Event Base Scheduling In ODI

Hi,
I have two question:-
1) is there any concept like event based scheduling in odi??
2)I have two two scenario scheduled at different time.I want if the first scheduling is complete the next scheduleing will start(otherwise not).Is it possible in odi?
If yes then please reply how??
Thanks

1) You can use some tools in your package that wait for the event. Ex : "Odi File Wait" (the event is a file) ; "Odi Wait for Data" (the event is an satisfied SQL Statement ) ; ODI Wait for Child Session (the event is another ODI Session)
Your ODI scenario will be always in "run state", but it will just wait the event before executing the data flow.
2) I assume you can do this with LOAD PLAN (available in ODI 11g)

Similar Messages

Custom Events and Scheduling more than once

Hi,
in BO 4.1, I successfully triggered WebI Report instance generation by a "Custom Event" through scheduling.
Now, we have the requirement that the report should not be triggered only once but always when the event is triggered.
At first glance, this looks tricky bc. in order that the report "reacts" to the event, the report itself must be scheduled with the event (it gets an instance "pending" that "wait + reacts" to the event). So it looks like we need schedule the report always manually with "event" before it is ready to react to the event specified in the scheduling.
Is there any user-friendly trick to make the report react upon every fired event without having to "schedule" the report manually with the event?
(Similar to schedule daily, just that the event is the trigger, note a daytime...)
Best Regards

Hi Florian,
What is the frequency set under Recurrence option for the report instance?
Can you give an idea like after how much time the event can be triggered?
For example, if you are expecting the event to change in an hour, you can schedule the recurrence as hourly or you can specify something like 0 hours and 15 minutes or something like that.
In that case, once the event is fired, your report instance will be ready to trigger after 15 minutes for the next run.
Would suggest you to sync with the BO administrator as concurrent triggering of large number of instances can give load on Job Servers.
Hope it will help in some way.
Regards,
Yuvraj

How to View the Scheduler in ODI Console

Hi
In ODI Studio, we may Schedule a Scenario and also, we may view all Schedules process from the Agents (View Schedule option).
My colleagues are going to use ODI Console, but we cannot find out HOW to View the Schedule in ODI Console.
In Oracle documentation about FDMEE, we can read the following: If you want to cancel a specific instance of a schedule, use the ODI Studio or ODI Console... see the PDF document in attachment.
Regards
Claude

To display the schedule for one agent:
In Topology Navigator expand the Agents node in the Physical Architecture accordion.
Select the Physical Agent you want to update the schedule.
Right-click and select View Schedule.
The Schedule Editor appears, displaying the schedule for this agent.
Check: http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/running_executions.htm#ODIDG634
HTH -
Jasmine

Problem in Creating and Scheduling an ODI Scenario

Hi,
while Creating and Scheduling an ODI Scenario with the help of the following link:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/10g/10135/creating_scheduling_scenario/creating_scheduling_scenario.htm#t2
Oracle DI Agent is not listed in services window(Start>Control Panel>Administrative Tools > Services).
What shall I do?
please tell me.And in addition please tell me the use of the Oracle DI Agent and why should we stop its service before creating the schedule??
Thanks
Anindya

Please also look into this link http://odiexperts.com/agent/
First of all did you got any Error why creating Agent Server else the agent service should be visible.
Else please try this step.
Update Odiparams
agentservice -i -s <agent_name>
Go and look for Services starting with Oracledi_Agent_<agentNAME> and start it Finally test the agent and you should be able to schedule.
you dont need to stop the Agent for every new Schedule, but you will need to right click on Agent and click on Update Scheduling -http://odiexperts.com/scheduling-using-odi-scheduler/
If you are getting an error please provide us the error info and step at which you got the error.

Using Tivoli Work Scheduler with ODI

Hello,
I have a customer who is looking to use Tivoli Work Scheduler with ODI.
Are there any references, best practices or general advice how to use TWS with ODI. Alternatively, if there is another recommended approach then i'd be interested to know.
Regards,
David

Is this item supposed to be compatible with the 2nd gen nano?
I ask because the dock connector on the second gen nano is not in the same place as the other iPods (the first gen nano for instance) and this may be your problem.
There have been posts here before about 2nd gen nanos not working with accessories that accommodate the first gen.
Best bet would be to contact the manufacturer.

SCMA - Event based Scheduling in Schedule manager

Hi all,
Like SM36, can we schedule things in Schedule Manager based on system events?
Please let me know how to do this, if it is possible.
Thanks,
Vishal.

If you are using OBIA with informatica check this
https://forums.oracle.com/message/10538475#10538475
Thanks,
Saichand

Event based scheduler job - 2 events at the same time only 1 run

Hi,
i converted our dbms_job - jobs to the newer package dbms_scheduler.
It is a 10.2.0.4 patch 23(8609347) database on an windows server 2003 R2 Enterprise x64 Edition SP2.
The Jobs(about 130) are nothing special ... only some statistics, matview-refreshes and so on.
For the notification of failed jobs and jobs which run over the max_run_duration i downloaded and installed the job notification package.
The jobs are assigned to different departments and the corresponding developer teams in our company.
I created a notification job for each department and if a job fails we (the database administrators) and the corresponding deverlopers will be informed.
Now i ascertained that only 1 email will be send if 2 jobs of the same department fails at the same time.
The emailer-jobs are auto-generated by the job notification package. I only modified them to look after all jobs of special department and not only after one job. (--> event_condition ... object_name LIKE 'XXX%')
example for dba-jobs(copy of the script output of TOAD):
SYS.DBMS_SCHEDULER.CREATE_JOB
       job_name        => 'DBA_JOBS_EMAILER'
      ,start_date      => NULL
      ,event_condition => tab.user_data.object_name LIKE ''DBA%'' AND tab.user_data.event_type in (''JOB_FAILED'',''JOB_OVER_MAX_DUR'')'
      ,queue_spec      => 'SYS.SCHEDULER$_EVENT_QUEUE, JOB_FAILED_AGENT'
      ,end_date        => NULL
      ,program_name    => 'SYS.EMAIL_NOTIFICATION_PROGRAM'
      ,comments        => 'Auto-generated job to send email alerts for jobs "DBA%"'
    );I thought that a queue is used to manage all events from the scheduler jobs. So i made a test with 2 dba jobs and simulated a failure at the same time but i received only one mail.
So what is happend with the second event? I looked for the events in the qtab(SCHEDULER$_EVENT_QTAB) which belongs to the event queue(SYS.SCHEDULER$_EVENT_QUEUE) and no event was missing.
So i think the emailer job has to run 2 times.
Is anyone able to explain or to find my mistake?
I know that the easiest way is to create one emailer job for each normal job but i think this is a little bit costly because all the arguments are the same for one department.
Thanks & Regards

Thanks for your fast answer.
You are right with the "enabled => TRUE;" part and i only forgot to post it.
So the Job is enabled (otherwise it would not send any mail). Because it is sending one mail i think it is also not necessary to hand over a job_type.
Additionally the job starts a program ... so it is right to set the job_type='STORED_PROCEDURE' isn't it?
And also right ... i already added the agent as subscriber to the queue.
Anyway i think the whole thing do what it have to do. So in my oppinion there are no big mistakes in creating the job or at adding the subscriber.
There are also no problem in raising the events by itself and enqueue them in the scheduler event queue.
There is only a problem when 2 jobs fails (or run out ouf max duration) at exactly the same time.
If i understand it right:
The agent/subscriber will find the "JOB_FAILED"-event for the first Job in the queue and starts the emailer Job.
The agent will also find the "JOB_FAILED"-event for the second Job and wants to start the emailer Job again.
I don't know if this is really the problem but perhaps the emailer-job can not be started in consequence of the second event because ist is already running.
I also don't know if this is a mistake of the agent or of the emailer-job by itself.
I only want that it runs two times (one run for each event). I my case it also doesn't matter which email is send at first.

Problem with event based scheduling

Hi,
We are having a ETL job running everynight, so i need to have daily
report as soon as my ETL job is finished. For that we have run some
script to create a event file after completion of ETL job. And by using
this event file we have scheduled a report that runs after this event
file is created. Now the problem is that the scheduled report is
generated before the ETL job is finished. This seems to be working fine
till last month, but this month we are facing this issue. my question
is why the scheduler is triggered before the event file is created
(event file is created after the completion of ETL job)
Do anybody faced this iss
FYI
We are on BO XI 3.1 with no SP's and FP's and on windows environment.
Do anybody faced this issue?Any advise is appreciated.
Thanks,

Hi,
We are also on BO XI 3.1 with no SP's and FP's. We create Event files after the ETL jobs are completed. These files are used to create BO Events (File), which are used as scheduling criteria before the Reports can run. These files are deleted daily before the next files are created, something you might want check.
Mike

EVENT BASED SCHEDULER

Hi All,
I have two databases lets say A an B.
I have a STORED PROCEDURE on DATABASE B which runs everyday via a schecduler at 8 in the morning.
This procedure basically picks up data from a TABLE in database A and processes it everyday.
Now I want to modify the scheduler from the current one that runs at say 8 to one that runs the STORED PROCEDURE whenever data is inserted into the table.
Is it possibble in ORACLE?
Datbase version is 10g
Any help would be highly appreciated.

Elessar wrote:
Hi All,
I have two databases lets say A an B.
I have a STORED PROCEDURE on DATABASE B which runs everyday via a schecduler at 8 in the morning.
This procedure basically picks up data from a TABLE in database A and processes it everyday.
Now I want to modify the scheduler from the current one that runs at say 8 to one that runs the STORED PROCEDURE whenever data is inserted into the table.
Is it possibble in ORACLE?
Datbase version is 10gHere is one way of doing it:
Oracle Scheduler - Event Based Jobs.
One way of re-using it is, raising an Event trigger to Kick-off the jobs, preferably once data is inserted into tables. Definitely, this has to be done by the system performing the Inserts.

Schedule in ODI

Hi,
i want to schedule a job in ODI.The job will run daily in every 2 hour from 12:00PM to 06:00PM.
Can u pls suggest me how do i achieve this?How do i set the sceheduling options in ODI. I am using ODI version 10.1.3.4.4..
Thanks

Hi,
Go to your scenario which you want to schedule, expand that and double click on SCHEDULING, a window will open. Give the necessary details over there.
Then go to your Topology Mgr -> Physical Agent and select the appropriate agent and click Update Scheduling.
Before that, just go through the thread below,
How to create a Scheduler?
Thanks,
Guru

Events Based Scheduling

Database Ver. 11gR2 (11.2.0.2.0)
Hi Guys,
How do you run jobs in oracle scheduler based on events? I have a job that needs to run after the successful completion of another job. I don't want to use chains. I have searched on the web, but all the examples I see are where a temp table is created and a row is inserted and then another PL/SQL block is run to manually pass a 'GO' value. I am looking for the a job to raise the JOB_SUCCEEDED event and then another job kicks in based on this event.
Any detailed examples would be greatly appreciated. Also if using any other PL/SQL package, what necessary privileges would be required to execute that package.
Thanks in advance.
VB

Here is a simple example. You create a job, MY_JOB, that raises the job_succeeded event. You also create an event-based job, MY_JOB_CONSUMER, that consumes event messages from sys.scheduler$_event_queue but only for job_succeeded events raised by MY_JOB.
First you let the user subscribe to the Scheduler event queue using the ADD_EVENT_QUEUE_SUBSCRIBER procedure. “my_agent”, or whatever name you use, is the name of the Oracle Streams Advanced Queuing (AQ) agent to be used to subscribe to the Scheduler event queue. This call both creates a subscription to the Scheduler event queue and grants the user permission to dequeue using the designated agent. The subscription is rule-based. The rule permits the user to see only events raised by jobs that the user owns, and filters out all other messages:
DECLARE
   agent_already_subscribed_exp   EXCEPTION;
   PRAGMA EXCEPTION_INIT (agent_already_subscribed_exp, -24034);
BEGIN
   sys.DBMS_SCHEDULER.add_event_queue_subscriber ('my_agent');
EXCEPTION
   WHEN agent_already_subscribed_exp
   THEN
      NULL;
END;
/Then you create MY_JOB_CONSUMER:
BEGIN
   sys.DBMS_SCHEDULER.create_job (
      job_name          => 'MY_JOB_CONSUMER',
      job_type          => 'PLSQL_BLOCK',
      job_action        => '/* Add you code here */ NULL;',
      event_condition   => 'tab.user_data.event_type = ''JOB_SUCCEEDED'' and tab.user_data.object_name = ''MY_JOB''',
      queue_spec        => 'sys.scheduler$_event_queue,my_agent',
      enabled           => TRUE);
END;
/Now, MY_JOB_CONSUMER is waiting for a message to arrive in sys.scheduler$_event_queue. It will dequeue it only if the condition in event_condition is true.
Create a one time job, MY_JOB, set its raise_events attribute to job_succeeded and enable it:
BEGIN
   sys.DBMS_SCHEDULER.create_job (job_name     => 'MY_JOB',
                                  job_type     => 'PLSQL_BLOCK',
                                  job_action   => '/* Add you code here */ NULL;',
                                  start_date   => SYSTIMESTAMP AT TIME ZONE 'US/Pacific',
                                  auto_drop    => TRUE,
                                  enabled      => FALSE);
   DBMS_SCHEDULER.set_attribute ('MY_JOB', 'raise_events', DBMS_SCHEDULER.job_succeeded);
   sys.DBMS_SCHEDULER.enable ('MY_JOB');
END;
/When MY_JOB executes, it will enqueue a message in sys.scheduler$_event_queue. MY_JOB_CONSUMER will then pick it up and consume it.
Hope that simple demonstration helps.

Scheduling using ODI agent?

Hi,
I want to schedule an interface using the scheduling option in ODI11g. For that I saw somewhere that I need to have agent running. I was able to start the agent
from command line and execute the interface. How can schedule the interface without going through this process. Also I noticed that we can run agent as windows
service in 10g. But I don't see any script or info for 11g. Any ideas on this?
Thanks in advance!!
PM

If you dont want to start up the agent from command line then you can use OPMN to control the agent - http://john-goodwin.blogspot.co.uk/2010/12/managing-odi-11g-standalone-agents.html
Your other option is to deploy the J2EE agent into WebLogic but you would still need to start up the managed server by some mechanism e.g. node manager or manually create a window service.
Once you have the agent running you can just schedule the interface/scenario from in the designer/operator.
Cheers
John
http://john-goodwin.blogspot.com/

Configuring automatic messages/events from scheduler to send email

Hi ALL,
I'm looking for configuring events like the following:
1. Configure an event to send an email after running the scdeuled report if the report data is empty.
2. Configure an event to send an email if the scheduled report failed to generate instance to the mailer list.
Is it possible to configure events like this. Please point some docs if available.
I'm using BOE XI R2 version.
Thanks,
Rams.

Is it possible to send a consolidated email once all the scheduled reports are run and reports stored in a file location.
Message could be say:
' reporttitle1',
'reporttitle2'
etc..
have been successfully run and stored in the location.
Please suggest whether it could be done via java api.
I'm using BUsiness Objects Enterprise XIR2.
Thanks in advance.
Regards,
Rams.

Cannot edit event titles once event is scheduled

Hello there,
I am encountering a problem with iCal not letting me edit my own schedule titles.
When clicking right on the event in order to edit it, the tilte bar is greyed out and not editable.
This error occurs with multiple (and completely new) users. Also I have copied iCal from another system to the Mac, without any changes on effect.
Any ideas?
Regards

This problem is solved by now. I deleted /System/Library/Fonts/LucidaGrande.dfont as described here:
https://discussions.apple.com/thread/2305622?start=0&tstart=0

Updating scheduling in ODI

Hi,
I'm create a sql scripts , this script insert data in to table of work reposotory (snp_var_plan_agent,snp_plan_agent), because i want to scheduling my Scenarios by this scripts, but I must go to the topologie manager and click Update scheduling,
Please have an idea to update scheduling by sql scripts
Thanks

The scheduling can be updated by using the topology button, using the ODI tool, OdiUpdateAgentSchedule or by restarting the agent.
You could try creating a scenario which can be called from the command line which calls the tool.

Event Base Scheduling In ODI

Similar Messages

Maybe you are looking for