EVENT ID 30011 Error: 85 (Timeout) ReplicationType:LocalRegistrarReplication Source: LS User Replicator
when we are trying to move Lync users between two pools in the same site we received error that the move operation has been failed because the user is not provisioned.
we have two lync 2013 servers (windows 2008 R2) and SQl 2012 SP2
In event viewer we have noticed the below replication error
Event ID 30011
"Encountered an unrecognized error while processing objects from a domain. This error caused User Replicator to abort synchronization of this domain. Synchronization will be retried for this domain.
If this domain is not enabled for Lync Server, then this error can be ignored.
Domain: **.*** (DN: DC=**,DC=**) Error: 85 (Timeout) ReplicationType:LocalRegistrarReplication
Cause: The cause for this error can vary. Please review the errors listed above.
Resolution:
Contact support services if the error is not descriptive enough to remedy the problem."
Best Regards, Fadi.F.Haddad
HI
I think you have several issues, First can you check weather you lync server is synced with Domain. this could be some stale entries of domain which may be deleted or created for testing purpose.
Can you run this command from Lync FE: Get-CSUserReplicatorConfiguration and see the domains are listed.
You can probably deleted if some unwatented.
If you want o add the domains which you cannot find in the list
Set-CsUserReplicatorConfiguration -Identity global –ADDomainNamingContextList @{add=”dc=Zubi, dc=local”}
Set-CsUserReplicatorConfiguration -Identity global –ADDomainNamingContextList @{remove=”dc=Zubi, dc=local”
you can also check basics weather you DNS is replicating between domain and all of you front end server.
Regards
Zahoor
Similar Messages
-
Event ID 1058 Error Code 1326 Logon Failure; unknown user name or bad password
I am attempting to apply a group policy to a group of computers and I will get this event ID and error code generated. I can unc to the gpt.ini file. What can I do to resolve this problem? My structure is like this: I have a 2003
R2 DC located at site A (and this computer WIN7 is also located at site A) and I also have other 2003 DC's located at remote offices (across WAN links). This computer seems to be wanting to apply the GPO from one of the remote office DC's as opposed
to the local DC that is much closer - how can I change how GPO is processed on this computer?I have two Domain Controllers Main ( Main DC Win 2012) and Second DC Win 2008.
the date of some policies is not out of date....
please check these files to know the problem.
dcdiag.txt output:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine ASMDC, is a Directory Server.
Home Server = ASMDC
* Connecting to directory service on server ASMDC.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=buc,DC=edu,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 2 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ASMDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... ASMDC passed test Connectivity
Testing server: Default-First-Site-Name\BSMDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... BSMDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ASMDC
Starting test: Advertising
The DC ASMDC is advertising itself as a DC and having a DS.
The DC ASMDC is advertising as an LDAP server
The DC ASMDC is advertising as having a writeable directory
The DC ASMDC is advertising as a Key Distribution Center
The DC ASMDC is advertising as a time server
The DS ASMDC is advertising as a GC.
......................... ASMDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... ASMDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... ASMDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... ASMDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... ASMDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
......................... ASMDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC ASMDC on DC ASMDC.
* SPN found :LDAP/ASMDC.buc.edu/buc.edu
* SPN found :LDAP/ASMDC.buc.edu
* SPN found :LDAP/ASMDC
* SPN found :LDAP/ASMDC.buc.edu/BUC
* SPN found :LDAP/5e88f85b-15a6-4ff5-b0fd-6df748df06fd._msdcs.buc.edu
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e88f85b-15a6-4ff5-b0fd-6df748df06fd/buc.edu
* SPN found :HOST/ASMDC.buc.edu/buc.edu
* SPN found :HOST/ASMDC.buc.edu
* SPN found :HOST/ASMDC
* SPN found :HOST/ASMDC.buc.edu/BUC
* SPN found :GC/ASMDC.buc.edu/buc.edu
......................... ASMDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC ASMDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=buc,DC=edu
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=buc,DC=edu
(Configuration,Version 3)
* Security Permissions Check for
DC=buc,DC=edu
(Domain,Version 3)
......................... ASMDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\ASMDC\netlogon
Verified share \\ASMDC\sysvol
......................... ASMDC passed test NetLogons
Starting test: ObjectsReplicated
ASMDC is in domain DC=buc,DC=edu
Checking for CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
......................... ASMDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=DomainDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Schema,CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
......................... ASMDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 8604 to 1073741823
* ASMDC.buc.edu is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 7604 to 8103
* rIDPreviousAllocationPool is 7604 to 8103
* rIDNextRID: 7640
......................... ASMDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... ASMDC passed test Services
Starting test: SystemLog
* The System Event log test
An Warning Event occurred. EventID: 0x825A0024
Time Generated: 08/21/2014 00:22:16
Event String:
The time service has not synchronized the system time for 86400 seconds because none of the time service providers provided a usable time stamp. The time service will not update the local system
time until it is able to synchronize with a time source. If the local system is configured to act as a time server for clients, it will stop advertising as a time source to clients. The time service will continue to retry and sync time with its time sources.
Check system event log for other W32time events for more details. Run 'w32tm /resync' to force an instant time synchronization.
An Warning Event occurred. EventID: 0x8000000E
Time Generated: 08/21/2014 00:32:29
Event String:
There were password errors using the Credential Manager. To remedy, launch the Stored User Names and Passwords control panel applet, and reenter the password for the credential BUC.EDU\administrator.
An Error Event occurred. EventID: 0x00000422
Time Generated: 08/21/2014 00:32:29
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\buc.edu\sysvol\buc.edu\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not
successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... ASMDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=ASMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
The system object reference (serverReferenceBL)
CN=ASMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
and backlink on
CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
......................... ASMDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Testing server: Default-First-Site-Name\BSMDC
Starting test: Advertising
The DC BSMDC is advertising itself as a DC and having a DS.
The DC BSMDC is advertising as an LDAP server
The DC BSMDC is advertising as having a writeable directory
The DC BSMDC is advertising as a Key Distribution Center
The DC BSMDC is advertising as a time server
The DS BSMDC is advertising as a GC.
......................... BSMDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... BSMDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... BSMDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BSMDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... BSMDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Domain Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role PDC Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Rid Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
Role Infrastructure Update Owner = CN=NTDS Settings,CN=ASMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
......................... BSMDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC BSMDC on DC BSMDC.
* SPN found :LDAP/BSMDC.buc.edu/buc.edu
* SPN found :LDAP/BSMDC.buc.edu
* SPN found :LDAP/BSMDC
* SPN found :LDAP/BSMDC.buc.edu/BUC
* SPN found :LDAP/93561cab-4fb3-421f-9a67-af6b4c280eca._msdcs.buc.edu
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/93561cab-4fb3-421f-9a67-af6b4c280eca/buc.edu
* SPN found :HOST/BSMDC.buc.edu/buc.edu
* SPN found :HOST/BSMDC.buc.edu
* SPN found :HOST/BSMDC
* SPN found :HOST/BSMDC.buc.edu/BUC
* SPN found :GC/BSMDC.buc.edu/buc.edu
......................... BSMDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC BSMDC.
* Security Permissions Check for
DC=ForestDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=buc,DC=edu
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=buc,DC=edu
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=buc,DC=edu
(Configuration,Version 3)
* Security Permissions Check for
DC=buc,DC=edu
(Domain,Version 3)
......................... BSMDC passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\BSMDC\netlogon
Verified share \\BSMDC\sysvol
......................... BSMDC passed test NetLogons
Starting test: ObjectsReplicated
BSMDC is in domain DC=buc,DC=edu
Checking for CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu in domain DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu in domain CN=Configuration,DC=buc,DC=edu on 2 servers
Object is up-to-date on all servers.
......................... BSMDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=DomainDnsZones,DC=buc,DC=edu
Latency information for 1 entries in the vector were ignored.
1 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Schema,CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
CN=Configuration,DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
DC=buc,DC=edu
Latency information for 5 entries in the vector were ignored.
5 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency
information (Win2K DC).
* Replication Site Latency Check
......................... BSMDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 8604 to 1073741823
* ASMDC.buc.edu is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 8104 to 8603
* rIDPreviousAllocationPool is 8104 to 8603
* rIDNextRID: 8106
......................... BSMDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BSMDC passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:15
Event String:
Driver Send To Microsoft OneNote Driver required for printer Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:18
Event String:
Driver SolidPDF XChange required for printer SolidPDF XChange is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:18
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!net_pc5!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:19
Event String:
Driver Send To Microsoft OneNote Driver required for printer !!BUCLAPTOP1!Send To OneNote 2007 is unknown. Contact the administrator to install the driver before you log in again.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:20
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An Warning Event occurred. EventID: 0x80000008
Time Generated: 08/20/2014 23:52:20
Event String:
The jobs in the print queue for printer Microsoft XPS Document Writer (redirected 2) were deleted. No user action is required.
To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
Advanced tab, and then clear the Log spooler warning events check box.
An Warning Event occurred. EventID: 0x80000004
Time Generated: 08/20/2014 23:52:20
Event String:
Printer Microsoft XPS Document Writer (redirected 2) will be deleted. No user action is required.
To stop logging warning events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click the
Advanced tab, and then clear the Log spooler warning events check box.
An Warning Event occurred. EventID: 0x80000003
Time Generated: 08/20/2014 23:52:20
Event String:
Printer Microsoft XPS Document Writer (redirected 2) was deleted, and users will no longer be able to print to this printer. No user action is required.
To stop logging information events for the print spooler, in Control Panel, open Printers, right-click a blank area of the window, click Run as Administrator, click Server Properties, click
the Advanced tab, and then clear the Log spooler information events check box.
An Error Event occurred. EventID: 0x00000457
Time Generated: 08/20/2014 23:52:22
Event String:
Driver NRG SP 3400N PCL 6 required for printer !!BUCLAPTOP1!NRG SP 3400N PCL 6 (Copy 1) is unknown. Contact the administrator to install the driver before you log in again.
......................... BSMDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BSMDC,OU=Domain Controllers,DC=buc,DC=edu and backlink on
CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
The system object reference (serverReferenceBL)
CN=BSMDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=buc,DC=edu
and backlink on
CN=NTDS Settings,CN=BSMDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=buc,DC=edu
are correct.
......................... BSMDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : buc
Starting test: CheckSDRefDom
......................... buc passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... buc passed test CrossRefValidation
Running enterprise tests on : buc.edu
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
PDC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
Time Server Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
KDC Name: \\ASMDC.buc.edu
Locator Flags: 0xe00013fd
......................... buc.edu passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... buc.edu passed test Intersite
====================================================================
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\ASMDC
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 5e88f85b-15a6-4ff5-b0fd-6df748df06fd
DSA invocationID: 1355f657-cd24-4ad4-b890-f04f5c624acd
==== INBOUND NEIGHBORS ======================================
DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:43:56 was successful.
CN=Configuration,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:41:11 was successful.
CN=Schema,CN=Configuration,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-20 23:51:37 was successful.
DC=DomainDnsZones,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-21 00:45:39 was successful.
DC=ForestDnsZones,DC=buc,DC=edu
Default-First-Site-Name\BSMDC via RPC
DSA object GUID: 93561cab-4fb3-421f-9a67-af6b4c280eca
Last attempt @ 2014-08-20 23:51:37 was successful.
Regards and thanks in advance
Mhiar -
UPSA Errors, SQL Errors, Timeouts, Event ID 3, Event ID 3355
Greetings,
My User Profile Service has been running without issue for the last week or so; once I was able to provision it.
Yesterday morning, we noticed it was in a "User Profile Sync is not currently provisioned" state.
I went through the normal steps to start the service and after 15 minutes it stopped again. The certifications are there, I saw the 2 Forefront services start, then I saw a number of errors being logged. Then, of course, the sync service stopped.
I am investigating the errors logged I see many Event ID 3; SQL timeout. I am familiar with how to increase the Forefront timeout configuration but am wondering if the issue is something deeper.
This is a small 3 server farm; 01 - Application Server (Central Administration), 02 - Dedicated Search Server, 03 - WFE.
The UPSA and sync is configured to run on 03. However, when I look at failed timer jobs, I see the "User Profile Service - User Profile Incremental Synchronization" job failing on both servers 01 and 03. These jobs are running every
minute and have thousands of failures.
Why would this job be running on 01? I have never scheduled it to run on the 01 server?
I'm not sure if this is related, but I also see intermittent Event ID 3355 in the logs. This event indicates the following:
"Cannot connect to SQL Server. {Our SQL Server} not found. Additional error information from SQL Server is included below.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Table 'TimerJobHistory'. Scan count 1, logical reads 4, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0."Hi Bob,
I recommend to check if the User Profile Synchronization Service has been started in both 01 server and 03 server.
If yes, then User Profile Service - User Profile Incremental Synchronization timer job will run on both 01 server and 03 server.
For this issue, I recommend to reset the user profile synchronization and reboot the 01 and 03 sever after the reset, add the Farm account on Sync DB as dbo owner on SQL server and then start the profile synchronization server to check the results.
https://technet.microsoft.com/en-us/library/ff681014.aspx?f=255&MSPPError=-2147217396#resetSync
http://blogs.technet.com/b/balasm/archive/2012/05/18/user-profile-application-unable-to-process-create-message.aspx
As you said that the User Profile Service - User Profile Incremental Synchronization is failing in 01 and 03 server, what was the error message displayed when viewing the failing timer job in Job History?
I also recommend to check ULS log to see if anything unexpected occurred.
For event 3355, please refer to the link below for resolution:
https://technet.microsoft.com/en-us/library/ee513066%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected].
Hi Victoria,
I did resolve the issue with the UPSA Synchronization Service failing to run; it was a SQL Server error. SQL Server was actually running out of memory. My client added an additional 12GB memory and these specific errors went away.
What I'm still questioning is; why is a synchronization timer job even trying to run on the 01 server. The UPSA synchronization job was provisioned on the 03 server only and it is running now. However, I still see the UPSA synchronization timer
job failing on the 01 server.
This is a production environment. Tearing the UPSA down and rebuilding it is not an option. I just need to get the UPSA synchronization timer job to stop running on the 01 server.
Thank you!
Bob -
VB Runtime error timeouts. Could not fetch terms from table: TPW6
VB Runtime error timeouts are occurring repeatedly for multiple users on the terminal server.
Event Type: Warning
Event Source: VBRuntime
Event Category: None
Event ID: 1
Description: The VB Application identified by the event source logged this Application XL Reporter: Thread ID: 13508 ,Logged: Could not fetch terms from table: TPW6
It looks like bad table reference in XL reports? This is causing significant lag as they wait to time-out. Is there a way to identify source(s) and correct it/them? Unfortunately the error does not say what report. Is there any way of identifying exactly what the SAP equivalent is to the tables it is having issues finding?
thanksThis error may not cause big problems. We have to live with it for a long time. It only show XLR with highlight icon on the task bar. It shouldn't have much bigger impacts.
Thanks,
Gordon -
Error during analysis of source code
Hi,
I am trying to add a field to the search criteria and i have followed the steps as given in the cook book. I am stuck at a point where on trying to add the custom field to the existing code i get an error message - "Error during analysis of Source code". This pop up comes at the end of the wizard.
I also tried to create a new context node but at the end of the wizard i get the pop up and the same message inside.
I searched in SDN and found out that this error could occur if the context node class is not active. In my case, all the three classes : Controller , context and context node class are active.
Could some one throw some light as to why this error message occurs?
Regards,
VenkatHi Experts,
I'm also getting a similar error but at the time of creating a new event. All the classes are active without errors.
How do we resolve this.
Appreciate your help.
Regards,
Sandeep -
Hello,
I am calculating the value for the barcode (3 of 9) using JavaScript to generate a non-interactive PDF. On the Adobe Sever (ES LC 8.2), after running for 5 hours, I am experiencing script timeout error while calculating the barcode on the first page of every document that is getting processed. If I restart the Adobe server every thing is fine until the server hits the threashold of 5 hours.
This only happens for the first page of every document, so if there are 10 pages then barcode gets calculated correctly from the second page. Very unusual behavior.
Below is the exception,
[5/25/10 20:30:25:976 EDT] 00000036 XMLFormServic W com.adobe.service.ProcessResource$ManagerImpl log ALC-XTG-102-001: [340010] Error: Timeout
[5/25/10 20:30:25:987 EDT] 00000036 XMLFormServic W com.adobe.service.ProcessResource$ManagerImpl log ALC-XTG-102-001: [340010] Script failed (language is javascript; context is xfa[0].form[0].rcx[0].#pageSet[0].pageMain1[4].Code3of9BarCode1[0])
Appreciate your help on this.
Thanks,
Laxman.Both are valid behaviors unfortunately.
1) login portlet is showing up in specific portlet b/c inline navigation allows for you to create and load pages without affecting the overall portal.
This happens when you use iframes (which behave in a similar fashion).
- your only workaround is really to write some javascript function to "listen" to the portal login page getting loaded and then throwing the session into the parent browser (which is Portal). At least this is the only solution that I ever came up with when using Iframes.
2) Don't know about out of memory error actually, but getting the "gatewy was not able to access requested content" is valid b/c the session died.
- javascript errors require javascript solutions. Sorry I couldn't be more helpful than that.
Maybe someone else will have better suggestions.
The other suggestion is to use your app server to listen to the logout event and redirect appropriately to somewhere else, or have it do what you want it to do in situations as this. -
Loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
Hi,
Facing problem with master data object while loading and with error message :COLLECTION in SOURCE SYSTEM ENDED
This load is getting failed every day. It is a full load and records are getting transferered and added.
when we check in details tab in RSMO all data packets in processing is green but in extraction some of the data selection scheduled are in yellow.We are changing QM status to green as records are added.
Version i am using is BW 3.5
Please let me know what will be the problem???
Thanks,
Edited by: lokesh thonsyd on Feb 18, 2009 8:55 AMFirst try to find out the reason for the load failure. Once you fix this, do a manual run of the infopackage and when successful you can continue with the rest of process chain.
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end. -
SSL. Error: Timeout occurred whilst retrieving page meta data
Hi!
I am configuring oracle 9iAS 1.0.2.2a Portal to enable SSL and I did
everything that was said at http://igloo.its.unimelb.edu.au/Webmail/tips/msg00569.html
zone.properties
servlet.page.initArgs=useScheme=http
servlet.page.initArgs=usePort=7778
servlet.page.initArgs=httpsports=4443
wdbsvr.app
[DAD_portal30]
cgi_env_list = REQUEST_PROTOCOL=HTTPS,SERVER_PORT=4443
[DAD_portal30_sso]
cgi_env_list = REQUEST_PROTOCOL=HTTPS,SERVER_PORT=4443
This was my ssodatan
ssodatan -w https://me.me.me:4443/pls/portal30/ -l
https://me.me.me:4443/pls/portal30_sso/ -s portal30 -o portal30_sso
But when I access https://me.me.me:4443/pls/portal30/ I get
Error: Timeout occurred whilst retrieving page meta data
However, https://me.me.me:4443/pls/portal30_sso/ is working fine!
One more thing. I can access my login server at
http://me.me.me:7778/pls/portal30/ and when it prompts for username and password
it uses https.
https://me.me.me:4443/pls/pors/portal30_sso.wwsso_app_admin.ls_login
Help would be greatly appreciated!jserv.log (these lines appear many times)
[28/06/2002 17:07:03:987 GMT+03:00] page/JNI: Exception when trying to connect in 0.
[28/06/2002 17:07:03:987 GMT+03:00] page/Timeout occurred, label=page url=https://me.me.me:4443/pls/portal30/!PORTAL30.wwpob_page.show?_pageid=51
[28/06/2002 17:07:03:987 GMT+03:00] page/ContentFetcher Unexpected Exception, name=content-fetcher3
javax.net.ssl.SSLException: SSL handshake failed: X509CertChainIncompleteErr
at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Native Method)
at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
at HTTPClient.HTTPConnection.getSSLSocket(HTTPConnection.java, Compiled Code)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java, Compiled Code)
at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java, Compiled Code)
at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:3545)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:2478)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:2605)
at oracle.webdb.cache.CacheHTTPConnection.getHTTPResponse(CacheHTTPConnection.java:129)
at oracle.webdb.cache.CacheHTTPResponse.process(CacheHTTPResponse.java, Compiled Code)
at oracle.webdb.cache.CacheHTTPConnection.common(CacheHTTPConnection.java:114)
at oracle.webdb.cache.CacheHTTPConnection.Post(CacheHTTPConnection.java:210)
at oracle.webdb.page.ContentFetcher.run(ContentFetcher.java, Compiled Code)
Changes to httpd.conf
<IfDefine SSL>
Port 4443
Listen 4443
</IfDefine>
<VirtualHost default:80>
</VirtualHost>
<VirtualHost default:4443>
DocumentRoot "/oas/Apache/Apache/htdocs"
ServerName me.me.me
ServerAdmin [email protected]
ErrorLog /oas/Apache/Apache/logs/error_log
TransferLog /oas/Apache/Apache/logs/access_log
SSLCertificateFile /oas/Apache/Apache/conf/ssl.crt/mycert.crt
SSLCertificateKeyFile /oas/Apache/Apache/conf/ssl.key/mycert.key
</VirtualHost> -
Event ID: 10830 errors in our RMS server.
Hi
We are getting Every hour 6 to 7 Event ID: 10830 errors in our RMS server. Help us to resolve this issue.
Event Type: Error
Event Source: Health Service Modules
Event Category: None
Event ID: 10830
Date: 10/27/2011
Time: 4:08:05 AM
User: N/A
Computer: IND-APP142
Description:
An alert couldn't be inserted to the database. This could have happened because of one of the following reasons:
- Alert is stale. The alert is generated by an MP recently deleted.
- Database connectivity problems or database running out of space.
- Alert received is not valid.
The following details should help to further diagnose:
Details: RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database "OperationsManager",
table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database
"OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database
"OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated.RuleId:8654b44b-a532-3e3a-19be-1d4a66e9f790. HealthServiceId:e840b3ad-86d3-d373-1970-4c8b39f171c2. The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Alert_BaseManagedEntity". The conflict occurred in database
"OperationsManager", table "dbo.BaseManagedEntity", column 'BaseManagedEntityId'.
The statement has been terminated..
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Regards Donald D'souza http://donald-scom.blogspot.com/Hi
I am able to find out from which agent this error is causingby the below command
get-monitoringobject -id HealthServiceId
I have followed the below steps to resolve the ssue
1. Stopped the Health service
2. Deleted the Health Service State Folder
3. Started the Health service
Still the issue was not fixed. This error is coming from a Domain controller. The agent pointing to the gateway server so i have followed the same above steps on the gateway server but still the issue not resolved. Then I have restarted the SDK,
Config and Health Service on the RMS server but still I am getting the error.
Help us on this.
Regards Donald D'souza http://donald-scom.blogspot.com/ -
I have a Windows 2012 server backing up with NovaBackup to a Buffalo NAS.
Every time a Backup goes off I get this error
Log Name: System
Source: Ntfs
Date: 4/3/2015 9:00:57 AM
Event ID: 137
Task Category: (2)
Level: Error
Keywords: Classic
User: N/A
Computer: HMFS1.hamiltonmarine.local
Description:
The default transaction resource manager on volume Storage encountered a non-retryable error and could not start. The data contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">137</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-03T13:00:57.132961400Z" />
<EventRecordID>816351</EventRecordID>
<Channel>System</Channel>
<Computer>HMFS1.hamiltonmarine.local</Computer>
<Security />
</System>
<EventData>
<Data>
</Data>
<Data>Storage</Data>
<Binary>1C0004000200300002000000890004C000000000BD0000C000000000000000000000000000000000BD0000C0</Binary>
</EventData>
</Event>
Everything I find online is talking about windows server backup and checking the logs. My backups all complete successfully just getting this error message. Any thoughts?Please also see that: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/i-receive-the-error-the-default-transaction/d5c78d99-0b4d-e011-8dfc-68b599b31bf5
More if you ask them here: https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=windowsbackup
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Error trying to open source media - Compressor 1.2.1
I have a problem with a movie that have been sent to me. I seem unable to add it to a batch in Compressor or in Final Cut Pro 4.5 HD for the that matter.I'm using QuickTime 7.0.3 adn Mac OS X 10.4.3
When ever I had it to Compressor I get this error:
"Alert: Error trying to open source media file"
http://www.saruken.com/temp/Compressor-Error.jpg
And when I import it into Final Cut I get this error:
"File Error: 1 file(s) recognized, 0 access denied, 1 unknown."
http://www.saruken.com/temp/FCP-error.jpg
The settings for the offending movie are:
Format: H.264, 640x480, Millions, AAC, Stereo (L R), 22.050kHz
FPS: 29.97
Data Rate: 90 kbytes/sec
Key Frame: Every 300 Frames
The only difference between my test, which works fine, and this file is the frame rate (mine is at 25fps) and the number of audio channels (my test was in mono).
The file I was sent was encoded in Compressor, not sure which one - but I think it might be version 2.
The strange thing is it opens in QuickTime fine. I've tried exporting from QuickTime Pro as another h.264 with mono sound with no joy. I've tried saving a reference of the movie to see if that works, again no joy.
The only way I can get Compressor to accept the file is by transcoding it to another codec, like Soreson 3. Then FCP and Compressor are happy.
What I can't work out is why the h.264 file I made is fine (and any file I still make as well), and the one I was sent is not. I'm also having the same problem with an h.264 file I downloaded from Apple QuickTime Trailers, and an another I found on the web.
Updates that have been done recently incase they might have caused the problem are 10.4.3 and installing Motion 2 Trail (since removed), which wanted to update Pro Application Support (this might be the problem?).
Any help greatly apprieated
HamiI just tried the offending movie file on my Powerbook, it has never seen Motion 2 or those Pro Application Support updates - and it gets the same error.
Very odd indeed - any ideas?
thanks in advance
Hami -
CRVS2010 Beta - Error: No valid Report Source is available
I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load("C:\Reports\stoppages.rpt")
myReportDocument.SetDataSource(myDS)
Session.Add("Report", myReportDocument)
crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AMHi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM -
Excel 2007 = Refresh All = Error Message "Initialization Data Source Failed"
Excel 2007 => Data Tab - Refresh All => Error Message "Initialization Data Source Failed
2nd Error message:
The following data ranged failed to refresh: ExternalData1 - Continue to refresh all
How do I resolve this? Trying to connect to Oracle DB environment 12CWhat will happen if you rebuild the PivotTable/Table ?
Make sure the external database is available and the Oracle Provider for OLE DB is installed correctly.
Wind Zhang
TechNet Community Support -
Error message from the source system
Hi,
I'm trying to load 0SD_O03 & 0SD_C03 using fullupload.
I have data in source system which I checked in RSA3.
I deleted the init request from the Infopackage.
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Please help!
Thanks,
VishI see a shortdump in BW system with runtime error
MESSAGE_TYPE_X
The current application program detected a situation which
should not occur. Therefore, a termination with a short du
triggered on purpose by the key word MESSAGE (type X).
Hi A.H.P,
It didn't happen to other extractions. I just started with this one. I set up the table in SAP R/3 system and when I tried to do the initial full load in SAP BW, it comes up with the above error.
Thanks,
Vish -
Error message from the source system, Caller 09 contains an error message.
Hi,
Guru's, i got an error massage when my process chain is running(Daily) in BIW 7.0, the error got in Data Loading from source to PSA or data targets. The errors having the below details
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request. "
Can any body help me out of this situation what to do and how to resolv ethe problem.
Thanks and Regards,.
Taps....Caller 09 is a very common issue - please search the forums before posting....
Arun
Maybe you are looking for
-
Snow Leopard 10.6.1 will not connect to Kyocera Mita Copystar
I have a Macbook Pro running the latest version of OS X v10.6.1. In our office we have a Copystar (Kyocera Mita) CS-2550 on a network. Down the hall we have a Windows XP machine that connects to the CS-2550, and in settings I have found it connects v
-
What are the drawbacks to adding a Site Content Type to the Document Site Column?
I have a client who has enough SharePoint knowledge to be dangerous. They are requesting that a Column be added to all Document Libraries everywhere. We built a solution that would require a bit of work when a Site Collection is created, and it woul
-
There is a lot of talk about the Java security issues and the ability to download an apple patch fix, do i need to do this or will software update pick this up for me?
-
Any function module or BAPI for PM order confirmation
Hi all, I'm trying to confirm a PM order (IW41) background. Is there any existing BAPI or FM for me to do that? Thanks in advance.
-
Burning slide show on dvd to give to friends
how do i share a slide show or photo album with a group of friends we traveled with? i have no idea if they have apple computors or are techno friendly. i wanted to burn DVD's of my slide how to give away but i can't seem to accomplish that. what is