Esscmd failing to init

Hi all:
I have an user who gets this message when trying to load Esscmd from command lines:
"Error: unable to init client"
All others users have essmcd with same version working OK. The version is 5.0.2. He had version 6.5.4.7 which was uninstalled because it didnt work either, under the error "Failed in GCInit(). return code [10]".
This same user has on the same machine Application Manager working ok.
Which requirements does esscmd to be able to load? Any specific port opened? any registered dll wichs registration might failed?
Thanks in advance!
Jorge

User logged in as different user, and esscmd worked ok. So it was either a persmissions issue or essbase not properly installed for all users.

Similar Messages

AIR-AP1131AG-A-K9 Reload Reason: FAILED CRYPTO INIT.

Hi All,
I have a standalone AP of model AIR-AP1131AG-A-K9 and have changed the mode to LAP by using mannual archive command. However after changing the mode to LAP it gives below log and keep on booting.
Reload requested by LWAPP CLIENT. Reload Reason: FAILED CRYPTO INIT.
> I did found from below link that the reason is as mentioned in point number 9, however solution didnt worked.
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml
> I did downloaded CiscoAironet-AP-to-LWAPP-Upgrade-Tool-v34.exe to upgrade but after executing this file nothing happens.
Kindly help me in understanding whats going wrong with my AP?
Here is the logs.
*Mar 1 00:00:06.644: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:07.644: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
ap>
*Mar 1 00:00:18.603: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:24.691: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:24.711: LWAPP_CLIENT_ERROR_DEBUG: lwapp_crypto_init_ssc_keys_and_certs no certs in the SSC Private File
*Mar 1 00:00:24.711: LWAPP_CLIENT_ERROR_DEBUG:
*Mar 1 00:00:24.711: lwapp_crypto_init: PKI_StartSession failed
*Mar 1 00:00:24.729: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: FAILED CRYPTO INIT.
*Mar 1 00:00:24.729: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.

One of the errors is saying that it can't find any SSC in the private file.
This yells me the AP doesn't have a certificate. Why you'll want ti do is reload an IOS image on the AP and then use the conversion tool to load the capwap image. By using the conversion tool, it wil execute some commands that create a SSC, a self signed certificate. Then you load the SSC on the WLC and the AP should be able to boot up and join.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
Sent from Cisco Technical Support iPhone App

1130AG not joining controller - FAILED CRYPTO INIT

I am trying to join my 1130AG-E-K9 AP to my 2016 WLC, but it is stuck in a boot loop and will not connect to the controller. The error I'm getting is:
*Mar 1 00:00:29.584: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:00:29.585: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:29.598: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no certs in the SSC Private File
*Mar 1 00:00:29.598: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init: could not start PKI session
*Mar 1 00:00:29.598: %LWAPP-3-CLIENTERRORLOG: Failed to initialize Crypto. Rebooting
*Mar 1 00:00:29.663: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON failed, because size left in ROMMON (4294967295), size needed (29), error code (-1)
*Mar 1 00:00:29.663: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reload Reason: FAILED CRYPTO INIT.
*Mar 1 00:00:29.664: %LWAPP-5-CHANGED: CAPWAP changed state to DOWNXmodem file system is available.
I found some details here: http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml, but I'm not sure what it means that I have a 'SSC AP'. I am not local to this AP, though I do have a console connection to it-what do I need to do to get it working again? It just continually goes through this error and reboots every 30 seconds or so, so it's useless at the moment.
Thanks!

While that did help me potentially debug the AP, it seems the AP can not/is not reaching the WLC. Debugs on the WLC show other APs talking to it, but the only signature I'm picking up on the WLC from this AP is:
*Aug 08 20:34:36.376: 00:13:5f:fb:b4:f0 Echo Request from 10.50.0.25:44194
*Aug 08 20:34:36.376: 00:13:5f:fb:b4:f0 Echo Response sent to 10.50.0.25:44194
And from the AP itself:
Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:06.475: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event (contains, 1024 messages)
*Mar 1 00:00:08.523: %LINK-3-UPDOWN: Interface FastEthernet0, changed state up
*Mar 1 00:00:08.548: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.4(21a)JA2, RASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:17 by prod_rel_team
*Mar 1 00:00:09.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthet0, changed state to down
*Mar 1 00:00:17.310: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthet0, changed state to up
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:20.591: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTRER
Writing out the event log to nvram...
*Mar 1 00:00:29.591: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTLER
*Mar 1 00:00:29.592: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:29.605: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no ce in the SSC Private File
*Mar 1 00:00:29.605: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init: could not st PKI session
*Mar 1 00:00:29.605: %LWAPP-3-CLIENTERRORLOG: Failed to initialize Crypto. Roting
*Mar 1 00:00:29.666: %SYS-4-PUPDATECLOCK: Periodic Clock update with ROMMON led, because size left in ROMMON (4294967295), size needed (29), error code (
*Mar 1 00:00:29.667: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reloaeason: FAILED CRYPTO INIT.
*Mar 1 00:00:29.667: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
Is my only option at this point reverting back to a standalone image, then going back to a LW one?
Thanks again,
-Ryan

IBot fails on init block

Hi, I have configured authentification against LDAP. User Administrator is defined at BI Server. When I create and run (as Administrator) an iBot it fails at init block - LDAP authentification. Can somebody help me what is wrong? I might have entered wrong password somewhere in configuration of Scheduler I try to reenter it everywhere where I found it.
Error Message:
+++ ThreadID: 506 : 2008-09-17 08:21:01.220 [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLDriverConnectW). Error Codes: OPR4ONWY:U9IM8TAC State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. *[nQSError: 13024] Successful completion of init block 'sib_Authentication LDAP' is required.* (08004) Error Codes: . Error Codes: AGEGTYVF
+++ ThreadID: 506 : 2008-09-17 08:21:01.254 iBotID: /users/administrator/_ibots/Test1 ...Trying iBot RunCR loop again.
+++ ThreadID: 506 : 2008-09-17 08:21:01.272 ... Sleeping for 8 seconds.
+++ ThreadID: 506 : 2008-09-17 08:21:09.799 [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLDriverConnectW). Error Codes: OPR4ONWY:U9IM8TAC State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 13024] Successful completion of init block 'sib_Authentication LDAP' is required. (08004) Error Codes: . Error Codes: AGEGTYVF
+++ ThreadID: 506 : 2008-09-17 08:21:09.830 iBotID: /users/administrator/_ibots/Test1 ...Trying iBot RunCR loop again.
+++ ThreadID: 506 : 2008-09-17 08:21:09.845 ... Sleeping for 6 seconds.
+++ ThreadID: 506 : 2008-09-17 08:21:16.399 [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLDriverConnectW). Error Codes: OPR4ONWY:U9IM8TAC State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 13024] Successful completion of init block 'sib_Authentication LDAP' is required. (08004) Error Codes: . Error Codes: AGEGTYVF
+++ ThreadID: 506 : 2008-09-17 08:21:16.419 iBotID: /users/administrator/_ibots/Test1 Exceeded number of request retries.
+++ ThreadID: 1376 : 2008-09-17 08:21:16.437 iBotID: /users/administrator/_ibots/Test1 No Content for user : Administrator

I don't think it is going to work unless you create the user in LDAP server. I am afraid this is the way your system is setup. If you want LDAP authentication then all your users need to exist there. Delivers runs iBots "on behalf" of users therefore the BI Server will try to authenticate them uding your defined LDAP authentication methods. I will suggest you don't use your OBIEE Administrator user to schedule iBots. Instead create a new user, which should exist in your LDAP server, and make this user part of the BI Server Administrator group. You should have the same priviledges as the Administrator.

*ERROR* Failed m_WaveList- Init(). hr=0x80040154 with Cisco TSP

Cisco TSP 8.6(2.2).
I am trying to install Cisco TSP on a Windows 7 32bit workstation, but I am having issues. We are using a management program called "Connectwise". My boss wants to be able to dial a customer within the "Connectwise" program to log calls. Our other office has a Shortel phone system and Shortel's TSP program works fine. I've installed Cisco TSP, configured CTI ports, configured a CTI routepoint, enabled the user for CTI, and associated the user with the CTI ports/route point. When I try to dial a number within Connectwise, nothing happens. Within the Cisco TSP logs these errors are logged:
16:23:36.418 HDR|05/07/2012 CiscoTSP001.tsp,Error
16:23:36.418 |   CSelsiusTSPWaveList::Init() *ERROR* Failed to get ISelsiusNTWaveCtl interface.
16:23:36.419 |   SelsiusTSP::InitializeComObjects() *ERROR* Failed m_WaveList->Init(). hr=0x80040154
17:02:12.513 |   CSelsiusTSPLink::getMessage() *ERROR* Receive() failed with error 0.
I have tried to use the Windows "Dialer" program to test as well, but receive this error:
One or more telephone device drivers are incompatible with TAPI.DLL. Install an updated version.
I have installed Cisco TSP with both the WAVE driver and the new MEDIA driver. I receive the same error with either driver. I've also tried this on multiple workstations, but get the same error.
Help

I engaged TAC and the engineer pinpointed following error from the CTI Logs:
Login User Id:platju Reason code.:-1932787595
This is the Cisco documentation on this error code:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/constantfieldvalues.html
The engineer suspected LDAP server is not able to authenticate CTI based connections correctly although HTTP based connections (CCMUSER Web Page access) or JTAPI based connections (UCCX) are working fine.
We created an application user in CUCM and the Dialer.exe showed Cisco Line as expected. The engineer did assign all CTI roles (Not only Standard CTI Enabled) except Secure CTI ones. The End User didn't work no matter what we try.
As of now, I've asked the AD team to look at their side or engage Microsoft to debug it at their end. Hopefull that'll resolve the issue.

1200AP Reload Reason: FAILED CRYPTO INIT.

The AP restarts every 30 seconds...just like the documentation says it will!! This AP will not have full capability in LWAPP mode so I need to be able to get it to Autonomous mode but cannot get it from rebooting..... What is the process to get into a limited access mode to reload the proper security into flash and have it come up in autonomous mode??? Please let me know if you need more info...

if you want to return an ap to atonomous mode you will need to use the mode button:
http://www.cisco.com/en/US/docs/wireless/access_point/12.2_15_JA/configuration/guide/s15trb.html#wp1040300

IPlanet WebServer fails to init Oracle Connection

Hi,
I've deployed a Servlet in iWS 6.0, that uses a connection to an Oracle Server 9i (classes12.jar).
When I try to access the database I receive an error like:
[08/Jul/2002:21:05:18] failure (12007): Internal error: Unexpected error condition thrown (unknown exception,no description), stack: java.lang.StackOverflowError
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.lang.ClassLoader.defineClass(ClassLoader.java:423)
at com.iplanet.server.http.servlet.NSServletLoader.loadResource(NSServletLoader.java:387)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:429)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:174)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:106)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.lang.ClassLoader.defineClass(ClassLoader.java:423)
at com.iplanet.server.http.servlet.NSServletLoader.loadResource(NSServletLoader.java:387)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:429)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:174)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:106)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.lang.ClassLoader.defineClass(ClassLoader.java:423)
at com.iplanet.server.http.servlet.NSServletLoader.loadResource(NSServletLoader.java:387)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:429)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:174)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:106)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at oracle.jdbc.driver.OracleConnection.privateCreateStatement(OracleConnection.java:763)
at oracle.jdbc.driver.OracleConnection.createStatement(OracleConnection.java:670)
I thought that the problem could be classpath configuration (classes12.jar is in the WEB-INF of my Web Application), so I put classes12.jar in the classpath of the application, the error changes and now I can see:
[08/Jul/2002:21:31:40] failure (12159): Internal error: Unexpected error conditi
on thrown (unknown exception,no description), stack: java.lang.StackOverflowErro
r
at java.net.URLClassLoader$1.run(URLClassLoader.java:187)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at java.lang.ClassLoader.loadClass(ClassLoader.java:287)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:310)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:115)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:442)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:332)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:141)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:150)
at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java)
Thanks a lot,
David.

put classes12.jar path in jvm12.conf file of web server. You can configure this through GUI also. try renaming classes12.jar to classes12.zip also
Ananda Rao

[SOLVED] Failed pacman -Syu system update

I tried update pacman -Syu and gave me this message:
error: failed to init transaction (unable to lock database)
if you're sure a package manager is not already
running, you can remove /var/lib/pacman/db.lck
so I changed db.lck to db.lck.bac
and when I pacman -syu pacman gave me this mesage:
error: failed to commit transaction (conflicting files)
initscripts: /etc/profile.d/locale.sh exists in filesystem
Errors occurred, no packages were upgraded.
any Ideals?
Last edited by mephostophilis (2011-10-23 05:48:20)

https://bbs.archlinux.org/viewtopic.php … 1#p1007171

DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel

DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel source on DB2.
Below is the the log details:
2021 2012-11-08 03:23:46 2012-11-08 03:25:56 -0700 0000002a 001 003f 0001 09 ddlimp 604 736 C:\OBIA\Upgrade\CTLFiles\DDL_.log
ContextInit     ContextInit     0     0     2012-11-08 03:23:46     Message Facility failed to init. Siebel Root: C:\DAC\client\utilities
Trace     Trace     3     0     2012-11-08 03:23:46     Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Trace     Trace     3     0     2012-11-08 03:23:46     Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
Trace     Trace     3     0     2012-11-08 03:23:46
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:46     ddlimp /U SIEBEL /P ***** /C siebel /G SSE_ROLE /F C:\OBIA\Upgrade\CTLFiles\DDL_OLTP.CTL /L C:\OBIA\Upgrade\CTLFiles\DDL_
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:46
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:46     Connecting to the database...
DBCLog     DBCLogError     1     0     2012-11-08 03:23:52     SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
DBCLog     DBCLogError     1     0     2012-11-08 03:23:52     SQL Warning, SQL State , 40042692, CLog     DBCLogError     1     0     2012-11-08 03:23:52     SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Connected.
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Reading tables and indexes from DDL file...
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Read 522 tables and 1084 indexes from DDL file...
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:23:52     Reading existing schema...
SARMLog     SARMInformation     3     0     2012-11-08 03:23:52     SARM is OFF -change param SARMLevel to enable
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Read 0 tablespaces, 6137 tables and 24846 indexes from existing schema...
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Running SQL statements against the database...
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Merging table S_ETL_COSTLST ...
SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     37000: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError     Statement     0     0     2012-11-08 03:25:56     SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog     DBCLogError     1     0     2012-11-08 03:25:56     [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     56098: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     alter table S_ETL_COSTLST modify
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     CONFLICT_ID default '0'
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     ;
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     writeExecDDL error (UTLOdbcExecDirectDDL pDDLSql).
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     writeExecDDL error (UTLDbDdlColModify).
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Error in MainFunction (UTLDbDdlDbMerge).
SQLDBUtilityLog     SQLDBUtilityLog     3     0     2012-11-08 03:25:56     Error in Main function...
GenericLog     GenericError     1     0     2012-11-08 03:25:56     (logapi.cpp (167) err=1 sys=126) SBL-GEN-00001: (logapi.cpp: 167) error code = 1, system error = 126, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)

If you run DAC on a 64-bit windows Operating System, you must create the ODBC data source using the ODBC Administrator tool in %windir%\SysWOW64\odbcad32.exe. for creating the data warehouse tables.
If helps pls mark

Server failed to run - Reason:Server is not in the majority cluster partition

Hi,
my environment is Weblogic 12.1.2.
The deployment configuration is: cluster, 2 machines, 2 managed servers, 1 data source, and JMS (with uniform distributed queue).
When I'm starting the admin server + managed server on the first machine (using the node manager), while on the second machine the managed server and also the node manager are not running, the server failed to run and the error reason is : "Server is not in the majority cluster partition".
How can I enforce the server to run even if the second one is not running ? This scenario could occured because of some local problems on the second machine. My expectation is that after the second will running the whole cluster status will be good.
Thanks,
Yaakov

Hi,
Just to remember the configuration: 2 managed servers configured as cluster that should be deployed on 2 different machine.
Following summary of the tests:
     - node manager + admin server + 1 managed server running on the first machine --> server failed to init with error "Server is not in the majority cluster partition"
     - node manager + admin server + 2 managed servers running on the one machine --> servers are running without errors
     - node manager + admin server + 1 managed server running on the first machine / node manager runs on the second machine --> server on the first machine runs without errors without the famous error ' Server is not in the majority cluster partition'.
Bottom line, seems that if the node manager is not running on the remote machine, the cluster is not in a stable state and so the single managed server failed to initialize.
Is it according the documentation / expectations ?
Thanks,
Yaakov

OBEE Integration with EPM workspace failed

Hi,
I am trying to integrate EPM with work space and failing. Initally i tested without copying the file and got reg.proerties file not found in ......\9.5.0.0. Then, I cipied reg.properties file in the appropriate folder ....\9.5.0.0 and tried to register and I am getting the following error.
The EPM Workspace Connection program resulted in a non-zero return code (4294967295). The EPM Workspace Connection program resulted in a non-zero return code (4294967295).
Details:
0 [main] ERROR com.hyperion.hit.registry.RegistryUtils - An error occured when trying create a connection to registry. Detailed message is oracle.jdbc.OracleDriver
com.hyperion.hit.registry.exceptions.RegistryException: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:197)
at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:143)
at com.hyperion.hit.registry.Registry.getInstance(Registry.java:155)
at com.siebel.analytics.web.hyperionregistry.HyperionRegistry.main(HyperionRegistry.java:145)
Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:192)
... 3 more
Thank you
Venky

Hi All
I configured the OBIEE with EPM Workspace Connection settings where both Hyperion Workspace and OBIEE are installed in single windows server and it registered with Workspace successfully. I know the 'Source File Path' as "C:\Hyperion\common\config\9.5.0.0\reg.properties", if both Hyperion workspace and OBIEE installed on the same box
However I have Hyperion and OBIEE installed on 2 different boxes, so what is the 'Source File Path' value (how to call Hyperion Server path reg.properties) to be entered in OBIEE->Administration->Manage EPM Workspace Connection screen where OBIEE installed and running.
appreciate if anyone provide pointer to the value to entered in the 'Source File Path' field.
Thanks
Seth

Installation of CM fails(par files deployed but connection to database fail

Hi,
I have just installed CM EP6 SP2 on an old sandbox system (which has been upgrade from SP0 I believe), and I have some problems. The installation went fine untill I got the error message "CJS-00276 The upgrade failed. The installation report file cf_installation.report does not exist. Check the log files under the server directory and, if necessary, contact your local support center." But I, at least now, find the file but this is probably from my installation of CM SP2 Patch4 and CM SP2 Patch4 hf8 (I was hoping the installation of them would clear the problem).
I believe the problem is that there are missing some files under the SAPPRT share (
server\SAPPRT\EPS1\global\config\cm), this because it was giving some error messages earlier about it. I was running the portal under localsystem user, which hasn't got the possiblity to have access to share's. (I would get an exception about access denied from the file system when starting it up, but after changing the user I don't).
Under
server\SAPPRT\EPS1\global\config\cm the portal has created the following folders:
Backups
config
etc
reports
<b>Are there any one missing ?</b>
(to resolve the problem I tried create the following folders, but still the same problem:
system/updateQueue/events
system/command
system/deployment/archives
system/deployment/upgrades
utilities/connection_pools/db_type/default)
The property files in \usr\sap\EPS1\j2ee\j2ee_01\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\portal\system\cm
look correct, and also the file under portalapps/com.sap.portal.km.application (or something).
When I went into KM configuration in the portal, I noticed there were no JDBC connection pools, and I therefore created two as described in http://help.sap.com/saphelp_ep60sp2/helpdata/en/eb/d10ef2b6a311d5993900508b6b8b11/content.htm
But that is something which the installer should have done for me. (and still the connection pools won't start)
The main error message I get at startup is the following:
Jun 28, 2005 4:45:17 PM      com.sapportals.config.queue.UpdateQueueService [System_Thread_12] Warning": There was a problem initializing the queue service for config manager : configuration plugin for queue service not found (/system/updateQueue/events)
java.lang.RuntimeException: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.initConfig(JDBCConnectionPoolManager.java:566)
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.getInstance(JDBCConnectionPoolManager.java:99)
     at com.sap.workflow.util.config.WorkflowProperties.initProperties(WorkflowProperties.java:188)
     at com.sap.workflow.util.config.WorkflowProperties.<init>(WorkflowProperties.java:48)
     at com.sap.workflow.util.config.WorkflowProperties.getInstance(WorkflowProperties.java:56)
     at com.sap.workflow.es.portal.WFPortalService.init(WFPortalService.java:74)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
java.lang.NullPointerException
     at javax.naming.NameImpl.<init>(NameImpl.java:250)
     at javax.naming.CompositeName.<init>(CompositeName.java:223)
     at com.inqmy.services.jndi.implclient.OffsetClientContext.parse(OffsetClientContext.java:129)
     at com.inqmy.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:200)
     at javax.naming.InitialContext.lookup(InitialContext.java:345)
     at com.sap.workflow.util.ejbfactory.EJBFactory.getUserTransaction(EJBFactory.java:282)
     at com.sap.workflow.es.portal.WFPortalService.init(WFPortalService.java:83)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstance(PortalServiceItem.java:678)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.createServiceInstance(PortalServiceItem.java:519)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:875)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.<init>(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
And if I go to content administration->KM content I get the following stack trace:
java.lang.RuntimeException: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.initConfig(JDBCConnectionPoolManager.java:566)
     at com.sapportals.wcm.util.jdbc.connectionpool.JDBCConnectionPoolManager.getInstance(JDBCConnectionPoolManager.java:99)
     at com.sapportals.wcm.repository.runtime.CmSystemInfo.createDBConnection(CmSystemInfo.java:221)
     at com.sapportals.wcm.repository.runtime.CmSystemInfo.checkDB(CmSystemInfo.java:138)
     at com.sapportals.wcm.repository.runtime.CmSystem.startUp(CmSystem.java:226)
     at com.sapportals.wcm.repository.runtime.CmSystem.getInstance(CmSystem.java:161)
     at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:81)
     at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:260)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:736)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:909)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
com.sapportals.wcm.repository.ResourceException: CM Startup failed: CM startup failed: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.repository.ResourceException.fillInStackTrace(ResourceException.java:401)
     at java.lang.Throwable.(Throwable.java:85)
     at java.lang.Exception.(Exception.java:33)
     at com.sapportals.wcm.WcmException.(WcmException.java:78)
     at com.sapportals.wcm.WcmException.(WcmException.java:74)
     at com.sapportals.wcm.util.content.ContentException.(ContentException.java:42)
     at com.sapportals.wcm.repository.ResourceException.(ResourceException.java:251)
     at com.sapportals.wcm.repository.runtime.CmAdapter.makeStartupResourceException(CmAdapter.java:397)
     at com.sapportals.wcm.repository.runtime.CmAdapter.getResource(CmAdapter.java:84)
     at com.sapportals.wcm.portal.service.KMServiceImpl.afterInit(KMServiceImpl.java:260)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.__initServiceInstanceStep2(PortalServiceItem.java:736)
     at com.sapportals.portal.prt.core.broker.PortalServiceItem.startServices(PortalServiceItem.java:909)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startLoadOnStartupServices(PortalAppBroker.java:1470)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.start(PortalAppBroker.java:1426)
     at com.sapportals.portal.prt.core.broker.PortalAppBroker.startNonCoreApplications(PortalAppBroker.java:1383)
     at com.sapportals.portal.prt.runtime.Portal.init(Portal.java:371)
     at com.sapportals.portal.prt.core.PortalCoreInitializer.coreInit(PortalCoreInitializer.java:55)
     at com.sapportals.portal.prt.dispatcher.PortalInitializer.(PortalInitializer.java:129)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doSetupPortalInitializer.run(Dispatcher.java:160)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:358)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$000(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$InitRunner.run(Dispatcher.java:113)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.init(Dispatcher.java:391)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:3284)
     at com.inqmy.services.servlets_jsp.server.ServletContextFacade.init(ServletContextFacade.java:2542)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.createContext(ServletsAndJspImpl.java:765)
     at com.inqmy.services.servlets_jsp.server.WebApplicationStarter.run(WebApplicationStarter.java:57)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
javax.servlet.ServletException: CM Startup failed: CM startup failed: Failed to init. connection pool configuration: Failed to init. connection pool configuration: missing configurable /cm/utilities/connection_pools/db_type/default
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:111)
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:576)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:669)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:209)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:832)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1245)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
I appreciate any help !
PS sorry for the unstructured post, but I am hungry and want to go home now.

The files under the SAPPRT share had somehow failed (some where there, but a lot of the important ones where missing).
I found out that these files were in .configarchive files in the par files to be deployed, and manually unpacked them using these two commands
$ for file in `ls -1 .par` ; do unzip $file ".configarchive" -d extracted >> logfile.txt ; done
$ for file in `ls -1 *.configarchive` ; do unzip -o $file -d extracted >> logfile.txt ; done
Afterwards I had to make some tiny customization (search for %[a-zA-Z]% , especially for the connection pools.
Then a restart, and most of it seems to work (the system will not live much longer so that is acceptable)

Unable to init TinyMCE in Adobe Air 1.0.1

Hi guys, was wondering how to init TinyMCE in Adobe Air 1.0.1
basically i've coded a sample of TinyMCE 3.06 in a html file.
is a fully client script running perfectly in IE and firefox
however, after i compile under adobe runtime adl, it fails to init
at all.
any ideas how to work around? i've tried the bee sample it i
think is written in the older runtime, couldnt get it to work even
if i redo the application.xml...
Sample of
Source file

Hi,
Bee sample uses an older version of the TinyMCE editor (I
think it's 2.1.2) but the sample is running on the latest AIR
runtime (1.0.1) - here is the link to it:
http://www.adobe.com/devnet/air/ajax/samples.html
However, due to security restrictions in the root content (in
what we call the application sandbox) TinyMCE can run in non
application sandbox but still be used from the root content. That's
how it was implemented in Bee and it basically should also work
with the latest version you have (3.06).
Please check it out and I'll try to help you if you run into
issues.
Best regards,
Dragos

[SOLVED] alsa daemon error during init with Thinkpad X220

Hi,
I just updated my system (including a kernel update). After reboot, I found alsa daemon, which is used to restore previous volume level, failed to start. I tried to start that daemon manually after the boot process is completed, and that produced an error message
sudo rc.d start alsa
:: Restoring ALSA Levels [BUSY]
Found hardware: "HDA-Intel" "Intel CougarPoint HDMI" "HDA:14f1506e,17aa21da,00100000 HDA:80862805,80860101,00100000" "0x17aa" "0x21da"
Hardware is initialized using a generic method
[FAIL]
However, the volume level restored successfully. It seems that recent Intel plantform provides two soundcard, and that error only affected the secondary card, which has nothing to do about system volume level.
Anyway, I hate to have a ``[FAIL]'' During init process. Any suggesting to get rid of that problem? Thanks
System Info: (I use linux-ck as my kernel with modified config)
uname -a
Linux Thomas 3.2.1-2-ck #1 SMP PREEMPT Sun Jan 15 00:16:41 CST 2012 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4)
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e)
0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 07)
0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
config.gz:
http://codepad.org/XtUSbtdw
(Edit typo)
Last edited by cap_sensitive (2012-01-17 06:12:01)

This morning, I performed a system update and I did not see any errors with alsa when I rebooted. Audio hardware is:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Have you tried manually restarting alsa after the system boots up to see if you get the same error? You can restart alsa with the following command:
sudo /etc/rc.d/alsa force-restart
Post your results. If the error occurs during the manual restart, it should also include some details about what caused the error

After last oes updates poa start failed

Hello,
I just updated my oes11 server with the last patches. After restart I
noticed, that the poa and the domain failed to start.
In /var/log/messages I found this lines:
startproc: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
startproc: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
startproc: exit status of parent of
/opt/novell/groupwise/agents/bin/gwmta: 9
startproc: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
Other servers with same constellation (oes11, gw 2014.sp1) restarted w/o
probs.
Problem with Lum? The po and domain files residing on NSS-volumes
Gotthard
Gotthard Anger
Anwenderbetreuung Netzwerkadministration
Landeskirchenamt der EKM
[email protected]
http://forums.novell.com/member.php?u=35038

Hello,
Just for the records:
Lum was the right idea. I reconfigured the LUM-option in yast and
rebooted the server.
No all runs fine.
Gotthard
Am 28.03.2015 um 10:36 schrieb Gotthard Anger:
> Hello,
>
> I just updated my oes11 server with the last patches. After restart I
> noticed, that the poa and the domain failed to start.
>
> In /var/log/messages I found this lines:
> startproc: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
> startproc: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
> startproc: exit status of parent of
> /opt/novell/groupwise/agents/bin/gwmta: 9
> startproc: nds_nss_GetGroupsbyMember: Failed to init socket, status = 0
>
> Other servers with same constellation (oes11, gw 2014.sp1) restarted w/o
> probs.
>
> Problem with Lum? The po and domain files residing on NSS-volumes
>
> Gotthard
>
Gotthard Anger
Anwenderbetreuung Netzwerkadministration
Landeskirchenamt der EKM
[email protected]
http://forums.novell.com/member.php?u=35038

Esscmd failing to init

Similar Messages

Maybe you are looking for