Ethernet and Airport

I always thought that speeds between wired and wireless were always different, but I didn't think it could be as big as 8000 kbps. My computer that is wired to the router can reach up to 8000 kbps faster than my notebook using Airport. All my software is up to date, so is there any thing else I can do?

*"so is there any thing else I can do?"*
No. Ethernet is generally always going to be faster than wireless.

Similar Messages

  • Swirching between ethernet and airport

    i want to be able to easily switch back and forth between ethernet and airport. is there a way to do this without having to plug/unplug the ethernet cable from airport to computer, computer to airport each time i want to change?

    Try the following:
    Open System Preferences (gear icon) on the dock
    Open Network
    Click the small gear icon at the bottom of the connection list area
    Click Set Service Order
    If Ethernet is at the top of the list and you want to switch to an AirPort connection, drag AirPort to the top of the list. Click OK, Click Apply
    If AirPort is at the top of the list and you want to switch to an Ethernet connection, drag Ethernet to the top of the list. Click OK, Click Apply

  • Ethernet and Airport Interfaces Reversed

    I created an image of the new Mac Book Pro(Mid 2010) and slapped it on the new Mac Mini(Mid 2010) and everything worked fine except one thing. I used the DVD that came with the Mac Book Pro(Mid 2010) to create the Master Image.
    Under Network Preferences, the Ethernet Interface is displaying the Airport status window(i.e, "Turn Airport On/Off" button is in there). And the Airport Interface is displaying the Ethernet stats.
    Any ideas what could be causing this?
    Message was edited by: jjpotter

    I had the same problem (reversed Ethernet and Airport interfaces) on my 13" MacBook Air after plugging in my Thunderbolt Display. The solution was to go to Network in System Preferences, click the minus symbol under interfaces to delete both of them, click plus to add each one back, then click Apply. Now everything is as it should be.

  • 10.5.6 - Network System Preferences confuses Ethernet and Airport

    Since upgrading to 10.5.6 I'm having odd behavior from Airport (which is the only network connection I typically use). Symptoms include Airport turning off when the MacBook wakes from sleep, and Airport not automatically connecting to my home network (to which it regularly reconnected prior to 10.5.6).
    The strangest symptom, however, is how Ethernet and Airport are mixed-up in the Network preference pane. I can't post a screen shot (hey Apple - why not?!) so I'll describe:
    * In the list of Services on the left side, the service named "Ethernet" has an Airport icon, and the service named "AirPort" has an Ethernet icon.
    * When Airport connects, a green dot appears next to the service named "Ethernet".
    * When I select the service named "Ethernet" (with the AirPort icon) I see options to the right mostly related to AirPort. Thus, it looks like the Network pref pane has become confused about the names of the services... BUT when I rename the services to correct, then restart the computer, the names go back to the mixed-up situation described above.
    Any ideas of how to fix?

    Or somebody's playing a prank on him.
    AirPort does turn itself off when the computer is asleep. It takes a few seconds for AirPort to reconnect. If the WiFi signal is weak or if there are a lot of network noise, AirPort may not reconnect for a long time.

  • 802.1x over ethernet and airport impossible together ??

    I am connected to my University network (and to the internet) through a 802.1x network (Through Ethernet, not Airport).
    I have an iPod Touch with which I want to connect to the Internet.
    I went under Sharing, and created a Wireless network sharing the Ethernet internet. I was able to connect my Mac WITHOUT 802.1x to the internet for some time (authorised for a short time by the university) and was able to access the Wifi network and the internet with the iPod Touch.
    However, as soon as I connect to the 802.1x network, Airport dismisses it's network, it just disappears ...
    Why does it do that, can I prevent it and if not, is there any alternative for my problem ?

    Yeah, I was just going on/hoping for... the 802.1x likeness.
    Have you repaired Permissions lately?
    Might try trashing these files & reboot...
    /Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    /Library/Preferences/com.apple.sharing.firewall.plist
    ... of course you dont have to trash them, you can just move them to the desktop to drag back if it doesn't work.

  • Yukon: Ethernet and Airport: Ethernet addresses...

    Sorry if this is a stupid question but what is the difference between the Yukon and Airport ethernet addresses?  Are they supposed to be the same or different? Many thanks.

    Hello,
    The first is Ethernet, the second is Wifi or Airport, those are two different interfaces, now as far as addresses go, they have IP addresses, and Hardware Machine Access Code addresses.
    To see them, At the Apple Icon at top left>About this Mac, then click on More Info, then click on Network.
    It can be confusing how the term Ethernet is used.

  • Mini Server, bridging Ethernet and Airport ?

    Hy there.
    I´ve got a Mini running 10.5 Server with Ethernet en0 and Airport. To set up for testing I´m want to set the Mini as a wireless bridge. With NAT and the gateway assistant, I`m only apple to set up routing with a block Airport -> Ethernet. In detail:
    Ethernet 192.168.100.x
    Airport 192.168.1.x with NAT and DHCP
    Clients connected to Airport aren`t able to go to the 192.168.100.x network.
    Is it possible to bridge the two nic´s?
    Aggregation won´t work on Airport.
    Thanks for reply.

    The network configuration details and the goals aren't entirely clear (to me) here, so I'm going to shot-gun several answers here. I (also) don't know how experienced you are with IP networking and terminology; apologies in advance.
    "Bridging" occurs at layer 2 and is relatively comparable to a network cable or such and thus arguably transparent to network traffic (you can't "see" a bridge at the network layer any more than you can "see" a hunk of network cable), where "Routing" is layer 3 and typically involves IP addresses and a routing stack. Bridging doesn't involve an IP network address for the intermediate device, where routing does.
    Your Mac Mini here lacks bridging capabilities, and would be either a non-routing host or (with two NICs and a requirement to route traffic through) an IP router.
    Various Airport devices can be configured as routers or as bridges. The default configuration is the former; as a WiFi router. If you want to run the Airport as a bridge, then it won't have an IP address. Various folks will refer to a WiFi device set up as a bridge as an Access Point, as well.
    Depending on the subnet configuration (and I will here assume you are using two subnets here, the 192.168.1.0/24 and 192.168.100.0/24 subnets) and if you're using your Airport as a router in 192.168.100.0/24, you'll need to set up the Mac Mini or another IP router-capable device in 192.168.1.0/24 as the default IP gateway (default router) within the Airport configuration. That default gateway (router) will itself need a path to the wider Internet, and routes to other subnets.
    Getting a Mac to function as a router and as a network gateway (and with NAT and firewall) is possible, but you'll have to set up the default routes appropriately. It's generally (far!) easier to use an external box for this purpose; a dedicated firewall and NAT and router box. It's also something I typically prefer; having users and software configuration changes and the usual sorts of activity found on a Mac OS X or Mac OS X Server occurring on a firewall can risk (accidentally, unintentionally) open up a remote exposure.
    If you want to use link aggregation with Mac OS X Server, then you'll usually need a network switch capable of IEEE 802.3ad link aggregation. AFAIK, Airport doesn't provide link aggregation.
    Apropos of nothing else in this reply, if you're planning to eventually use VPNs (tunnels), I'd also suggest getting out of 192.168.0.0/16 address range (and into 10.0.0.0/8 or 172.16.0.0/12, per RFC 1918), everybody uses that, and various tunnels need unique subnets both locally and on the target end of the connection.
    Here's an intro to [networking, routers and firewall|http://labs.hoffmanlabs.com/node/275] pieces, and a previous discussion of [IEEE 802.3ad link aggregation, BGP and such|http://discussions.apple.com/thread.jspa?messageID=9141545] here in the forums.
    It's my general preference to block access to the LAN with a dedicated firewall/NAT/router box for the reasons described above as well as other reasons; that box can act as the default gateway for all subnets, as well.
    If I've entirely missed your question with the above answer(s), hopefully the above can help us get a little closer to your particular goal and an appropriate solution.

  • Connecting to Xbox Live using Ethernet and Airport

    Is it possible to connect the xbox 360 using a ethernet cable to my powerbook g4, in order to utilise its wirelessly connected internet?
    and what do i have to enable etc to do so

    Try the following...
    To setup for Internet Sharing (Wireless to Wired):
    Enable Software Firewall
    System Preferences > Sharing > Firewall
    - Click Stop to start the software firewall
    Setup Port Order
    System Preferences > Network > Show > Network Port Configurations
    - Verify that "AirPort" and "Built-In Ethernet" are enabled.
    - Verify that "AirPort" is at the top of the list, followed by "Built-In Ethernet."
    - Click "Apply Now."
    Configure the Internet Connection
    System Preferences > Network > Show > AirPort > TCP/IP
    - Configure IPv4: Using DHCP
    - Configure IPv6: Automatically or Off
    Enable Internet Sharing
    System Preferences > Sharing > Internet
    - Share your connection from: AirPort
    - To computers using: Built-In Ethernet (checked) (Note: Uncheck all other entries in the list.)
    - Click Start

  • Win XP Serv Pk 3 "Limited or no Connectivity" Error on Ethernet and Airport

    Hi,
    I have a 2009 MacBook Pro (dual boot) with a fresh install of Windows XP, SP3 and Boot Camp drivers. But I can’t get it to work properly with any other computer on a network, connected via ethernet or wifi. I have a "Limited or no Connectivity” message at all times. Other computers on my network can connect to my MBP, but I can’t connect to them. The MBP is sending out hundreds of packets, but only receiving 1 or 2. It also fails when trying to establish an IP address with my network.
    I am a long time mac user and unfamiliar with Windows networking, any help would be very much appreciated!
    Thanks!
    Christopher

    OK... I'm... annoyed, to say the least.
    I have just set up XP-SP3 under bootcamp. Installation went fine, it boots, I'm in Windoze now.
    I can seem to get it to interface with my Airport Extreme basestation. (I had to connect my ethernet to get on-line here)
    I get to a window that says "choose a wireless network". I pick my DJ Tempo's network. (It works just fine under OS 10.6.5.)
    I click "connect".
    I get a window that says "The network 'DJ Tempo's Network' requires a network key (also called a WEP key or WPA key). A network key helps prevent unknown intruders from connecting to this network."
    I put in the password for my Basestation, and click "connect".
    I then get a window that says "The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hex...
    This is probably where my problem lies. My Basestation password is not 5 or 13 characters.
    Have I told you enough to arrive at a conclusion?
    ANY help will be most appreciated. It's a perfect example of why "I don't do Windoze".

  • After 10.4.10 no ethernet and Airport come and go!

    After I upgraded to 10.4.10 my MacBook can't read any network connection from the Ethernet port. Changed cables, went to 3 different modems, nothing. It shows there's the port but when I plug the cable it doesn't recognize.
    Than my only chance to enter online: Airport! Nothing there too. Connection comes and go, sometimes not even Skype enters, sometimes browsing is impossible.
    Than I updated my Airport Express and things gor REALLY wild!
    Now guys...I'M WORKING HERE! My choice for Macintosh was for reliability, and good support. I've been seeing a lot of complains, as the ones with new QuickTime version that needs a third party gyzmo to work.
    Is anybody listening at APPLE???

    Hey, Apple doesn't listen lest you want fork out for an iPod, Iphone, or iTV... we're just Users like you, here only to help!
    The very first thing I'd do is get Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, Reboot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least if it doesn't fix it, it'll eliminate a few questions.
    Besides, once you really, really need it... you can't install it!

  • Network with some comps using ethernet, some airport

    Hello,
    I intend to create a wireless network, possibly with Airport Extreme, in my apartment, for use with my MacBook and MacBook Pro. However I have two desktop comps as well, a PC and a PM G5 without wireless cards. I do not want to buy cards for the desktops because of lack of money and also because the PM G5 is in the basement where the Airport signal would not reach. So, is it in any way possible to have ethernet and airport at my apartment at the same time? Does Airport support that?
    Here is the current (simple) internet setup:
    Internet > DSL Modem > ethernet rooter/hub > ethernet cables > computers
    And also it would be pretty much crucial to share files between the "wirelessed" laptops and the "cabeled" desktops back and forth.
    Thanks for the help.

    So, is it in any way possible to have ethernet and airport at my apartment at the same time? Does Airport support that?
    Yes and yes. That is why the AirPort Extreme base station (AEBS) has LAN Ethernet port (or ports).
    Internet > DSL Modem > ethernet rooter/hub > ethernet cables > computers
    Just replace your "ethernet rooter/hub" with the AEBS.

  • PHD and AirPort

    I have been using Portable Home Directories with 10.5 server since the start of the year, and everything works quite well. Recently we have moved our MacBooks from a wired network to wireless and are using a RADIUS system.
    The portable clients were set up under System Preferences > Network > AirPort > Advanced > 802.1x > + > Login Window Profile to allow authentication to the RADIUS system, and then allow network logon. At the login window clients read "Network Access Requires Logon".
    The PHD clients sync as expected when connected to the wireless network, but now when the wireless network is unavailable (e.g. a user takes their MacBook home) the mobile account is unable to log in to the computer. I have removed the Login Window Profile and the client is working again as the wireless network is stored under the preferred networks and they are prompted to enter their password twice to authenticate to RADIUS.
    I can't understand why it doesn't work in the first instance. This way is a much nicer and simpler way for the user to access the system, and allows other users to logon to the MacBook. Has anybody had experience with this (I hope I have described my problem without too much babble!).

    In 'System Preferences>Network>Network Configuration' uncheck everything except 'Ethernet' and 'Airport'. Then click-and-drag the 'Ethernet' connection to the top of the list above the 'Airport' connection. Configure the 'Ethernet' connection to 'DHCP', then save the changes. Instruct your users to connect their Macbooks at home using a wired connection. When the Macbook starts up, it will check the 'Ethernet' connection first and then the 'Airport' connection and it will use the first connected interface, in this case 'Ethernet', because the preferred wireless network is unavailable. They should not have any issues at login as the PHD stores their log-in info on the client for disconnected operation.

  • Extreme Network Problem - Ethernet versus Airport

    I will try to make this problem/question simple.
    I have a home network with various computers around the house. I have an Ethernet switch in the closet, and various nodes running throughout the house to various rooms.
    Also attached to my switch is a Time Capsule, which is used to create a wireless network and distribute DHCP addresses to other wireless computers in the house.
    I also have an Airport Extreme in my home office that is configured, via Airport Utility, to extend the Time Capsule network, and is on the home network wirelessly. In other words, the Extreme is not hard-wired to the network with an Ethernet cable.
    I have two Ethernet printers connected to the Extreme in my home office (by Ethernet cable), which I wish to use as network printers throughout the house.
    In my home office, my iMac is hard wired to Ethernet, but also has the capability for an airport connection. I prefer, of course, to use the Ethernet, for speed reasons.
    Here is my problem/question: In my home office, I can only print to the two Ethernet printers connected to the Extreme if my iMac is on the home network via its Airport setting (in other words, Airport is above Ethernet in the network connections order). In that case, the printers print fine.
    If, however, I switch the iMac’s network connection to Ethernet (by setting the service order to put Ethernet above Airport), I cannot print to the two Ethernet printers connected to the Extreme - I get caught in the “attempting to connect to host...” mode.
    First question: Why is this? The Ethernet and Airport network settings appear the same, except for the computer’s IP address (i.e., the subnet and router addresses are the same on Ethernet as on Airport). Seems to me that if the printers are on the network, they are on the network.
    Second question: Even if I am on Ethernet (and therefore cannot print to the printers attached to the Extreme), the two printers attached to the Extreme do show up in the Print & Fax window. In other words, I can select them and add them as printers, but I just can’t then print to them.
    What am I missing here? Shouldn’t I be able to print from the iMac when it is on the network via Ethernet? If not, why not?
    I can always, of course (I guess), attach the Extreme to the network via an Ethernet cable from its WAN port to avoid the problem. But that would require running a LONG Ethernet cable, drilling holes in the top of my desk and bottom of a bookcase, etc., and I don’t wish to do that.
    Any help would be appreciated. Thanks..

    Yes, it’s Verizon FiOS coming into the modem, the modem to the switch. Make and model unknown, but don’t see how that would be an issue here.
    I am trying to ascertain, whether or not, your entire network is on the same subnet. If you are using an Ethernet switch and not an Internet router (with a built-in Ethernet switch) directly connected to the modem, then your basic network will not work ... as the modem is only expecting a single device to be connected to it.
    If you had the TC directly connected to the modem, and then, the Ethernet switch connected to one of the TC's LAN ports to provide additional network nodes throughout the house this would be workable.

  • Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
    So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

  • It seems like Ethernet backup and Airport backup goes in different ways

    Since one month a go, I've been having problems with Time Machine backup over Time Capsule.
    When I run Time Machine through Ethernet, there is no problem. Fast and clean. In the Console there is not any error message.
    I unplug ethernet cable, start airport, and in the next copy appears: "Bulk settings atributes failled", several times. Few backups after it will appear problems with a "file path" and few after will appear "deep traversal".
    I plug the Ethernet cable, disconnect airport and I forced to re-index the image bundle. Few backups correct with Ethernet. Unplug ethernet, connect airport, and again the same history.
    It seems like Ethernet backup and Airport backup goes in different ways.
    Permissions are corrected and there is no problems in any disc with First Aid.
    ¿Any idea?. Thanks in advance.

    I am having the same issue.  I have three layered elements as three columns in the body of the page.  When I add the farthest right element it pushes the other left elements to the bottom of the page.  There are aren't any other elements on the page.
    Is this a CSS issue?  I thought about exporting to Dreamweaver and fixing it there but would like to take the easy route first.

Maybe you are looking for