EULA's

Hi Apple,
I have what is probably a stupid question. This relates to I-Tunes, but also to Software Updates in general...
I am very tired of accepting EULA's over and over again. It seems that I accept the agreement 1) when I install apple software, 2) when I accept the upgrade in Software Update and install, and then for a third time... 3) when I reopen the updated software for the first time. I realize there are issues of liability for misuse, but I don't think the constant stops and starts this causes are warranted or increase the rate of compliance to good user practices. If anything this "over-warning" has two definite consequences: bad user experience and EULA fatigue (making the user take each instance less seriously) from over repetition.
I have been an Apple user since 1988. Mac Classic with 20-SC External Hard Drive. Apple, I trust you. Don't you trust me? Adobe trusts me - no excessive EULA's from them, Firefox, Ableton, Microsoft, or the many other software providers out there. This really seems to be an apple-specific issue.
The one thing that get's me most is that with large downloads on my older computer that I use as amedia server (running 10.4.11) I will accept the download for Software Update. The download looks like it begins and I walk away, thinking it will complete on it's own. Nope. Two hours later I see the process is stalled on the EULA dialogue, and the update download really hasn't started yet. In this instance, I'm not sure if it's a system configuration issue or something that could be resolved in Software update itself.
Please, please resolve this issue. I do not want to abuse I-Tunes, nor are redundant agreement check boxes keeping me from doing so if I choose to. Give me the box, let me read, check, and let's move on. This is archaic, and not emblematic of my overall impression of Apple. I know you got sued by ASCAP a few years ago, but let's please move on.
Thank you for your time.
Russell Lord

Ground Level wrote:
Hi Apple,
This is a user forum. If you wish to address Apple, you may use the iTunes Feedback page.

Similar Messages

  • Photoshop elements won't run, eula agreement error

    This week one of our users began experiencing a problem with using Photoshop Elements 5.0.  She knows the application worked fine on her computer a few weeks ago, but when she tried to use the program today she is being asked to accept or decline the user agreement.  Once she clicks "Accept" the program then gives her the error message below:
      "Your Adobe Photoshop Elements EULA agreement has been declined or is invalid.  The application cannot continue and must now exit."
    She clicks "OK" and the program exits.  What has happened?  Do we need to re-install?  We work in an environment where we have no administrative rights on these machines and so we are trying to avoid getting the IT folks to re-install since they could take a couple weeks.  Please help us figure out this problem.
    Thanks!!

    This is a recuring issue for me, most likely caused by a registry cleaner. I can go months - as many as six without that lovely greeting. I have found no other way to correct it other than a reinstallation.

  • Discoverer EUL to OLAP

    Im new to using Discoverer technologies, I would like to ask if it is possible to convert an EUL (End User Layer) to OLAP (Online Analytic Processing) Anaytic Workspace. I would like to create a customized web applications using BI Beans. I already have my Discoverer Business Areas. Can I use these business areas into my BI beans application. I've read that the Discoverer Viewer is made from BI Beans... So Im wondering if it is possible...

    Hi
    Sorry this is not possible. There is no relatioship between an EUL and an analytic workspace. You'll have to do this manually I'm afraid.
    Best wishes
    Michael

  • Discoverer Viewer/Plus does not work with Custom EUL owned by APPS user

    I am facing a unique issue with one of my customers. They have a custom EUL named XX_EUL_US and this does not allow connecting through discoverer viewer or discoverer plus.
    I have worked with custom EULS before at other customers and this was never the case. I am being told that this issue is happening as the EUL owner is APPS instead of some other user. Is this the case? Can discoverer viewer not be used with EULs owned by apps user?
    Please not that the Default EUL in ICX profiles is set to this EUL and no other EUL profiles are set.
    Appreciate any thoughts on this.

    Hi,
    I am not sure what you mean when you say you have a "custom EUL named XX_EUL_US". The EUL table should be created in a schema named XX_EUL_US. This will then be the EUL owner. You will then need to connect to Discoverer Administrator as the EUL owner and grant privileges to Apps users and/or responsibilities.
    The user should then be able to connect to Discoverer Plus/View using their apps username, responsibility and password.
    To be able to connect directly from an apps menu you need to have the ICX parameters set correctly. The ICX: Discoverer Default End User Layer Schema Prefix should be set to XX_EUL (without the _US). The ICX: Discoverer End User Layer Language Override should be set to US or not set at all.
    Rod West

  • Discoverer PLUS EUL not accessible

    Hi guys & girls,
    This is my issue:
    With Discoverer Admin I've created an EUL and a Business Area and I granted the right privilges to a user XXX. When I launch Discoverer Desktop, I connect as user XXX and I can see that I have access to that Business Area. When I launch Discoverer Plus, I create a connection but I do not see the EUL that I've created, so I can not choose it for the connection.
    Anyone an idea?
    Christophe

    I found the problem...
    On my laptop, I have a Discoverer Admin. 10g installation, connected upon a 9i db and created my EUL. Created a Business Area and gave the correct privs/security to my user xxx. When a started Disco Plus and created a private connection, I did not see my EUL appearing in the list of values. Solution: I used a discoverer Admin 9i version, connected upon the 9i db, created the EUL, created a Business Area and gave the correct privs/security to user xxx. Then I reconnected via my Discoverer Admin 10g to that EUL, did the upgrade (forced to do it) and then everything worked out fine. So the trouble is/was, that I was working with two different versions of Discoverer..
    Thanx anyway Rod

  • Discoverer with OWB generated EULs

    i configure my warehouse star schema using OWB (warehouse builder 9i release 2) and generated the EUL. the were some warnings but they were pointing to some invalid characters in the names of the objects but the import succeeded.
    i could see all the imported definition from OWB using Discoverer Admin (also iDS Release 2 - EUL version 5).
    sample of my star schema:-
    fact table
    salesman_id
    product_id
    sales_amt
    dimension
    salesman (which also contains salesman name attribute)
    product (which also contains product description attribute)
    so, i can see the Discoverer joins from the fact to the dimension tables.
    when i create a workbook (report) using Discoverer Desktop, i faced the following problems:-
    if i just have Salesman (ID or Description) as a row, everything is fine.
    if i add in the Product ID, it still works as per normal.
    but when i add Product Description into the report, i experienced a weird behaviour. somehow, the Salesman ID field will be automatically filtered to show only a certain number of records in the result (less than what it initially was) !
    usually if you put field in the Page Items section you will have to select to view <All> records, right ? citing the scenario i just mentioned above, i will only see some record values ... i won't see the <All> displayed for me to choose.
    has this got to do with the foreign key relationship from the Fact table's Product ID field to the Product Dimension table ? it worked for the Salesman dimension !!
    the only thing different about the product dimension is the product id field is VARCHAR2 length 18. you could have numeric values like 000000000012345678 (numbers are padded with zeros to make up 18 chars) and alphanumeric values like MAT_TG12345 (which are not padded with anything - left-justified). i could set that the report would only retrieve the records which has product id matching the numeric values !
    any ideas ?
    thanks to anyone who is kind enough to read this lengthy post and reply it :)

    It would appear that you do not have integrity between the fact and the product dimension.
    Does the foriegn key exisit in the database (deployed) or is it only in the OWB repository (not deployed).
    Two thing:-
    Try changin the join to an outer join.
    Take the sql from the View SQL drop down option and run in another SQL Editor.
    Neil

  • Best choice for exporting / importing EUL

    Hi all
    I have been tasked with migrating an EUL from a R11 to a R12 environment. The Discoverer version on both environments is 10.1.2 and the OS is Solaris on oracle db's.
    I am unfortunately not experienced with Discoverer and there seems to be no one available to assist for various reasons. So I have been reading the manual and forum posts and viewing metalink articles.
    I tried exporting the entire eul via the wizard and then importing it to the new environment but i was not successfull and experienced the system hanging for many hours with a white screen and the log file just ended.
    I assumed this was a memory problem or slow network issues causing this delay. Someone suggested I export import the EUL in pieces and this seemed to be effective but I got missing item warnings when trying to open reports. This piece meal approach also worried me regarding consistency.
    So I decided to try do the full import on the server to try negate the first problem I experienced. Due to the clients security policies I am not able to open the source eul and send it to our dev. I was able to get it from their dev 11 system but I dismissed this as the dev reports were not working and the only reliable eul is the Prod one. I managed to get a prod eex file from a client resource but the upload to my server was extremely slow.
    I asked the dba to assit with the third option of exporting a db dump of the eul_us and importing this into my r12 dev environment. I managed this but had to export the db file using sys which alleviated a priviledge problem when logging in, I have reports that run and my user can see the reports but there are reports that were not shared to sysadmin in the source enviroment are now prefixed with the version 11 user_id in my desktop and the user cannot see her reports only the sysadmin ones.
    I refreshed the BA's using a shell script I made up which uses the java cmd with parameters.
    After some re reading I tried selecting all the options in the validate menu and refreshing in the discover admin tool.
    If I validate and refresh the BA using the admin tool I get the hanging screen and a lot of warnings that items are missing( so much for my java cmd refresh!) and now the report will not open and I see the substitute missing item dialogue boxes.
    My question to the forum is which would be the best approach to migrate the entire eul from a R11 instance to a R12 instance in these circumstances?
    Many thanks
    Regards
    Nick

    Hi Srini
    The os and db details are as follows:
    Source:
    eBus 11.5.2
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,Sun-Fire-V890
    Target:
    ebus 12.1.2
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production DEV12
    SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,Sun-Fire-V890
    Yes the DBA initially did an exp for me using EUL_US as the owner but a strange thing happened with privileges and also, some of the imported tables appeared in the target environment under the apps schema(21 tables) even though the eul_us exp had been 48 tables.
    I also had a problem on the db with "eul_us has insufficient privileges on table space discoverer" type errors.
    I checked the eul_us db privileges and was unable to resolve this initial privilege error even though the privileges were granted to eul_us.
    The dba managed to exp as system and then import it with the full=y flag in the import command which seems to bring in the privileges.
    Then I ran the eul5_id.sql and then made up a list of the business areas and made a sh script to refresh the business areas as follows:
    java -jar eulbuilder.jar -connect sysadmin/oracle1@dev -apps_user -apps_responsibility "System Administrator" -refresh_business_area "ABM Activities" -log refresh.log
    This runs successfully and I can log in select business area and grant access to the users. The reports return data.
    Then one of the users said she can't see all her reports. I noticed some if I opened desktop that were sitting there prefixed with a hash and her version 11 user id.
    So back to the manuals and in the disco admin help the instructions are to first go to view > validate > select all options then go to the business area and click file refresh. This gives me a lot of warnings about items that are missing. I assume this is because the item identifiers brought across in the db dump are the version 11 ones and thus not found in the new system.
    Any suggestions?
    Many thanks
    Nick

  • Can't get past Air EULA for any Air programs

    I have uninstalled and reinstalled Air with no luck.
    Air appears to install, ask to accept the user agreement, then closes the installation.
    Every time I try to run an air application like Twhirl or Prezi, it brings up the EULA again and asks for me to accept it. I do, it then closes, and does not run the program. This was not an issue yesterday and no settings have changed on my computer. I do recall accepting an Air upgrade yesterday or earlier today.
    Here is my log:
    [2010-10-10:00:13:17] Performing runtime install
    [2010-10-10:00:13:18] UI SWF load is complete
    [2010-10-10:00:13:18] UI initialized
    [2010-10-10:00:13:18] starting user confirmation
    [2010-10-10:00:13:18] Version of this installer: 2.0.4.13090
    [2010-10-10:00:13:18] Installation type: new
    [2010-10-10:00:13:21] starting install
    [2010-10-10:00:13:21] Scheduling runtime installation operations
    [2010-10-10:00:13:21] Scheduling an MSI install operation
    [2010-10-10:00:13:21] Beginning runtime installation
    [2010-10-10:00:13:21] Beginning install
    [2010-10-10:00:13:21] Installing c:\docume~1\jlord\locals~1\temp\air37d.tmp\setup.msi
    [2010-10-10:00:13:26] Copying C:\DOCUME~1\jlord\LOCALS~1\Temp\AIR37D.tmp\Adobe AIR\Versions\1.0\Resources\airappinstaller.exe to C:\Documents and Settings\Default User\Application Data\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\airappinstaller.exe
    [2010-10-10:00:13:26] Copying C:\Documents and Settings\Default User\Application Data\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\digest.s to C:\Documents and Settings\jlord\Local Settings\Temp\fla382.tmp\temp
    [2010-10-10:00:13:26] Deleting C:\Documents and Settings\Default User\Application Data\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\digest.s
    [2010-10-10:00:13:26] Copying C:\DOCUME~1\jlord\LOCALS~1\Temp\AIR37D.tmp\Adobe AIR\Versions\1.0\Resources\digest.s to C:\Documents and Settings\Default User\Application Data\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\digest.s
    [2010-10-10:00:13:26] Execution complete; beginning commit phase
    [2010-10-10:00:13:26] Deleting C:\Documents and Settings\jlord\Local Settings\Temp\fla382.tmp\temp
    [2010-10-10:00:13:26] Commit complete
    [2010-10-10:00:13:26] install complete
    [2010-10-10:00:13:44] begin quitting
    [2010-10-10:00:13:46] UI SWF load is complete
    [2010-10-10:00:13:47] UI initialized
    [2010-10-10:00:13:47] Pingback request completed with HTTP status 200
    [2010-10-10:00:13:47] Begin background update check
    [2010-10-10:00:13:47] Starting download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.0.4.13090/update
    [2010-10-10:00:13:47] Background update not available
    [2010-10-10:00:13:47] begin quitting
    [2010-10-10:00:13:56] Starting app install of file:///C:/Documents%20and%20Settings/jlord/My%20Documents/Downloads/twhirl-0.9.4%20(1).a ir
    [2010-10-10:00:13:56] UI SWF load is complete
    [2010-10-10:00:13:57] UI initialized
    [2010-10-10:00:13:57] beginning UI styling
    [2010-10-10:00:13:57] UI styling complete
    [2010-10-10:00:13:57] Unpackaging to C:\Documents and Settings\jlord\Local Settings\Temp\fla387.tmp
    [2010-10-10:00:13:58] unpackaging/validation is complete
    [2010-10-10:00:13:58] application is bound to this version of the runtime
    [2010-10-10:00:13:58] app id de.makesoft.twhirl
    [2010-10-10:00:13:58] pub id 0EA062BC275E7ED1E6EC3762EFFD73C7158ADF33.1
    [2010-10-10:00:13:58] Application not located
    [2010-10-10:00:13:58] Waiting for user confirmation
    [2010-10-10:00:14:07] User confirmed action: install
    [2010-10-10:00:14:07] creating native installer in: C:\Documents and Settings\jlord\Local Settings\Temp\fla388.tmp
    [2010-10-10:00:14:08] native installer creation complete
    [2010-10-10:00:14:08] Starting install
    [2010-10-10:00:14:08] using conversion output in C:\Documents and Settings\jlord\Local Settings\Temp\fla388.tmp
    [2010-10-10:00:14:08] Destination for installed application is C:\Program Files
    [2010-10-10:00:14:08] Beginning install
    [2010-10-10:00:14:08] Installing C:\Documents and Settings\jlord\Local Settings\Temp\fla388.tmp\setup.msi
    [2010-10-10:00:14:10] Execution complete; beginning commit phase
    [2010-10-10:00:14:10] Commit complete
    [2010-10-10:00:14:10] Re-launching application from C:\Program Files\twhirl\twhirl.exe
    [2010-10-10:00:14:10] starting cleanup of temporary files
    [2010-10-10:00:14:10] application installer exiting
    [2010-10-10:00:15:33] Starting update of c:\program files\twhirl\twhirl.exe
    [2010-10-10:00:15:33] Updating from file:///C:/Documents%20and%20Settings/jlord/Application%20Data/de.makesoft.twhirl.0EA062B C275E7ED1E6EC3762EFFD73C7158ADF33.1/Local%20Store/update.air
    [2010-10-10:00:15:33] Updating to version 0.9.5
    [2010-10-10:00:15:34] UI SWF load is complete
    [2010-10-10:00:15:34] UI initialized
    [2010-10-10:00:15:34] beginning UI styling
    [2010-10-10:00:15:34] UI styling complete
    [2010-10-10:00:15:34] Unpackaging to C:\Documents and Settings\jlord\Local Settings\Temp\fla38D.tmp
    [2010-10-10:00:15:35] unpackaging/validation is complete
    [2010-10-10:00:15:35] application is bound to this version of the runtime
    [2010-10-10:00:15:35] app id de.makesoft.twhirl
    [2010-10-10:00:15:35] pub id 0EA062BC275E7ED1E6EC3762EFFD73C7158ADF33.1
    [2010-10-10:00:15:35] Application located at c:\program files
    [2010-10-10:00:15:35] Waiting for user confirmation
    [2010-10-10:00:15:35] User confirmed action: install
    [2010-10-10:00:15:35] creating native installer in: C:\Documents and Settings\jlord\Local Settings\Temp\fla38E.tmp
    [2010-10-10:00:15:35] native installer creation complete
    [2010-10-10:00:15:35] Starting install
    [2010-10-10:00:15:35] using conversion output in C:\Documents and Settings\jlord\Local Settings\Temp\fla38E.tmp
    [2010-10-10:00:15:35] Beginning install
    [2010-10-10:00:15:35] Installing C:\Documents and Settings\jlord\Local Settings\Temp\fla38E.tmp\setup.msi
    [2010-10-10:00:15:39] Execution complete; beginning commit phase
    [2010-10-10:00:15:39] Commit complete
    [2010-10-10:00:15:39] Re-launching application from c:\program files\twhirl\twhirl.exe
    [2010-10-10:00:15:39] starting cleanup of temporary files
    [2010-10-10:00:15:40] application installer exiting
    [2010-10-18:11:17:54] UI SWF load is complete
    [2010-10-18:11:17:55] UI initialized
    [2010-10-18:11:17:55] Begin background update check
    [2010-10-18:11:17:55] Starting download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.0.4.13090/update
    [2010-10-18:11:17:55] Background update not available
    [2010-10-18:11:17:55] begin quitting
    [2011-10-24:11:58:48] Starting app install of http://cdn01.prezi.com/prezi/desktop/PreziDesktop_3.070.air
    [2011-10-24:11:58:48] UI SWF load is complete
    [2011-10-24:11:58:49] UI initialized
    [2011-10-24:11:58:49] beginning UI styling
    [2011-10-24:11:58:49] UI styling complete
    [2011-10-24:11:58:49] Downloading file to C:\Documents and Settings\jlord\Local Settings\Temp\fla68.tmp
    [2011-10-24:11:58:51] Received HTTP Response Status event
    [2011-10-24:11:58:51] Response URL is http://cdn01.prezi.com/prezi/desktop/PreziDesktop_3.070.air
    [2011-10-24:11:59:27] Waiting for user confirmation
    [2011-10-24:11:59:49] User confirmed action: save
    [2011-10-24:11:59:49] Saving file to C:\Documents and Settings\jlord\My Documents\Downloads\PreziDesktop_3.070.air
    [2011-10-24:11:59:49] starting cleanup of temporary files
    [2011-10-24:11:59:49] application installer exiting
    [2011-10-24:12:00:21] Starting app install of http://cdn01.prezi.com/prezi/desktop/PreziDesktop_3.070.air
    [2011-10-24:12:00:21] UI SWF load is complete
    [2011-10-24:12:00:21] UI initialized
    [2011-10-24:12:00:21] beginning UI styling
    [2011-10-24:12:00:21] UI styling complete
    [2011-10-24:12:00:21] Downloading file to C:\Documents and Settings\jlord\Local Settings\Temp\fla69.tmp
    [2011-10-24:12:00:22] Received HTTP Response Status event
    [2011-10-24:12:00:22] Response URL is http://cdn01.prezi.com/prezi/desktop/PreziDesktop_3.070.air
    [2011-10-24:12:00:26] Waiting for user confirmation
    [2011-10-24:12:00:27] User confirmed action: install
    [2011-10-24:12:00:27] beginning UI styling
    [2011-10-24:12:00:28] UI styling complete
    [2011-10-24:12:00:28] Unpackaging to C:\Documents and Settings\jlord\Local Settings\Temp\fla6A.tmp
    [2011-10-24:12:00:34] unpackaging/validation is complete
    [2011-10-24:12:00:34] application is bound to this version of the runtime
    [2011-10-24:12:00:34] app id com.prezi.PreziDesktop
    [2011-10-24:12:00:34] pub id
    [2011-10-24:12:00:34] Application not located
    [2011-10-24:12:00:34] Waiting for user confirmation
    [2011-10-24:12:00:41] User confirmed action: install
    [2011-10-24:12:00:41] creating native installer in: C:\Documents and Settings\jlord\Local Settings\Temp\fla6C.tmp
    [2011-10-24:12:00:46] native installer creation complete
    [2011-10-24:12:00:46] Starting install
    [2011-10-24:12:00:46] using conversion output in C:\Documents and Settings\jlord\Local Settings\Temp\fla6C.tmp
    [2011-10-24:12:00:46] Destination for installed application is C:\Program Files
    [2011-10-24:12:00:46] Beginning install
    [2011-10-24:12:00:46] Installing C:\Documents and Settings\jlord\Local Settings\Temp\fla6C.tmp\setup.msi
    [2011-10-24:12:00:56] Execution complete; beginning commit phase
    [2011-10-24:12:00:56] Commit complete
    [2011-10-24:12:00:56] stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Error #3001" errorID=3001]
    [2011-10-24:12:02:03] starting cleanup of temporary files
    [2011-10-24:12:02:03] application installer exiting
    [2011-10-24:12:03:44] UI SWF load is complete
    [2011-10-24:12:03:44] UI initialized
    [2011-10-24:12:03:45] Pingback request completed with HTTP status 200
    [2011-10-24:12:03:45] Begin background update check
    [2011-10-24:12:03:45] Starting download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.0.4.13090/update
    [2011-10-24:12:04:17] Background update successfully downloaded
    [2011-10-24:12:04:17] User notified of available background update
    [2011-10-24:12:04:45] User deferred installation of background update
    [2011-10-24:12:04:46] begin quitting
    [2011-10-25:15:25:54] UI SWF load is complete
    [2011-10-25:15:25:54] UI initialized
    [2011-10-25:15:25:54] Running C:\Documents and Settings\jlord\Application Data\Adobe\AIR\Updater\Background\updater -update "c:\program files\prezidesktop3\prezidesktop3.exe"
    [2011-10-25:15:25:55] begin quitting
    [2011-10-25:15:26:00] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:26:00] Commandline is: -update "c:\program files\prezidesktop3\prezidesktop3.exe"
    [2011-10-25:15:26:00] Installed runtime (2.0.4.13090) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:26:00] Installed app (com.prezi.PreziDesktop) located at c:\program files\prezidesktop3\prezidesktop3.exe
    [2011-10-25:15:26:09] Starting runtime update. Updating runtime from version 2.0.4.13090 to version 3.0.0.4080
    [2011-10-25:15:26:09] Installing msi at c:\docume~1\jlord\locals~1\temp\air1b7.tmp\setup.msi with guid {ACEB2BAF-96DF-48FD-ADD5-43842D4C443D}
    [2011-10-25:15:26:48] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:26:48] Launching subprocess with commandline c:\program files\prezidesktop3\prezidesktop3.exe
    [2011-10-25:15:26:48] Runtime Installer end with exit code 0
    [2011-10-25:15:26:51] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:26:52] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:26:52] Commandline is: -eula
    [2011-10-25:15:26:52] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:26:52] Starting eula display
    [2011-10-25:15:27:00] Finished eula display
    [2011-10-25:15:27:00] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:27:00] Runtime Installer end with exit code 0
    [2011-10-25:15:27:00] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:27:22] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:27:23] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:27:23] Commandline is: -eula
    [2011-10-25:15:27:23] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:27:23] Starting eula display
    [2011-10-25:15:27:26] Finished eula display
    [2011-10-25:15:27:26] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:27:26] Runtime Installer end with exit code 0
    [2011-10-25:15:27:26] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:27:41] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:27:41] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:27:41] Commandline is: -eula
    [2011-10-25:15:27:41] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:27:42] Starting eula display
    [2011-10-25:15:27:51] Finished eula display
    [2011-10-25:15:27:51] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:27:51] Runtime Installer end with exit code 0
    [2011-10-25:15:27:51] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:36:43] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:36:43] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:36:43] Commandline is: -eula
    [2011-10-25:15:36:43] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:36:44] Starting eula display
    [2011-10-25:15:36:49] Finished eula display
    [2011-10-25:15:36:49] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:36:49] Runtime Installer end with exit code 0
    [2011-10-25:15:36:50] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:39:14] Bootstrapper begin (Win:version 2.0.2.12610)
    [2011-10-25:15:39:14] Installed runtime located (3.0.0.4080)
    [2011-10-25:15:39:14] Launching application installer: "Adobe AIR Application Installer.exe" "C:\DOCUME~1\jlord\LOCALS~1\Temp\AIRB2.tmp\Adobe Support Advisor"
    [2011-10-25:15:39:15] Application Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:39:15] Commandline is: "C:\DOCUME~1\jlord\LOCALS~1\Temp\AIRB2.tmp\Adobe Support Advisor"
    [2011-10-25:15:39:15] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:39:16] Validating app in folder C:\DOCUME~1\jlord\LOCALS~1\Temp\AIRB2.tmp\Adobe Support Advisor
    [2011-10-25:15:39:21] Application signature verified
    [2011-10-25:15:39:21] Unpackaging/validation complete
    [2011-10-25:15:39:21] No app located for appID 'AdobeSupportAdvisor' and pubID 'E7BED6E5DDA59983786DD72EBFA46B1598278E07.1'
    [2011-10-25:15:39:25] Starting app installation to C:\Program Files. Installing app AdobeSupportAdvisor.E7BED6E5DDA59983786DD72EBFA46B1598278E07.1 version 1.6.0.20110628 using the source file at file:///C:/DOCUME~1/jlord/LOCALS~1/Temp/AIRB2.tmp/Adobe%20Support%20Advisor
    [2011-10-25:15:39:25] Installing msi at C:\DOCUME~1\jlord\LOCALS~1\Temp\AIRB2.tmp\Adobe Support Advisor\setup.msi with guid {71B6C9B6-CDF1-516E-EDBD-F3F8EBF7A0C7}
    [2011-10-25:15:39:30] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:39:30] Launching subprocess with commandline C:\Program Files\Adobe Support Advisor\Adobe Support Advisor.exe
    [2011-10-25:15:39:30] Application Installer end with exit code 0
    [2011-10-25:15:39:30] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula -nai
    [2011-10-25:15:39:30] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:39:30] Commandline is: -eula -nai
    [2011-10-25:15:39:30] Application installer success
    [2011-10-25:15:39:30] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:39:31] Starting eula display
    [2011-10-25:15:39:33] Finished eula display
    [2011-10-25:15:39:33] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:39:33] Runtime Installer end with exit code 0
    [2011-10-25:15:39:33] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:39:44] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula -nai
    [2011-10-25:15:39:44] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:39:44] Commandline is: -eula -nai
    [2011-10-25:15:39:44] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:39:45] Starting eula display
    [2011-10-25:15:39:48] Finished eula display
    [2011-10-25:15:39:48] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:39:48] Runtime Installer end with exit code 0
    [2011-10-25:15:39:48] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:40:01] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:40:01] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:40:01] Commandline is: -eula
    [2011-10-25:15:40:01] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:40:02] Starting eula display
    [2011-10-25:15:40:15] Finished eula display
    [2011-10-25:15:40:15] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:40:15] Runtime Installer end with exit code 0
    [2011-10-25:15:40:15] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:42:29] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:42:29] Commandline is:
    [2011-10-25:15:42:29] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:42:33] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
    [2011-10-25:15:42:34] Runtime Installer end with exit code 0
    [2011-10-25:15:42:34] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:42:34] Commandline is: -installupdatecheck
    [2011-10-25:15:42:34] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:42:34] Performing pingback request
    [2011-10-25:15:42:36] Pingback request completed with HTTP status 200
    [2011-10-25:15:42:36] Starting runtime background update check
    [2011-10-25:15:42:36] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/3.0.0.4080/update
    [2011-10-25:15:42:36] Unpackaging http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/3.0.0.4080/update to C:\Documents and Settings\jlord\Application Data\Adobe\AIR\Updater\Background
    [2011-10-25:15:42:36] Runtime update not available
    [2011-10-25:15:42:36] Unpackaging cancelled
    [2011-10-25:15:42:36] Runtime Installer end with exit code 0
    [2011-10-25:15:42:39] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:42:39] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:42:39] Commandline is: -eula
    [2011-10-25:15:42:39] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:42:40] Starting eula display
    [2011-10-25:15:43:37] Finished eula display
    [2011-10-25:15:43:37] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:43:37] Runtime Installer end with exit code 0
    [2011-10-25:15:43:37] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:43:48] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:43:49] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:43:49] Commandline is: -eula
    [2011-10-25:15:43:49] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:43:49] Starting eula display
    [2011-10-25:15:44:36] Finished eula display
    [2011-10-25:15:44:36] Runtime Installer end with exit code 0
    [2011-10-25:15:44:36] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:44:46] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula -nai
    [2011-10-25:15:44:46] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:44:46] Commandline is: -eula -nai
    [2011-10-25:15:44:46] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:44:47] Starting eula display
    [2011-10-25:15:44:49] Finished eula display
    [2011-10-25:15:44:49] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:44:49] Runtime Installer end with exit code 0
    [2011-10-25:15:44:49] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:50:12] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:50:12] Commandline is: -arp:uninstall
    [2011-10-25:15:50:12] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:50:14] Starting runtime uninstall. Uninstalling runtime version 3.0.0.4080
    [2011-10-25:15:50:15] Uninstalling product with GUID {ACEB2BAF-96DF-48FD-ADD5-43842D4C443D}
    [2011-10-25:15:50:27] Runtime Installer end with exit code 0
    [2011-10-25:15:51:08] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:51:08] Commandline is:
    [2011-10-25:15:51:08] No installed runtime detected
    [2011-10-25:15:51:10] Starting runtime install. Installing runtime version 3.0.0.4080
    [2011-10-25:15:51:10] Installing msi at c:\docume~1\jlord\locals~1\temp\air161.tmp\setup.msi with guid {ACEB2BAF-96DF-48FD-ADD5-43842D4C443D}
    [2011-10-25:15:51:20] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:51:20] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
    [2011-10-25:15:51:21] Runtime Installer end with exit code 0
    [2011-10-25:15:51:23] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:51:23] Commandline is: -installupdatecheck
    [2011-10-25:15:51:23] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:51:24] Performing pingback request
    [2011-10-25:15:51:25] Pingback request completed with HTTP status 200
    [2011-10-25:15:51:25] Starting runtime background update check
    [2011-10-25:15:51:25] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/3.0.0.4080/update
    [2011-10-25:15:51:25] Unpackaging http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/3.0.0.4080/update to C:\Documents and Settings\jlord\Application Data\Adobe\AIR\Updater\Background
    [2011-10-25:15:51:26] Runtime update not available
    [2011-10-25:15:51:26] Unpackaging cancelled
    [2011-10-25:15:51:26] Runtime Installer end with exit code 0
    [2011-10-25:15:52:09] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:52:09] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:52:09] Commandline is: -eula
    [2011-10-25:15:52:09] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:52:10] Starting eula display
    [2011-10-25:15:52:13] Finished eula display
    [2011-10-25:15:52:13] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:52:13] Runtime Installer end with exit code 0
    [2011-10-25:15:52:13] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2011-10-25:15:52:37] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2011-10-25:15:52:38] Runtime Installer begin with version 3.0.0.4080 on Windows XP x86
    [2011-10-25:15:52:38] Commandline is: -eula
    [2011-10-25:15:52:38] Installed runtime (3.0.0.4080) located at c:\Program Files\Common Files\Adobe AIR
    [2011-10-25:15:52:38] Starting eula display
    [2011-10-25:15:52:42] Finished eula display
    [2011-10-25:15:52:42] Could not create a file at C:\Documents and Settings\jlord\Application Data\Adobe\AIR\eulaAccepted, ignoring
    [2011-10-25:15:52:42] Runtime Installer end with exit code 0
    [2011-10-25:15:52:42] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)

    TIFFs will hold everything that PSDs do.
    That's nice to hear. However, I found that the Image Processor conversion doesn't work correctly in some cases. Here's one example. I have a file with a single image layer and which is a Smart Object. I applied a Blur Gallery Iris Blur to this object as a Smart Filter. After running the Image Processor what I got was a flattened file with no Smart Object and no blur filter. The filter effect was rasterized so it wasn't lost but the ability to edit further was.
    And it gets worse. I have another file with a single Smart Object layer and a Nik Software Color Efex Pro filter applied. In this case, not only did it flatten the file, it didn't even render the effect correctly.
    I played around with my preferences thinking that my Maximize Compatibility or TIFF layer-save options might be causing the problem. But, so far, I haven't been able to get the Image Processor to work correctly.
    However, if I do the conversion manually I end up with a TIFF file that includes the Smart Object with Smart Filter intact. If I want to use these files with Lightroom I guess I'll have to convert each one manually.

  • Question onTwo EUL in One environment

    Hi Experts .
    We are planning to have Fusion middleware setup for Discoverer . we have two EUL's in two different databses . Please let me know how can i create config the environment to use both the discoverer EUL's. i have created two different repositorys for the two EUL .
    Thanks
    Naga

    Hi Naga
    When you say repository - do you mean infrastructure database containing Single Sign-On? This would make things a lot trickier.
    In the vast majority of cases, you need one RCU per Sarbanes-Oxley instance - typically Production, Test and Development. With different RCUs you will have different Middlewares and therefore the URL you will call for each one will have a different fully qualified domain and port, like this:
    PROD: http://prod_server.mycompany.com:7777/discoverer/plus
    TEST: http://test_server.mycompany.com:7780/discoverer/plus
    DEV: http://dev_server.mycompany.com:7782/discoverer/plus
    These are just given as examples but I hope you get the picture.
    Does this help? Going to bed now so won't be able to look again till the morning - I am in Central time and it is now half past midnight
    Best wishes
    Michael

  • I've installed the latest version of itunes but every time i try to run it i get to the eula and then it won't actually start

    I'm running windows 7 sp1 and every time I try to run windows I can get to the EULA, which I agree to, and then it doesn't do anything. Nothing in task manager or anything.  It used to run, but then it started to give me an error saying that I didn't have proper permission to access the disc it's on, and then I went through a **** of a time getting the program to reinstall, but now it just won't even start at all.  frustrating.

    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    It shouldn't be necessary to reboot the computer to complete an update.<br />
    Download a fresh copy of Firefox ([http://www.mozilla.com/firefox/all.html]) and do a reinstall of Firefox on top of the current version.<br />
    You may need to do a clean install:
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Eulapi error while creating EUL for APPS12

    Dear Guru
    please help to resolve the following error, we need to create the EUL for disoverer 10.1.2.3 integration with APPS12.
    here is the error
    =============================
    $ORACLE_HOME/bin/eulapi \
    -CREATE_EUL \
    -APPS_MODE \
    -CONNECT system/password@PROD \
    -USER EUL_US \
    -PASSWORD eul_us \
    -DEFAULT_TABLESPACE discoverer \
    -TEMPORARY_TABLESPACE temp1 \
    -EUL_LANGUAGE US \
    -APPS_GRANT_DETAILS apps/apps \
    -log log_eul_create.log-create_eul
    -apps_mode
    -connect <**********>
    -user EUL_US
    -password eul_us
    -default_tablespace discoverer
    -temporary_tablespace temp1
    -eul_language US
    -apps_grant_details apps/apps
    -log log_eul_create.log
    OCIError
    OCIError
    Database Error - ORA-30041: Cannot grant quota on the tablespace
    ==============
    thanks in advance
    cheers
    Edited by: user11970641 on 18-Feb-2010 03:53

    We applied the following patch on 10.1.2.3 discoverer home, following patches were applied with "opatch"
    1- 4398431
    2- 8746296
    and created the eul with the following command and it was successfull.
    [oradisc@oraclehost bin]$ $ORACLE_HOME/bin/eulapi \
    -CREATE_EUL \
    -APPS_MODE \
    -CONNECT SYSTEM/password@PROD \
    -USER EUL_US \
    -PASSWORD EUL_US \
    -DEFAULT_TABLESPACE DISCOVERER \
    -TEMPORARY_TABLESPACE TEMP1 \
    -EUL_LANGUAGE US \
    -APPS_GRANT_DETAILS apps/apps \
    -log log_eul_create_1.log-create_eul
    -apps_mode
    -connect <**********>
    -user EUL_US
    -password EUL_US
    -default_tablespace DISCOVERER
    -temporary_tablespace TEMP1
    -eul_language US
    -apps_grant_details apps/apps
    -log log_eul_create_1.log
    Command completed.

  • ORA-00001 - unique constraint violation when upgrading 10g EUL

    Hi,
    I am trying to upgrade my Discoverer 4i to Discoverer 10g.
    When I log into 10g, it prompts me to upgrade the EUL. After making the right back up of my 4i EUL, I continue with the upgrade.
    During the upgrade, I am hit with this error:
    Database error: ORA-00001 unique constraint (EUL_HRMS.EUL5_FOL_UK_1) violated.
    I understand that this happens when user tries to insert an already existing value into a column defined as unique. However, I am not sure on how to resolve it.
    Can anyone please advice.
    Thanks in advance!
    Regards,
    Harpreet Sidhu

    Hi Rod,
    I've run the queries and these are the results. Each query returned one row.
    1. SELECT FROM EUL_HRMS.EUL5_DOC_FOLDERS*
    FOL_ID     100057
    FOL_NAME     ROOT
    FOL_DEVELOPER_KEY     ROOT
    FOL_DESCRIPTION     
    FOL_EU_ID     100000
    FOL_PARENT_ID     
    FOL_USER_PROP2     
    FOL_USER_PROP1     
    FOL_ELEMENT_STATE     0
    FOL_CREATED_BY     EUL_HRMS
    FOL_CREATED_DATE     19-Jun-09
    FOL_UPDATED_BY     EUL_HRMS
    FOL_UPDATED_DATE     19-Jun-09
    NOTM     0
    2. SELECT EU_ID, EU_SECURITY_MODEL, EU_USE_PUB_PRIVS, EU_ROLE_FLAG
    FROM EUL_HRMS.EUL5_EUL_USERS
    WHERE EU_USERNAME = 'PUBLIC'
    EU_ID     3000
    EU_SECURITY_MODEL     0
    EU_USE_PUB_PRIVS     1
    EU_ROLE_FLAG     0
    Thanks!

  • Getting error while trying to refresh EUL using adrfseul.sh

    I am getting the following error while trying to refresh EUL. I am using Discoverer
    10.2.0.2 with Oracle Applications 11.5.10.2 and following note id 313418.1 of metalink.
    You are running adrfseul, version 115.0
    Start of adrfseul session
    Date/time is Thu Feb 22 13:06:56 AST 2007
    Log file is refresh_eul_us_vis.log
    Command line arguments are
         "connect=sysadmin/sysadmin@vis"
         "resp=System Administrator"
         "gwyuid=APPLSYSPUB/PUB"
         "fndnam=APPS"
         "secgroup=Standard"
         "eulschema=EUL_US"
         "eulpassword=EUL_US"
         "twotask=VIS"
         "iashome=/oracle/BIHome_2"
         "logfile=refresh_eul_us_vis.log"
         "exedir=/oracle/BIToolsHome_1/bin"
    Testing connection to database using plus80 -s ...
    plus80: adrfseul.sh 612: not found
    Connection to database using plus80 -s is OK ...
    Extracting eul folder information ...
    plus80: adrfseul.sh 612: not found
    Unable to obtain folder information.
    The SQLPLUS session exited with status 127
    adrfseul is exiting with status 1
    End of adrfseul session
    Date/time is Thu Feb 22 13:06:56 AST 2007
    Anyone knows please help me to resolve this issue. Thanks in advance.
    Regards
    Muhammad Ali

    EUL_US is an Apps mode EUL and SYSADMIN user is the owner of all EUL content in Oracle Applications environments. The unix/linux bi tools can upgrade the EUL via
    $ORACLE_HOME/bin/eulapi -CONNECT eul_us/eul_us@vis -AUTO_UPGRADE
    Use the Windows bi tools to update and refresh EUL content or look at the following note:
    5712119 / 5258810 : Adrfseul.Sh Errors On New Installation Of Disco 10.1.2 & 11i
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404398.1

  • Can't update AIR, asks EULA forever.

    Can't update AIR. I'm using htc sync and each time I try to update AIR aks to accpet EULA. There is a problem in the Windows log . As my W7 is in spanish the message is in spanish.
    I also attach the last lines of the air log.
    [2013-01-08:18:14:32] begin quitting
    [2013-01-08:18:14:38] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:14:38] Commandline is: -update "c:\program files\htc\htc sync 3.0\ui\htc.exe"
    [2013-01-08:18:14:38] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:14:38] Installed app (HTC.388BC06ACDAB6261375BCE37FBA2E023C0D7EE34.1) located at c:\program files\htc\htc sync 3.0\ui\htc.exe
    [2013-01-08:18:17:47] Relaunching with elevation
    [2013-01-08:18:17:47] Launching subprocess with commandline c:\users\pablo\appdata\local\temp\aire5ce.tmp\adobe air installer.exe -ei
    [2013-01-08:18:17:47] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:17:47] Commandline is: -stdio \\.\pipe\AIR_7728_0 -ei
    [2013-01-08:18:17:47] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:17:48] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
    [2013-01-08:18:17:48] Installing msi at c:\users\pablo\appdata\local\temp\aire5ce.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2013-01-08:18:17:51] Runtime Installer end with exit code 0
    [2013-01-08:18:17:51] Elevated install completed
    [2013-01-08:18:17:53] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:17:54] Launching subprocess with commandline c:\program files\htc\htc sync 3.0\ui\htc.exe
    [2013-01-08:18:17:54] Runtime Installer end with exit code 0
    [2013-01-08:18:17:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:18:17:55] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:17:55] Commandline is: -eula
    [2013-01-08:18:17:55] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:17:56] Starting eula display
    [2013-01-08:18:18:13] Finished eula display
    [2013-01-08:18:18:13] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:18:13] Runtime Installer end with exit code 0
    [2013-01-08:18:18:13] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:18:18:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:18:18:54] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:18:54] Commandline is: -eula
    [2013-01-08:18:18:54] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:18:55] Starting eula display
    [2013-01-08:18:18:59] Finished eula display
    [2013-01-08:18:18:59] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:18:59] Runtime Installer end with exit code 0
    [2013-01-08:18:18:59] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:18:19:16] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:18:19:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:19:16] Commandline is: -eula
    [2013-01-08:18:19:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:19:17] Starting eula display
    [2013-01-08:18:19:40] Finished eula display
    [2013-01-08:18:19:40] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:19:40] Runtime Installer end with exit code 0
    [2013-01-08:18:19:40] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:18:43:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:43:16] Commandline is: -arp:uninstall
    [2013-01-08:18:43:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:43:18] Relaunching with elevation
    [2013-01-08:18:43:18] Launching subprocess with commandline c:\program files\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
    [2013-01-08:18:43:18] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:43:18] Commandline is: -stdio \\.\pipe\AIR_4184_0 -eu
    [2013-01-08:18:43:18] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:43:18] Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
    [2013-01-08:18:43:19] Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2013-01-08:18:43:22] Runtime Installer end with exit code 0
    [2013-01-08:18:43:22] Elevated install completed
    [2013-01-08:18:43:22] Runtime Installer end with exit code 0
    [2013-01-08:18:51:57] performing a silent runtime install
    [2013-01-08:18:51:58] UI SWF load is complete
    [2013-01-08:18:51:58] starting install
    [2013-01-08:18:51:58] Scheduling runtime installation operations
    [2013-01-08:18:51:58] Scheduling an MSI install operation
    [2013-01-08:18:51:58] Beginning runtime installation
    [2013-01-08:18:51:58] Beginning install
    [2013-01-08:18:51:58] Installing c:\users\pablo\appdata\local\temp\air147c.tmp\setup.msi
    [2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\airappinstaller.exe to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\airappinstaller.exe
    [2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\digest.s to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\digest.s
    [2013-01-08:18:52:01] Execution complete; beginning commit phase
    [2013-01-08:18:52:01] Commit complete
    [2013-01-08:18:52:01] install complete
    [2013-01-08:18:52:01] begin quitting
    [2013-01-08:18:56:39] UI SWF load is complete
    [2013-01-08:18:56:40] UI initialized
    [2013-01-08:18:56:44] Pingback request completed with HTTP status 200
    [2013-01-08:18:56:44] Begin background update check
    [2013-01-08:18:56:44] Starting download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.0.3.13070/update
    [2013-01-08:18:56:45] Background update successfully downloaded
    [2013-01-08:18:56:46] User notified of available background update
    [2013-01-08:18:56:46] runtime install entering error state: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: can't access property in unloaded application" errorID=0]
    [2013-01-08:18:57:06] begin quitting
    [2013-01-08:18:57:36] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:57:36] Commandline is: -silent
    [2013-01-08:18:57:36] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:57:36] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
    [2013-01-08:18:57:37] Installing msi at c:\users\pablo\appdata\local\temp\air400e.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2013-01-08:18:57:42] Runtime Installer end with exit code 1
    [2013-01-08:19:07:11] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:19:07:12] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:19:07:12] Commandline is: -eula
    [2013-01-08:19:07:12] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:19:07:14] Starting eula display
    [2013-01-08:19:07:49] Finished eula display
    [2013-01-08:19:07:49] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:19:07:49] Runtime Installer end with exit code 0
    [2013-01-08:19:07:49] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:19:08:20] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:19:08:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:19:08:20] Commandline is: -eula
    [2013-01-08:19:08:20] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:19:08:21] Starting eula display
    [2013-01-08:19:08:50] Finished eula display
    [2013-01-08:19:08:50] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:19:08:50] Runtime Installer end with exit code 0
    [2013-01-08:19:08:50] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:19:09:05] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:19:09:05] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:19:09:05] Commandline is: -eula
    [2013-01-08:19:09:05] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:19:09:06] Starting eula display
    [2013-01-08:19:09:31] Finished eula display
    [2013-01-08:19:09:31] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:19:09:31] Runtime Installer end with exit code 0
    [2013-01-08:19:09:31] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-09:00:25:22] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-09:00:25:22] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-09:00:25:22] Commandline is: -eula
    [2013-01-09:00:25:22] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-09:00:25:23] Starting eula display
    [2013-01-09:00:25:27] Finished eula display
    [2013-01-09:00:25:27] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-09:00:25:27] Runtime Installer end with exit code 0
    [2013-01-09:00:25:27] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)

    Can't update AIR. I'm using htc sync and each time I try to update AIR aks to accpet EULA. There is a problem in the Windows log . As my W7 is in spanish the message is in spanish.
    I also attach the last lines of the air log.
    [2013-01-08:18:14:32] begin quitting
    [2013-01-08:18:14:38] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:14:38] Commandline is: -update "c:\program files\htc\htc sync 3.0\ui\htc.exe"
    [2013-01-08:18:14:38] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:14:38] Installed app (HTC.388BC06ACDAB6261375BCE37FBA2E023C0D7EE34.1) located at c:\program files\htc\htc sync 3.0\ui\htc.exe
    [2013-01-08:18:17:47] Relaunching with elevation
    [2013-01-08:18:17:47] Launching subprocess with commandline c:\users\pablo\appdata\local\temp\aire5ce.tmp\adobe air installer.exe -ei
    [2013-01-08:18:17:47] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:17:47] Commandline is: -stdio \\.\pipe\AIR_7728_0 -ei
    [2013-01-08:18:17:47] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:17:48] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
    [2013-01-08:18:17:48] Installing msi at c:\users\pablo\appdata\local\temp\aire5ce.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2013-01-08:18:17:51] Runtime Installer end with exit code 0
    [2013-01-08:18:17:51] Elevated install completed
    [2013-01-08:18:17:53] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:17:54] Launching subprocess with commandline c:\program files\htc\htc sync 3.0\ui\htc.exe
    [2013-01-08:18:17:54] Runtime Installer end with exit code 0
    [2013-01-08:18:17:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:18:17:55] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:17:55] Commandline is: -eula
    [2013-01-08:18:17:55] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:17:56] Starting eula display
    [2013-01-08:18:18:13] Finished eula display
    [2013-01-08:18:18:13] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:18:13] Runtime Installer end with exit code 0
    [2013-01-08:18:18:13] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:18:18:54] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:18:18:54] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:18:54] Commandline is: -eula
    [2013-01-08:18:18:54] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:18:55] Starting eula display
    [2013-01-08:18:18:59] Finished eula display
    [2013-01-08:18:18:59] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:18:59] Runtime Installer end with exit code 0
    [2013-01-08:18:18:59] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:18:19:16] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:18:19:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:19:16] Commandline is: -eula
    [2013-01-08:18:19:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:19:17] Starting eula display
    [2013-01-08:18:19:40] Finished eula display
    [2013-01-08:18:19:40] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:18:19:40] Runtime Installer end with exit code 0
    [2013-01-08:18:19:40] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:18:43:16] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:43:16] Commandline is: -arp:uninstall
    [2013-01-08:18:43:16] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:43:18] Relaunching with elevation
    [2013-01-08:18:43:18] Launching subprocess with commandline c:\program files\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
    [2013-01-08:18:43:18] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:43:18] Commandline is: -stdio \\.\pipe\AIR_4184_0 -eu
    [2013-01-08:18:43:18] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:43:18] Starting runtime uninstall. Uninstalling runtime version 3.2.0.2070
    [2013-01-08:18:43:19] Uninstalling product with GUID {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2013-01-08:18:43:22] Runtime Installer end with exit code 0
    [2013-01-08:18:43:22] Elevated install completed
    [2013-01-08:18:43:22] Runtime Installer end with exit code 0
    [2013-01-08:18:51:57] performing a silent runtime install
    [2013-01-08:18:51:58] UI SWF load is complete
    [2013-01-08:18:51:58] starting install
    [2013-01-08:18:51:58] Scheduling runtime installation operations
    [2013-01-08:18:51:58] Scheduling an MSI install operation
    [2013-01-08:18:51:58] Beginning runtime installation
    [2013-01-08:18:51:58] Beginning install
    [2013-01-08:18:51:58] Installing c:\users\pablo\appdata\local\temp\air147c.tmp\setup.msi
    [2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\airappinstaller.exe to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\airappinstaller.exe
    [2013-01-08:18:52:01] Copying C:\Users\Pablo\AppData\Local\Temp\AIR147C.tmp\Adobe AIR\Versions\1.0\Resources\digest.s to C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com\bin\airappinstaller\digest.s
    [2013-01-08:18:52:01] Execution complete; beginning commit phase
    [2013-01-08:18:52:01] Commit complete
    [2013-01-08:18:52:01] install complete
    [2013-01-08:18:52:01] begin quitting
    [2013-01-08:18:56:39] UI SWF load is complete
    [2013-01-08:18:56:40] UI initialized
    [2013-01-08:18:56:44] Pingback request completed with HTTP status 200
    [2013-01-08:18:56:44] Begin background update check
    [2013-01-08:18:56:44] Starting download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/2.0.3.13070/update
    [2013-01-08:18:56:45] Background update successfully downloaded
    [2013-01-08:18:56:46] User notified of available background update
    [2013-01-08:18:56:46] runtime install entering error state: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: can't access property in unloaded application" errorID=0]
    [2013-01-08:18:57:06] begin quitting
    [2013-01-08:18:57:36] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:18:57:36] Commandline is: -silent
    [2013-01-08:18:57:36] Installed runtime (2.0.3.13070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:18:57:36] Starting silent runtime update. Updating runtime from version 2.0.3.13070 to version 3.2.0.2070
    [2013-01-08:18:57:37] Installing msi at c:\users\pablo\appdata\local\temp\air400e.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
    [2013-01-08:18:57:42] Runtime Installer end with exit code 1
    [2013-01-08:19:07:11] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:19:07:12] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:19:07:12] Commandline is: -eula
    [2013-01-08:19:07:12] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:19:07:14] Starting eula display
    [2013-01-08:19:07:49] Finished eula display
    [2013-01-08:19:07:49] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:19:07:49] Runtime Installer end with exit code 0
    [2013-01-08:19:07:49] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:19:08:20] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:19:08:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:19:08:20] Commandline is: -eula
    [2013-01-08:19:08:20] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:19:08:21] Starting eula display
    [2013-01-08:19:08:50] Finished eula display
    [2013-01-08:19:08:50] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:19:08:50] Runtime Installer end with exit code 0
    [2013-01-08:19:08:50] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-08:19:09:05] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-08:19:09:05] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-08:19:09:05] Commandline is: -eula
    [2013-01-08:19:09:05] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-08:19:09:06] Starting eula display
    [2013-01-08:19:09:31] Finished eula display
    [2013-01-08:19:09:31] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-08:19:09:31] Runtime Installer end with exit code 0
    [2013-01-08:19:09:31] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)
    [2013-01-09:00:25:22] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -eula
    [2013-01-09:00:25:22] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
    [2013-01-09:00:25:22] Commandline is: -eula
    [2013-01-09:00:25:22] Installed runtime (3.2.0.2070) located at c:\Program Files\Common Files\Adobe AIR
    [2013-01-09:00:25:23] Starting eula display
    [2013-01-09:00:25:27] Finished eula display
    [2013-01-09:00:25:27] Could not create a file at C:\Users\Pablo\AppData\Roaming\Adobe\AIR\eulaAccepted, ignoring
    [2013-01-09:00:25:27] Runtime Installer end with exit code 0
    [2013-01-09:00:25:27] Subprocess c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater failed (1)

  • Creation of a new EUL in APPS mode

    I need to create a new EUL in APPS mode, so, I'm following some steps from http://learndiscoverer.blogspot.com/2009/03/clamping-down-discoverer.html, in order to do everything right from the beginning.
    I'm thinking in create new tablespaces (for EUL data and summaries, and temp), new database user CUST_BI with these tablespaces, and then create the new EUL. I'm following the Metalink note 373634.1, but I'am in doubt if the bold parts are OK:
    $ORACLE_HOME/bin/eulapi -CREATE_EUL -APPS_MODE -CONNECT system/<password>@<db> -USER CUST_BI -PASSWORD <password> -DEFAULT_TABLESPACE disco_tbsp -TEMPORARY_TABLESPACE disco_temp -EUL_LANGUAGE US -APPS_GRANT_DETAILS apps/<password> -log EULcreation.log
    $ORACLE_HOME/bin/eulapi -CONNECT CUST_BI/<password>@<db> -GRANT_PRIVILEGE -USER DISCOADMIN -PRIVILEGE administration -PRIVILEGE all_admin_privs -LOG grantEULAdminPriv.log
    1) Is the CUST_BI database user in the right place ?
    2) As you can see, I need to separate the BI administration from EBS administration... and DISCOADMIN is a new Apps user... any checklist/recommendation for this new Apps. user?
    Thanks in advance
    Alfonso

    Hi,
    1) Is the CUST_BI database user in the right place ?Yes, though you should add the language code to the user name, e.g. CUST_BI_US. This will be the EUL owner, the schema that holds all the EUL tables. The temporary tablespace you specify in the create_eul command is only used when you connect as the EUL owner, so is not important.
    When you connect as an apps user the connection will be made using the APPS database user, and therefore the temporary tablespace used (and location of MVs) will be the temporary and default tablespaces associated with the APPS user. You can change the temporary tablespace just for the Discoverer users by issuing a ALTER SESSION SET CURRENT_SCHEMA command in a PL/SQL procedure called during the initialisation of the Discoverer sessions.
    2) As you can see, I need to separate the BI administration from EBS administration... and DISCOADMIN is a new Apps user... any checklist/recommendation for this new Apps. user? The disco administration user can be any apps user who has EUL administration privileges in the EUL. This user should then be used to create all business areas, etc.
    Rod West

  • Font licensing and EULA: Adobe Type Basics OpenType Edition

    Hi all,
    I'm not necesarilly working with graphic design daily. However, I may have to replicate a design for a publication that uses Adobe Garamond Pro, which is why I got interested in Adobe - Fonts : Adobe Type Basics OpenType Edition.
    However, before I shell out the cash, I'd like to ask a few questions about related EULA's and font licensing issues - as the last thing I want to do is buy something, and then end up sued/financially destroyed/imprisoned anyways. (which is why I prefer with open fonts & software - at least no worries about prison, in case of misunderstanding the legalese)
    So, here are the questions:
    I am a Linux user, and I primarily intent to use the fonts with xelatex. On the download page, there are two options: "Win" and "Mac". Which one should I choose? Related question: Adobe Forums: Install a Mac font on a PC:Windows can use OpenType, Windows Type1 and Windows TrueType fonts. Windows cannot directly read Mac TrueType or Mac Type1 fonts.
    Macintosh can use OpenType, Mac Type1, Mac TrueType, and Win TrueType. Adobe products can read some Windows Type 1 fonts if installed in the correct folder.
    Versions - possibly unrelated, but I've found this old comment from 2003 for 'Adobe Type Basics 5.0 Mlp (CD-ROM)':Unfortunately, this product includes fonts in the older PostScript "Type 1" font format instead of the newer OpenType format. Adobe sells an OpenType edition of Adobe Type Basics, but this is a download-only product. I wish Adobe would sell the OpenType Edition on CD.... so just to make sure: I would definitely download the OpenType if I buy from the above  Adobe - Fonts : Adobe Type Basics OpenType Edition link, right?
    Re-download - the Adobe Type Basics page doesn't mention the file format of the download, nor its size. With bought fonts, I'd consider installing whatever I need for as long as project lasts, then deleting everything from my computer, since I don't like proprietary stuff sitting on it. Thus, I'd be interested in re-donwloading the Adobe Type Basics package. So is this package a zip file or similar, if so - how big is it? Can I download the file multiple times after purchase? Is the number of times I can redownload limited?
    I may have to do (in a role of page layouter for an academic institution) a document for a relatively big academic publisher (Springer); and I have little idea about how font licensing works there. Let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the publisher for printing, if I had purchased the Basics OpenType edition? I'm worried because I found in Adobe Forums: Install a Mac font on a PC:As I understand it, print service providers are required by the font EULA to own the font even though the customer provides it.
    I suggest you ask your customer to purchase the modern OpenType versions of the fonts. ... but then, Springer are "publishers", not "printers"? How worried should I be about this? Should I ask for confirmation in writing from them, that they own the particular embedded font? Then again, since in this case I'd be working for an academic institution as page layouter, should the academic institution also buy the font? If the academic institution already owns the font, am I legally obliged to own it as a page layouter (even if I'd use that font on the institutions computers with licensed fonts on them)? I'm pretty sure I'd be legally obliged to own it if I intend to prepare the layout on my own computer, is that correct?
    The download page mentions for "End User License": 5 computers. Say I install one Adobe Garamond Pro on one computer, use it there for the duration of a project, and then delete it from the computer. Is this computer then still counted towards the number of seats?
    Occasionally, I have my personal notes and such typeset in Latex, and here I send them to a printer (as in, "print service provider") to print 2-3 copies in softcover for personal use. As far as I understand it, this does not represent a "published" book (and so there isn't a "publisher" institution as in the Springer example above). So, in this case, again the same situation: let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the print house for printing, if I had purchased the Basics OpenType edition? How worried should I be about this?
    Other neat related links I found:
    Adobe Forums: Font EULA Question Re: Selling Logos;  
    Adobe Forums: font liscensing: upgrading from print to digital ...
    Well, I believe this is all I have for asking (for now) - thanks in advance for any answers!

    I am a Linux user, and I primarily intent to use the fonts with xelatex. On the download page, there are two options: "Win" and "Mac". Which one should I choose?
    Related question: Adobe Forums: Install a Mac font on a PC:Windows can use OpenType, Windows Type1 and Windows TrueType fonts. Windows cannot directly read Mac TrueType or Mac Type1 fonts.
    Macintosh can use OpenType, Mac Type1, Mac TrueType, and Win TrueType. Adobe products can read some Windows Type 1 fonts if installed in the correct folder.
    If you want Adobe Type Basics OpenType edition, then the fonts support multiple platforms.  OpenType fonts work on Mac, Win and Linux systems.
    Versions - possibly unrelated, but I've found this old comment from 2003 for 'Adobe Type Basics 5.0 Mlp (CD-ROM)':Unfortunately, this product includes fonts in the older PostScript "Type 1" font format instead of the newer OpenType format. Adobe sells an OpenType edition of Adobe Type Basics, but this is a download-only product. I wish Adobe would sell the OpenType Edition on CD.... so just to make sure: I would definitely download the OpenType if I buy from the above  Adobe - Fonts : Adobe Type Basics OpenType Edition link, right?
    Yes, the Adobe Type Basics Open Type Edition would provide you with OpenType versions of the fonts.  Sorry that we don’t offer all the different fonts, font families and variations on CD-ROM, but it would be cost-prohibitive to make all those versions, and font software is relatively small compared to application software.  That said, Our font EULA (End User License Agreement) which can be found at: http://www.adobe.com/type/browser/legal/pdfs/wf_EULA071111/EULA5seat_USEnglish07.11.11.htm l states: “2.5 Backup Copy. You may make a reasonable number of backup copies of the Software, provided your backup copies are not installed or used for other than archival purposes.” So you can make your own CD-ROM.
    Re-download - the Adobe Type Basics page doesn't mention the file format of the download, nor its size. With bought fonts, I'd consider installing whatever I need for as long as project lasts, then deleting everything from my computer, since I don't like proprietary stuff sitting on it. Thus, I'd be interested in re-donwloading the Adobe Type Basics package. So is this package a zip file or similar, if so - how big is it? Can I download the file multiple times after purchase? Is the number of times I can redownload limited?
    The file format is OpenType (CFF).  I would recommend making a backup copy of these fonts if you don’t want to keep them on your system.  Our Electronic Software Download service is not meant to be used for storage.
    I may have to do (in a role of page layouter for an academic institution) a document for a relatively big academic publisher (Springer); and I have little idea about how font licensing works there. Let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the publisher for printing, if I had purchased the Basics OpenType edition? I'm worried because I found in Adobe Forums: Install a Mac font on a PC:As I understand it, print service providers are required by the font EULA to own the font even though the customer provides it.
    I suggest you ask your customer to purchase the modern OpenType versions of the fonts. ... but then, Springer are "publishers", not "printers"? How worried should I be about this? Should I ask for confirmation in writing from them, that they own the particular embedded font? Then again, since in this case I'd be working for an academic institution as page layouter, should the academic institution also buy the font? If the academic institution already owns the font, am I legally obliged to own it as a page layouter (even if I'd use that font on the institutions computers with licensed fonts on them)? I'm pretty sure I'd be legally obliged to own it if I intend to prepare the layout on my own computer, is that correct?
    Wow!  Lots of questions here.  First of all, publishers publish.  Printing is just one form of publishing.  Embedding information for Adobe fonts can be found at the following:
    http://www.adobe.com/type/browser/legal/additional_licenses.html
    http://www.adobe.com/type/browser/info/embedding.html
    If you send a file to a print service provider and send a copy of the font along as well, then the printer needs to own a valid copy themselves.  If you send the print service provider a PDF version of the file, then you can embed the font in the PDF (but you would not send the a raw version of the font).  In this case, the printer doesn’t need the font, because it is embedded in the document.
    The download page mentions for "End User License": 5 computers. Say I install one Adobe Garamond Pro on one computer, use it there for the duration of a project, and then delete it from the computer. Is this computer then still counted towards the number of seats?
    If you buy a license for Adobe Garamond Pro, you have up to 5 seats.  So, it can be installed on a maximum of five computers at your company.  It is that simple to be in compliance.  If you were to obtain Adobe Garamond  Pro by purchasing Adobe Type Basics OpenType Edition, then you can install the entire set on up to five computers at your company.  You are licensing the set, and the fonts cannot be split up and used across multiple users at your company.
    Occasionally, I have my personal notes and such typeset in Latex, and here I send them to a printer (as in, "print service provider") to print 2-3 copies in softcover for personal use. As far as I understand it, this does not represent a "published" book (and so there isn't a "publisher" institution as in the Springer example above). So, in this case, again the same situation: let's say I prepare a PDF which uses Adobe Garamond Pro, and embeds that font. Is it legal for me to just send that document to the print house for printing, if I had purchased the Basics OpenType edition? How worried should I be about this?
    Yes.  It is legal to send the document to a print service provider with the font embedded in PDF.  You are printing a document, and your interpretation of what it means to “publish” or be a “publisher” is not relevant.  The words don’t even appear in our EULA.

Maybe you are looking for

  • Component Monitoring Issue: Message: Unable to log on to system XYZ

    Hi, I have installed PI 700 with SID ABC and configured with R/3 system SID XYZ. Now while checking Component Monitoring-->Integration Engines--->Proxy Runtime XYZ I am getting following error. Message: Unable to log on to system XYZ in language en w

  • Unable to connect, when connected

    Two days ago, a Verizon repair man replaced my router for the internet. Since then, I have been unable to connect to anything that allows downloading, such as Itunes and EA game downloader. I get a message that states that he connect has timed out, o

  • New to Content Server 4

    Hi, I am just new to content server. My company asked me to expolre content server 4 and how it can be integrated with e-commerce site. So could you please tell me where can i get the developer license and how much it will cost? or is it require to b

  • JAVA Game DEV

    Does anyone know of a site which will walk a total newbie through making a very simple game in Java. It doesn't matter how crappy the game is, just something to get the newbie started. The website is for me :) Thanks, Christopher Gillis

  • AE linked comps not working on Premiere Pro and look like vertical bars

    Hello, I recently updated my CC to the latest version and then opened a project I've been working on for the past month. All the After Effects linked comps show like vertical color bars in the project. I have tried to relink them but that only messed