Event 26330 "Database connectivity is lost"

Hi there,
at our customer we're using SCOM to monitor the productive SCSM Environments for alerts.
We had now couple of times the alert with ID 26330 and Source OpsMgr SDK Service. Here are some more details of the Event from the OperationsManager Log
The System Center Data Access service lost database connectivity.
Database name: ServiceManager
Server instance name: S000243\SCSMINSTANCE
Exception message: Transaction (Process ID 55) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
In most cases the Connection was re-established again within seconds. So my colleague and I started wondering why this alert is then still active. In the monitor details he checked what the healthy state conditions are so that this kind of alert gets auto-resolved
in SCOM. The monitor is apparently looking for another Event with ID 26331 to become healthy again. The weird thing though is that we never had such an Event logged yet, even if we forcely restart the Data Access Service and we can ensure that the Connection
is fine again this Event ID is not logged.
So after some research in the Internet we stumble upon this blog post:
http://blopon.blogspot.ch/2007/10/sdk-service-event-id-26330-is-raised.html
That's exactly what we're experiencing as well. He's saying this was a bug in SCOM 2007 and is most likely fixed by now. But we all know that SCSM is built upon the (old?) SCOM Framework. So is it possible that this bug has been fixed in SCOM 2007 but never
in SCSM?
We're running currently SCSM 2012 SP1 CU2 (about to updated to CU6 soon).
Had someone of you ever experienced the same Events and knows how to fix it properly? Just closing the alert and the Incident is just stalling the Event from happening again :)
Thanks
Alex

It is very possible. the Service Manager 2012 SDK is based on the 2010 SDK, which was itself based on the Ops Manager 2007 SDK. I can't find any documentation to this effect right now, but i would be more then willing to believe it was based on the RTM,
rather then a later Service Pack or CU.
This seems like an ideal time to test the new product team's suggestions on
recent LyncUp calls that https://connect.microsoft.com/WindowsServer/Feedback is a vital and open point of contact for issues and concerns. I'm personally skeptical of this claim,
given that (at the time of this post) there are three issues, one has been summarily dismissed, and the other two have no comment, but i haven't had anything to submit since I've been working with other system center components recently. If their claims hold
up, then this would be the perfect case for them to prove their new commitment beyond doubt, since this is an easily reproducible, seemingly easily diagnose-able, and possibly easily repairable fault.
I encourage you to throw this up there, with as much documentation as you can. i will watch with baited breath, to abuse an idiom, to see the response.

Similar Messages

THE DATABASE CONNECTION IS LOST :;; WIERD ORA-01012 NOT LOGGED ON ERROR

ERROR: ORA-01012 NOT LOGGED ON ERROR
I AM USING A JAVA SWING INTERFACE (JDK 1.1.8), WHICH USES JNI TO CALL C PROGRAMS WHICH IN TURN CONNECTS TO THE DATABASE, ORACLE 8.1.6.
A DATABASE CONNECTION IS ESTABLISED IN THE MAIN CLASS BY CALLING A FUNCTION FROM THE CONSTRUCTOR.
FOR ALL OTHER FUNCTION CALLS WHICH ARE MADE FROM WITHIN THIS CONSTRUCTOR, THE CONNECTION STAYS.
BUT AFTER THE CONTRUCTOR CALL IS COMPLETE, DATABASE CONNECTION IS STRANGELY LOST. THUS ALL OTHER FUNCTION CALLS FAIL BECAUSE OF CONNECTION ISSUES GIVING ORA-01012. THOUGH IF I CHECK UP IN THE DATABASE, THE CONNECTION DOES FIND AN ENTRY.
SO IT APPEARS THAT SOMEHOW THE JAVA INTERFACE LOOSES TRACK OF CONNECTION. BUT STRANGELY ALL THE FUNCTIONS WORK IF CALLED FROM THE CONSTRUCTOR......... BUT THATS NOT THE IDEA.
PLEASE HELP, THIS PROBLEM IS BUGGING ME FOR WEEKS NOW.
THANKS
AMIT

apologise for the caps lock.
i am working on a previous system with java swing front end which alread uses jni, and connects to database using pro *c.
My problem is that the connection is lost as soon as the constructor of the main class is run, giving an
ORA-1012 NOT LOGGED ON ERROR.
But if i place the same calls in the contructor all the database call work.
It somehow appears that the java interface looses the connection context. Though the session does find entry in the oracle dynamic tables as long as i dont close the front end main window, thereby meaning that its the jave interface which looses the context.
part of the code of the main class eiquser.
//constructor
public EiqUser() {
     super();
     initMRI();
private void initMRI() {
     try {
          /* initialize geoManager environment */
          int rccc = new EiqCfuncs().eiqInitEnv();
//eiqinitenv is a c function which connects to database using pro *C
          EiqCfuncs cfuncs = new EiqCfuncs();
          //EiqCfuncs has the prototypes of c functions used bye the java interface
          this.ivjFileMenu.setText(cfuncs.eiqGetText(resNum.getTEXT_FILE_MENU())); // sets the menu name
and so on.........
public void eiqUser_WindowClosed(java.awt.event.WindowEvent windowEvent) {
     new EiqCfuncs().eiqTermEnv(); // gives ora-1012 error
//eiqtermenv is supposed to disconnect from data base, but returns an ora-1012 not logged on erro
     return;
//eiqtermenv closes the connection with the data base. But fails in this case. if i place the same call ( eiqtermenv) in the initMRI function or the contructor it succeeds.
Plus if i dont use the java interace and use a c stub for executing the same sequence of functions, then i dont face any problems.
the proc calls exectuted ultimately by...
:::eiqinitenv
exec sql connect using :sqlid identified by sqlpw; // succeeds giving sqlerr.sqlcode=0;
::::eiqterm env
exec sql commit work; //fails giving 0ra-1012 error
exec sql rollback work;
Why is the java interface loosing track of the connection once done with the constructor of the main class?? The session still finds an entry in the oracle dynamic tables.
Please help
Thx
Amit

Database connection lost during running report

Hello Experts, Our environment is WINDOWS2008 SERVER / ORACLE 10G / ORACLE REPORTS.
The problem we are facing is , while running one of the particular reports which runs oracle reports , connection to database server gets lost. Acturally the form is printing a
bar code label, this is performed by running oracle reports runtime 10g. I dont know what is the reason the database connectivity gets lost from reports runtime engine. But the form runtime engine working fine without any database connectivity issue. Kinldy help me to resolve this issue. thanks

Please, close this thread and open a new one in the correct forum.
Reports

Database connection lost during report

Hello Experts, Our environment is WINDOWS2008 SERVER / ORACLE 10G / ORACLE REPORTS.
The problem we are facing is , while running one of the particular reports which runs oracle reports , connection to database server gets lost. Acturally the form is printing a
bar code label, this is performed by running oracle reports runtime 10g. I dont know what is the reason the database connectivity gets lost from reports runtime engine. But the form runtime engine working fine without any database connectivity issue. Kinldy help me to resolve this issue. thanks

Hi,
1- what is the Reports version being used?
2- What is the error you are getting?
3- Have you tried to enable reports trace and see what is happening in trace file?
Thanks, Roberto

DW8 - My Site Database Connections are Missing

Has anyone experienced their site database connections being
lost in Dreamweaver 8? This is not isolated to one site definition,
but on all of my sites.
I cannot add a new database connection, and I cannot access
existing database connections while trying to create new
recordsets. All my existing recordsets and bindings appear in the
Application panel. When I click the + button to create a new
connection in the Databases tab, nothing happens. My sites are
fully defined with document types and testing servers defined.
Has anyone experienced this or know how to fix it? I've
searched and searched and cannot find anything about this anywhere.
Thanks in advance.
hg

Hi!
You could try this It worked for me on all my connections.
I found a extension called SP2DBFix1.0.2.mxp
Down load here,
http://download.macromedia.com/pub/dreamweaver/extensions/SP2DBFix1.0.2.mxp
to fix a XP pro service pack2 connections.
To fix: I went to Sites/Advanced/Remove connection Scripts,
ran that removed
my connection scripts. I deleted all my connections in the
connections
folder, so make sure you copy the connection info so you can
re make them. I
then shut down Dreamweaver 8 installed the extension then
opened dreamweaver
8 made a new connection and it works.You have to run this
same routine on
every site you have setup with connection scripts sorry, but
its a bug of
some kind.
Good Luck.
Dave
"achwebman" <[email protected]> wrote in
message
news:fnvhte$9fk$[email protected]..
> Has anyone experienced their site database connections
being lost in
> Dreamweaver 8? This is not isolated to one site
definition, but on all of
my
> sites.
>
> I cannot add a new database connection, and I cannot
access existing
database
> connections while trying to create new recordsets. All
my existing
recordsets
> and bindings appear in the Application panel. When I
click the + button to
> create a new connection in the Databases tab, nothing
happens. My sites
are
> fully defined with document types and testing servers
defined.
>
> Has anyone experienced this or know how to fix it? I've
searched and
searched
> and cannot find anything about this anywhere.
>
> Thanks in advance.
>
> hg
>
>
>

Processes 'stuck' after problems with database connection

First in the production environment, during database failover (MSSQL Server cluster), and later in testing, we encountered processes that are 'stuck' on some random operation. Admin console doesn't show stalled operation or branches, process is running, all operations are completed except last which was in several cases still in status Running, and in one case it was Completed but next operation was not started.
When operation is still running one would expect to select it and click 'Retry' in hope that process will continue but it seems there exist a bug in "Process Instance Detail" part of the admin console - it gives an error: "This operation cannot be completed without the selection of one or more operations from the list below!"
We can try using 'Terminate' for this operation and probably several that follow (because they would probably stall without data from first terminated operation) in hope that process which runs in big user loop can arrive at a step where it can recover from all this using existing data but it's messy and doesn't always work.
When the operation is in status Completed admin cannot do anything at all. This completed operation cannot be retried or terminated because selection box is grayed out. Process and data in it is irrecoverably lost and must be initiated from start.
I must say we had large problems before if database connection is lost even for few seconds (intentional fail over from one db node to another) - but now, when we filled check-connection-sql in datasource configuration Livecycle is behaving a lot better but still with above problems.
How can it happen that LC stops executing process workflow and stops on some operation just because it wasn't able to get valid db connection for several seconds? Is it some problem with transactions or what? What can I do? Where to look?
We are still on LC ES2 SP3. JBoss on Windows Server 2003 and MSSQL 2005.
Any help is appreciated.

I would suggest you to contact the Adobe support so they can look further in system as well as LC database.

FIM 2010 Sync Error : stopped-database-connection-lost

Hello everyone,
a weird thing just happened to me,
i'm synchronizing my MA and suddently i get the "stopped-database-connection-lost" error
i have 5 Galsync MAs working perfectly and this sixth one just failing ... (since like today)
which makes me wonder what is happening ... ?
any ideas ?
thanks !
Hitch Bardawil

Hitch,
Look in the event log on the FIM Sync Server and on the SQL Server.
This error occurs when FIM can't contact the SQL Server that hosts the FIMSynchronizationService database.
Does this happen every time the sixth MA is run? What if you run them in a different order (might help us distinguish between a resource issue and something specific to that MA)?
Here are a few related threads:
http://social.technet.microsoft.com/Forums/en-US/65920fc0-a9ac-4a87-892f-338a6884cbd5/action?threadDisplayName=fim-ma-run-profile-stuck-with-stoppeddatabaseconnectionlost
http://social.technet.microsoft.com/Forums/en-US/39129eac-09d3-48ff-83f9-ecb4ae2424b6/action?threadDisplayName=sharepoint-profile-synch-stoppeddatabaseconnectionlost
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Oracle XML vaidation causes database connection lost.

Schema document:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
     <xsd:annotation>
          <xsd:documentation xml:lang="en">
          </xsd:documentation>
     </xsd:annotation>
     <xsd:element name="BDDString" type="xsd:string"/>
</xsd:schema>
XML document:
<?xml version="1.0" encoding="UTF-8"?>
<BDDString><Path>USA</Path></BDDString>
Result http://apps.gotdotnet.com/xmltools/xsdvalidator/Default.aspx validation:
Validation error:
<?xml version="1.0" encoding="UTF-8"?>
<BDDString
Error at (2,14): The element 'BDDString' has invalid child element 'Path'. An error occurred at , (2, 14).
Error at (2,14): The 'Path' element is not declared. An error occurred at , (2, 14).
<Path>USA</Path></BDDString>ORACLE validation:
Declare
     xmlObj XMLType;
begin
     xmlObj := XMLType('<?xml version="1.0" encoding="UTF-8"?><BDDString><Path>USA</Path></BDDString>',
     'cb78db306e061027a7c4b02b1a84d6fb');
     XMLType.schemavalidate(xmlObj);
end;
Result: Oracle XML vaidation causes database connection lost!
*** SCRIPT START : Session:M1GLOBAL_DEV15@MATRIX(5) 3-мар-2005 14:05:41 ***
Start SQL Editor Execution ...
Processing ...
xmlObj := XMLType('<?xml version="1.0" encoding="UTF-8"?>
ORA-03113: end-of-file on communication channel
*** SCRIPT END : Session:M1GLOBAL_DEV15@MATRIX(5) 3-мар-2005 14:08:02 ***
End SQL Editor Execution
Task "SQL Editor Execution": Operation aborted
SQL Editor Execution terminated with errors
Task "SQL Editor Execution" in DoTerminate(): Session Manager: No connection to M1GLOBAL_DEV15@MATRIX
Help!
Question:
     1)Why Oracle validation incorrectly works?
     2)How it to correct?

Hi,
1- what is the Reports version being used?
2- What is the error you are getting?
3- Have you tried to enable reports trace and see what is happening in trace file?
Thanks, Roberto

EJB Timer stops when database connection lost

G'day.
We use EJB Timers quite successfully in stateless session beans under Sun Java System Application Server 8.1 on Windows Server 2003.
We start and stop the timers for specific session beans using public intefaces on their respective beans. This works fine.
The problem we have is when the JDBC connection used by the EJBTimer service is dropped, such as when the remote database / machine falls over or (probably) when the network is lost. All the timers stop working at this point.
The timers do not restart when the database connection is restored either, despite the entries still being in the ejb__timers__tbl table.
If we stop and start the application server instance then they do restart.
We've looked at the setup of the timers but this seems to be pretty straightforward with no options that seem to influence this.
We've tried altering the JDBC connection validation settings but this doesn't seem to have made any difference.
Anyone have any ideas?
Robski!

There are no special options to handle this case in the current timer service implementation. Please file an issue describing the scenario here :
https://glassfish.dev.java.net/servlets/ProjectIssues
--ken

Database Connection through Event Handler

Hi,
i wanted oim database connection through post event handlers . Any idea how to achieve this.
Thanks In Advance
Swati Pandey

Got the solution.
- Swati Pandey

How to reconnect to a database if connection is lost during execution

How to reconnect to a database if connection is lost during execution of the program.
Please help me.
thanks in advance.

First close the old connection with "connection.close();" Catch all exceptions in case close() fails. Then open a new connection just like you opened the original one.

Harry Potter and the lost Weblogic-database connection

Hi All,
I don't know if this is the correct forum, but here goes...
I'm working with Weblogic, connecting to an Oracle database on a rather unstable network. From time to time, the connection to the database is lost, and at the moment, this means having to restart weblogic.
Is there any way to configure weblogic to automatically reconnect to a database if the connection is lost and then restoired?
Thanks in advance for your help.

you should have a connection pool setup in weblogic and if the connection is bad, you return gracefully from that method/class, then when you try again you'll acquire a fresh connection
but you absolutely SHOULD NOT have to restart the server for this
even if the db server goes down and gets rebooted you shouldn't have to restart weblogic

Weblogic and lost database connection

Good Morning,
I'm working with Weblogic, connecting to an Oracle database on a rather unstable network. From time to time, the connection to the database is lost, and at the moment, this means having to restart weblogic.
Is there any way to configure weblogic to automatically reconnect to a database if the connection is lost and then restoired?
Thanks in advance for your help.

this forum is about Sun's J2EE sdk/application server.

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

How to correct close database connection after report generation

Hello
I have problem a with alive database connection after report creation and report closing. How to properly to close connection to database?
Best regards
Edited by: punkers84 on Jun 17, 2011 10:38 AM

that's what I am doing... after viewing the report, I call the close method on the window closing event of the container window. but the connection is still open. I had a lot of other issues with my jdbc driver but after downgrading to an older version those issues are resolved.Only this one is still there! Is there any other way to close the connection (like using dbcontroller or etc.)?

Event 26330 "Database connectivity is lost"

Similar Messages

Maybe you are looking for