Event definition and capacity calculation

Hi,
Due to the implementation of a CSM, there are a couple of things that I need to clarify in order to be sure about the Server requirements.
1. What is the definition of an event in a security device? Is it a violation to rules? Is it a connection fail??
2. How could I posibbly know the storage capacity required to handle the events send by an ASA? Is there an especific size for this logs/packets???
Thanks for your comments.

Hi Douglas,
The events from the ASA are simply the syslogs that are generated by the firewall. However, certain syslogs are "deeply parsed" by CSM to provide additional details. Here is a list of syslogs that are deeply parsed (the rest are displayed as raw syslog data):
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_manager/4.0/user/guide/evntchap.html#wp191617
As for the storage requirements, this will depend on the amount/level of logs that are generated by your ASA.
Hope that helps.
-Mike

Similar Messages

Please describe the definitions and differences: Connection Event, Intrusion event.

Can someone please describe and provide a definition and the differences of a connection event and an intrusion event, as seen in Sourcefire's Defense Center..
Thank you,

Hello friends,
Please, allow me to resurect this old post. I have already installed CSM 4.4 and now I am able to manage an ASA. I have already configured according to the nex User Guide:
http://www.cisco.com/c/en/us/td/docs/security/security_management/cisco_security_manager/security_manager/4-4/user/guide/CSMUserGuide_wrapper/evntchap.html
I am not able to see the events in the Event Viewer client. Would any body suggest me how to troubleshoot this?
Regards!

Content type, list definition and List instance - query

Dear all,
I created a list content type, list definition and list instance for a SessionsList.
I did mistake when created a event receiver file where field name is RegistrationsInfo - did typo error as RegistrationInfo. This field I want to make it as false in the ShowInNewForm= false
When I deploy it with event receiver file - I am getting stack trace error stating that the RegistrationsInfo field is missing.
Without event receiver file - when I deploy the solution and checked the field name - it is showing rightly as RegistrationsInfo.
Content Type:-
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Field ID="{7113CBE5-57E9-4082-A0A2-492B35B69C8D}" Type="Lookup" List="Lists/Courses-List" ShowField="Title" Name="CourseTitle" DisplayName="Courses - Title" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{920AE6A7-2AAE-4E43-8855-7CBD9978EC5E}" Type="Lookup" List="Lists/SessionTrainer" ShowField="FullName" Name="Trainer" DisplayName="Trainer" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{F73D9A96-3C86-4E33-96D5-31E30B08BF40}" Type="Choice" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE" Group="Training Site Columns">
<CHOICES>
<CHOICE>Kerala Meeting Room</CHOICE>
<CHOICE>Orissa Meeting Room</CHOICE>
<CHOICE>Bihar Meeting Room</CHOICE>
</CHOICES>
</Field>
<Field ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" Type="Number" Decimals="0" Min="0" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{03281B47-F1D1-477E-9793-3A19118720EE}" Type="Number" Decimals="0" Min="0" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE" Group="Training Site Columns"/>
<Field ID="{8A900663-6351-445B-ACB3-394F44D45C8D}" Type="Calculated" ResultType="Number" ReadOnly="TRUE" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE" Group="Training Site Columns">
<Formula>=TotalSeatsInfo-RegistrationsInfo</Formula>
<FieldRefs>
<FieldRef Name="TotalSeatsInfo" ID="{03281B47-F1D1-477E-9793-3A19118720EE}"/>
<FieldRef Name="RegistrationsInfo" ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}"/>
</FieldRefs>
</Field>

<ContentType ID="0x0100a9dc01b7e78b45799fe59153d97e2b9e"
Name="SessionList"
Group="Session Content Types"
Description="Session Content Type"
Inherits="TRUE"
Version="0">
<FieldRefs>
<FieldRef ID="{7113CBE5-57E9-4082-A0A2-492B35B69C8D}" Name="CourseTitle" DisplayName="Courses - Title" Required="TRUE"/>
<FieldRef ID="{920AE6A7-2AAE-4E43-8855-7CBD9978EC5E}" Name="Trainer" DisplayName="Trainer" Required="FALSE" />
<FieldRef ID="{F73D9A96-3C86-4E33-96D5-31E30B08BF40}" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE"/>
<FieldRef ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE"/>
<FieldRef ID="{03281B47-F1D1-477E-9793-3A19118720EE}" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE"/>
<FieldRef ID="{8A900663-6351-445B-ACB3-394F44D45C8D}" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE"/>
</FieldRefs>
</ContentType>
</Elements>
Schema:-
<?xml version="1.0" encoding="utf-8"?>
<List xmlns:ows="Microsoft SharePoint" Title="SessionList" FolderCreation="FALSE" Direction="$Resources:Direction;" Url="Lists/SessionList-LD-SessionList" BaseType="0" xmlns="http://schemas.microsoft.com/sharepoint/">
<MetaData>
<ContentTypes>
<ContentType ID="0x0100a9dc01b7e78b45799fe59153d97e2b9e" Name="SessionList" Group="Session Content Types" Description="Session Content Type" Inherits="TRUE" Version="0">
<FieldRefs>
<FieldRef ID="{7113CBE5-57E9-4082-A0A2-492B35B69C8D}" Name="CourseTitle" DisplayName="Courses - Title" Required="TRUE" />
<FieldRef ID="{920AE6A7-2AAE-4E43-8855-7CBD9978EC5E}" Name="Trainer" DisplayName="Trainer" Required="FALSE" />
<FieldRef ID="{F73D9A96-3C86-4E33-96D5-31E30B08BF40}" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE" />
<FieldRef ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE" />
<FieldRef ID="{03281B47-F1D1-477E-9793-3A19118720EE}" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE" />
<FieldRef ID="{8A900663-6351-445B-ACB3-394F44D45C8D}" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE" />
</FieldRefs>
</ContentType>
</ContentTypes>
<Fields>
<Field ID="{7113cbe5-57e9-4082-a0a2-492b35b69c8d}" Type="Lookup" List="Lists/Courses-List" ShowField="Title" Name="CourseTitle" DisplayName="Courses - Title" Required="FALSE" Group="Training Site Columns" />
<Field ID="{920ae6a7-2aae-4e43-8855-7cbd9978ec5e}" Type="Lookup" List="Lists/SessionTrainer" ShowField="FullName" Name="Trainer" DisplayName="Trainer" Required="FALSE" Group="Training Site Columns" />
<Field ID="{f73d9a96-3c86-4e33-96d5-31e30b08bf40}" Type="Choice" Name="TrainingVenue" DisplayName="Training Venue" Required="FALSE" Group="Training Site Columns">
<CHOICES>
<CHOICE>Kerala Meeting Room</CHOICE>
<CHOICE>Orissa Meeting Room</CHOICE>
<CHOICE>Bihar Meeting Room</CHOICE>
</CHOICES>
</Field>
<Field ID="{b6e9c8f5-f1bd-4d98-bd30-194504859acc}" Type="Number" Decimals="0" Min="0" Name="RegistrationsInfo" DisplayName="Registrations Info" Required="FALSE" Group="Training Site Columns" />
<Field ID="{03281b47-f1d1-477e-9793-3a19118720ee}" Type="Number" Decimals="0" Min="0" Name="TotalSeatsInfo" DisplayName="Total Seats Info" Required="FALSE" Group="Training Site Columns" />
<Field ID="{8a900663-6351-445b-acb3-394f44d45c8d}" Type="Calculated" ResultType="Number" ReadOnly="TRUE" Name="OpenSeatsInfo" DisplayName="Open Seats Info" Required="FALSE" Group="Training Site Columns">
<Formula>=TotalSeatsInfo-RegistrationsInfo</Formula>
<FieldRefs>
<FieldRef Name="TotalSeatsInfo" ID="{03281B47-F1D1-477E-9793-3A19118720EE}" />
<FieldRef Name="RegistrationsInfo" ID="{B6E9C8F5-F1BD-4D98-BD30-194504859ACC}" />
</FieldRefs>
</Field>
</Fields>
<Views>
<View BaseViewID="0" Type="HTML" MobileView="TRUE" TabularView="FALSE">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="LinkTitleNoMenu">
</FieldRef>
<FieldRef Name="CourseTitle"></FieldRef>
<FieldRef Name="Trainer"></FieldRef>
<FieldRef Name="TrainingVenue"></FieldRef>
<FieldRef Name="RegistrationsInfo"></FieldRef>
<FieldRef Name="TotalSeatsInfo"></FieldRef>
<FieldRef Name="OpenSeatsInfo"></FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="Modified" Ascending="FALSE">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="AddNewAnnouncement" Location="Resource(wss,addnewitem)" />
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_ONET_HOME)" />
</ParameterBindings>
</View>
<View BaseViewID="1" Type="HTML" WebPartZoneID="Main" DisplayName="$Resources:core,objectiv_schema_mwsidcamlidC24;" DefaultView="TRUE" MobileView="TRUE" MobileDefaultView="TRUE" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/generic.png" Url="AllItems.aspx">
<Toolbar Type="Standard" />
<XslLink Default="TRUE">main.xsl</XslLink>
<RowLimit Paged="TRUE">30</RowLimit>
<ViewFields>
<FieldRef Name="Attachments">
</FieldRef>
<FieldRef Name="LinkTitle">
</FieldRef>
<FieldRef Name="CourseTitle"></FieldRef>
<FieldRef Name="Trainer"></FieldRef>
<FieldRef Name="TrainingVenue"></FieldRef>
<FieldRef Name="RegistrationsInfo"></FieldRef>
<FieldRef Name="TotalSeatsInfo"></FieldRef>
<FieldRef Name="OpenSeatsInfo"></FieldRef>
</ViewFields>
<Query>
<OrderBy>
<FieldRef Name="ID">
</FieldRef>
</OrderBy>
</Query>
<ParameterBindings>
<ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
<ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
</ParameterBindings>
</View>
</Views>
<Forms>
<Form Type="DisplayForm" Url="DispForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="EditForm" Url="EditForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
<Form Type="NewForm" Url="NewForm.aspx" SetupPath="pages\form.aspx" WebPartZoneID="Main" />
</Forms>
</MetaData>
</List>
Event Receiver file:-
public override void FeatureActivated(SPFeatureReceiverProperties properties)
//Reference the newly created session list and perform the following
//1. Set the display name of the "Title" column to "SessID" and hide it from the New and Edit Forms
//2. Make the "SessID" column not required
//3. Set the default value of the RegistrationsInfo column to 0 and do not display it on the new form
//4. Add the built-in "Start Date" and "End Date" columns
//Reference the newly created session list
SPWeb currentWeb = properties.Feature.Parent as SPWeb;
//currentWeb.AllowUnsafeUpdates = true;
SPList sessionList = currentWeb.Lists["SessionList"];
//Title column update
SPField titleField = sessionList.Fields["Title"];
titleField.Required = false;
titleField.ShowInNewForm = false;
titleField.ShowInEditForm = false;
titleField.Title = "SessID";
titleField.Update();
//RegistrationsInfo column updates
SPField registrationField = sessionList.Fields["RegistrationsInfo"];
registrationField.DefaultValue = "0";
registrationField.ShowInNewForm = false;
registrationField.Update();
//Add the Start Date and End Date columns to the list, ensure they both display Date and Time, and add them to the default view of the list
SPFieldDateTime startDate = currentWeb.Fields["Starting_Date"] as SPFieldDateTime;
startDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
SPFieldDateTime endDate = currentWeb.Fields["Ending_Date"] as SPFieldDateTime;
endDate.DisplayFormat = SPDateTimeFieldFormatType.DateTime;
sessionList.Fields.Add(startDate);
sessionList.Fields.Add(endDate);
SPView defaultView = sessionList.DefaultView;
defaultView.ViewFields.Add(startDate);
defaultView.ViewFields.Add(endDate);
defaultView.Update();
sessionList.Update();
//currentWeb.AllowUnsafeUpdates = false;
Can somebody help me - how to overcome the RegistrationsInfo missing field - error(in the stack trace) when activating the feature in the training site?
Thanks
Sathya

Hi Sathya,
Seems the field “RegistrationsInfo” is not been found when deploying with Event Receiver, a possible reason is that it might be damaged.
As a workaround, I suggest you retract the solution from your farm, make sure the “RegistrationsInfo” field is deleted using PowerShell, then create another project with the same
content and perform the deployment again.
About how to delete a field using PowerShell for your reference:
https://peterheibrink.wordpress.com/2011/12/09/powershell-delete-field-and-all-references/
http://www.sharepointfix.com/2011/04/powershell-script-to-delete-site.html
Feel free to reply if there any progress.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Registering business event definitions in soa infrastructure

Hi,
What do I need to do to register events into the soa infrastructure so components can publish and subscribe to them?
Everything I found was to create an empty composite, use the wizard to create new business event, add the event and save. But that does not register it in the soa infrastructure... when I go to Enterprise Manager | Business events --> there are not definitions....
What else needs to happen?
Any help greatly appreciated!

Events are only shown when there are subscribers to that particular event. What you also may consider is placing the event definition in the MDS. In this case you can reuse the event by just pointing to the shared metadata and event definitions aren't fragemented over several composites.
Regards,
Melvin

What are the options for integrating the event catalog and event landing pages in our website?

We'd like to integrate the event catalog and event landing pages into our website but would prefer not to use the standard iframe embed code. Are there other solutions available, like an API or something else?
Reason for this is that when we tried it with the iframe embed code the event catalog seems to load quite slow in a webpage on our website. Plus it seems we can't change the width and height of the event catalog with the CQ5 editor, or have the event catalog embed dynamically change in size depending on the amount of events in the catalog.

Keeping everything in one scene is the better way to go. Scenes are useful for animators who do not use navigation, they just make movies that play frame after frame without stopping. But for anything that involves navigating the timeline you will have less headaches if you just avoid them and keep everything in the one main timeline.
There are primarily two approaches to implementing pages in a timeline. Either spread them out along the timeline and navigate from frame to frame to access them, or create them as movieclips (all in the same frame) and manage their visibility. The latter approach makes it easier to maintain the status of a one page if navigating to another is necessary. And you might find it useful to mix these two approaches at times.
When you have everything on one timeline, you can have a layer dedicated to actionscript that you extend the full length of the timeline, which makes shareable code, such as variables and functions, available to anything along the timeline. This avoids any need to have duplicate function definitions since you can have the same single function available to multiple pages in the site. I usually use two actions layers... one for the shared stuff which has all code in frame 1 only, and another for frame specific code such as timeline commands and other action coding that needs to happen at particular frames.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

QT in html, events fired and movie internals doc

Hi,
The Javascript Scripting Guide says under "Executing JavaScript Functions From QuickTime", page 11:
Wired actions can be triggered by user interaction, as a result of a frame in the movie being displayed, or as the
result of arbitrary wired calculations.
It also briefly describes (page 23) the matrix and rectangle properties, saying "You can use a movie’s transformation matrix to scale, translate, and rotate the movie image. For details on the transformation matrix, see Movie Internals."
And the Rectangle is defined as "void SetRectangle(string rect)"
Where can I find the reference to the events fired by QT automatically ?
Where can I find this Movie Internals description ?
I'm not very familiar with javascript... That's not a QT issue, but where can I find a description of the rect ?
Many thanks
Jean-Pierre
Windows XP Pro

Yes, you can navigate to other pages using buttons/code in an swf file. And you can trigger an event as well, though I don't know if that's what you intended to say if navigating to another page is what you are really after.
In AS3, to make a button work with code, you need to add an event listener and event handler function for it. You might need to add a few (for different events, like rollover, rollout, clicking it, but for now we'll just say you want to be able to click it to get a web page to open. In the timeline that holds that button, in a separate actions layer that you create, in a frame numbered the same as where that button exists, you would add the event listener:
btn1.addEventListener(MouseEvent.CLICK, btn1Click);
The name of the unique function for processing the clicking of that button is specified at the end of the event listener assignment, so now you just have to write that function out:
function btn1Click(evt:MouseEvent):void {
   var url:String = "http://www.awebsite.com/awebpage.html";
   var req:URLRequest = new URLRequest(url);
   navigateToURL(req);

DFD diagram and ER crossmatrix for role definitions and role's privileges on objects

Hello,
Having the question on derivative use of combination of DFDs and ER diagrams ( let us be more fixes and focus on Relational model ).
In DFD there are defined external entities and functions, data flows and data stores that are forming processes.
Functions represents procedures, transactions, transformations.
Dataflows presents procedures parameters, intermediate reports, temporary table data, data that is passed , retrieved/written, signals, triggers/events that controle or trigger function...
Context of my question is focused on external entities.
External entity suppose to denote the sourced or destinationed system ( for example Archiving system ) or operator, system that is out of scope of the DFD and it is mentioned just as target or destination or source of dataflow or control flow.
In context of these understandings I am using external entitiy also for types of users of the system: staff that is triggering functions or schedulers or job managers, or reporting systems ( or components of reporting systems like for example business intelligence extraction processes ).
What is my problem that on basis of external entity definitions and E/R model also define roles and privilege classes for access to data objects.
And from those generating ddls for database roles, privileges on entitities to those roles.
But in privileges granting to role having two different kind of privileges on data objects:
- privileges that are granted on various schema objects
For example role1 has grant on tab1, view2, procedure1, package3,
- the other type of privilega is based on the scope or range of semantically defined scope or semantic area.
Semantic area is scattered through tables because of normalisation and using semantic area as entity of which primary key is
partitioning the table data through many semantic areas.
So this privilege should be granted on basis of the rows in table not column ( more semantically then structurally ...row oriented more than column ).
Both privileges that are granted to roles are also basis for functional roles
( privilege that is granted that functional role has grant to trigger or execute some function or process ).
My question is?
How do you handle modeling technology for analysis and design for role privileges and consolidation between database and functional roles ?
Grateful for any idea, experience and suggestions.

Hello,
Guess I was looking for the formal sequence of steps that would bring me to the
ddls for "create role ..." and "grant privileges to role".
You can do that.
1) I assume you have logical model and it's engineered to relational model, also you have data flow diagram created
2) You need to define information structures for flows connecting "Information store" to primitive process - attribute usage of particular entities should be defined for those "information structures" processed in flows
3) You need to define create, update and delete operation for flow going from primitive process to store - read is assumed in opposite direction
4) create a role in Process model and assign primitive processes to it - list of available processes to add depends on current data flow diagram
5) You need an open physical model for your relational model
6) Select "transfer process model roles to physical model roles" from context menu of top level DFD - select roles, relational and physical model there - roles with related permissions will be created in physical model
Entity1 is divided in several subtypes for different business areas.
And account manager for business_area1 is allowed to work on subtype1 ( view on prime table )...
Different implementation of entity hierarchies are not processed correctly in that wizard - i.e to get permissions to table corresponding to child entity - that entity should be used in information structure and flow.
Philip

How to do some actions between event received and event linked

Hi all!
Sorry my bad english :(
I want to review event data (to compare with process form by java method) after event received and correspondence found, but before it linked.
How could i do it?

Rajiv Dewan
You have to fetch data using SQL from RCD table.
See the tables related to Reconciliation RCD, RCE. There you'll get data.In this tables only service information about event, not reconciliation fields values.
This information i i can get from mapping.
Rajiv Dewan
You can make an entity adapter and get old data and new data.
Validate that and then send email.
If you don't get any old data it means it is Recon Insert Event then do nothing.I make entity adapter and assign it into pre-update.
I map my variables to all reconciliation fields and to process key.
Start reconciliation.
When reconciliation finished, user process form updated, but pre-update adapter does not invoke.
rajsunny
Is this your custom connector ? ? No, it's not custom connector, but later it will be actually for custom (if there are not chance to implement incremental reconciliation).
If Yes then just use the API ignoreEvent before generating the recon event. In that case, only if there are differences the OIM processes the recon event, otherwise it won't. Now put >your notification on the data object RCE.From OIM Javadoc:
OIM javadoc
boolean ignoreEvent(java.lang.String psObjName, java.util.Map poData)
It first tries to find a definitive account match, and then compares the account data with the record of it in Xellerate. If there is no difference between the data, it returns a true (indicating that the reconciliation event should not be raised). In all other cases, it will return false.
...When i invoke this method and it does not find a definitive account match, then return value is true.
As far as i understand it does not mismatch to javadoc, am i right?

Custom AS3 Component / Event Definition for MXML Tag

Custom AS3 Component / Event Definition for MXML Tag
Exposing custom event in custom MXML tag.
I have made an AS3 custom component named,
'CustomListComponent'.
Is a list type component extending UIComponent.
When an item is clicked (selected) I generate a custom event
named, 'selChange'
I want the user to be able to use this tag, define a handler
on the MXML tag.
I tried using metadata like [Event("selChange")] in the
component AS3 file with no luck.
Any help / examples to expose a custom event from an AS3
custom component to the MXML tag for the end user/developer would
help significantly.
Anyone? Thank you.

Well, That did not take long.
My mistake, Typo type.
[Event(nane="selChange", type="flash.events.Event")]
That is: naNe not naMe :(
Thank you all for your time and responses.
I WILL check my code more closely next time I post a
question.
P.S.: @VarioPegged : My code is big and not needed now. If
you would like it anyway just message me. TY

MRS and Capacity planning

Hello Experts,
Could anyone please provide me with definite comparison/difference between the Multi-Resource Scheduling MRS and Capacity planning?
Regards,
Amr

Please refer to the link below there is a big difference between MRS and SAP standard capaicity planning. Hopefully the attached link to the latest MRS PDF will help
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000377142010E
Jim

Loking for a Doc that has the definition of the calculations that used in Historical reports.What makes up Average Queue time?

Looking for a Doc that has the definition of the calculations that are used in Historical reports.
What metrics are used in Average Queue time?
What metrics are used in Average Speed of answer?

If you're on UCCE, the Reporting Guide and the Database Schema are fantastic resources.
http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-enterprise/products-user-guide-list.html
http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-enterprise/products-technical-reference-list.html
-Jameson

Upgraded to ios 7.1 battery drain is significant and have lost my calendar events. how do i get my events back and why am i losing so much power now?

how do i get my calendar events back and why the power drain after upgrading my operating system to 7.1?

Thought I'd reply to this seen as no one else has, I am also experiencing very similar problems with my 4s and by the looks of it is it's across all handsets. I've never had any battery issues with my iPhone even 7.0.6 was fine, but since updating to 7.1 the battery is ticking down very fast. I fully charged in the morning and left it in my locker all day at work when I got my hands on it it's gone down to 52% just on its own!!
I really hope they sort this out fast the irony is 7.1 was supposed to help battery life!

Shared DateVar in Subreport and datediff calculation in Main Report?

Hello experts,
I am using CRXI sp2. I have a report that contains two subreports for different dates in the same date field that are identified by a Service Code. The subreports have been placed in the same group footer 1a to be displayed and the calculation resides in the main report group footer 1b. The shared variables are as follows:
whileprintingrecords;
shared datevar Codedate5473;
Codedate5473:={@Codedate5473};
and
whileprintingrecords;
shared Datevar Codedate5623;
Codedate5623:={@Codedate5623}
The main report has the following calculation is in group footer 1a.
Whileprintingrecords;
Shared numbervar daysbetween;
if (isnull({@Shared 5623})or isnull({@Shared 5473})) then 0
else daysbetween:= datediff("d",{@Shared 5623},{@Shared 5473})
This returns negative numbers as well as calculations where one of the shared variables is null.
I reset the calculation in the report header as well.
Thanks for your help in advance.
Kevin

Hi Kevin,
I can reproduce your issue, As per my knowledge the crystal will make some issues in null value computation as well as shared variable computation
In your report i can see , you tried to access values from subreport to main report through shared variable. that will make problem. we can access values from main report to subreport without any issue using shared..dont ask me the reason..i am not the right person to say that... lol.
The another wrong thing i was found in your formula is , you are not resetting the shared variable any where.. so once the date field is null, the shared variable returning the previous value.
So this is the solution for you..
1,You have to add one more subreport for displaying your result., Lets say 'Sub report3'
and create a formula, like.(Same which you have write before for the result)
shared datevar Codedate5473;
shared Datevar Codedate5623;
numbervar daysbetween;
WhilePrintingRecords;
daysbetween:= datediff("d",Codedate5473,Codedate5623);
daysbetween;
2, Re- write your first two formulas like this
For Subreport1,
WhilePrintingRecords;
shared dateVar Codedate5473;
if isnull({Codedate5473}) then
Codedate5473:=date(0,0,0)
else
Codedate5473:=date({Codedate5473});
For subreport2
WhilePrintingRecords;
shared dateVar Codedate5623;
if isnull({Codedate5623}) then
Codedate5623:=date(0,0,0)
else
Codedate5623:=date({Codedate5623});
Hope this will works for you,
Cheers,
Salah.
Edited by: salahudheen muhammed on Aug 7, 2009 1:05 PM

Reg Capacity used and capacity available

Dear all,
How can I see the capacity available and capacity used for a particular resource for previous month , is there any standard report available in standard SAP.
Regards
madhav

Try transaction MCP7

Event definition and capacity calculation

Similar Messages

Maybe you are looking for