EtherCAT Error -2147138468 switching third party device to Safe Operational State

I have been successful in importing and detecting/adding a Lenord + Bauer Ethercat Encoder (GEL235).
Attached you will find the Device Profile.
But when I try to switch the Scan Engine to "Active", I eventually receive this error message: "An error occured while attempting to switch the I/O scan mode. LabVIEW: (Hex 0x80DF0019) The deployment connection timed out."
Trying to set the device EtherCAT Online State to "Safe Operational" on the slave device eventually returns "Error -2147138468 occurred at an unidentified location Possible reason(s): CoE operation fails because the CoE service is timeout. Ensure that each device in the EtherCAT network is powered on and properly connected."
I can confirm that the device is properly powered and connected. The EtherCAT ethernet port on the cRIO has a solid, green link indicator and all status indicators on the encoder are in their normal operational state except for the "Run" led which is flashing evenly, meaning the current state is "PRE-OPERATIONAL".
I can read the encoder position without any issues using "TwinCAT System Manager" from Beckhoff.
Any idea/tips on how I should proceed from this point to troubleshooting/fix the issue?
Regards,
Danny Lepage
CEL Aerospace Test Equipment LTD
Attachments:
ni_support.zip ‏90 KB

You might want to share this information with the developers at Happauge

Similar Messages

  • Cisco Prime Infrastructure 2.0 -- Third Party Devices

    Hello,
    we are using cisco prime infrastructure 2.0. Is it possible to manage third party devices? (We have a lot of Enterasys Switches)
    When i want to Archive the config of the device there is an error --> No Device Package found for the specific device.
    It is necessary to install device packages for third party devices? Where can i find and install these packages?
    Thx in advance

    it seems not to be on the road-map according to the functional /feature comparison between LMS and PI 2.0:
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
    ...and I doubt it will come (quickly) because config management has a lot of pitfalls and Cisco has a lot to do to get around all of them with their own devices..
    However, Inventory Management for third party devices is on the road-map
    older version of the document (feature comparison PI 1.2 - LMS 4.2) can be found here:
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/app_note_c27-716230.html

  • Alarms for Third party devices on Cisco PI v 2.1

    Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?

    Hi,
    AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
    we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
    Third-party support   
     ●  Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • PI 2.1, exclude third party device from config archive

    Hi,
    Customer runs PI 2.1. He has also third party devices in the PI inventory.
    Now, every time the configuration archive job is running, this third party devices are failing. Which is the normal behavior. Is it possible to set,for example a filter, to exclude this devices from the configuration archive job?
    thank you very much for your help
    Hansruedi

    Hi Hansruedi,
    we have to manually exclude them from Config collection::
    Operate >Device Work Center > Configuration Archives  ,
    Check the check box for "Name"  , this will select all the devices  then unselect the one you DON't want to get archived .
      click on " scheduled Archive" and scheduled it as per your need (hourly , weekly ...etc..)
    Thanks-
    Afroz
    **Ratings Encourages Contributors ****

  • Extending wireless LAN using third-party devices?

    I know that with multiple Airport Extreme base stations, it’s a simple matter to extend the range of an 802.11n network by using the “Extend a wireless network” or “Participate in a WDS network” wireless modes. It seems like of the two, “Extend a wireless network” might be the easier of the two to configure. Does anyone have recommendations / preferences between the two modes?
    Separately, although I can afford Airport Extreme stations personally, I have friends with the same desire to extend their existing wireless network but who can’t afford Airport Extreme stations. Is there a lower-cost way to do this with Netgear, D-Link, or other third-party devices? Does this mean all of the devices must support WDS to work, or are there other solutions? Do you have recommendations for specific models that work well for extending networks (preferrably also models that support WPA/WPA2, and not just WEP).
    Any help would be appreciated. I won’t go into the details of the distances involved or intervening walls. Let’s just say a hop or two should stretch the distance.

    Bob Timmons wrote:
    "Extend a wireless network runs at "n" wireless speeds with minimal bandwidth loss on the network
    WDS runs at "g" wireless speeds, even if you are using newer "n" devices. The bandwidth on the entire wireless network is cut in half for each "remote" added to the network. So, with one "remote" in a WDS, you have a "g" wireless network running at 1/2 speed. If you have two "remotes" in a WDS, you have a "g" wireless network running at 1/4 speed.
    Bob — thank you so much for the help.
    Years ago in the days when Airport Extreme base stations supported 802.11b/g only, I remember setting up a WDS network between three Airport Extreme base stations. I seem to remember that the one in the middle was set up in a “relay” mode to bridge between the two remote base stations. In theory, using multiple relays, you could extend a network arbitrarily far as long as you could get power to all the devices and didn’t care about all sorts of bandwidth, latency, and signal strength hits.
    Is it the case that with the 802.11n in current Airport Extreme stations you can't set up relays in a similar fashion using the "Extend a Network" wireless mode? I was looking at Apple’s “Designing Airport Networks Using Airport Utility” document, which doesn’t explicitly say, but seems to suggest that the central base station (operating in “Create a Wireless Network” mode) can be extended if the “allow this network to be extended” button is set, and then on a second base station you can use the “Extend a Wireless Network” mode to extend it. However, there’s nothing to suggest that you could extend off the second base station. Does anyone know if that’s possible?
    I was looking at Netgear-brand wireless extenders this morning (http://www.netgear.com/home/products/wireless-range-extenders/wireless-range-ext enders/default.aspx) which sell for around $75 to $80 each online. They can extend any 802.11b/g/n network if the remote device supports the WPS (Wireless Protected System) standard, as most Netgear products appear to do (I believe Airport Extreme base stations don’t support WPS). They make it quite easy to connect Netgear wireless devices using “Push ’N’ Connect” buttons on the devices.
    However, Netgear pre-sales specialist pointed out that the Netgear wireless extenders (the WN2000RPT is the current model) can similarly only extend out by one hop from the “center” and cannot operate as relay to get out further, as would be the case for WDS-based relays.
    Is it the case that you need to find devices that support WDS (Wireless Distributed System) to allow for multiple relays to cover longer distances? I know that Airport Extreme base stations, both current models and the older b/g models, support WDS. Can anyone recommend third-party WDS-capable wireless modems or access points?
    Any help would be appreciated.

  • How to enable the "SNMP TRAP" Funcation in Prime Infrasructure 2.0 for receiveing the Third Party Device's SNMP TRAP

    I already uploaded the third party device's MIB to PI2.0,  but could not recive the third party device's SNMP TRAP properly .
    what do I need check for the PI ? or what do I need to setup for the PI?
    Thanks

    Duplicate post of :
    https://supportforums.cisco.com/discussion/12148626/how-enable-snmp-trap-funcation-prime-infrasructure-20-receiveing-third-party
    -Thanks
    Vinod

  • Self made trigger for third party device?

    Hi, everyone! I am new to labview programming. 
    Recently I have been trying to realize a function to trigger(or start) the third party device to do acquisition. I want to use the DAQmx to acquire one channel signal(which is continous pulse signal). And use this DAQmx acquired signal to trigger the third party device. I want each pulse signal to start the third party device to do acquisition.
    Could someone give me some advice or suggestions? I would be grateful for any of your help. Thanks in advance.

    Hi, Lynn
    Thank you very much. I am glad to get your reply. First I am sorry for my lack of knowledge of Labview. I will learn and be more careful of using the terminology. 
    I have "NI PCI-6052E" as the hardware device. And I use "BNC-2120" connector block to connect the trigger source. I useonly one channel of 6052E to acquire the signal. This trigger signal actually is periodic pulse signal of voltage ranging from 0 to 5V. The pulse voltage is 0V, all other are 5V. 
    I give my answers to your questions as followings.
    What kind of signal does the third party device require for triggering?Is it a physical signal like a voltage or current?
    The third party device actually doesn't have to use this pulse trigger to start, I just want to make a customized trigger to sync the third party device with the pulse signal. And each pulse make the device start working. This pulse trigger is a voltage signal that can be linked to 6052E by BNC connectors.
    Is it a message transmitted via USB, Ethernet, or tin cans and a string?
    I am sorry, I don't get this. I guess it transmitted by BNC.
    What is the timing of the signal you are acquiring? 
    I used the sample clock in DAQmx timing function. 
    How much latency can you tolerate between the acquired signal and the trigger to the third party device?
    I actually can control the interval time between each pulse. I require this interval time to be more than 1s and during this time the third party device can do acquisition itself. So the latency I think should be in the range of ms.
    Do you need to do any signal processing or analysis on the acquired signal to generate the trigger?
    The trigger signal is pulse signal. Actually I don't know much about signal processing, I don't know what kind signal is better for my application. If you have any better idea, please let me know.
    Thanks a lot.
    Yu

  • Is LMS3.2 support third party devices??

    Hi,
    Running LMS 3.2.
    Can it possible to monitor or add the third party devices like Juniper and Checkpoint ???
    Thanks & Regards,
    Krishna

    Hi Krishna,
    No it's not Possible , Below is the list of Devices supported in LMS 3.2 :
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html
    Thanks--
    Afroj

  • Operate a third party device

    HI
    I try to operate a third party Camera (C CAM) by LabVIEW. I try by call library function node. But I fail to get data by call library function node.
    Is there have any other way to operate third party device except call library function / CIN?
    Thanks
    Kamal

    Kamal;
    Other ways to access a third party device is via ActiveX, sending commands via the system exec VI, etc. However, my guess is that you need to try harder with the .dll
    Make sure you check the following articles: An Overview of Accessing DLLs or Shared Libraries from LabVIEW and External Code for LabVIEW - CIN / DLL - Starting Point
    The article "Can LabVIEW C? - Example 3: Using the Right Tools with LabVIEW" is an excellent starting point.
    I don't know about that camera, but if it is a webcam, you can do a search on toolkits to access a webcam from LabVIEW.
    Regards;
    Enrique
    www.vartortech.com

  • Ethercat connection between windowsPC an third party device.

    We want to create an ehtercat connection between a windowsPC an a frequency converter from Stöber(company).
    The connection has not to be real-time capable.
    Is this connection possible without buying any third-party drivers?
    rgds Reinhard

    Hi Reinhard,
    Our EtherCAT driver only works for our Real-Time targets.  Unfortunately, there is no Windows solution for NI-Industrial Communications for EtherCAT.
    Matt S.
    Industrial Communications Product Support Engineer
    National Instruments

  • Error calling a third party WSDL from BPEL

    Hi,
    I am trying to invoke a third party WSDL. This WSDL belongs to Oracle OPPM. When I call this wsdl from SOAPUI or even from the Enterprise Manger, it works fine.
    However, when I call it from BPEL, it is giving me an error. Here is the request and error response:
    Request
    <messages>
    <input>
    <Login_Input>
    <part name="sUser">
    <sUser xsi:type="def:string">Username</sUser>
    </part>
    <part name="sPassword">
    <sPassword xsi:type="def:string">Password</sPassword>
    </part>
    <part name="lTimeOut">
    <lTimeOut xsi:type="def:int">10</lTimeOut>
    </part>
    </Login_Input>
    </input>
    Response
    <fault>
    <bpelFault>
    <faultType>0</faultType>
    <remoteFault>
    <part name="summary">
    <summary>Server was unable to read request. ---> There is an error in XML document (1, 2168). ---> <Login xmlns='http://tempuri.org/'> was not expected.</summary>
    </part>
    <part name="detail">
    <detail>oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client received SOAP Fault from server : Server was unable to read request. ---> There is an error in XML document (1, 2168). ---> <Login xmlns='http://tempuri.org/'> was not expected.</detail>
    </part>
    <part name="code">
    <code>{http://schemas.xmlsoap.org/soap/envelope/}Client</code>
    </part>
    </remoteFault>
    </bpelFault>
    </fault>
    <faultType>
    <message>0</message>
    </faultType>
    </messages>
    I checked the diagnostics logs and it is not giving me any further information.
    I think the issue is with the WSDL file. I tried importing the WSDL locally too, but I cannot get rid of this error.
    I also tried to import the namespace in the <WSDL:Types> area, but no luck.
    WSDL
    <?xml version="1.0" encoding="utf-8"?>
    <wsdl:definitions
         targetNamespace="http://tempuri.org/"
         xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
         xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/"
         xmlns:s="http://www.w3.org/2001/XMLSchema"
         xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
         xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
         xmlns:tns="http://tempuri.org/"
         xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
         xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
         xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
        >
        <wsdl:types>
        </wsdl:types>
        <wsdl:message name="DebugSoapIn"/>
        <wsdl:message name="DebugSoapOut"/>
        <wsdl:message name="LoginSoapIn">
            <wsdl:part name="sUser" type="s:string"/>
            <wsdl:part name="sPassword" type="s:string"/>
            <wsdl:part name="lTimeOut" type="s:int"/>
        </wsdl:message>
        <wsdl:message name="LoginSoapOut">
            <wsdl:part name="Result" type="s:string"/>
        </wsdl:message>
        <wsdl:message name="ReleaseSecurityTokenSoapIn">
            <wsdl:part name="sSecurityToken" type="s:string"/>
        </wsdl:message>
        <wsdl:message name="ReleaseSecurityTokenSoapOut"/>
        <wsdl:message name="GetCurrentUserIDSoapIn">
            <wsdl:part name="sSecurityToken" type="s:string"/>
        </wsdl:message>
        <wsdl:message name="GetCurrentUserIDSoapOut">
            <wsdl:part name="Result" type="s:int"/>
        </wsdl:message>
        <wsdl:portType name="psPortfoliosSecurityRpcSoap">
            <wsdl:operation name="Debug">
                <wsdl:input message="tns:DebugSoapIn"/>
                <wsdl:output message="tns:DebugSoapOut"/>
            </wsdl:operation>
            <wsdl:operation name="Login">
                <wsdl:input message="tns:LoginSoapIn"/>
                <wsdl:output message="tns:LoginSoapOut"/>
            </wsdl:operation>
            <wsdl:operation name="ReleaseSecurityToken">
                <wsdl:input message="tns:ReleaseSecurityTokenSoapIn"/>
                <wsdl:output message="tns:ReleaseSecurityTokenSoapOut"/>
            </wsdl:operation>
            <wsdl:operation name="GetCurrentUserID">
                <wsdl:input message="tns:GetCurrentUserIDSoapIn"/>
                <wsdl:output message="tns:GetCurrentUserIDSoapOut"/>
            </wsdl:operation>
        </wsdl:portType>
        <wsdl:binding name="psPortfoliosSecurityRpcSoap" type="tns:psPortfoliosSecurityRpcSoap">
            <soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
            <wsdl:operation name="Debug">
                <soap:operation style="rpc" soapAction="http://tempuri.org/action/psPortfoliosSecurity.Debug"/>
                <wsdl:input>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:input>
                <wsdl:output>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:output>
            </wsdl:operation>
            <wsdl:operation name="Login">
                <soap:operation style="rpc" soapAction="http://tempuri.org/action/psPortfoliosSecurity.Login"/>
                <wsdl:input>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:input>
                <wsdl:output>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:output>
            </wsdl:operation>
            <wsdl:operation name="ReleaseSecurityToken">
                <soap:operation style="rpc" soapAction="http://tempuri.org/action/psPortfoliosSecurity.ReleaseSecurityToken"/>
                <wsdl:input>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:input>
                <wsdl:output>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:output>
            </wsdl:operation>
            <wsdl:operation name="GetCurrentUserID">
                <soap:operation style="rpc" soapAction="http://tempuri.org/action/psPortfoliosSecurity.GetCurrentUserID"/>
                <wsdl:input>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:input>
                <wsdl:output>
                    <soap:body use="encoded" namespace="http://tempuri.org/message/" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
                </wsdl:output>
            </wsdl:operation>
        </wsdl:binding>
        <wsdl:service name="psPortfoliosSecurityRpc">
            <wsdl:port name="psPortfoliosSecurityRpcSoap" binding="tns:psPortfoliosSecurityRpcSoap">
                <soap:address location="http://dc01oppmsv01.molina.mhc/ProSightSOAP/psPortfoliosSecurityRpc.asmx"/>
            </wsdl:port>
        </wsdl:service>
    </wsdl:definitions>
    Thanks
    Asif Hussain

    Thanks chrisswhite,
    I should have mentioned that I tried this too and it didn't solve the problem. You're right though, I should be compiling with -fPIC anyway.
    Jon

  • Error While creating Third Party order in VA01

    HI
    am trying to create Third Party order in VA01  in my sand box with material ( BANS item category Group)  getting error
    NOT POSSIBLE TO DETERIMINE A CONSUMPTION ACCOUNT in OBYC GBB  i tried to do some setting in VAX , VBR with valuation class 0001 but dont know the exact GL Account . kindly help.

    For VAX, it ought to be similar to what you have maintained in your VKOA setting for ERL Account Key.
    For VBR, it ought to be for Stores & spares-consumed. For this use tcode FS00. In G/L account no., click F4 form your keyboard and provide Stores or spares in G/L long text. Record the G/L acc for Stores & spares based on your requirement and maintain the same against VBR.
    Hope it can assist you or as already mention, take assistance of FI consultant in your team.
    Take care
    Thanks *\& Regards
    JP

  • 2 factor authentication for third party devices

    Can anyone recommend a 2factor authentication service that will query a OD user database and process authentication for third part devices ie firewall/vpn via RADIUS?

    Yes it is and you have the following options:
    OTP using external RADIUS server and RSA tokens
    EAP-Chaining using the AnyConnect Agent and Cisco ISE
    MAR (machine access restrictions).  If the machine had not performed authentication the user will not be authorized
    Layer 3 security on the Wireless LAN Controller

  • Error While importing third party certificate

    Hi,
    In my application I'm using HTTPS for secure connectivity.For that purpose I signed my midlet using a third Party certificate (GoDaddy's Certificate).But when I'm hitiing the url it is not working.
    I've done this with generating my own certificate with Tomcat.It is working fine there.I followed the following topic to create Certificate for TomCat
    http://143.129.203.3/s/sitter/sl2nap/javaSSLprogr.htm
    but when i'm hitiing some live url then it is not working!
    Please provide me proper help if possible
    Thanx in advance

    Slawrence,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Error while executing third party wsdl.

    Hi All,
    In our project, there is a need to execute the WSDL available in this url
      http://ec.europa.eu/taxation_customs/vies/checkVatService.wsdl
    While executing , its throwing an error message as shown below:
    Web service returned error. Fault Code: "(http://schemas.xmlsoap.org/soap/envelope/)Server" Fault String: "javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: com.lexmark/home~mdm_vat_ear) Exception raised from invocation of public java.lang.String com.lexmark.VAT_Validate.VatNumberValidate(java.lang.String,java.lang.String) method on bean instance com.lexmark.VAT_Validate@19f70f97 for bean com.lexmark/home~mdm_vat_ear*annotation|com.lexmark~home~mdm_vat_ejb.jar*annotation|VAT_Validate in application com.lexmark/home~mdm_vat_ear.; nested exception is: javax.xml.ws.WebServiceException: Connection IO Exception. Check nested exception for details. (Unable to connect to ec.europa.eu:80 - Connection timed out: connect)."
    Note: After generating clients noticed that under the generated package( eu.europa.ec.taxud.vies.services.checkvat) the class (CheckVatPortType) is having  parameters different from that of WSDL. I don’t know whether this is the cause.
    Steps implemented:
    1.       Added the ec.europa.eu in the nwa--> soa --> soa middleware settings--> WS Navigator white list.
    2.       Created a ejb project and import wsdl.
    3.       Right click on the WSDL and choose options WSDLà Generate Client.
    4.       Java classes are generated.
    5.       Create a session bean and implement the code for executing the wsdl as follows:
    @WebServiceRef (name="checkVatPortType")
                     CheckVatService service;
    public String VatNumberValidate(String Country,String VATNumber)
    /**Till test 3 there is no issues.*/
                    String test="1";
                    CheckVatPortType portType=service.getPort(CheckVatPortType.class);
                    test="2";
                    Holder<String> address=new Holder<String>();
                    Holder<String> name=new Holder<String>();
                    Holder<XMLGregorianCalendar> requestDate=new Holder<XMLGregorianCalendar>();
                    Holder<Boolean> valid=new Holder<Boolean>();
                    Holder<String> country=new Holder<String>(Country);
                    Holder<String> VatNumber=new Holder<String>(VATNumber);
                    test ="3";
                    portType.checkVat( country, VatNumber, requestDate, valid, name, address);
                    test ="4";
                     return test;
    Awaiting replies.
    Best Wishes,
    Idhaya R

    I need help with a question, I'm building a Web Dynpro application, and created a model for connecting to WebService (http://ec.europa.eu/taxation_customs/vies/checkVatService.wsdl) in order to validate the Vat number of European countries.
    I'm not using EJB but creating a model "Adaptive Service Model"
    When instantiating the classes created served web: CheckVat.java, CheckVatResponse.java, etc.
    But when checking the created methods, I realized that was not created the method to send the VAT number and the country.
    The problem is that I have to pass two parameters to run the query: VAT number and parents right?
    In checkVat class, mapping the Web Dynpro not created the method with the name of CheckVat, I looked at all the ".java", the most that have are the "sets" and "stay."
    Has anyone used this WSDL, as it did to send the parameters?
    Many Thanks.

Maybe you are looking for