EULA question--when I upgraded to CS4, do I still have 2 activations of CS3?
Just wondering what I upgraded to CS4, can I still use CS3 under the EULA? I ask this because I have CS4 on my home computer and laptop. I'd like to use CS3 at work using one of my two activations. By EULA, do I give up my activations of previous versions when I upgrade instead of buying a full version?
Thanks
no. you have 2 activations. period. new versions superceed older versions. you can't legally install cs3 in order to get a "3rd (or 4th) actitivation" once you've installed cs4 as an upgrade to cs3.
you CAN continue to use 3 as a backup and while you get up to speed with cs4, but you're supposed to uninstall it when you become comfortable with the new software.
so what you're asking is technically possible, but it goes against the intent of the EULA.
Similar Messages
-
I used SCCM to deploy Firefox 5.0 to our organization, and when I redeploy firefox 6.0 I still have users complaining that Firefox needs an admin to upgrade even though it is already at 6.0
Absolutely! This post has the best solution by a user named cor-el.
https://support.mozilla.com/en-US/questions/818780#answer-179418 -
Dear Apple support!
My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone 4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the apple id ; I had call my friend to ask about that but it's been a long time he couldn't remember the original ID that he had used. so now, could you be able to unlock the phone that i can continues to use this phone. Thank you so much, and I appreciate you all
<Personal Information Edited by Host>All Apple support contact information is on the web site - http://www.apple.com/contact/
If your friend needs to recover his AppleID used for that iCloud account, then follow the directions here:
http://support.apple.com/kb/HT5787 -
Where can i find the option of, when i close firefox that he saves my current tabs and when i open my firefox i will still have them?
Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs.<br />
You can use "History > Restore Previous Session" to get the previous session at any time.<br />
You may need to click the orange/gray Firefox button to see History.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
* Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
* http://kb.mozillazine.org/Menu_differences
Make sure that you do not use "Clear Recent History" to clear the 'Browsing History' when you close Firefox.
* https://support.mozilla.org/kb/Clear+Recent+History -
Ftp question when trying to connect CS4 manually
HI!
I'm trying to connect CS4 manually (don't have a connection key). After putting in my ftp details, the question comes up "on the FTP server, what folder contains your website?" It then says "Contribute needs to locate your site on the FTP server: example:/users/myfolder/public-html/"
It then tells me that if I don't know, to contact my web administrator. I've done that, and they don't know, and just refer me to the adobe webpage which supposedly will answer the question. It doesn't.
This seems to be an easy one to answer, but I'm totally non-techie, and if my website administrator doesn't know the answer, then I'm stuck. Can anybody help? Thanks!!Thanks, I worked it out in the end; when I changed webhost, the old pw
remained but I hadn't realized because it wasn't clear, and I'm not sure
what I'm doing...
Sarah -
Upgraded to cs4 can I still use cs3 on a different computer
I upgraded to cs4 from cs3. Can I continue to use cs3 on another computer?
You can. But if you cannot have another person using the program at the same time you are using CS4. You can even have CS4 on two computers, as long as it is only one user at a time.
Many people keep both CS3 and CS4 on their computers because they might need to fall back to the older system because of a bug (when the program is new) or because they can do something quicker in the old version, at a later time. -
Upgraded to CS4... Arial now missing in CS3
A few of us in my company are testing Snow Leopard and CS4 before upgrading the entire department. I was blessed with my new machine, programs and OS this Friday, and in the midst of the transition I'm still working in CS3 because of a Tuesday deadline. With multiple people, CS3 users, accessing the same files for various edits and use (i.e. people familiar with these programs and people who are definitely not) we felt it would be easier to begin saving as an InDesign Interchange once the storm blows over. This will allow us proper time to explain to those individuals that the "INX" file is not a corrupt file... it will open just fine in CS3.
My issue involves the fonts we use for these files. When told that until next week we need to do our updates in CS3, feeling there would be no issues, I opened the file in CS3 and was told Arial TTF was missing. Strange, since before I upgraded it was fine. I found that my system had Arial OTF, so I replaced the TTF and saved a version on my desktop. After testing it with a random employee, it showed up as "missing" when she opened the file. Of course, I knew what the outcome would be, but testing it was my first thought.
I understand how to replace missing fonts.. but that's not an option in this case. These particular files, like I said, are used throughout the company. Until we upgrade everyone, continuing to use Arial TTF would be ideal. At the moment, in the midst of our deadline, I'm destined to deal with updating the files with a missing font in CS3 and printing in CS4.
Once we begin saving the "INX" files from CS4, will I be able to use the accepted OTF on my machine, save an Interchange file, and have every TTF user open it on their machines with no problems? Or are our new machines, programs, and OS simply not going to be compatible with TTF --- only OTF? Once everyone has upgraded, using OTF across the board should eliminate any issues, although most outside of the art department will only upgrade to CS4. They will not have their OS upgraded. Until we cross that bridge, can the four of us CS4/Snow Leopard users simply deactivate the OTF and active a TTF? I haven't had time to test at work. Since upgrading late Friday, I have returned home frustrated, trying to figure out a solution before I return this weekend.
The joys of testing... new OS, new CS, new iMac = priceless. Resolving conflicts, not so much.
Any suggestions or insight would be highly appreciated!Jayscee wrote:
I've had the same problem of missing Arial TTF fonts since upgrading to Snow Leopard. I'd always used Arial TTF and still have Arial TTF fonts in the system library and my library font file, but InDesign 4 only finds Arial OTF. If I delete the OTF fonts then it finds the TTF fonts, it just doesn't seem to cope with having the two fonts - it's one or the other.
I find it's a real pain in the arse with old files that used TTF fonts having to be converted and not being able to copy and paste between new and old files. Even using "find font" and "replace with"Arial OTF only replaces the actual characters, there are still spaces left which when typed in results in the Arial ttf font being used which of course then gets highlighted as a missing font not found.
I can't believe that supposed upgrades are so buggy. If anyone nuts out a real fix I'd love to know what it is as swapping fonts from folder to folder has not worked for me.
I feel your pain. I'm beginning to think it's their way of making everyone buy the new product! Ha. -
Typically, when I have upgraded a program, all of the bookmarks, passwords, etc. have transferred to the newest version but, for some reason that did not happen with Firefox 4. I still have all my preferences files as they were moved to the trash. Is there any way I can import them back into the new version of Firefox as it is very frustrating to have lost them.
If you used the option to delete settings, or whatever it is worded when uninstalling, Firefox will remove all your important data information from profiles for all installed versions of Firefox, and you will then need luck and a file recovery utility to try to restore the information.
You mentioned files being moved to Trash, I was hoping you may still have the required original files. I use Windows XP, and I realise Macs use different locations for files, but I think the files have the same names.
See
*[[profiles]]
*http://kb.mozillazine.org/Password_Manager
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Recovering_a_missing_profile
*[[lost bookmarks]]
Note the last article discusses problems when bookmarks are lost, and some of the possible reasons and solutions. Obviously I do not know what has actually happened in your case, and whether or not you used the delete option I initially mentioned. -
Patch for Macromedia Director 6.0 Upgrade for Windows - DOES ANYBODY STILL HAVE IT?
Hello, I am a collector of 1990's multimedia who likes seeking out older, pre-Adobe versions of Director. I have the upgrade version of Director 6.0 for Windows, and it's unfortunately part of an early batch that comes with a corrupted copy of the Projec32.skl stub projector file, rendering 32-bit projectors made with the upgrade version of Director 6 for Windows unusable (only 16-bit projectors will work).
Macromedia released a patch on their old website to address this issue shortly after the release of Director 6 back in 1997, but I can't find it anywhere on the Internet these days. Does anyone still have this patch, and if so, can you share it with me? (FYI, the filename for the patch is "D6wpatch.exe") Or, alternatively, if any of you still have the full, non-upgrade version of Director 6 for Windows, can you share the Projec32.skl with me? (it can be found in Director's installation directory, normally "C:\Program Files\Macromedia\Director 6")
Thanks if you can provide any help,
Ryan
(EDIT 10/26/2012: addendum about alternative sharing method was added to the above text, since Director 6 and prior versions are getting harder and harder to find on eBay these days)
UPDATE 11/23/2012: I finally found the solution... after calling Adobe tech support to no avail (they searched, but didn't find it - they said that all the old Macromedia files got lost after they purchased Macromedia a few years back), I managed to solve the problem myself! I manually extracted the projector stub code from a working 32-bit Director 6 projector executable in a hex editor, and saved that code as a separate projec32.skl file. I replaced the corrupted projector stub, and I proceeded to make a 32-bit projector with a small test movie I made. And guess what - it worked! Thanks, everyone, for viewing this post. I hope that helps!After countless hours of reading I finally discovered what the problem was. I did not read thoroughly through the support documentation which allows a person to update their IPOD video very easily simply follow the directions "and I mean the entire directions" within the following link. I would also strongly suggets following the area which state to d/l Quicktime separately from Itunes. This completely rveresed my problems, and now I have a great functioning IPOD once more.
http://docs.info.apple.com/article.html?artnum=93976 -
Sorry i'm a moron, but i just want to know if i were to upgrade to mountain lion do i need to back-up all of my fles or will it just upgrade and transfer over. when i bought my imac i had it come with apps already installed and i dont want to lose them with an upgrade, but i am SO READY for an upgrade. any help or thoughts would be very appreciated..
You need to do both; the upgrade won't itself delete the files, but problems are likely to occur during it, and drives can fail.
(81236) -
Simple question when I download a app it states I have just 33MB left
This is my first blackberry so be patient I know there is about 90 MB internally on my Blackberry Curve 8330 now I have installed through Blackberry App World 4 apps and I am saying okay where did the 60 or so megs go. Now I know it has came pre-loaded with apps can I just remove some of them.
Sorry for the silly question
Solved!
Go to Solution.Hi and Welcome to the Forums!
There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory
Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option. AppWorld has an option to show you the max and consumed amount of this area.
Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
SD/Media Card Memory -- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
http://www.blackberry.com/btsc/KB05461
On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
http://www.blackberry.com/btsc/KB15345
http://www.blackberry.com/btsc/KB14320
http://www.blackberry.com/btsc/KB14213
Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press the BBKey and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Best!
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Bluetooth not working since I upgraded to iOS 7. Everyone is having this problem. Please fix it.
It should still work but have noticed it takes longer than usual to pair compared to prior version.
http://www.volvocars.com/intl/sales-services/sales/bluetooth/Pages/Bluetooth1.as px -
TS1389 is asking me a security question when i am about to bay put i have forgot the answer
hi can you please restart all of my accunt so i can use it
please
Fatmir
GashiClick here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions.
(100333) -
At one point in time, I believe I had attempted to install bootcamp on my MacBook Pro. My university support center said that I had to press "alt/option" when starting up everytime, otherwise it would be a black windows screen and I had no idea where to go from there. (So I never was able to fully utilize the Bootcamp application. Unfortunately, even after I uninstalled bootcamp, this is still happening. How do I fix this? Thank you.
You should have asked us and looked at 10 posts a week -- same as yours.
OS X: System Preferences: Startup Disk control panel
Set and done!
x = Mac OS X on startup also
And no to needing to hit Option every time. Obviously they never actually booted and used Mac.
All it was is the startup parameter was saved and still set to look for a partition that does not exist and got lost.
ZAP PRAM is also helpful but you would still use Startup Disk.
About This Mac.... More... will also take you to control panels (why System Prefs if they are control panels? to be different?) as well as S.P. from the Dock -
I have a makbook pro, running with Leopard (10.5.8). I know that I missed both Lion and Snow Leopard and want to know the best way to upgrade. Do I need to buy both in addition to Mountain Lion? Will my computer even run Mountain Lion? I need step by step instructions because everyone I talk to just says "Just upgrade it" Thanks.
Upgrading to Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Maybe you are looking for
-
How do I find more info of images in iPhoto 11?
I older versions of iPhoto, as I recall, when an image was open, there was file data including the filename and path for the file that was displayed in the lower left corner of the iPhoto window. Is there any way to get this type of information in iP
-
How to get the full path of a file
If the user selects a file through a browse button, Is there a way, I can get the full path of the file. The file can be from his local hard drive as well.. Can someone advise
-
Only the last call to a method to create a box will translate
I have created a routine to render boxes of various dimensions and positions . However when i run the code only the dimensions and position of the last method call is visible. Can anyone spot where i'm going wrong please? protected Node yourScen
-
IPhone version of Weather Underground
Hopefully this isn't a repeat post, but I couldn't find anything. Anyway, I just found that Weather Underground has made a mobile site specifically for the iPhone. It is similar to their normal mobile site, m.wund.com, but the interface is set up jus
-
Hi I have a query which will read one fact table and 4 dimension table.fact table contains millions of records Can u suggest me how can i tune my query which uses the fact table to get the best performance.