Every time i connect my car charger for ipad it says not charging and i tried more than one charger but they all say the same thing is there something wrong with my ipad?

My ipad doesnt want to charge in the car charger

What are the electrical specs of the car charger? The Apple wall charger is rated at 5V and 2A. If the car charger does not output 2A @5V, you'll get the not charging message. However, it will still charge, but very slowly.
 Cheers, Tom

Similar Messages

  • Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

    can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

    You can only connect to one device at a time using Bluetooth, See article below for more information.
    http://support.apple.com/kb/ht1664
    While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

  • My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    My New ipad3, when i click onthe camera app, the front camera works but the other camera only shows a black screen ! Is there something wrong with my iPad ?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • If I have more than one I phone can I use the same apple ID for all off them?

    If I have more than one I phone can I use the same apple ID for all off them?

    Yes. You can have multiple iPhones on the same ID, up to the maximum 5 total devices. FaceTime will use the sim number for calls and you can configure each phone separately, or configure one and then back it up to iTunes and them restore the image to the others.

  • Can I have more than one version of adobe reader at the same time?

    can I have more than one version of adobe reader at the same time?

    If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

  • How to control more than one instrument via different interfaces at the same time

    Hi, I am new to Labview.  I am working in a project where I have to make a Automated testing tool . So, here is the set up -  I have a Chip on a board to which there are several instruments connected namely Agilent power supply, Agilent pattern generator, oscilloscope,Dmm and Thermotron. All these instruments will be connected to the host computer via ethernet, GPIB or RS232. I have to write a program on Labview where the program  should be able to communicate with these  instruments  at  the same time  and show the ouput  on display unit . I have to run the program once, should be able to view the ouputs. So, Is it possible to write such program in Labview??.  I have  downloaded  few instuments  drivers. Is it possible to combine those intrument drivers and construct a new VI which would be able to control all this ??   Will it be easier to program this on Labview or  I should  go for Labwindows/CVI  ??.
    Please mention some useful sites or tips (if u know) for writing program.
    Thanks in advance
    shasanka

    Hi Shasanka,
    ofcourse it's possible to control more than one instrument at a time.
    You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
    So I suggest to read the manual and to look at the examples that come with LabView!
    And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • So I live in utah and my iPad is sitting on top of my piano but, find my iPhone says that it is in minianapolis. Is there something wrong with my iPad?

    I Went to use find my iPhone on my iPad last night To find my phone And on the map it said my iPad that I was using was in minianapolis. I live in utah and I am definitely not in minianapolis And neither is my iPad.  Is there a problem with my iPad? Also, I am having trouble searching anything on the internet. I have a full signal but, it takes so long for it to load anything that it comes up with a message that the server timed out and to try again.   I'm not sure what to do. I have tried turning my iPad off and back on. I have tried closing all apps, I have deleted some of my apps and all my emails to free up some of the memory.  Any other suggestion would be appreciated.  thanks

    Wifi-only iPads rely on getting their location from the router that they are connected to being in Apple's database (and being correct in that database) - only cellular iPads have a built-in GPS chip.
    For Safari (are other apps that access the internet ok ?), see if the following help
    - clear Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
    - close Safari via the iPad's taskbar : double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
    - soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Can more than one child be visible/open at the same time in Accordion navigator container?

    I have a situation where I need a layout like Accordion
    container but with more than one child panel visible at the same
    time. Is it possible with Accordion container? If not, any
    suggestions to implement this layout?

    Ryan,
    Could you elaborate on what you mean when you say that the program which ran first cannot find its report?  Are you trying to modify the same report simultaneously with these different apps?
    Regards,
    Jared Boothe
    Staff Hardware Engineer
    National Instruments

  • I have put mi i phone 4 in recovery mode but every time i connect it i tunes to restore it it shows error i have tried by installing latest edition of i tunes still shows same error nor i am able to come out of recovery mode kindly help

    i am having i phone 4 some days back i have put it in recovery mode to upgrade its ios but every time i am connecting it to i tunes it is showing error in middle
    i tried to upgrading itunes latest version but same problem also now i am not able to come out of recovery mode i tried holding the switches together but all in vain
    kindly help

    Hi there TARIQ73,
    Troubleshooting steps will depend on the error messages you are seeing. I would recommend taking at the troubleshooting steps in the article below. 
    Resolve iOS update and restore errors
    -Griff W. 

  • TS3274 My iPad won't charge. Tried more than one charger.

    My IPad won't charge. I tried more then more charger...help. Plus the sound is missing for general purposes...lock sound, etc. already tried to turn on an off.

    Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    In terms of the sounds, have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT408

  • Can't connect more than one PC to my network at the same time.

    When trying to connect a second wireless laptop to my network, the one already connected gets disconnected. I'm using a WRT110 router(cable connection) that I bought 5 days ago, and two laptops with Win Vista. I don't have any PC wired connected.

    First thing which you need to do is upgrade the firmware of your Router. Go to website linksysbycisco.com/downloads... ......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Once you configure all the settings on your router... here are some wireless settings which you can set on your Router and i think this might make your both the wireless computers go Online...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Can I configure my Bluetooth connections to use more than one wireless audio output device at the same time?

    I am trying to get my Macbook Pro (OS X 10.8.5) Bluetooth system to recognize 2 different wireless speakers at the same time. both are currently paired with mu computer and can be chosen independently and work nicely.

    Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
    iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
    You can have as many Projects as you like. You don't need ot finish one before you begin another.
    Post back if you have specific questions.
    Matt

  • Theres something wrong with my ipad lock and keypad click sound

    If i turn my ipad off, then back on again, theres a problem with the sound of the keyboard and lock clicks

    When you lose keyboard clicks and the lock sounds, those are system sounds and they can be controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085
    However, if the problem is intermittent, I would first try resetting the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen, then let go of the buttons. That might cure the problem.
    If it doesn't, then I would try resetting all settings. No data will be lost, but you will he  to enter all of the device preferences and settings again. Settings>General>Reset>Reset All Settings.

  • Is it possible to have more than one event/project in Imovie at the same time?

    Let me see if I can shorten this. I am working on a project for a review. It's going to take quite awhile and I'm half way through it. However, I need to work on another project, one thats short and I can dish out fairly quickly. My problem is that I cannot start it without discarding my current project. Which I cannot do because I will lose a weeks worth of data. And I cannot save it because it will combine all the clips and I would have to re-split them (half a days progress).
    So in short, is there a way to save my project as-is? Or possible create a new event and start a new project while maintaining my current work? Thank you for your help!

    Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
    iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
    You can have as many Projects as you like. You don't need ot finish one before you begin another.
    Post back if you have specific questions.
    Matt

  • More than one programs using report generator at the same time

    Hi,
    I want to ask that how can I use Report Generator in two program at the same time.
    As I am using Report Generator to log my data into excel, I find that if there are two
    programs contain Report Generator, the program which ran first cannot find its
    report.What can I do apart from alway open a new report?
    Ryan

    Ryan,
    Could you elaborate on what you mean when you say that the program which ran first cannot find its report?  Are you trying to modify the same report simultaneously with these different apps?
    Regards,
    Jared Boothe
    Staff Hardware Engineer
    National Instruments

Maybe you are looking for