Ethernet and Internet detected, not able to connect to web-browser
I'm working on a 15" powerbook. I just got back to school, and when I plug into the ethernet port,my computer detects that the ethernet is plugged in and that I am connected to the internet. My IP Address is recognized and everything else. My problem is that when I try to open a web browser, it says it can't find the server. The same for when I try to log into AIM. I am connected to the network, as I can see "shard music" in iTunes and everything else. I am connected using DHCP. Anyone know where I should start? The "help-desk" here is of no help.
Could be a DNS error,
enter http://17.254.3.183 into your address bar.
If you get to the apple site, then it is a DNS error.
if not, I'd pull your system config plists and restart.
macHD/library/prefs/system config
Similar Messages
-
I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.
Read http://support.apple.com/kb/ts3367
-
I am not able to restore neither from iTunes nor from iCloud. The proble with iTunes is it says that the backup is corrupted or incompatible. And I am not able to connect to iCloud for restoring. I have IOS 7.0.4 when I have taken the backup.
iCloud does not connect and it says Request Timed out.
Not Sure how to restore my iPad.
Please help!!
Thanksmy problem is with I cloud not iTunes what's up with apple haven't they got the brains to sort out this prob, that they have to let the "community " know instead of helping to fix the problem without having to go through all the hassle of signing in writing a small blog & then leaving it until someone bored with time to write their blog to at some point fix the prob or not ! oh nearly forgot my prob like
HRESULT:0X80070570 no clear explanation as to what this means or why in plain English for the not techno phoebes -
I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..
I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)? -
I just purchased my Mac Book Pro and I need to connect it to my hp officejet 6500 wireless printer, I tried using the CD that came with the printer and it will not connect
Very glad you added that bit of information because I see different problems similar to this. I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
I have apple TV. When I on the bluetooth I am not able to pair my macbook air with my apple tv
Hi drcalista!
I have an article for you here that will help you troubleshoot this issue with AirPlay:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
I have just reset my Iphone 4s. and it is not able to connect to itunes
it says: the Iphone unit could not be activated, the activeting service is not avalible. activate the Iphone via itunes or try again later.
I am not able to do this via itunes. please helpThe servers are getting slammed. Bunch of people trying to download/activate iOS7 at the same time.
There is a good chance activation servers might be down/slow for now. Just keep trying throughout the day. -
dear tech support team please take care about me my 4s not working
Sorry, but we are all users here, just like you, and Apple is not following these discussions.
But here is what you can try in your situation, clicking on the blue links at the end of the post will take you to detailed descriptions to solve your problem.
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone.
If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support -
Not able to connect HTTP web servers outside firewall
Hi
I unable to connect external web server from my java program.
Even I used follwing code to in my java program. I am getting
some problem with encoding the password(base64Encode)
Please anyone can give code to bypass this corporate firewall
from my program(I know the password and user name).
System.getProperties().put( "proxySet", "true" );
System.getProperties().put( "proxyHost", "myProxyMachineName" );
System.getProperties().put( "proxyPort", "85" );
URLConnection connection = url.openConnection();
String password = "username:password";
String encodedPassword = base64Encode( password );
connection.setRequestProperty( "Proxy-Authorization",
encodedPassword );
Avanti
nullCan you post this in the MapViewer forum ?
MapViewer -
BO 4.1 LCM not able to access through Web Browser
Hello Folks,
I installed BO 4.1 in my Vmware workstation 10. successfully. its working fine all tools and web based tools like CMC and BI launch pad.
I have problem while connecting to LCM through below link.
localhost:8080/BOE/LCM
Once i get hit this link on google crome browser I'm getting below error. Please anyone suggest me how to access LCM in my local server.
404 Missing Page
The page you requested is not available on this web server for one of the following reasons:
The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
After verifying that the error is not the result of a bad address or web application problem, perhaps the page you tried to access may no long exist or can not be generated. Report this problem to the webmaster or the administrator.If you are the webmaster or the administrator of this web server, refer to the SAP BusinessObjects FAQ page regarding HTTP errors for more suggestions.
If the problem still persists, please:
Search the SAP BusinessObjects Knowledge Base Articles for similar cases.
Contact with SAP BusinessObjects Customer Support.
Thanks
venkatHello Jawahar,
Thanks for your reply.
Your right from 4.0 its a Promotion Management activity with LCM.
Here my question is I'm not able to Access LCM thorogh Localhost:8080/BOE/LCM.
Please anyone help me how to do rectify this.
Thanks
venkat -
How can I connect to Apple TV wireless with Mac book pro. this laptop doesn't have Air play function. Is any app I can use or new update will help me? I searched in web and found that if I go to system prefrences and click on display I can active Air paly but don't see same page in disply of my version of macbook pro. my device is made late 2011 and it looks it is not an old version.
Please let me know how can I able to air play with my Mac book without useing HDMI cable and using my Aple TV ..
Thank you: Shabnamhttp://support.apple.com/kb/HT5922
If you want to mirror your desktop, see:
http://support.apple.com/kb/HT5404
Regards. -
I am using RHEL 5 and I am not able to connect with network
Hi Friends,
I am using RHEL 5 and unable to connect with network. I have also tried to install RHN setup but I am unable to complete the setup. Since it is trying to connect with RHEL.
#yum install rhn-setup
Please help me to understand the cause of the error, so that it will help me to go for the next step.
Thank You
MuraliMurali wrote:
Hi Friends,
I am using RHEL 5 and unable to connect with network. I have also tried to install RHN setup but I am unable to complete the setup. Since it is trying to connect with RHEL.
#yum install rhn-setup
Please help me to understand the cause of the error, so that it will help me to go for the next step.
Thank You
Murali
Error? I don't see any error.
Process that have errors issue error messages and codes. They do so to assist in solving the error. Why do you not share that information? -
New logic board and now i-tunes music store and i-disk not able to connect
Hi,
My poor MBP died a few weeks ago - the Logic board went and took the Apple RAM with it (the Crucial one stayed fine!). As it's only six months old it has been fixed under warranty. However....
I've just tried to play some purchased music from i-tunes. It says no. It's also unable to connect to the store and attempts to connect or sign-in are refused. (An unknown error 11333). I trashed the old one, preferences and all and installed the lasted 7.4 but the same problem.
I-disk in System Preferences is also refusing to accept my password and connect even though I can go to it it via Go in Finder.
When I type in my password in System Prefences it says "Keychain not found: Keychain "login" cannot be found to store '******'"
I can see something of a pattern here but have no idea how to fix this.
Any help appreciated.Open the Keychain Access in the /Applications/Utilities/ folder and create a new keychain, giving it the name login.
(25187) -
Not able to connect VS Web Developer Express through instant client 10
I just spent 10 hours attempting to connect Web Developer Express 2010 to an Oracle 10g database. In the end the solution was beyond simple, but with the existing threads there is a lot of talking around the problem. I’m posting this in case it might help someone else.
Obtain the Oracle instant client software that will work for your database. You will only need the basic package.
http://www.oracle.com/technetwork/database/features/instant-client/index-100365.html
Extract the contents to a temp location on your hard disk
Create a directory for the application – it could be anything, but here is what I used
C:\instantclient
Copy the extracted files into the directory you just created.
Right click on my computer and choose properties
Under advanced and environment variables you will need to add the directory you created above to the system variables PATH. You will need to create a new system variable called TNS_ADMIN and put the same c:\instantclient path in it.
Create the file tnsnames.ora under the c:\instantclient directory and put your customized entry in it. Below is an example.
tnsnams.ora file contents
<Alias for this tnsnames entry> =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <Your Oracle Server>)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <Your database instance>)
It’s a good idea to restart your system after this installation.
In web developer express use the .NET Framework Data Provider for OLE DB.
Here is the key piece of information!!
Under server name you need to use the alias from the tnsnames.ora file entry. If you do not do this it will not pick up the SERVICE_NAME parm and will give you some goofy error like:
ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor
or
ORA-12514: TNS:listener does not currently know of service requested in connect descriptorI just spent 10 hours attempting to connect Web Developer Express 2010 to an Oracle 10g database. In the end the solution was beyond simple, but with the existing threads there is a lot of talking around the problem. I’m posting this in case it might help someone else.
Obtain the Oracle instant client software that will work for your database. You will only need the basic package.
http://www.oracle.com/technetwork/database/features/instant-client/index-100365.html
Extract the contents to a temp location on your hard disk
Create a directory for the application – it could be anything, but here is what I used
C:\instantclient
Copy the extracted files into the directory you just created.
Right click on my computer and choose properties
Under advanced and environment variables you will need to add the directory you created above to the system variables PATH. You will need to create a new system variable called TNS_ADMIN and put the same c:\instantclient path in it.
Create the file tnsnames.ora under the c:\instantclient directory and put your customized entry in it. Below is an example.
tnsnams.ora file contents
<Alias for this tnsnames entry> =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <Your Oracle Server>)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <Your database instance>)
It’s a good idea to restart your system after this installation.
In web developer express use the .NET Framework Data Provider for OLE DB.
Here is the key piece of information!!
Under server name you need to use the alias from the tnsnames.ora file entry. If you do not do this it will not pick up the SERVICE_NAME parm and will give you some goofy error like:
ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor
or
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor -
WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???
Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?
Maybe you are looking for
-
How do I find classes in a package
Hi, I am working on an automation tool which is to be used for testing public API's in our product. The tool is supposed to work this way: 1. A developer of the API adds a new java file containing the test code for the API in a particular package (wh
-
I have just got apple tv and i cant connected to my macbook pro
how can i connect my macbook pro to my apple tv i can't found the icon to connect with
-
HT1498 I am having trouble renting tonight from Apple TV
I am having trouble renting tonight from Apple TV
-
What is the pinout for the 6602 relative to the 'D' connector.
I am developing a custom board to connect with the PCI-6602 Counter/Timer card. I will use the SH68-68-D1 Shielded Cable, 68-pins, 2 m to connect from the 6602 to the custom board. What I need to know is what is the pinout relative to the 'D' conne
-
[ADF-11.1.2] Link on adf tabel does not select row before navigation
Hi, I have a List of Contries displayed in table with a view button on panel collection toolbar. User Select the country row, which makes changes current row of country View Iterator binding on page, and click on view button, which navigates to detai