Operate a third party device

HI
I try to operate a third party Camera (C CAM) by LabVIEW. I try by call library function node. But I fail to get data by call library function node.
Is there have any other way to operate third party device except call library function / CIN?
Thanks
Kamal

Kamal;
Other ways to access a third party device is via ActiveX, sending commands via the system exec VI, etc. However, my guess is that you need to try harder with the .dll
Make sure you check the following articles: An Overview of Accessing DLLs or Shared Libraries from LabVIEW and External Code for LabVIEW - CIN / DLL - Starting Point
The article "Can LabVIEW C? - Example 3: Using the Right Tools with LabVIEW" is an excellent starting point.
I don't know about that camera, but if it is a webcam, you can do a search on toolkits to access a webcam from LabVIEW.
Regards;
Enrique
www.vartortech.com

Similar Messages

  • PI 2.1, exclude third party device from config archive

    Hi,
    Customer runs PI 2.1. He has also third party devices in the PI inventory.
    Now, every time the configuration archive job is running, this third party devices are failing. Which is the normal behavior. Is it possible to set,for example a filter, to exclude this devices from the configuration archive job?
    thank you very much for your help
    Hansruedi

    Hi Hansruedi,
    we have to manually exclude them from Config collection::
    Operate >Device Work Center > Configuration Archives  ,
    Check the check box for "Name"  , this will select all the devices  then unselect the one you DON't want to get archived .
      click on " scheduled Archive" and scheduled it as per your need (hourly , weekly ...etc..)
    Thanks-
    Afroz
    **Ratings Encourages Contributors ****

  • Extending wireless LAN using third-party devices?

    I know that with multiple Airport Extreme base stations, it’s a simple matter to extend the range of an 802.11n network by using the “Extend a wireless network” or “Participate in a WDS network” wireless modes. It seems like of the two, “Extend a wireless network” might be the easier of the two to configure. Does anyone have recommendations / preferences between the two modes?
    Separately, although I can afford Airport Extreme stations personally, I have friends with the same desire to extend their existing wireless network but who can’t afford Airport Extreme stations. Is there a lower-cost way to do this with Netgear, D-Link, or other third-party devices? Does this mean all of the devices must support WDS to work, or are there other solutions? Do you have recommendations for specific models that work well for extending networks (preferrably also models that support WPA/WPA2, and not just WEP).
    Any help would be appreciated. I won’t go into the details of the distances involved or intervening walls. Let’s just say a hop or two should stretch the distance.

    Bob Timmons wrote:
    "Extend a wireless network runs at "n" wireless speeds with minimal bandwidth loss on the network
    WDS runs at "g" wireless speeds, even if you are using newer "n" devices. The bandwidth on the entire wireless network is cut in half for each "remote" added to the network. So, with one "remote" in a WDS, you have a "g" wireless network running at 1/2 speed. If you have two "remotes" in a WDS, you have a "g" wireless network running at 1/4 speed.
    Bob — thank you so much for the help.
    Years ago in the days when Airport Extreme base stations supported 802.11b/g only, I remember setting up a WDS network between three Airport Extreme base stations. I seem to remember that the one in the middle was set up in a “relay” mode to bridge between the two remote base stations. In theory, using multiple relays, you could extend a network arbitrarily far as long as you could get power to all the devices and didn’t care about all sorts of bandwidth, latency, and signal strength hits.
    Is it the case that with the 802.11n in current Airport Extreme stations you can't set up relays in a similar fashion using the "Extend a Network" wireless mode? I was looking at Apple’s “Designing Airport Networks Using Airport Utility” document, which doesn’t explicitly say, but seems to suggest that the central base station (operating in “Create a Wireless Network” mode) can be extended if the “allow this network to be extended” button is set, and then on a second base station you can use the “Extend a Wireless Network” mode to extend it. However, there’s nothing to suggest that you could extend off the second base station. Does anyone know if that’s possible?
    I was looking at Netgear-brand wireless extenders this morning (http://www.netgear.com/home/products/wireless-range-extenders/wireless-range-ext enders/default.aspx) which sell for around $75 to $80 each online. They can extend any 802.11b/g/n network if the remote device supports the WPS (Wireless Protected System) standard, as most Netgear products appear to do (I believe Airport Extreme base stations don’t support WPS). They make it quite easy to connect Netgear wireless devices using “Push ’N’ Connect” buttons on the devices.
    However, Netgear pre-sales specialist pointed out that the Netgear wireless extenders (the WN2000RPT is the current model) can similarly only extend out by one hop from the “center” and cannot operate as relay to get out further, as would be the case for WDS-based relays.
    Is it the case that you need to find devices that support WDS (Wireless Distributed System) to allow for multiple relays to cover longer distances? I know that Airport Extreme base stations, both current models and the older b/g models, support WDS. Can anyone recommend third-party WDS-capable wireless modems or access points?
    Any help would be appreciated.

  • Alarms for Third party devices on Cisco PI v 2.1

    Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?

    Hi,
    AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
    we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
    Third-party support   
     ●  Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • Cisco Prime Infrastructure 2.0 -- Third Party Devices

    Hello,
    we are using cisco prime infrastructure 2.0. Is it possible to manage third party devices? (We have a lot of Enterasys Switches)
    When i want to Archive the config of the device there is an error --> No Device Package found for the specific device.
    It is necessary to install device packages for third party devices? Where can i find and install these packages?
    Thx in advance

    it seems not to be on the road-map according to the functional /feature comparison between LMS and PI 2.0:
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/guide_c07-729089.html
    ...and I doubt it will come (quickly) because config management has a lot of pitfalls and Cisco has a lot to do to get around all of them with their own devices..
    However, Inventory Management for third party devices is on the road-map
    older version of the document (feature comparison PI 1.2 - LMS 4.2) can be found here:
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps12239/app_note_c27-716230.html

  • How to enable the "SNMP TRAP" Funcation in Prime Infrasructure 2.0 for receiveing the Third Party Device's SNMP TRAP

    I already uploaded the third party device's MIB to PI2.0,  but could not recive the third party device's SNMP TRAP properly .
    what do I need check for the PI ? or what do I need to setup for the PI?
    Thanks

    Duplicate post of :
    https://supportforums.cisco.com/discussion/12148626/how-enable-snmp-trap-funcation-prime-infrasructure-20-receiveing-third-party
    -Thanks
    Vinod

  • Self made trigger for third party device?

    Hi, everyone! I am new to labview programming. 
    Recently I have been trying to realize a function to trigger(or start) the third party device to do acquisition. I want to use the DAQmx to acquire one channel signal(which is continous pulse signal). And use this DAQmx acquired signal to trigger the third party device. I want each pulse signal to start the third party device to do acquisition.
    Could someone give me some advice or suggestions? I would be grateful for any of your help. Thanks in advance.

    Hi, Lynn
    Thank you very much. I am glad to get your reply. First I am sorry for my lack of knowledge of Labview. I will learn and be more careful of using the terminology. 
    I have "NI PCI-6052E" as the hardware device. And I use "BNC-2120" connector block to connect the trigger source. I useonly one channel of 6052E to acquire the signal. This trigger signal actually is periodic pulse signal of voltage ranging from 0 to 5V. The pulse voltage is 0V, all other are 5V. 
    I give my answers to your questions as followings.
    What kind of signal does the third party device require for triggering?Is it a physical signal like a voltage or current?
    The third party device actually doesn't have to use this pulse trigger to start, I just want to make a customized trigger to sync the third party device with the pulse signal. And each pulse make the device start working. This pulse trigger is a voltage signal that can be linked to 6052E by BNC connectors.
    Is it a message transmitted via USB, Ethernet, or tin cans and a string?
    I am sorry, I don't get this. I guess it transmitted by BNC.
    What is the timing of the signal you are acquiring? 
    I used the sample clock in DAQmx timing function. 
    How much latency can you tolerate between the acquired signal and the trigger to the third party device?
    I actually can control the interval time between each pulse. I require this interval time to be more than 1s and during this time the third party device can do acquisition itself. So the latency I think should be in the range of ms.
    Do you need to do any signal processing or analysis on the acquired signal to generate the trigger?
    The trigger signal is pulse signal. Actually I don't know much about signal processing, I don't know what kind signal is better for my application. If you have any better idea, please let me know.
    Thanks a lot.
    Yu

  • Is LMS3.2 support third party devices??

    Hi,
    Running LMS 3.2.
    Can it possible to monitor or add the third party devices like Juniper and Checkpoint ???
    Thanks & Regards,
    Krishna

    Hi Krishna,
    No it's not Possible , Below is the list of Devices supported in LMS 3.2 :
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html
    Thanks--
    Afroj

  • 2 factor authentication for third party devices

    Can anyone recommend a 2factor authentication service that will query a OD user database and process authentication for third part devices ie firewall/vpn via RADIUS?

    Yes it is and you have the following options:
    OTP using external RADIUS server and RSA tokens
    EAP-Chaining using the AnyConnect Agent and Cisco ISE
    MAR (machine access restrictions).  If the machine had not performed authentication the user will not be authorized
    Layer 3 security on the Wireless LAN Controller

  • Connect and auto operate a third party s/w

    i am developed a s/w,nd i want to put this s/w's output in a third party s/w's input textbox and submit a button automatically(like automatic testing tools).
    i hav the .exe file only of that third party s/w...........so any one plz tell me how i trace that input textfield's win handler ID and submit button's win handler ID.
    I think if  i get those ID it will be possible.....................
    Please help me soon.
    my email-id:[email protected]

    I don't believe you can manipulate the display of another GUI application from java.
    I suggest you use an automated testing tool.

  • Ethercat connection between windowsPC an third party device.

    We want to create an ehtercat connection between a windowsPC an a frequency converter from Stöber(company).
    The connection has not to be real-time capable.
    Is this connection possible without buying any third-party drivers?
    rgds Reinhard

    Hi Reinhard,
    Our EtherCAT driver only works for our Real-Time targets.  Unfortunately, there is no Windows solution for NI-Industrial Communications for EtherCAT.
    Matt S.
    Industrial Communications Product Support Engineer
    National Instruments

  • EtherCAT Error -2147138468 switching third party device to Safe Operational State

    I have been successful in importing and detecting/adding a Lenord + Bauer Ethercat Encoder (GEL235).
    Attached you will find the Device Profile.
    But when I try to switch the Scan Engine to "Active", I eventually receive this error message: "An error occured while attempting to switch the I/O scan mode. LabVIEW: (Hex 0x80DF0019) The deployment connection timed out."
    Trying to set the device EtherCAT Online State to "Safe Operational" on the slave device eventually returns "Error -2147138468 occurred at an unidentified location Possible reason(s): CoE operation fails because the CoE service is timeout. Ensure that each device in the EtherCAT network is powered on and properly connected."
    I can confirm that the device is properly powered and connected. The EtherCAT ethernet port on the cRIO has a solid, green link indicator and all status indicators on the encoder are in their normal operational state except for the "Run" led which is flashing evenly, meaning the current state is "PRE-OPERATIONAL".
    I can read the encoder position without any issues using "TwinCAT System Manager" from Beckhoff.
    Any idea/tips on how I should proceed from this point to troubleshooting/fix the issue?
    Regards,
    Danny Lepage
    CEL Aerospace Test Equipment LTD
    Attachments:
    ni_support.zip ‏90 KB

    You might want to share this information with the developers at Happauge

  • Third party Device settings after change from DCHP to PPPoE

    Hi,
    I have an AEBS 802.11n connected to a Dell Inspiron 6400 running Windows XP SP2.
    I was using it with an elderly non-wireless broadband router for internet connection, but I have just changed to a broadband modem instead. This change has resulted in my having to change from DCHP to PPPoE, and enter my ISP password etc into my AEBS instead of my router.
    I have wireless internet access via my AEBS, no problem. But since I have swapped it to PPPoE my computer isn't 'seeing' a locally connected device, which I have on an ethernet cable into one of the LAN ports on my AEBS. (The device is actually a 'virtual radar' radio receiver.)
    I have checked the physical connections, which seem okay. And the device was being 'seen' correctly via the AEBS before I changed to PPPoE, so I suspect this change may have a bearing.
    Can anyone suggest any other AEBS settings which may need to be altered to make the device 'visible' again please?
    Thanks

    Hi,
    Yes, thanks for that.
    I have, in fact, now sorted my problem.
    What I did was to reconfigure the IP range that my AEBS was covering. I did this in the AirPort Utility Internet tab by:-
    1. Changing from DHCP to PPPoE
    2. Doing that brings up four sub-tabs, one of which is DHCP.
    3. On the DHCP tab, you can set the 'beginning IP address' and 'ending IP address', and I adjusted those so that they matched the assigned IP of my missing device.
    As soon as I did that, the device reappeared.
    (No... I wasn't clever enough to think of that myself. I received expert tuition from someone on the comp.sys.mac.hardware newsgroup.)

  • What IP address does an iPhone assign to a tethered third party device?

    I am a tutor and one of my students has tethered a PLC to his i/Phone but how do we find out the IP address?

    Hi Nicky36,
    It seems you may be receiving a pop up window or ad via Safari. You may want to reset Safari's browsing data such as history and cookies to resolve this. I've linked to an article that explains this process in further detail:
    Safari web settings on your iPhone, iPad, or iPod touch - Apple Support
    Clear information from your device
    To clear your history and cookies from Safari in iOS 8, tap Settings > Safari > Clear History and Website Data. In iOS 7 or earlier, tap Clear History and tap Clear Cookies and Data.
    To clear other stored information from Safari, tap Settings > Safari > Advanced > Website Data > Remove All Website Data.
    To visit sites without leaving a history, turn on private browsing.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Airplay Third Party Devices

    I was looking into using a device such as the Tronsmart T2000 to mirror my students ipads and android devices. Is this device legal to use in the US? Is it in violation because it uses Airplay to mirror?

    Yes I am positive. Plex uses AirPlay video streaming, not mirroring. When speaking to the Plex guys, they said that it should be buffering, since the Apple TV is responsible for deciding when and what to buffer.
    I come here to see if anyone else has had this issue and if its a known bug on Apple's end.

Maybe you are looking for

  • Open and Save dialog boxes are sorted reverse alpahbetically by default

    I have a user that experiences the same frustrating experience every time she restarts Apple Mail. All of her open and save dialog boxes in Mail are sorted from Z to A. She can click the name field to change the sort, but it will return to Z-A if she

  • Set text of container in DW CS3

    I'm building a site using CSS in DW CS3 (bought in May 2006) that has some photo gallery pages where a large image changes per thumbnails to its right that are clicked. The thumbnails are in their divs and the wished-for big image should appear in a

  • How many Delta types are availabvle in Lo Extraction

    How many Delta types are available in Lo Extraction please tell me i am facing in every interview. Thanks in advance, Ashok V

  • Webdynpro abap- ehp4 -hr-appraisals

    Hi , We have implemented the EHP4 -OSA using the Webdynpro abap applications. Application components used - se 80 - HAP_START_PAGE_POWL_UI .  - Webdynpro applications  - Application configuration - /sap/bc/webdynpro/sap/hap_start_page_powl_ui_ess . U

  • Function module CF_UT_UNIT_CONVERSION bdc_field_overflow error

    Hi All, the data type length is 13 for one of our fields. however the same is being passed onto function module CF_UT_UNIT_CONVERSION, the import parameter data type length is 9 due to which the system is giving error BCD_field_overflow error. due to