Event generated when swf had been loaded

Hi,
I ve been searching for this but nothing. I need to use an event generated when the site is loaded for the very first time (to manage the resize of the stage). That's beacuse the event "resizestage" is generated only when i resize it, so the first time the site had been loaded, the size is not modified.
Is there anything?

So adding the ENTER_FRAME makes sense to me. Assuming your website is one frame long? How many frames are in your "main" timeline?
This function says simply:
1) When you enter the first frame go to the "loading" function
2) Get the total bytes of the file loading
3) Also get the number of bytes currently loaded.
4) If the total bytes is equal to the bytes that are loaded
5) Remove the eventListener so it doesn't keep getting called
6) Then do your stage resizing or call another function.
function loading(e:Event):void {
(2)  var total:Number=this.stage.loaderInfo.bytesTotal;
    (3) var loaded:Number=this.stage.loaderInfo.bytesLoaded;
    (4) if (total==loaded) {
          (5)    this.removeEventListener(Event.ENTER_FRAME, loading);
(6) // do your resizing once the .swf file is loaded
     // or call another function
(1)     this.addEventListener(Event.ENTER_FRAME, loading);
Also, wouldn't you want to do this with a loader scene?

Similar Messages

  • E-mailing users when data has been loaded.

    Does anyone have some information on setting up FDM to e-mail certain users when data has been loaded for certain locations? Not sure what steps need to be taken to setup the FDM server, FDM and just wondering if there are any generic scripts that can be used.

    You would need to write a custom script to do this. You can use the E-mail Accelerator to do this, and it would need to be included in an event that fires after load.

  • HT4436 Just received an email from iCloud stating that my free upgrade was going to expire and decrease to 5, when I had been using 10+. What is this??

    I just received an email from icloud stating that my free upgrade was going to expire and it would decrease to 5 (when I have been using 10+). What is this??

    The actual amount of extra free storage varies depending on how much storage previous subscribers had.
    If you do nothing your storage will dowgrade to 5GB so you should make sure you don't have more content than this.
    If you want to continue with the increased storage by paying for it, please see
    http://support.apple.com/kb/HT5527
    and expand 'How do I purchase my current plan?'.

  • "Presave" Event triggered when the form is loaded.

    Dear all,
    I created an interactive form with an XML interface and I use it into a Web Dynpro ABAP.
    The version of my Adobe LiveCycle Designer is 8.0.
    My problem is that the "presave" event is triggered when the form is loaded.
    For example, if I place a field in the form and add the script " this.rawValue = "123"; " to the "presave" event of this field, the field will have the value "123" when I launch the Web Dynpro application.
    Then, if the user does not make any input and directly save the form, the "presave" event is not triggered.
    Does anyone know why I get such a behavior?

    Steeven, I was unable to test this scenario as Adobe Credentials are not installed in my system. But something similar from Java Script is referenced here in the below mentioned link.
    Please look if you find it useful:
    http://careerabap.blogspot.ca/2011/02/custom-dialog-box-message-while-saving.html
    Please reward if you find it useful.
    Regards,
    Nitin.

  • Event Handling when EditText has been filled

    I'd like to call some code after an EditText has been filled.  But I'm having a little trouble figuring out which events I need to watch.
    The tricky part (it seems) is that I need to catch the event any time data is added to or changed in the EditText.  This includes anytime SBO changes the data as well (which means the EditText may not get/lose focus).
    Anyone do something like this?  Or have an alternative?
    It's the Item field (uid = 33) on the Service Call form (form type = 60110).

    Hi,
    U can do it at Validate after action event by code
    if(pVal.FormType==60110 && pVal.ItemUID=="33" && pVal.ItemChanged==true)
    //Write ur own code ,whatever u want
    Hope u will get help...
    Regards,
    Lalit Narayan

  • CS6 is opening Autorecovery file even when program had been shut down properly

    I have successfully saved my file, shut down Photoshop without incident, and yet upon opening  CS6 it starts opening the latest autorecovery file. I need to have autorecovery on for the work loss protection it provides, but it can get confusing to have an Autorecovery file open instead of the file I had meant to open. ( This is also happening on a colleague's computer.)
    I'm running Mac OS X version 10.8.3
    2x2.66 GHz 6-Core Intel Xeon
    64 GB 1333 MHz DDR3
    CS6 Version 13.0.4
    It's happened several times with a variety of files. They are all Grayscale layered PSB's, in the 1.5 - 3 GB range.

    It should delete the file when PS is closed but computers don't always act rational.  Go into the autorecovery file location and delete file.  It should a a folder on your scratch disk.

  • How to stop page download and to continu it than without loosing what had been loaded

    I want the page information will be saved/ It is very lage. Internet connection is bad. I need to stop page download with saving of what is already download and to continue the page download.
    Thank you for help

    I don't know of a way to pause and resume the page load.
    Maybe this extension works.
    *Read It Later: https://addons.mozilla.org/firefox/addon/read-it-later/
    I don't know if you can pause the download with this extension, so you have to try that yourself.

  • How to register when it had been registered previously?

    I have bought a Mac Pro that included the CS5.5 production premium software - all boxed with serials etc.
    I would like to register it in my name but when i do, adobe site states that it's already registered and can't be registered to more than one person.
    Unfortunatley, i am unable to contact the original owner.
    Is there anything i can do?

    Transfer an Adobe product license
    For anything beyond that, contact support. I'm sure if you provide proof of purchase they can handle things.
    Mylenium

  • Does UITableView have a callback for when it is done loading ALL cells?

    I find it very diffcult to change UIActivityIndicator on and off for data loading into a table. I set it on and then call "reload data" on my tableView and then turn it back off. I dont think that is correct, because reload data will return immediately, it doesnt block until al the data is loaded correct? So a better way it to check for a callback when all the cells are loaded?
    How are you guys doing this?

    The table isn't going to load all cells anyway.
    Say you have a 100-item table of which 6 cells are visible at a time. The table view will only use tableView:cellForRowAtIndexPath: to create 6 or 7 cells.
    Later on, if the user scrolls, the table view will call tableView:cellForRowAtIndexPath: some more, for the newly visible cells.
    If the table view held on to every cell once it had been loaded, more and more cells would gradually get allocated until all 100 cells were in existence and holding data. That would use up a lot of memory. (What if the table has 10,000 cells?)
    If the table view did the standard thing of calling \[release\] on a cell as soon as it didn't need it, memory wouldn't get used up but a lot of time would be wasted allocating and deallocating.
    So the table view has a list of "cells I have but don't really want". When they encourage you to call dequeueReusableCellWithIdentifier: in your tableView:cellForRowAtIndexPath: routine, they're effectively saying "when the table is asking you for a cell for a given table entry, ask the table if it's got any unwanted cells to give you, before you go off and allocate a new one".
    As far as your question is concerned, this means that the table never really finishes loading. It'll only load 6 or 7 cells at a time, and when the user scrolls, it'll load some more. Depending how you've written tableView:cellForRowAtIndexPath:, it may only ever have 6 or 7 cells in memory at a time.
    It all depends what you want. If you want your activity indicator to say "I am working on giving you a display but what you see on the screen isn't what you're ultimately going to get", then
    (1) Get each individual cell to start its filling-itself-with-visible-data process when you allocate/reuse the cell in tableView:cellForRowAtIndexPath:. Give the cell a unique visible appearance when you do this. When the load process is complete, get the cell to call setNeedsDisplay so that it can get repainted with the real data. The user's experience will be of a table that appears instantly, each cell with an activity indicator in it, and the activity indicators then disappear as soon as each cell finishes its work. It will look rather nice.
    Or (2) do much the same, but get each cell to increment a global "loads in process" counter when it is born/reborn, and decrement it when its data have arrived. Then use that global counter to control a single UIActivityIndicator.
    The key in both cases is for cell creation to be fast, and the actual loading of data to the cells (if it's slow) to be done separately.

  • I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load

    I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load in the edit Projects window.  I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
    I have contacted apple support and they tried to do a few things... to no available.
    With my limited knowledge of file structures I assume that the header file must be corrupt.
    Is there a 3rd party utility that can decompile and fix the file structure so it will load properly.  I've been working on this project since june and would hate to have to redo the whole thing again.

    I had just put the finishing touches on my 36 minute documentatary when I got an error message that the external 1TB HD I was using to store the project had been ejected improperly (must have shaken a cord).  The result is that the project would not load in the edit Projects window.  I can see the file in the finder window and it will launch iMovie but the file itself will not load in the projects window.
    I have contacted apple support and they tried to do a few things... to no available.
    With my limited knowledge of file structures I assume that the header file must be corrupt.
    Is there a 3rd party utility that can decompile and fix the file structure so it will load properly.  I've been working on this project since june and would hate to have to redo the whole thing again.

  • I have a ipod touch 5 and when i was loading it up to my computer i chose to restore my last ipod, which had no camera. After all my music was loaded all of my photos i had taken with my ipod had been deleted. Is there any way i could get photos back?

    I have a ipod touch 5 and when i was loading to my computer i chose to restore my data from my last ipod which did not have a camera. Then after all my music was uploaded i noticed that all the pictures i had taken on my new ipod had been deleted. I think it may be because i chose to restore my last ipod which no photos on it. I was wondering if there is any way to restore my lost photos?

    If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
    iOS: How to back up
    Also, if yoo have that backup you can extract the photos by:
    Recover iPhone, iPad or iPod photos from backups with Picturescue
    If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

    My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.  
    Can not load the Organizer from the icon at the bottom of  Editor screen, from the icon on the MacBook Air dock (OS 10.10.2),  nor from the file in applications located with Finder.
    I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences.  I have searched on line for other options but not  found any. 
    Can you help me?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

    I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

    Most people have no problems with installing firefox as an upgrade, but there are quite a few things that can cause problems. Please have a look at the articles
    * [[software Update Failed]] <-- clickable link (blue ) --
    * [[firefox will not start]]
    * [[firefox does not work]]
    Post back after you read them and say what you tried. Have you ensured you used an admin account, possibly needing to check the UAC setting, and that security software is not blocking the changes. You should certainly try starting in firefox's [[safe mode]] either from a menu/icon option or by holding the shift key as you attempt to run firefox.
    Is the browser icon you see on the desktop, and a firefox icon ?

  • TS3899 I was deleting my emails when all of a sudden it started loading emails that had been put in trash and then deleted. I'm up to 1364. How do I get this to stop and how do I get rid of all these emails?

    I was deleting emails on my iPad to trash , when 1364 past emails which had been sent to trash and was deleted was back in my inbox. I can't get this to stop. When I try to delete some emails it just adds more. Could someone tell me what has happened and how do I fix this problem?

    "Other" represents data that iTunes can't recognize.  A few hundred mb of other is normal.  The 6.9 gb you have represents corrupted data (maybe from an interrupted sync or some other glitch).
    Sometimes, syncing one more song can clear up the extra other.  If not, you'll need to restore your iPod.  Here are the instructions:  Restore:  http://support.apple.com/kb/HT1414
    You can restore from your iPod backup when asked.

  • HT5129 I had photos from MobileMe organized into different events.  When iPhoto made a MobileMe event, it took all of those photos out of the other events and put them all together in the new "from MobileMe" event.  Is there any way to reverse this?

    I had photos from MobileMe organized into different events.  When iPhoto made a MobileMe event (when MobileMe ended), it took all of those photos out of the other events and put them all together in the new "from MobileMe" event.  Is there any way to reverse this?

    Only to load your backup from before downloading the MM photos
    LN

Maybe you are looking for

  • WHY I CAN'T OPEN MY SCRIPT?

    I have been working on my script for several months in Adobe Story Free with no problem, but this week I can not open it at all.  I can't even see it listed.  I only ever access it on one computer and it has never been a problem before. Can someone p

  • No text shown in ALERT-Message in RWB-Inbox and via eMail

    Hi, we configured Alerting in XI giving conatiner elements in the title and long and short texts like &SXMS_ERROR_CAT& (actually we put all inside for testing purposes!). But when receiving the error message via eMail or in Alert-Inbox we only receiv

  • Cash credits on purchase orders

    I am creating a purchase order for mulitple items of software including 1 bulk discount or credit item.  How do I enter this discount item in the PO?

  • Flash is in front of a css menu where wmode="direct"

    Hello, Flash Player is always in front of a css menu where wmode="direct" Thanks

  • Plugin 1.3.1_02 won't cache my jars

    I have an unsigned applet application packaged as 3 jars. I'm using the 1.3.1_02 plugin, IE 5.5, Weblogic 5.1. Below is the html OBJECT tag used to launch my applet. <OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"      width="100%" heigh