Ever Since I upgraded to Mountian lion 10.8.2 I have been getting the spininng wheel on programs more than ever ..Anyone know of a fix ?

I use firefox and since i HAVE UPGRADED to 10.8.2 I have been getting the spinning wheel more than ever. I have to force quit browser to have it stop . It's very annoying and I have talked to a few other's that are having this same problem. It's getting very annoying and need to do something about it. I have used OnyX to clean up my Mac, but that doesn't seem to help at all.  Has anyone else here been experiencing these issues .. Firefox. Skype etc ....

I use firefox and since i HAVE UPGRADED to 10.8.2 I have been getting the spinning wheel more than ever. I have to force quit browser to have it stop . It's very annoying and I have talked to a few other's that are having this same problem. It's getting very annoying and need to do something about it. I have used OnyX to clean up my Mac, but that doesn't seem to help at all.  Has anyone else here been experiencing these issues .. Firefox. Skype etc ....

Similar Messages

  • HT4623 Since I upgraded my phone ,if I text my husband he will get the text about 6hours after,he has got a iphone

    SSince I upgraded my iphone ,if I text my husband he will get it about 6hour later,he have got a iphone

    Try this:
    Settings > General > Reset > Reset Network Settings
    Then, try and send one to him again.

  • Since the last iphone update i have been getting the message cannot connect to itunes store when i try to download any application. How do i resolve this?

    Since the last iphone software upgrade, every time i try to download an application i keep getting the message "cannot connect ot itunes store". How can i resolve this? I have tried rebooting but that didnt work.

    Try logging out of your account on the iPhone by tapping on your id in Settings > Store and then log back in and see if it then works.
    If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months (or maybe a year or two) in the future and then re-trying

  • I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

    I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
    Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
    I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
    I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
    I was taken through msconfigure and adjusted the startup tab but still no joy.
    In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
    Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
    The 1st message is;
    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application  Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    When I click ok the next message that appears sometime later during the install is;
    Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
    The options I have are to abort, retry or ignore. If I retry the same message comes back and if I  abort or ignore the download continues and I then get the following message:
    'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
    After attempting to reinstall itunes only some components were installed however itunes would not open.
    It would appear many people have experienced problems with this latest download!

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • My computer has been getting the pin wheel and moving very slow since the i downloaded yosemite

    Whenever i have a video playing from my internet browser it causes my computer to pin wheel and go into thinking mode with all of my apps that are open. It moves very slow and i have to force quit everything and reboot my computer to make it act normal. this all started after the software update. Any suggestions>

    Mine has been moving extremely slow, too.  I had a problem downloading and installing Yosemite and after many conversations with Apple Care, the solution was to remove the 3rd party RAM I had just installed prior to the upgrade.  That solved the download/install problem, but now it's slow as anything.  I opened my activity monitor and sure enough, the memory pressure is at full load so I have to install more memory.  The trick is to make sure it's truly compatible.
    Have you checked your activity monitor's memory report?

  • HT4352 I have followed all the instructions on home sharing and it used to work perfectly.  With the new apple OS upgrade my apple TV now longer sees anything, even though I I applied all home sharing settings again.  Anyone know how to fix this?

    I am trying to get home sharing to work on the applie tv and its not working after a Mac OS update.  It has not worked for about a month and use to work fine.  Has anyone else experienced this problem.  Is Apple working on a fix for the problem?  Is there a work around?
    Thanks,
    Anthony

    A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
    Make sure your router/computer allows access over the following ports
    Port
    Type
    Protocol
    Used By
    53
    TCP/UDP
    DNS
    DNS
    80
    TCP
    HTTP
    AirPlay, iTunes Store
    123
    TCP/UDP
    NTP
    Network Time
    443
    TCP
    HTTPS
    AirPlay, PhotoStream, iTunes Store
    554
    TCP/UDP
    RTSP
    AirPlay
    1900
    UDP
    SSDP
    Bonjour
    3689
    TCP
    DAAP
    iTunes, AirPlay, HomeSharing
    5297
    TCP
    Bonjour
    5298
    TCP/UDP
    Bonjour
    5350
    UDP
    NAT
    Bonjour
    5351
    UDP
    NAT
    Bonjour
    5353
    TCP/UDP
    MDNS
    Bonjour, AirPlay, HomeSharing
    8000-8999
    TCP
    iTunes Radio Streams
    42000-42999
    TCP
    iTunes Radio Streams
    49159
    UDP
    MDNS (Win)
    Bonjour, AirPlay
    49163
    UDP
    MDNS (Win)
    Bonjour, AirPlay
    Refer to your router manual/manufacturer for any settings that are specific to that model.
    Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
    If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them.

  • Since IOS 5 the accelerometer of my iPod doesnt work anymore, anyone knows how to fix this?

    The accelerometer of my iPod Touch doesnt work anymore, it has worked perfectly, untill i updated the device to iOS 5.

    Did you try to reset the ipod by holding the sleep and home button until the Apple logo comes up again?
    If this does not help, try to set it up as new device without using the latest backup:  How to set up your iPhone or iPod touch as a new device

  • IPod 1st gen does not work after upgrade to iOS 3.1.3. Does anyone know how to fix this?

    I upgraded my iPod 1st Generation from 1.1.5 to iOS 3.1.3. through iTunes. After it went through the upgrading process, I received the error message, "iPod could not be restored. An unknown error occurred (6). I went to another PC and was able to restore to the original version. However, I would like to be able to upgrade to 3.1.3 so that I can buy some Apps that requires 3.1.3. Does anyone know how to fix this or have any suggestions? Thanks.

    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    http://support.apple.com/kb/TS3694#error6

  • Upgraded itunes, now it won't start on OSX.8.5 anyone know how to fix this?

    upgraded itunes because it was nagging me, now it won't start.
    Mac Mini on OSX.8.5 anyone know how to fix this?
    thanks
    Graeme

    Restart your computer,
    Refer steps here to delete SC files:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / Programs n Features / highlight QUICKTIME and click CHANGE then REPAIR.

  • Why do i have to keep Force quitting applications ever since i upgraded to Mountain lion. It is very annoying when applications cannot be existed normally

    Why do i have to keep Force quitting applications ever since i upgraded to Mountain lion. It is very annoying when applications cannot be existed normally.

    Does your system meet these Mountain Lion System Requirements?:
    General Requirements
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.
    Supported
    Models
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    And as user macsonrisanoted above, 4 GB of RAM is the practical minimum amount of RAM that Mountain Lion really needs since the OS itself uses at least that much often by itself.

  • TS3276 Ever since I upgraded to OSX Lion I have not been able to receive email from Comcast.  I can send but not receive.  I have dealt with Comcast on several occassions and after trying all the usual remedies they cannot get it to work.

    After several attempts with Comcast to fix the problem of receiving mail, I am hoping someone here can give me sound advice.  Ever since I upgraded to OXS Lion I can send email through Comcast account but, cannot receive it

    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios that you have already tried w/Comcast.
    ==============
    Your post states you are using Lion.
    Your system profile confirms you are using Snow Leopard (OS 10.6.8)
    You posted in the Mountain Lion forums (OS 10.8.)

  • Ever since i upgraded to mountain lion, my macbook pro is really really slow

    ever since i upgraded to mountain lion, my macbook pro (17" 2010 intel i7 4GB ram) is really really slow, specially at start up and shut down. any solution?
    my hard drive is has about 200 GB free space, and i do regular varification for my drive. i almost regret upgrading to mountain lion :-(

    Depending on the software you use (and how many programs you use at once) you may need to add more RAM. Shutdown with 10.8.2 is noticably longer than Lion's shutdown (and even slower than the original release of 10.8). I suggest you reboot your computer and immediately launch Activity Monitor. You want to watch two things: 1) RAM - as you use the computer over the next couple of hours after the reboot are you seeing the Page Out number increasing pretty quickly? That would be an indication that your computer is quickly using up RAM and pushing software and data into Virtual Memory to make room. This could account for the slow computer. 2) CPU - unless you are running some heavy duty software, your CPU usage may spike close to 80-90% for a few seconds but mostly hover in the 20-40% range. If it is higher than that, or if you see a single process using more than 70% constantly you may have a rogue process that is dragging the computer down.

  • HT201250 My time machine is not backing up automatically to my time capsule since my upgrade to Moutain Lion.

    Since  I upgraded my iMac,my time machine is not backing up automatically to my time capsule since my upgrade to Moutain Lion.

    I have a similar problem.  On my iMac, I swapped out (at Genius Bar) my HD via Seagate replacement program.  Ever since my time machine won't backup.  I get a error msg that says:
    Time Machine couldn't complete the backup to "[my time machine name]"
    The backup disk is not available.
    Any suggestions.
    Thanks

  • Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem.

    Ever since installing iCloud and Lion my computer is slow or freezes.  The color wheel comes on and My work stops.  I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot.  I have to shut the computer down the hard way!  when it comes back up, it is still either frozen or slow.  I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix.  It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything.  My iPhone and iPad are not effected as much so I end up doing what I can with them.  I've seen the blogs out there and understand that many have the same problem.  I have been waiting to read about a fix but I have found nothing!  Any ideas?

    Not enough free space on the startup disk can slow the system down.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    For startup issues...  open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
    And disable the Lion "resume" feature.
    Open System Preferences > General
    Deselect:   Restore windows when quitting and re-opening apps
    And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips

  • My iphone 4s ands my macbook pro will no longer sync calenders since i upgraded to Mountain Lion

    Since I upgraded to Mountain Lion, my Macbook pro and my iphone 4s will no longer sync calendaers

    Since I upgraded to Mountain Lion, my Macbook pro and my iphone 4s will no longer sync calendaers

Maybe you are looking for

  • Speakers no longer work after update.

    After installing the new update I no longer have sound either through the the speakers or the headphone jack. I know it works because I was using it right before the update. The speaker also sounds after the post bios. Any ideas.

  • Feature request for next firmware of 5320 xm 4.13

    in the next firmware for 5320 xm 4.13 we want new features to be included in this great phone 5320 xm note :  mod pls donot delete this bcoz its of great importance for nokia people here is the list of features requested Comes With Music Nokia 5320 h

  • Conversion factor plant or any other organizational unit wise

    Dear Experts, Is it posible to maintain the conversion factor between base unit and alter nate unit plant or any other organizational unit wise? Please suggest. Rgds

  • Changing schema names

    Is there a way of changing the name of a schema?? I know in dba studio you can only change the password. Thanks. TP

  • Help setting up sent mailbox both on my mac and on the server

    First things first - I have an exchange account and use Mail.app. The sent folder is set to store on server. That part works fine. What I want to be able to do is have subfolders under Sent mail the same way I have under trash and junk - options for