Ever seen stub.osx process

A process I have not noticed before is using much of my processor power, about 60%. Wouldn't mind if I knew what it was doing.
Any one know what the stub.osx process does?
It's parent is WindowServer (75), whose parent is launchd (1) whose parent is kernel task (0)
Below is a sample if that helps anyone tell me what it is doing.
Thanks
2007-09-04 13:25:02.736 sample[2255] Waiting 20 msecs for System framework to be loaded...
2007-09-04 13:25:02.759 sample[2255] Waiting 40 msecs for System framework to be loaded...
2007-09-04 13:25:02.868 sample[2255] Waiting 80 msecs for System framework to be loaded...
2007-09-04 13:25:02.956 sample[2255] Waiting 160 msecs for System framework to be loaded...
2007-09-04 13:25:03.133 sample[2255] Waiting 320 msecs for System framework to be loaded...
2007-09-04 13:25:03.454 sample[2255] Waiting 640 msecs for System framework to be loaded...
2007-09-04 13:25:04.095 sample[2255] Waiting 1280 msecs for System framework to be loaded...
2007-09-04 13:25:05.375 sample[2255] Waiting 2560 msecs for System framework to be loaded...
2007-09-04 13:25:07.936 sample[2255] * Process unreadable: 1
Analysis of sampling pid 1027 every 10.000000 milliseconds
Call graph:
90 Thread_0f03
90 start
90 _start
90 main
90 CCFM_LaunchApplication
90 0xf5d4c
49 0x70aa8c
49 0x70af0c
40 0x772650
40 FindWindow
40 0x2304818
40 FindWindowCommon(Point, OpaqueWindowPtr**, short*)
24 MBarHit
23 0x2304acc
23 0x22b1908
23 0x3491e5c
23 CPSGetProcessesInFrontToBackOrder
19 _CGSGetProcessesInFrontToBackOrder
19 0x110e348
19 0x110e348
4 0x1125778
4 0x110e348
4 0x110e348
1 0x2304ab0
1 0x22b2928
1 0x22b2928
15 0x23199bc
15 CGSFindWindowAndOwner
15 0x2ebdfa0
15 0x110e348
15 0x110e348
1 0x339f8f0
1 0x339f924
1 std::set_unexpected(void (*)())
1 std::set_unexpected(void (*)())
9 0x772638
9 0x77307c
9 0x70afa0
9 0x705c34
9 0x706eec
7 0x4b1bf48
7 0x4b76b80
5 0x4b6ff94
3 0x4b1ac54
3 0x4b75ef8
1 0x4b78f84
1 0x4b791f0
1 0x4b79dd4
1 0x4b79f64
1 0x4b555ec
1 0x4bec7e4
1 0x4bfa5ec
1 0x4bfa694
1 0x4bfa694
1 0x4b78fb0
1 0x4be3a10
1 0x4c1a4ec
1 0x4c1ab48
1 0x4c1aba4
1 0x763084
1 Microseconds
1 AbsoluteToNanoseconds
1 AbsoluteToNanoseconds
1 0x4b790f4
1 0x763098
1 WideDivide
1 WideWideDivide
1 __moddi3
1 __moddi3
1 0x4b1abe0
1 0x4be78e4
1 0x4ba5b84
1 0x7c18b4
1 0x7c18b4
1 0x4b1ac30
1 0x4beb76c
1 0x4bff4e0
1 0x4bff4e0
1 0x4b1ab74
1 0x4b1ab74
1 0x4b6ff8c
1 0x4b6ff8c
2 0x4b1bf68
1 0x4b1ac30
1 0x4beb76c
1 0x4bff4d8
1 0x4bff684
1 0x4ba3dc8
1 0x4ba3828
1 0x4ba3b28
1 0x763098
1 WideDivide
1 WideWideDivide
1 __divdi3
1 __divdi3
1 0x4b1ac54
1 0x4b75ef8
1 0x4b78f14
1 0x4be3db8
1 0x4c1a4ec
1 0x4c1a8f8
1 0x4c1c348
1 0x4c18374
1 0x4bfab28
1 0x4bfab28
41 0x70aa84
41 0x70acb8
41 WaitNextEvent
41 0x236d238
41 GetNextEventMatchingMask
40 0x2288b20
19 0x167d4ac
10 0x167da0c
9 0x167d6b8
9 0x167ba5c
9 0x16696dc
9 0x1173994
9 dladdr
5 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
5 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
2 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
2 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
2 dladdr
1 0x167d698
1 0x165fc40
1 isStrongMemory
1 isStrongMemory
6 0x167da1c
5 0x167d6b8
5 0x167ba5c
5 0x16696dc
5 0x1173994
5 dladdr
4 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
4 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
1 dladdr
1 0x167d7b4
1 0x165df74
1 0x1661230
1 0x1661230
2 0x167da2c
2 0x167e3f8
2 0x167ba5c
2 0x16696dc
2 0x1173994
2 dladdr
2 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
2 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
1 0x167dba8
1 0x110e348
1 0x110e348
15 0x167d494
8 0x167d710
8 0x167801c
8 0x16696dc
8 0x1173994
8 dladdr
6 dladdr
1 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
1 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
1 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
1 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
7 0x167d6b8
7 0x167ba5c
7 0x16696dc
7 0x1173994
7 dladdr
5 dladdr
2 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
2 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
5 0x167d4c0
5 0x167d6b8
5 0x167ba5c
5 0x16696dc
5 0x1173994
5 dladdr
4 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
4 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
1 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
1 ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const
1 0x167e034
1 0x167e034
1 0x23296a4
1 CGSGetNextEventRecord
1 CGSGetNextEventRecord
90 Thread_1003
90 0x112ed08
90 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*)
90 0x168c90c
90 0x167d4ac
90 0x167dba8
90 0x110e348
90 0x110e348
90 Thread_1103
90 0x112ed08
90 0x2b053dc
90 HALRunLoop::OwnThread(void*)
90 0x167d4ac
90 0x167dba8
90 0x110e348
90 0x110e348
90 Thread_1203
90 0x112ed08
90 ReadSchedulerThreadEntryPoint
90 TSWaitOnSemaphoreCommon
90 0x1157388
90 0x1157388
Total number in stack (recursive counted multiple, when >=5):
6 0x110e348
6 0x1173994
6 0x16696dc
6 dladdr
5 0x167ba5c
5 ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const
Sort by top of stack, same collapsed (when >= 5):
0x110e348 219
0x1157388 90
ImageLoaderMachO::getIndexedExportedSymbol(unsigned) const 16
dladdr 14
ImageLoaderMachO::getExportedSymbolAddress(ImageLoader::Symbol const*) const 6
Sample analysis of process 1027 written to file /dev/stdout
Sampling process 1027 each 10 msecs 100 times
Message was edited by: James Mol

Yep, you are right. If I could find something like that I would have used it. So I had to work with what I had available from activity monitor.
It did stop when I quit a demo disk I was using. Looks like it was a Director MX2004 file/app.It was not the name of the program I was running, but it was a part of the program. Guess I should have check around sooner. Sorry to have bothered you all.
If I could remove the post I would.

Similar Messages

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

I can't get gold of adobe - which is annoying me. I have a file that has been uploaded to my creative cloud that i did not upload or have i ever seen before. SO it seems adobe cannot guarantee security and are uncontactable - i think i may leave

Since this is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Has anyone ever seen this error

We just launched a vaccation tracking app with a coldfusion
front end and an access 97 backend (dont ask). The app was tested
for over a month and passed all tests. However we never tested for
volume, or amount of users hitting the app. On the backend, we have
an access table linked to a text file. Again, this tested out
perfectly over the past month. This morning after release to the
entire company of about 2,000 people, users began reporting this
error:
The text file specification 'EmployeeList Link
Specification6' does not exist. You cannot import, export, or link
using the specification.
Some users logged in to the app successfully and some
recieved this error. For those that recieved the error, we had them
back out and re-login and then the app worked just fine.
Has anyone ever seen this or have a guess as to what is going
on?

Hi,
The right way would be to use a "real" database server.
But you can test if db-caching can improve the issue.
With each <cfquery> you can set a cachedwithin
parameter. Using that should allow you to query the Access db once,
and then have CF keep the query results in memory (for the DB as
well as the text-file).
You could query the complete database with no filtering this
way, and then filter the data using QueryofQuery to output only
records for specific users/groups/regions.
You also need to make sure the settings in CF admin are
configured right for this.
The more often the database content is updated, the slower
this solution will get though.
cheers,
fober
ps. for the cachedwithin parameter in the query set a
timeframe of forever, so the recordset never gets updated, and then
actually execute a new query to update the recordset at the end of
your "save a vacation" or "updated a vacation" functions. This way
the app would only read the db when a real change to the records
occurred.
But like I said with 2000 users, even that may not be enough
to get the app performing.

Anyone Ever Seen This Before?

Hello,
Has anyone ever seen this before: http://digitalmarketing1.com/MacErrorPicture.jpg
Running an IMac Intel Core 2 Duo 2.33 GHz, Microsoft Entourage 2004 for Mac v 11.3.6.
Opened Entourage and selected some of the tons of spam > hit Delete and there you have it! Wasn't really sure how to answer this one! It was like a Bill Gates trick question for Mac users. I had to have someone else come in the office to make sure I wasn't having a stroke or something.
I did eventually select the highlighted button after a coin flip, but to no avail. Nothing happened. Selected the other button then thinking that MUST be the right answer! Nothing...
Finally, an end task was the right answer. Seems to have gone away for now, but Entourage still crashes quite often. Rebuilt email, repaired permissions, etc. Nothing appears to be wrong, but clearly something was amiss.
Any ideas?

An unexpected exception has been detected in native
code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION
occurred at PC=0x92150b9
Function name=(N/A)
I get this error when I call the same native function
twice.Yes, many people have seen it many times when doing JNI.
The usual reasons;
-In the vast majority of cases (think 99.9%) there is a bug in the C/C++ code that does JNI. As usual a pointer is the problem.
-Very, very rarely there might be a problem with something else. Like the jvm or a third party library.

Minidv - the strangest thing I've ever seen

I started a thread last week asking if minidv was dead. I asked this because it appeared that my Panasonic minidv camera was broken and I wondered if I should make the move to a different format. Bottom line: There was no need to leave minidv at this point in time . . .just get another minidv camera and I'd be fine for the foreseeable future.
As a continuation of that discussion, I have encountered the strangest thing I've ever seen and I'm wondering if anybody can provide insight. I'll try to make a complicated story as concise as possible.
The reason I thought my Panasonic camera was in need of repairs was because large blue streak suddenly appeared across the screen when I played back or recorded video. This was not a problem with the tape, because I checked a few different tapes. In addition, these blue streaks showed up on previously recorded footage that looked perfectly fine when I dumped it to FCP a while ago.
So I bought a used Canon on eBay as a replacement. When I inserted a couple of tapes into the Canon, I saw gray streaks in the same manner I had seen blue streaks on the Panasonic. As far as I could tell, this meant one of two things: 1) there WAS a problem with the footage on the tapes, or, 2) both cameras were malfunctioning in a similar matter.
After an hour of going back and forth trying to isolate the problem, I decided to record some new footage on the Canon. When I did this, there were no gray streaks on playback of the new footage. Out of curiosity, I went back and looked at the previous footage that appeared to have gray streaks, and now the gray streaks were gone.
Wondering if some kind of miracle had happened, I took the tape out of the Canon and inserted it into the Panasonic. Still the same blue streaks on the Panasonic. Since recording a few seconds of new footage on the Canon seemed to be a miracle cure, I decided to try the same thing on the Panasonic. Voila! Blue streaks are gone. I tested other tapes . . .all blue streaks gone from the Panasonic and all gray streaks gone from the Canon.
If recording new footage on the Panasonic somehow magically realigned the heads or something, that should have fixed it last week when this problem first arose on my Panasonic. I tried all these same tests on the Panasonic and the blue streaks wouldn't go away on both newly recorded footage and previously recorded footage.
How is it possible that both of these cameras were working incorrectly in the same manner with several different tapes and then, simply by recording several seconds of new footage, they were miraculously healed? This is bizarre!!!
The only thing I did differently in all this troubleshooting was eat a banana. After that, things were fine. I say that half jokingly, but that is literally what I did. I took a break and at a banana, then 5 minutes later I tried exactly the same things and the cameras worked.
I guess I should be happy that both cameras are working now, but since I have no clue what the common denominator was that caused them to malfunction, and I have no clue how they both healed themselves, I'm worried about using them when I'm trying to record important footage.
Any serious thoughts about how this miracle has happened? (Yes, I know that user error is usually the next thing to consider, but I took very methodical steps to isolate the problem, so I really think the odds of that being the cause are very slim.)

Sounds like dirty heads to me....
I had a similar problem a few years ago. Weird streaks started showing up in my footage, so I used my friend's camera to figure out if it was a problem with the tape or my camera. I ended up transferring dirt from my camera to my friend's with the tape I was using. The footage was ruined, but I ran a head cleaning tape through both cameras and never had the problem since, although I haven't used MiniDV in a few years now.
Sounds like you did the same thing as me....meaning you're right twice: 1) the tapes had dirt on them, and 2) both cameras were having the same problem because the tape was dirty
it seems weird that recording new footage fixed the problem, but its possible that it cleaned the dirt of the heads (temporarily). I'd say buy a couple head cleaning tapes and you'll be fine....and maybe try eating more bananas

Has anyone ever seen this?

Ive been having major problems with my ipod
-making a scratching sound when trying to load
-Folder with exclamation point is showing
-cant get to play any music whatsoever.
So I been on here for about 5 hours trying to figure it out
I tried reseting on the computer. that worked until I tried to reload my songs on the ipod.
So I got rid of all ipod updaters on my computer and reinstalled the newest one.
and now this happened
http://img72.imageshack.us/img72/6141/ipodservice9hb.png
Has anyone ever seen this before?
Can anyone help me out?
thanks
sorry if this is the wrong forum

Well Tyler....I've seen something like your problem before, but i'm afraid i can't be of much help. I saw the problem because it happened to me before, and my iPod needed to be sent into Apple for repair, i believe they need to reconnect the hard drive on it....well hopefully someone here can help you out, because mine was a matter of being sent in.

ITunes 11 won't install on Win-7. Had same problem with 10.7. I've followed all the suggestions I can find, restored my computer many times, cleaned the registry... this is the worst software install I've ever seen!

Had same problem with 10.7. I've followed all the suggestions I can find, restored my computer many times, cleaned the registry... this is the worst software install I've ever seen!

I kept getting the reminder to update itunes 11.1.4 on my Windows 7 laptop. I now forget the error message other than it would stop and say something that itunes has stopped working and to do a manual d/l from itunes. That did not work either.
The suggestion to remove the Apple Software Updater from my programs solved this problem.

Will the old iMovie 08 work with lion? IMovie 11 is a complete disaster. The worst update I have ever seen!

Will the iMovie 08 work with lion? IMovie 11 is a complete disaster. The worst Mac update I have ever seen!

It should do, although pretty old:
http://support.apple.com/kb/HT1010

TS3899 Our CEO has an iPhone and an iPad. Everytime he is at a specific airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malwar

Our CEO has an iPhone and an iPad. Everytime he is at the Baltimore Washington Airport (BWI) he is unable to send or recieve email over 4G or wifi. Everything else seems to work just fine over wifi or 4G LTE. Has anyone ever seen anything similar? is this malware?
Both devices are on Verizons 4G LTE network. Both devices do have some of the same APPS installed. Can this be a case of him connecting to a rogue wifi network of a hacker that may have installed malicious code on his devices when he connected? That would explain why only his devices have the same exact issue only at BWI airport.

Something similar I've experienced. I was once having to use a AT&T hotspot and the iPad simply refused to access my mail via the mail app. But if I used safari I could get it. So the internet was working, but my supposition is that something with the hotspot's firewall messes with mail exchange.
next time your boss is at BWI, do you guys have a web interface? (for example if I wanted to access my work mail I could get them to set it up via the mail app and exchange, or I could go to a certain web address and access my mail that way via safari)
He could try using safari and the web interface if you have it.
If it's something in the hotspot's firewall I doubt it's anything that can be changed.

Ever seen a CRASH on OSX like this?

This is a video I put on 'youtube' of my intel imac crashing. Just wondering if anybody has seen anything like this happen before? (the crash is at the start of the clip and then i rebbot to see if it works ok)
http://www.youtube.com/watch?v=DHoZ5ZaHjxk
It happened to mine while I was on the dashboard. Its the first time anything like this has happened to my imac. Just wondering if this is something I should be worried about or if its something that happens from time to time? or better still does anyone know why this might have happened?

You could download the latest update for OSX from the support section of this site and install that. It should update the drivers.
To be honest I don't think its a software problem. Your software would appear to be working fine underneath that problem which looks like a problem with your graphics card.
I would keep an eye on it. If you have only just got the mac get onto apple immediately.

Adobe Updater- The worst updater i have ever seen

ok, now i would lik esoem adobe devs feedback n why this installer takes an incredibly inordinate amount of time to do its thing. I have seen many a mac installer over the last 10 years, but adobe's are just getting worse and worse. the updaters work sometime, sometime they dont. On a dual 2x2ghz mac pro, it took upwards of a half hour to run updates to 5 programs. thats amazing by any feat of the imagination.
i am trying my best to update acrobat. it just wont do it. now its just peachy if adobe can tell me why, but i figure thats a long shot. through adobe's own updater(which itself needs to constantly update itself, wtf), it refuses to update acrobat. just ran it for the last round of updates amongst the cs3 apps, and nada. still at 8.0. so, i downloaded the singular installer. upon launch, it quits.
so...what do i do now?
thx
-ed

There seems to be something special about the FIRST admin account ever set up on a Mac OS X machine. Try logging in as that account and running the update. Note that there are two or three updates related to "flash" that take 45 minutes to install on a G5 while giving you no progress updates.
If that doesn't work, try activating and logging in as root. This is dangerous, but usually effective for me. Google will show you how to do it on your OS.
Good luck.

Unknown error code 13014 problem, this is the first time I've ever seen it.

After I upgraded my PC, I copied old libraries and music files from the old hard drive to the new one. I installed the newest version of iTunes (8.0.2) and when I plugged in my ipod, I saw something I had never seen. Guess what it is?
'Unknown error code 13014!'
I had no problems for using every function that my iPod touch and iTunes have (including Genius play list) and of course, I've been updating every version of firmwares and iTunes programs. After I googled about this incident, I figured out this problem should not be seen on the newest version of iTunes but I'm still surffering from it.
Temporally, I turned off Genius Play List and now, that error code doesn't pop up but of course, I can not use Genius Play list because of it.
I uninstalled and reinstalled iTunes, restored firmware, moved Library Extras & Genius.itdb and do them again and again. Of course, none of them worked.
What can I do? Is there anyone else who is experiencing same thing to me? How can I get my Genius Play List function back?
Please Help me. I'm desperate. :<

Did you properly prep your new drive first?
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.
I think you should shutdown the installer then erase the drive per the above and start again.

Ever seen this display problem? (pictures inside)

After playing Team Fortress 2 in Windows XP off Boot Camp for an hour or two, I restart my computer back into OSX to find my screen looking like this:
http://img405.imageshack.us/img405/6320/0830091006.jpg
When it should look like this:
http://img190.imageshack.us/img190/5779/0830091007.jpg
It is fixed by resetting the PRAM on restart (holding, alt + apple key + P + R before apple icon appears on start up.) It goes away every time... but I'd like for it to never happen because I feel like resetting my PRAM once every few days is not good for my Macbook Pro.
I looked through the display anomalies thread, but could not find any pictures of people's display problems looking like mine. Although, I think it may have to do with what was plaguing other people... which is overheating?

I think I found something similar:
http://discussions.apple.com/thread.jspa?messageID=7210908#7210908
The anomaly there looks very similar, and the cure seems to be to reset the PRAM. Something you have already figured out to do.
If you had the later graphics chip, you would be covered by this program:
http://support.apple.com/kb/TS2377
However, there is no such program for your graphics chip as far as I know.
There were some speculations that the problem was worse in some versions of Leopard than in others, but I think nothing was ever definitive. Heat could be a factor if you had just finished a processor intensive activity like a game. Have you tried letting the Mac cool down before restarting in Mac OS X?
A true graphics chip problem should affect both Windows and Mac OS X, and this one seems to just affect Mac OS X for some reason. So my guess is that the chip itself is OK.
Don't know if this is much help, but you're not alone.
Good luck!

Fastest 7.5 - 8.0 Production Upgrade We Have Ever Seen

Hi All,
We have seen some production upgrades take many, many hours. Here is one with some of the larger tables around 17M rows. Pretty large tables but not huge.
Just goes to show how fast the Siebel upgrade can run when you dial in Oracle RBDMS correctly and have the right hardware.
Process Name Process Description Process Time Parameter Step/Error Summary Performance Information for Sql Performance Information for DDL
upgrep_prod_752 Production V752 upgrade (upgrep) 01h:43m:16s Parameters
Steps/Errors
Performance Information for Sql
Performance Information for DDL
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Could you spill the beans on the hardware?

Ever seen stub.osx process

Similar Messages

Maybe you are looking for