Using Tivoli Work Scheduler with ODI

Hello,
I have a customer who is looking to use Tivoli Work Scheduler with ODI.
Are there any references, best practices or general advice how to use TWS with ODI. Alternatively, if there is another recommended approach then i'd be interested to know.
Regards,
David

Is this item supposed to be compatible with the 2nd gen nano?
I ask because the dock connector on the second gen nano is not in the same place as the other iPods (the first gen nano for instance) and this may be your problem.
There have been posts here before about 2nd gen nanos not working with accessories that accommodate the first gen.
Best bet would be to contact the manufacturer.

Similar Messages

Necessity of definin periodic work schedules with the counting classe - Reg

Hi every one,
While customizing attendances and absences we have to define the periodic work schedule with the counting classes. And this counting classes are used in the counting rule. Can anyone please tel me what is the need of defining periodic work schedules with the counting classes.
With Regards,
Jagadeesh

if there are multiple PWS in an organisation and if the client requires the absences to be counted in different manner depending on the PWS. this counting class can be used.
use the appropriate check box in counting rule.

Problem kicking off process chains using Tivoli Job Scheduling

In our pre-production BW system testing,when the process chains are being kicked off through Tivoli,they are not working.
We dont get issues when the chains are run directly in BW,without using Tivoli.
The jobs with 'after event' RSPROCESS setting that kick off next node on each node's completion,are not leaving out a 'copy' after a scheduled run.
So in the next run from Tivoli,the dependency job isnt there in scheduled status,which fails the chain.
We tried manually copying the dependency jobs on the nodes.Doing this,chain does kick off from Tivoli.But again jobs dont leave copies and next run from
Tivoli fails.We tried using 'periodic job' setting.This leaves copies of job.But then why is BW able to copy out and kick off jobs,while this isnt happening when kicked off through Tivoli.
A node in the process chain is BLUE when it has a scheduled job ready in sm37,but turns GREY(no scheduled job is there in sm37),once the Tivoli kicks off chains after the manual copy.
We suspect this either to be a authorization problem or an issue with how it works when kicked off through Tivoli.Process chain 'context' is somehow not created when it runs through Tivoli.
Anyone seen such an issue before?Suggestions are welcome..
cheers,
Vishvesh

Hi Manfred,
The chain does get kicked off from Tivoli.
But the job fails in Tivoli as..when it tries to hand over execution to the 1st local chain in the 'meta chain' the required job isnt there in scheduled status,with the 'after event' RSPROCESS dependency set on it.
cheers,
Vishvesh

Airport Express used to work fine with Extreme, now doesn't

There are so many threads dealing with this, and a lot of alphanumeric references, but they seem to be with newer hardware. Here's my situation:
I'm using an older (4 years?) Airport Extreme Base Station, with an older Airport Express that shows up as "6d156f". The Express used to work just fine with the Extreme - plug it in, configure it, stream itunes just fine.
Now, the express continually flashes amber. I've done the reset numerous times to get it to show up in the Airport Admin Utility. I can go through the configuration steps, and when I get to the window to select the network I want it to join, everything seems fine. I select a password to protect the Express, but when I click "Continue", nothing happens. No activity from the Macbook running the configuration, nothing but a blinking amber light from the Express.
I re-installed the firmware update 6.3 with the Express connected via ethernet cable as some suggested. Didn't seem to do anything.
Of note, I had the same issue last week at a vacation rental, but was able to get the Express to work after a reset.
Sorry for the rambling, but I'm in a fog about this now.
Thanks in advance for any wisdom.

Temporarily connect your Mac to the AirPort Express with an Ethernet cable, and then, try to access it with the AirPort Utility again.

Using BOE Enterprise Scheduler with Sap BODI?

Hi,
I am under the impression that you can use the BOE Enterprise Scheduler to schedule BODS jobs. Can you also use the BOE Enterprise Scheduler to schedule BODI jobs? Is there someplace I can get some documentation on how to integrate the BOE Scheduler with BODI and/or BODS? I haven't been able to find any yet...
Thanks in advance!
Mike

you can open the technical manuals from Designer
or from the following location
%LINK_DIR%\Doc\Books\en\DITechnicalManuals.pdf
navigate to following section from the PDF doc (left pane will display the doc Map)
Data Integrator Management Console: Administrator Guide
-Batch jobs
-Scheduling jobs
-Scheduling jobs in BusinessObjects Enterprise

Anyone using Tivoli or OpenView with Forte?

I'm interested in hearing from anyone who is using Tivoli or HP OpenView
with Forte. What I'd like to know is what capabilities of these products
you are using and whether you used the Forte-supplied "shareware" or some
other means to integrate with Forte.
Thanks,
Stephen
_,--_/\ Stephen Szalla
_/ \ Technical Specialist
{ ) Forte Australia
\_,---. / Voice: +61 3 9684 7711
`* Fax: +61 3 9699 5477
v mailto:[email protected]
http://www.forte.com/australia
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I use Skype and the built in mic and speakers are fine

Error 4450 when trying to burn audio cd....used to work fine with older version of ITunes....

Is Itunes not compatible with windows cd burner.....

I'm having the same problem using 700mb cd-r, but when I try to burn smaller size playlists (300mb) it works fine. I know that when burning as an audio cd the tracks about double in size, so this makes sense. However when I try to burn a playlist 400mb (ends up as 800mb on audio cd) itunes burns most of the songs but errors out on the last few. My guess is the cd runs out of room because itunes thinks it's a 800mb cd and tries to burn that much to it, when in reality it's only a 700mb cd. itunes will actually try to split a playlist that comes out to 1200mb across 2 cds, but still tries to burn 800mb per cd and errors once the cd runs out of room before it has 800mb on it. There needs to be some way to tell it the size of the cds, or at least an update where they fix the size detection. In the mean time it looks like we're stuck with manually splitting playlists so they're smaller than 350mb (if you have cds a different size than 700mb then just keep the playlist below half the cd's capacity).

Can't install win xp using parallels. worked fine with 10.4

parallels 3.x installs fine, But im trying to install xp from the cdrom, and it's been on the screen for over an hour... "setup will complete in about 39 minutes"....
seems nothing is installing... its just sitting there....
worked fine w tiger.
anyone else having issues installing on leopard?

Hi,
which build version of Parallels are you using ?
There were some problems with earlier builds and Leopard.
Current build is 5608 and can be downloaded from Parallels website.
Stefan

Panasonic PV-GS250 used to work great with my MAC

In 2007 I purchased a a Panasonic Digital Camcorder (PV-GS250) and it worked like a dream with my Macbook Pro. Purchased an IMAC (Oct 07) with Leopard OS, the dream continued for both. I hadn't edited for a while and had a new project I was working on. As usual and it loaded like a dream, then my dream became a nightmare, because the playback was incredibly distorted. I don't know if any else has a similar problem but I need help. Not sure if a driver will fix it or what???? Any suggestions????

Is the printer connected to your wirless network? Print a Wireless Network Test if you are not sure.
What version of OS X on your Mac? What router?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT4972 ipad used to work fine with wifi Vizio. now the connection does not work while other lap tops and Ipods in the house work fine with wifi. any suggestions to solve this please

Any suggestions please on how to recover connection of ipad2 to Vizio wifi? (it worked fine in the last few months but the connection no longer exist although other laptops continue to have wifi connection to the same Vizio router.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT204387 I have third party bluetooth that used to work perfectly with IOS 6.1 but now I install IOS 7 and now some of the function on my bluetooth doesn't work.

I like to know anyone having problems with bluetooth functions with new IOS 7 ?

I have the same problem with my iPhone4 connected to my VW car via bluetooth. In the previous version of iOS I could start and stop and change tracks in for example Spoitify with my steering wheel buttons but now with iOS 7 it doesn't work anymore.... Apple please correct this ASAP...

My ion turntable used to work fine with EZ vinyl software, After several iTunes updates, it no longer does. Is mac playing dirty with alternate sources for library music? I'd like to copy more of my LPs

Why does itunes no longer allow my EZ vinyl software to work? Where can I get a free software program that will allow me to once again use my USB turntable?

Herrmann57 wrote:
Why does itunes no longer allow my EZ vinyl software to work?
You mean why hasn't EZ Vinyl software been updated to work correctly?
Have you tried the latest version here? -> http://www.ionaudio.com/ezvc

The McAfee site advisor used to work brfore but no longer does with the new version of Firefox. How do I revert to the olderversion or get the McAfee site advisor to work?

The McAfee site advisor used to work before with earlier versions of Firefox but now no longer does since upgrading to the latest version. It still works with Explorer so it a Firefox version compatibility issue with McAfee. The PC runs on Microsoft Vista.

I am sure that it is only their toolbar that is incompatible. To verify that and ask if they currently support Firefox 5 with their add-ons, go to the following address and post your question(s). Changing their toolbars to be compatible with any browser is their responsibility.
*http://service.mcafee.com/TechSupportHome.aspx?lc=1033&sg=TS
Other than the toolbar, the rest of your security application should be working as expected, but you can also ask that question at the above link. Firefox has built-in malware/phishing protection, if that is what is provided by their toolbar, another question that you can ask at the above link.
*http://www.mozilla.com/en-US/firefox/phishing-protection/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I have macair bought 2009. Bluetooth connect with mouse and keypad not working. It used to work. Batteries are good. Green light flashes on each device, but no connection. Any suggestions to help me here? Thanks.

Dear Community,
I have a macbook air bought new in 2009. Since 2011 I only use it occasionally as I now mainly use my iMac. The mouse and keyboard that came with the macbook air used to work fine with bluetooth connection to the macbookair, but now they don't. The batteries are good. The green light flashes showing it is seeking other bluetooth device to connect to. But they wont connect to my macbookair. What could the problem be? Your help would be much appreciated.

Thanks for that. Yes I checked that already and BT enabled. Yes, external keyboard. But I just moved the computer to different part of room and bingo the devices paired and connected. So problem now solved. Thanks for offering your help.

Time Management - Work Schedule /Absence Quota / Part-time quota generation

Hi Experts,
Need your help!
We have a requirement where we need to create distinct work schedules for each irregular / part-time work pattern and the number of work patterns we have identified is more than 1000. We are using report RPTQTA00 to generate quota. We have used work contract, employee sub-group & employee payscale group in the QUOMO feature to get the base entitlement picked up. We have defined base entitlement for the full time workschedules with 37.0 / 38.5 hours and there is a reduction rule which reduce the absence entitlement for part time employees as per the employement percentage in IT0007. Now we have a scenario where we have created a work schedule with different no of hours for each day of week (M-4, T-6, W-4, TH-6, F-4, S-OFF, SU - OFF); this work schedule is treated as full time work pattern by the system and quota is generated as full time work schedule refering to the QUOMO settings, but as per my client employees with this work schedule have reduced hours of working hours (24 hours, not 37.0 or 38.5 hours)and hence it should be treated as part-time employees, and the quota generated should be proportionately reduced. I have very limited scope to create any ESG or PSG as we do not have any distinct emplyee sub-groups maintained for full-time and part-time employees and the project has already gone-live with payroll/time. It is worth mentioning over here that we are recording absence through ESS and it takes into account the daily planned working time maintained in IT0007, so we are very particular to keep it as accurate as possible.
I would really appreciate if somebody can please suggest any possible solution for the above issue, or guide me on what would be the best way to tackle it. I can give more details in case anybody need to have a better understanding of the issue to suggest a solution.
Thanks in advance
Sujit

Hi Kathy,
Yes, i have found the solution to it. I do not know whether it will fit into your situation or not, but i got two solutions for my issue mentioned above, please check it may help:
1) To use capacity utilization field in IT0008 to get the FTE hours and defining the reduction rule of absence quota based on the capacity utilazation percentage.
2) There are three user exits available in the standard report RPTQTA00, i have used one of them to write my own rules for the calculations (deduction rule)
Do let me know if i can help you in any respect. Thanks.
Regards,
Sujit

Using Tivoli Work Scheduler with ODI

Similar Messages

Maybe you are looking for