AMI have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein
Maybe you are looking for
-
Hi, trying to update data from a view with: - Company (table) - Products (table) In a form, the user wants to update e.g: both products.product_name and Company.company_name. Is there a way to update a view records built on 2 tables ? Any idea will b
-
BI-IP Authorizations: Accessing own Cost Center only
Hi, We are currently implementing BI-IP in our company. We have created the ready-input templates and we are prepared for roll-out. There is still one concern though which I haven't resolved. I am currently looking for an AUTHORIZATION that will let
-
I have lost my osx disk! Now what?
I have lost my osx 10.6 disks and i need to reinstall Snow Leopard! What can i do? thanks
-
How to sample color in a PDF for redaction
I have a PDF that I want to remove page numbers from. I assume I use the redaction tool to get rid of them. I can get rid of the page numbers using the redaction tool but some of the page backgrounds are non white so I have to try to guess the color
-
5320 XpressMusic "Gallery: Feature not supported"
Bought the 5320 XpressMusic phone about three months ago. Had this problem for about a month. When I try to open for example Images or Video clips in the Gallery, it says: "Gallery: Feature not supported". I can still play music, and access my pictur