Events with Scrpts and JavaScript in ADOBE forms

Hello All,
On an Adobe form I have field for sub totals. I am trying to choose 'Events with Scripts' on the SHOW pull down values and choose JavaScript in the language. I was able to do this some time ago but now, I am able to choose Events with Scripts but not being able to choose JavaScript for language.
I do not have much exp. with Adobe or JavaScript but I checked whatever I could think of but could not figure out. Any body ran into this issue before? Any ideas?
Please post and Thank you ...

By trial and error, what I did is, chose 'Calculate' in the Show menu then chose JavaScript in the Language pull down menu. Then added my JavaScript code. Then went back and change 'Calculate' in the Show menu to Events with Scripts. Saved and executed it . It worked.

Similar Messages

Javascript in Adobe forms

Hi All,
How do we write Javascript in adobe forms to display a text at the end of the master page. this master page count varies based on the number of records in the table. So suppose at the last page I want to display a text. How do we achieve that??
Thanks,
Komal

Master Page will be displayed on every normal page .
So the alternate solution is make your pages as flow layout. Arrange the things properly.
After the table or at the end of all the elements you can make a text field for the number of records.
So as soon as the table is filled the elements are scrolled down and automatically at the end of the page the text field with number of records will be shown.
Thanks,
Sumeet

Direct RFC And webservice in Adobe Forms

Dear All,
Does adobe Lifecycle designer intregate RFC as a webservice ?
Or we need to write a Java/Adap Dynpro and call the adobe Form?
Regards,
Anirban.

Hello,
You can call a web service directly from an interactive form. To access RFCs, you need an application (typically webdynpro Java or ABAP).
Keep in mind that your form is interactive (meaning data storage and exchange capable) only if it has been generated by the ADS.
Regards,
Francois

Error -200141 when doing buffered events with DAQmx and PCI-6602

When doing buffered events with DAQmx and PCI-6602 I get error 200141 - Data was overwritten before it could be read by the system.
This error is generated ONLY with random inputs >200/sec.
My setup is :
DAQmxCreateCIVCountEdges(taskhandle,"Dev1/ctr3"....
DAQmxCG+FGSampClkTiming(taskhandle,"/Dev1/FPI35",...
DAQmxSetCICountEgdesChan(taskhandlem,"", "/Dev1/80MHZTimeBase")
DAQmxSetChanAttribute(taskhandlw,",",DAQmx_CI_DataXferMech,DAQmx_Val_DMA,0);
Can somebody help ?

i'm getting the same Error-200141, while reading semiperiods. (Meas_Buffered semiperiod continous)
while loop ex.rate seems to be pulsewidth*no.Samples to read. in my case PW=60ms
Input buffer size measured with Property node= 10000
why this error happens?? i cant use any mode other than implicit timing for semi-period measurement right??
more info: all the ai channels are used ~ 16 differencial.
i found one solution which is _ reinitializing the whole task if an error occur. is this the right way??
Kudos always welcome for helpful posts
Attachments:
Counter_1_Meas Buffered Semi-Period-Continuous_main_lv09.vi ‏34 KB
SemiPeriod_Reconnect Counter on Error.vi ‏35 KB

Accessing Context Data with JavaScript in Adobe Form

Hi,
does anybody know, how to access a context element with javascript in an adobe form, because I have to decide which elements will be shown at the form, depending on one context value.
Thank you for your help!
Kind regards, Patrick.

Hi,
First of all your WD context is mapped to the data view in the form. You can only access via scripting what is mapped to the data view and you get the values that the PDF currently has stored. The WD context and the data values in the context might differ (eg. due to editing).
Use scripting like xfa.resolveNode("xfa.dataset.data.<path.to.the.node>") to get a reference to the data node.
Then you can use the "value" property to access the data value.
Regards
Juergen Hauser

Invoking a workflow using GP and WD Java Adobe Forms

Hi,
I have a scenario where I want to be able to submit an Adobe Form for approval, if its approved I get info from a BAPI which populates the form, if not I just get a message saying, Not approved. So in steps i'd like to be able to:
1) User fills in a form with input parameters,
2) Submit form,
3) Approver receives form for approval,
4) Approver approves and a BAPI is invoked with the input parameters in the form, the form is populated with what the BAPI returns.
5) Form is sent back to user.
6) If form not approved then message sent to user.
I want to create the Adobe form in Web Dynpro Java. I need advice as to if I should do the whole process in GP, or can I use them both together? What are the steps involved? Can this be achieved? Do we use Portal email services to send communication between the user and the approver? Any advice/help/suggestions very welcome.
Thanks
TM

Hi Lisha
For storing the data from form to workflow and from workflow to trancation it better to maintain custom table to get the details later. You can use the std FM to insert the data from the form to table in this case you need not create custom table. Tell me which module you are working on. MSS or for ESS like leave, travel, actions like seperations, transfer which one you are using.
Regards
vijay

Problems with Image Field Table in Adobe Forms

Hello,
I have a desgined a Adobe Form(Print Only) in the Adobe Desinger in NWDS.
The form layout contains a table of images in 2 columns and 3 rows. Every Column has a Image Field and a TextField displaying the Image URL.
The URL of this image is passed at runtime.
The problem is that when the form is rendered, All the Columns have the same image which is the URL in the first row first column. However the text field displays the correct URL.
Is this some known bug in the Adobe Forms, or I am missing some property.
Regards,
Shubham

Hi,
The solution was to put the following code in the initialize event of the image field.
this.value.image.href = <Photoimagepath>.rawValue;
Where <Photoimagepath> is the image path.
Regards,
Shubham

Stuck with install/first use of Adobe forms in NWDS

Hi
I'm trying to use interactive forms in NWDS, but there seems to be nowhere in NWDS that I can access anything Adobe like. I'm not sure if this a very simple thing I'm missing in NWDS, or my installation has gone wrong.
From the beginning, I've installed Web AS ABAP+Java plugin 2004s SP6, running under linux. Everything starts up fine.
I'm running Windows XP on a virtual box to install SAPGUI 7.10 and NWDS 7.0.12. Can connect with SAPGUI and from NWDS to J2EE message server.
Installed Adobe Live Cycle Designer 7.1 (as not part of NWDS installation - 816065) plus patch plus xACF. Registered WDAbobeControl.dll according to 822198.
Tested successfully Adobe Webservices from browser, but do get an 500 error when called from within NWDS.
To start using forms, what should I do next ? I've tried creating a webdynpro project, but there's no indication of how to call a layout.
Any successful pointers rewarded with, er, points
Thanks, Phil

hi Philip,
Have you installed and configured ADS on your server.
without ADS... you cant work on your interactive forms.
check the following points
(this is an old version of requirements but still will help)
2-1 The SAP NetWeaver Developer Studio (Support Package Stack 11) including Adobe LiveCycle Designer (forms design tool) is installed on your computer.
2-2 You have access to the SAP J2EE Engine (Release 6.40). (Note that you can download an evaluation version (Sneak Preview SAP Web Application Server 6.40 Java) from the SDN Download Area at https://www.sdn.sap.com/sdn/downloadarea.sdn.)
2-3 Adobe Reader 7.0.x is installed on your computer.
2-4 The Active Component Framework (ACF) of the Interactive Forms integration is installed on your computer. With SP Stack 11, calling a Web Dynpro application that includes a PDF form for the first time should automatically install the ACF in the background. If you experience
difficulties that may be related to the frontend installation, please see SAP Note 766191 on the SAP Service Marketplace for manual installation.
2-5 The Adobe document services are configured on the SAP J2EE Engine you are using. To access the Installation and Configuration Guides for Adobe document services, go to http://service.sap.com/nw04installation → SAP Web AS → SAP Web AS 6.40 SR1 and Related Documentation → Adobe Document Services.
2-6 Basic knowledge of developing Web Dynpro applications. For helpful information about Web Dynpro, go to https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?node=linkDnode6-2.
regards,
-ag.
Message was edited by:
amol gupta

Use of JavaScript in Adobe Forms

Hi guru's...
Are there any restrictions in the use of JavaScript Coding within Livecycle Designer?
Which objects, methods and/or functions can be used and which can't?
Is there a reference guide for this?
And is there a way to use some kind of debugging for testing the JavaScript code within an Adobe Form?
Thanks in advance
Wouter Heuvelmans
SABIC Europe SAP Competence Center

Hi,
You can learn JavaScript(use it as reference) from this site...
http://www.w3schools.com/
And coming to restrictions...I dont find as such any till now in my usage...
I used to use ALERTS for DEBUGGING purpose...
Here is some sample coding...
var strText = "Raja";
alert("Hello Javacript"+strText);
Regards,
Raja Sekhar

Guided Procedures and online interactive adobe forms.

Hi Experts,
Scenario : User have to log into GP runtime, When he clicks the first action it should display the adobe form. He has to fill the details and submit the form. This form is routed for Approver 1 for review. The first approver will log into portal,view it (UWL),approve it and sent for second approver.The same process happens with the second approver.After both approvals, a BAPI updates the data in the interactive form in R/3
All the process have to be done in Guided Procedures, then integrated with Portal at the end.
We have tried creating an Wdynpro Java app with online adobe form and executed successfuly in NWDS and also in Webdynpro content administrator.
issue:-
When we create a callable object(webdynpro app(gp interface CO)) in GP and test, we were unable to view the form.
Now our question is : what are we mising ?
Is it possible to integrate online interactive adobe form with guided procedures?
Is our approach to solve the scenario right?
any links or tutorials will be greatly appreciated
TIA,

Hi
See the following Link: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f&overridelayout=true]
Kind Regards
Mukesh

MSS and workflow integration--Adobe forms

Hi ,
Can anyone send me some links on Workflow integrartion with MSS . I am looking out for MSS integration with Adobe forms ..
Regards
Abhilash

Hi Peter
This is probably more of a Forms question than workflow. At a very high level, in Apps, the workflow browser session is actually launched from a Forms session, some kind of socket connection is actually passed to the workflow session, so that when opening the new Form, it is opened in the existing applet.
Cheers
Mark
Hi,
we are building an application with web-enabled Forms 9i and Workflow 2.6.2 on Oracle 9i - and have an integration issue.
We want to include a link to Oracle Forms within a workflow notification so that the user can go directly to a particular screen in our Forms application. Including a URL to our forms application will invoke a new Forms applet on the client, but can we go to a new form in a Forms applet that is already running?
I've seen others ask the question in the forums but haven't seen any definitive responses. Oracle eBusiness Suite seems to have something like this - does anyone know how it was done and is it possible in stand-alone Workflow?
Any info. would be very much appreciated.
Thanks,
Peter

Problem with new page triggering in ADOBE Forms

Hi all,
 I am workin on a Purchase Order adobe form. I have a requirement to dispay Other stipulation text after completion of all the information. The text should be displayed on a fresh new page. I can able to display the text on new page, but if the text is not there then its displaying a blank page. How to avoid this blank page.
Can anybody please help to solve this issue
 Thanks.
 Ranganadh.

It is because you are calling a NEW-PAGE in the main window and you have not mentioned which should be the next page. For that you need to Go to SE71==> Pages==>Standard Attributes==> Mention the Next page
Assign the same for both the pages !
rgds,
TM
Please mark points if you got solution.
Message was edited by: Thomas Mann

Problem with Configuration of GP for Adobe Forms

Hi,
I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
When i try to configure 'Web Service Clients' in the visual administrator:
Configure this parameters:
- Destination URL SLD
- Authentication BASIC
- User
- Password
but the frame with this parameters:
-- System Name
-- WS Name
-- WS Port
don´t show.
I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
Features:
Netweaver 04s
Visual administrator 7 SP 9 java version 1.4.2_09
Thank you in advance
with Regards, Mariano

Hi,
please check out this link it might help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
**********please reward points if the information is helpful to you***************

Problem with Web Service integration in Adobe Form

Hi All,
I am new to web service and adobe interatcive forms.
I need to develop a button on offline interactive adobe form which would call the webservice. The web service is exposed from PI.
I am facing a lot of troubles.
1. I not am able to find the web service in Web service navigator neither in portal nor PI. hence i am not able test it.
2. I am having error while creating data connection in NWDS " Cannot choose this operation: - there is no associated SOAP
Binding ".
Hence i am not able to proceed ahead.
Please let me know how to solve the issue.
Regards,
Aditya Deshpande

i am closing this thread

JavaScript in Adobe Form

Hi Dear All,
I have a LiveCycle Form i want to use JavaScript in this form, but 1st of all i want to tell you that i don't know about JavaScript kindly help me to complete this form. Sample file is attached kindly check it and help to complete this form.
Tufail

Hi Paul,
I'm really thanksful to your for your help, but i'm un-able to download this form. Kindly if possible send it to in my e-mail "[email protected]"
Waiting for your response.
Tufail

Events with Scrpts and JavaScript in ADOBE forms

Similar Messages

Maybe you are looking for