EWA Task in SDCCN showing an unknown system

In the SDCCN of a satellite system, I found the EWA task is showing unknown system name.
I tried to add a new task EWA Alert but unavle to find the same from the add task list.
Can any one help?

Hi,
Can you please check that  SDCC_OSS and SAPOSS rfc is working fine in the satellite System .Also check the system details in SMSY and the installation Number properly.
Thanks Rishi Abrol

Similar Messages

  • Troubleshooting EWA, tasks run but sessions not in satellite

    I am trying to troubleshoot EWA in SolMan. It has worked for ages and then it stopped. We have now implemented the latest-and-greatest ST-PI and ST-A/PI.
    In SDCCN in the satellite system I see a "maintenance package" and a "session refresh", daily, both with the SolMan as their "task system".
    This sounds a bit excessive to me, as note 763561 says that a "maintenance package" already contains a "session refresh".
    Anyway, when I go to the SolMan, txn DSWP, and I order an "EearlyWatch alert" session for the satellite system, it never shows up in the satellite system. In SolMan it first gets the status "hour-glass" (meaning "waiting for data") and then the status "red flag" (meaning "data overdue").
    The RFC-destinations are fine. Moreover, the logs of the SDCCN tasks do not show any problems with the RFC-destination.
    I have forced a refresh of the service definitions: first the SolMan got new definitions from O01, and then the satellite systems got them from the SolMan.
    Where do I look next?
    BTW We are only monitoring ABAP.

    Re: check job /??/TASK_PROCESSOR
    Thank you. I suppose you mean /BDL/TASK_PROCESSOR? It is running fine (hourly), in the SolMan and in the satellite systems. It doe snot seem to achieve much, though... .
    The SolMan also has a number of SM* jobs, some running hourly, some running daily, some weekly.
    Anyway, I found that some of them have problem at each run.
    SM:GET CSN COMPONENTS runs weekly and always fails with this error:
    Step 001 started (program DSWP_GET_CSN_COMPONENTS, variant &0000000000074, user ID ...
    Internal error (SOLAR 001)
    SM:SYNC SAP SESSIONS runs daily and always fails with:
    Step 001 started (program RDSWPCISERVICEPLAN, variant &0000000000512, user ID
    Error during call of SAP back end system (see long text) (SOLMAN_SAP_BACKEND 005)
    The long text says:
    Error during call of SAP back end system (see long text)
    Message no. SOLMAN_SAP_BACKEND005
    Diagnosis
    Error calling SAP backend system: Name or password is incorrect. Please re-enterSAP-OSS via RFC destination
    Procedure
    Check the configuration of your connection to SAP in the Implementation Guide (IMG).
    Use note 320991 to analyze RFC error codes.
    Note 982045 contains information about repairing the RFC destination SAP-OSS
    I think I have found a clue! As I understand it, it is SolMan having a problem calling SAP SMP over RFC.

  • No EarlyWatch Alert for Solution Manager task in SDCCN

    Hello All,
    We have configured SAP Solution Manager and managed system to generate EWA report.
    In Solman, we have created the system, logical system and solution. We have activated the managed system in Setup EarlyWatch Alert in Solman.
    In Managed system, we have activated SDCCN, assigned BACK RFC, created Maintenance package and refresh sessions.
    However, after completing the Maintenance package task there is no EarlyWatch Alert for Solution Manager task created in managed system. We have reviewed the task logs and found no errors.
    In Solman, when we create EWA for today's date the status is showing with an Hour glass stating that "Wait for session data: SAP EarlyWatch Alert and session number"
    Kindly assist us in fixing this issue
    Thanks in advance
    Regards,
    Satish

    Hi
    the task "early watch alert for solution manager" created automatically when did you perform the task "refreh session" or "Maintenance Package"
    please create the  relevant task, via : SDCCN -> Task -> Create ->Request session data ->Periodic -> Earlywatch Alert -> Continue.
    'Schedule' the start date of the first session  and - Task -- create Click on 'Refresh sessions' - Press 'Enter' - Select 'Now', to schedule the job 'immediately. once you create the relevant tasks you go by,  in the Menu -  Goto -> start - to activate the Earlywatch alert session Now, you can check the finished EWA task in 'done' tab.
    Login to Solution Manager, goto trx. DSWP --> Select your solution, Solution Monitoring - Earlywatch alert -  Click on Earlywatch alert --> start service processing --> Press 'OK' to start the background job - click 'Refresh'
    Now, you can see the 'Early watch alert' in the green colour .
    more further refer here [EWA guide|http://forums.sdn.sap.com/servlet/JiveServlet/download/156-1701991-9166329-1518/EWA_Activation.pdf]
    jansi

  • EWA Report not being sent for two systems

    Hi Experts,
    We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
    Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
    The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
    Issue is -
    1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
    2. The ECC report is coming ok, but Solution manager report is blank.
    The places I checked the configuration -
    1. SDCCN for all systems.
    2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
    3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
    4. Background Jobs related to the task including SM:EXEC SERVICES
    Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
    Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
    Solution manager report is being sent but empty.
    Please suggest.
    Regards,
    Sabita

    Hi,
    what is your ST verison? check this note applicable or not
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
    and chek the version of your service updated ST_SER too, patch this also solve the issue
    refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
    Jansi

  • Deployment error:Error Code:-17500, Unknown System Error in TestStand - Read Seq Files in Workspace.vi-

    Help!
    When trying to deploy a test system i got the following error:
    Error Code:-17500
    Unknown System Error in TestStand - Read Seq Files in Workspace.vi->TestStand - Find Dependent Files.vi->TestStand - Add File and Dependent Files.vi->TestStand - Add All TestStand User Files to File Info Array.vi->TestStand - Update File Info.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
    I then tried to re-deploy previously successfully deployed systems - same error. (I have done nothing to my teststand setup/installation/engine or deployment files since the last successful deployment)
    I removed teststand & then re-installed it - i still got the same error. These files it is searching for do not exist on my pc.
    Any ideas what has gone wrong/how to fix it?
    cheers
    Fi

    I've just had exactly the same problem and after posting a message, have been forwarded to this thread. Luckily it looks as though we've found a solution, or a cause of the problem. One of my work colleagues (SercoSteve on discussion forums) suggested removing the Teststand 3.1\cfg directory, and replacing it with a default one from another machine, and this seems to have done the trick and made the deployment wizard be able to analyse the files and build. We are editing files in cfg so I've now got the task of replacing each file in this directory one by one to find which is causing the problem.
    I'll add another post when I find out which one it is.
    David Clark
    CLA | CTA
    CLA Design Ltd
    Hampshire, England

  • EWA report is not showing in solution manager 7.1 SPS10

    Hi Experts,
    I have configured EWA in solution manager 7.1 SPS10 as per guides and best practices and managed system is showing perfectly for MOPZ configuration, RFC's are working fine but the Background job SM:EXEC_SERVICES completes in a  few seconds with job log content showing the error
    Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)
    The EWA alert is generating successfully in managed system and available at service market place but it is not showing in solution manager because of the above mentioned error
    Please let me know any solution for this problem.
    Thanks,
    Bharat.

    Bharat,
    Note  1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1  should have most of the answers related to EWA
    Also Make sure you add the system to active solution by using "Put in Solution".
    "Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)"  this msg is for sending alert to SAP. check if note 1925658 is implemented and also note 1984512.
    -SS

  • I have installed FF 8, the problem is whenever i try to launch it, it never launches (directly or indirectly), but when i check in the task manager it shows FF running. I have installed it on windows XP professional.

    I have installed FF 8, the problem is whenever i try to launch, it never launches (directly or indirectly), but when i check in the task manager it shows FF running. I have installed it on windows XP professional. Never gave an error, no messages, etc. I have disabled all the addons.

    The "System Tray" is located at the very bottom right of your screen and is a list of most/all running applications that will show in this list.
    For your SysFader issue, this "may" be the problem:
    1 Find the "My Computer" desktop icon and right-click it. A pull-down menu will appear. Select "Properties."
    2 Click on the "Advanced" tab. This will load a new page of options.
    3 Select the "Visual Effects" tab at the top of the window and deselect "Animate Windows when minimizing and maximizing," "Fade or slide menus into view," "Fade or slide Tool Tips into view" and "Fade out Menu items after checking."
    4 Click "OK." This will remove most if not all of the Sysfader effects, at the same time correcting related errors that used to come up during opening a new file or program.

  • Satellite P100: task bar sometimes shows up an grey square icon

    I have a Satellite P100 and the task bar sometimes shows up an icon which I cannot understand. It is a grey square with an horizontal line near the botoom, and seems to represent a computer. Then, over the right bottom side there is a red circle with a red diagonal line across it (in the forward slash direction).
    Hovering the mouse over it does not produce any information.
    Can you help?

    just do this for me please and hit FN+F9 together, that is the key combination for turning the TOUCH PAD off and on, as I've said before it's the only one that I can see that looks like it. Here's a screenshot
    http://img137.imageshack.us/my.php?image=greyicontj9.jpg
    Is this the icon? If it is then FN+F9 will toggle it on and off, I'm sorry to say this but all the functions are in the manual, both on the computer and the paper one that came with the notebook plus you can go download them from Toshiba's site. I read my manual before I even got my notebook by downloading it first.
    If this is switching on and off by itself without you using FN+F9 then it would suggest there is a hardware fault with the touch pad or the drivers are conflicting with something on your system, I would suggest contacting Toshiba Technical Support.
    Message was edited by: GazzHo

  • How do I get the Airplay Icon to show on the System Preferences of my MacBook Pro?

    How do I get the Airplay Icon to show on the System Preferences of my MacBook Pro? I want to be able to connect to my AppleTV.

    I looked at that already. I've done everything it says: check to make sure wireless is working, make sure airplay is enabled, make sure device and apple tv are on the same network blah blah. The icon just isn't there. Unless I skipped a step. AirPlay works when I use it in the music app and in the video app, I jus can't get mirroring to work. I was looking at some other threads and mirroring doesn't seem to be working for a lot of people. Maybe I jus have to wait for an update =\

  • Album view in iTunes 11 unusable because singles showing as "Unknown Album"

    I have lots of "singles" in my collection (ie mp3s with nothing in the "album" field) as well as lots of albums.
    Because of this, the "albums" view in iTunes 11 is virtually unusable, as 80% of the music shows as "Unknown Album" and prevents me from just browsing genuine albums.
    Is there a ways to fix this so that the "albums" view only contains tracks that really are from albums?  Nothing I've tried (e.g. flagging them as "part of a compilation") seems to make a difference.
    thanks,

    Thanks - I have already done sonething similar with a number of smart-playlists myself, but this is a poor workaround and means the pre-built views in iTunes are useless.  It's also something else to think about every time I import a new song so that it doesn't get lost.
    Like lots of people, I've got loads of singles, mixes, radio shows and other music that is not groupable by album, and I find it ridiculous that iTunes hinders, rather than helps, to manage this..  Coupled with the appalling new search functionality this new version makes it harder than ever to navigate my music collection.

  • In solution manager system not showing all the system in SLD

    Dear Gurus,
    During the installation of solution manger sysyem i selected as a Central SLD as solution manager
    Later installed ECC 6.0 and EP systems selected SLD as solution manager system during the instllation.
    If i login in to http://hostname:50000/sld (solution manger system) and the screen also not showing all the options also. some options missing in the tab. Wat I need to do to see all the options clearly.
    It is not showing all the systems if i check in EP and ECC for SLDCHECK it is not givng any errror.
    But if i login into solution manger not  able to see all the system in SLD.
    Regards

    Thanks for reply
    it is not showing all the systems

  • Contact card in a Word comment shows an unknown presence status

    Hi,
    The contact card shows an unknown presence status for myself. I noticed this issue when I was adding a new comment to a Word document. My picture isn’t shown on the card either.
    While not a major issue, I also noticed that the contact cards for the file's author and last modifier are broken in all Office apps. However, I'm signed in to my Office 365 account in all Office apps, so it looks like that Office isn't
    linking my contact details with the online account. Also, my own picture isn’t visible in the user details (in File>Account).
    The option "Always use these values regardless of sign into Office" is unchecked in settings. Skype for Business is installed and running in the background. I guess all these issues are related to each other but the main issue
    is the broken contact card for a comment.
    My colleagues have the same issue (tested with three other computers, one of them was purchased recently). All computers are running Windows 7 with Office 365.
    Could you help me to solve this issue?
    Ps. I was referred to this forum from the Office 365’s forum – that thread has some screenshots and testing results: http://community.office365.com/en-us/f/172/t/345224.aspx

    Hi,
    Based on my research, it shows Presence Unknown status if there are multiple users with same display name in the Address Book. We can try right-clicking the Author and select Edit Property, and then selecting the correct name from Global Address
    Book.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • After loading OS X Lion on my Mac Pro it shows the operating system to still be 10.6.8 Is there something I missed in installing it.

    I have installed OS X Lion from the App Store but after installing it when I open about this Mac it still shows the operating system as being 10.6.8 Any help would be appreciated

    Did you actually install it?  Note that downloading it is not the same as installing it.  You have to let the installer run, and reboot, and finish the install.  Did it do that?  If so, did you get any error messages?

  • I synced my tv episodes to my ipod touch and it saying that the tv show is unknown how do i fix this?

    it is showing the tv show as unknown on my ipod. how do i fix this?

    I found another forum that had a solution.  Instead of using the recovery discs that came with the mac, use snow leopard to perform the actions that I needed to do.  It worked.  No input/output error and the software recognized the 1Tb hard drive.

  • Is my external monitor supposed to show up in system preferences?

    I called LG because my LG monitor keeps getting stuck in 'Power Saving Mode' and the LG customer service rep said it's because my MacBook isn't recognizing the monitor.  He said that the external monitor is supposed to show up in system preferences when it is plugged in.  Is that correct?

    It should show up in the System Preferences, Displays preference pane.

Maybe you are looking for