Excel 2010, Smartview 11.1.2.2.310, and Windows Server RDS

Have any of you tried deploying Smartview and Excel over Microsoft's newer RDS server? Everything will work fine for me when logging into the server via Remote Desktop, but when I try to access Excel via RDS (RemoteApp), I have problems dragging and dropping the feilds from Smart View's POV panel. Anybody else have this problem? I have the same problem from RDS on both Windows Server 2008R2 & 2012.
By the way, I know this isn't supported by Oracle.
Edited by: 991476 on Mar 13, 2013 8:19 AM

Not really remote desktop connection. I do have the server configured to use LAN as the default setting when the application is launched from the RDS browser site.

Similar Messages

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
I am worried that may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.

This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull

Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

I recently installed Windows Server 2012 R2 64-Bit.
We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
the Easy Print driver.
And I was right, using the Easy Print driver, I got the following result:
And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
Andy

Hi Bulent Sahin,
Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
Thank you Mr. Sahin

Exchange 2010 and Windows server backup hanging

I have a new install of Exchange 2010 running on Server 2K8 standard that I am trying to backup using the Windows server backup. For some reason it just sits at Running Consistency Check for Application Exchange.
I've had it sitting there for about 12 hours with no backup activity taking place.
Has anyone seen this or have any idea whats going on?

Additionally, if you check task manager and see ESEUTIL.EXE running (and taking processor usage) while Backup says "Running consistency check for application Exchange" then it apparently is actually still running. It would be REALLY nice if
there was a progress indicator on this step!!!
A progress indicator would be nice, especially since new log files continue to get generated as the check goes on.
Here's how I checked my progress:
Open Resource Monitor (resmon.exe)
Go to the "Disk" tab
expand the "Disk Activity" section
sort by the File column (and expand the column a bit)
you'll see eseutil.exe hitting files looking like \Device\HarddiskVolumeShadowCopy6\Exchange_Log\MailBoxDatabase1.log\E0200005A83.log, E0200005A84.log, E0200005A85.log, etc...
Use calculator to convert those rightmost digits from hex to decimal
Go into the folder with the log files (ex:\Device\HarddiskVolumeShadowCopy6\Exchange_Log\MailBoxDatabase1.log\) and find the most recent log file's hex digits and convert that to decimal
We had another team at my company build an Exchange 2010 server this past summer and I just found out that it hadn't been backed up
ever so we're up to 644,000 log files and the server is only moving at 1,312 log files per hour during the consistency check so this could be a 21 day process before the backup even begins.

SharePoint 2010 search error on searchadministration.aspx page in Windows Server 2012

Hi,
I am facing the below error on when I click on any of the page under the Search Serve
System.ArgumentException: Could not find the sitemap node with URL '/searchadministration.aspx'. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e) at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP._admin_search_listcontentsources_aspx.ProcessRequest(HttpContext context) at ... 29b1b089-c6d3-4276-aeba-c1fb063c524b
08/12/2014 10:48:36.04* w3wp.exe (0x538C) 0x0244 SharePoint Foundation Runtime tkau Unexpected ...System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 29b1b089-c6d3-4276-aeba-c1fb063c524b
08/12/2014 10:48:36.04 w3wp.exe (0x538C) 0x0244 SharePoint Foundation Monitoring b4ly Medium
I got the correlation ID and upon checking this was the error that I got.

Hi Cally,
As I understand, you encountered the issue when you accessed Search Service Application.
Did you install any updates recently? Does it work before? Could you find more related error message?
Please go to CA > Application Management > Manage service on this server, restart search service. Then go to Services.exe on the SharePoint machine, and restart SharePoint 2010 Timer and SharePoint Sever Search 14 services.
In addition, here is an article with similar issue for your reference:
http://akifkamalsyed.wordpress.com/2008/09/19/errors-after-installing-infrastructure-update-for-moss-2007/
Regards,
Rebecca Tu
TechNet Community Support

Excel 2010 changes relative link paths to absolute in files synced with Offline Files in Windows 7

Hello! I'm wondering if anyone else has seen this problem: I have a large number of Excel 2010 and 2003 files in a folder on my file server. This whole folder is also synced to my computer using Offline Files in Windows 7. I have a lot of references between
cells in different Excel files, and all referenced workbooks are physically in the same folder. This all works nicely when I create these files at work - all file paths referenced in the cells are created as relative paths and the documents open correctly.
This is, I understand, the expected and default behavior when Excel creates links. When I edit these files at home, nothing seems odd until I get back to work and sync these files back to the file server. At this point, I discovered that Excel 2010 has, when
I saved the files while away from the corporate network, changed /all/ the cell references in any offline-edited Excel files to point at absolute paths, and that these absolute paths point to somewhere in my %APPDATA% structure. So whenever I come to work
and I try to open an Excel file that I have recently worked with offline, I get a bunch of error messages about referenced files that are missing, although clearly they exist in the same folder as the file I've opened, and I must edit all the file references
again, whereupon they are again created correctly as relative paths (since all files exist in the same folder), which are promptly mangled into absolute C:\....\Offline Files\.....\..... paths whenever I save them at home (and since that works too, I don't
notice it again until I come back to work and the offline files are synced back to the real network location). This seems to be a case of Windows 7's Offline Files not being able to fool Excel 2010 into believing it is working on a file server - apparently
Excel 2010 can see through the fakery and decides on it's own to "fix" the problem (which obviously isn't a problem since the paths are relative to begin with) by saving the paths as absolute paths instead. Yes, really clever, Excel. The exepected behavior
according to MSKB is that links are created as relative paths, so why does it change to absolute whenever Offline Files are involved? I know Offline Files only syncs, it doesn't actually change the files, so I can conclude that Excel is the program at fault
here. Is there a fix for this, or a known workaround? Because frankly, this bug makes it impossible for me to work in any advanced manner with linked Excel files. The sad thing is that this worked perfectly fine with Office 2003 and Windows XP. Is there a
patch for this problem that I might have missed (I am running the latest Service Pack and I get Office updates from Microsoft Update). If not, is there a workaround I can use to prevent Excel from corrupting my links when I edit the files offline?

Hello danceswithwindows,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
Sincerely
Rex Zhang
Rex Zhang
TechNet Community Support

Cannot copy and paste in an Excel 2010 file

Cannot copy and paste in an Excel 2010 file
The user has modify rights, and on other files it works fine. She can save and do everything with the file except copy and then past to another tab in the same file or a new one. Or anywhere.
We tried the file with a different user from the same department and there it does work.
I tried to disable the X-com plugins and disable OVF for performance also. Nothing works...anybody knows maybe what the issue might be ?
The file is on a network drive on a domain and does work on another user to copy and paste. I have not let her log in with the same user account n test it on a different system so I asked and will get a update soon. There are no error messages the
paste option is greyed out.

Hi,
How about the issue now, is it solved?
This issue might be caused by her user profile. What the result would be if using another user account to log on her computer to test this issue.
Also do you have the same problem when you open excel in Safe Mode?
Try opening Excel without any Add-ins or hidden workbooks:
Press and hold the CTRL key, and then click the excel program.
Best Regards,
Wind

Hide Blank Rows in a Pivot Table in Outline Form in Excel 2010

In Excel 2010 Pivot Tables, using the Outline Format and Repeat Item Labels, is it possible to hide the rows with no data? Please see atch.
Doug in York PA
Douglas R. Eckert

Hi,
If you want to hide these subtotal rows, you have to use the Tabular forum, the Tabular layout is very similar to Outline except that you will not
have subtotals at the top of every group.
1.Right-click an item in the pivot table field, and click Field Settings
2.In the Field Settings dialog box, click the Layout & Print tab.
3.Check the 'Show item labels form in tabular form’
check box.
4.Click OK
Then your pivot table layout should look like the image below:
Let us know if that’s what you wanted.
Regards,
Melon Chen
TechNet Community Support

Web ADI with excel 2010,

Hi,
Is it possible to use Web ADI with excel 2010.
I saw an article in metalink saying we need to apply a patch in order to word.
However we were able to generate the template without applying the patch, but it didnt have the Oracle under Add Ins menu.
Does anyone know if it is possbible to use web adi with excel 2010 without appying a patch.
Thanks and Regards,
MPH

Hi
Please try this
Close all your excel windows which you have opened
open new excel, navigate to
File-->Options-->Trust Center--> Click on Trust Center Settings
select Macro Settings --> Select the radio button Enable all Macros (not recommended;potentially, dangerous code can run) { dont worry about selectign this option once web adi is downloaded changes back to its original disable notifications icon}
Enable the check box Trust Access to the VBA Project Object Model
Click on OK again click on OK close the excel
Thanks
Krishna

Does ms office 2010 support in windows server 2008r2

Hi
I required the information regarding that does ms office 2010 support in windows server 2008r2 edition & if support then how can i down load the office service pack for the same.

Yes, you can install Office 2010 on Windows Server 2008 R2 and Windows Server 2008 R2 Service Pack 1 (SP1). For the system requirements for Office 2010, please refer to this article:
http://technet.microsoft.com/en-us/library/ee624351(v=office.14).aspx
Microsoft now no longer offers a download from their site, however, if you already have a product key of Office 2010, you can get Office 2010 installation package from this website:
http://office.microsoft.com/en-us/products/microsoft-office-2010-backup-FX101853122.aspx . If you don’t have a product key, I would suggest you to try the new Office – Office 2013, which also can be installed on Windows Server 2008 R2.
For more information about the new Office, please check on this site:
http://office.microsoft.com/en-us/
Thanks,
Ethan Hua CHN
TechNet Community Support

Smartview 11.1.2.1.0/Excel 2010

I am using Smartview version 11.1.2.1.0 and am having issues trying to access Essbase in Excel 2010. If I try to access member selections from my Smartview menu Excel 2010 just freezes. If I try to just type in the member selections and refresh I will get #NoAccess for my results but I am connected if I look at the sheet information.
Thanks for any help you can offer

Thanks for the information, but one last question. Where could I find more information about this Unpublished Bug 9955285?, I am trying to look for more information about if it's going to be fix in any patch but I don't find anything
Thanks a lot

SmartView 11.1.2.2.000 - SmartView tab disappears from Excel 2010

We are using SmartView 11.2.2.2.000 with Excel 2010. The SmartView tab frequently disappears from the Excel menu, especially for one particular user. Each time I walk him thru re-enabling it. This user's files are usually multiple sheets. Anyone know why this keeps happening and is there a permanent way to fix it?
Thanks.
Terri T.

Check this article in MOS:
Smart View Installs Successfully on Windows 7 with Office 2010 32 Bit but Fails to Load on Excel Startup (Doc ID 1364765.1)

Smartview 11.1.2 "Hyperion" tab disappeared from his Excel 2010.

My user's Smartview 11.1.2 "Hyperion" tab disappeared from his Excel 2010. Trust Center shows that Add-In's are not disabled. We reinstalled and installed SV but nothing worked. What can we run to register SV to his Excel 2007? His Excel 2010 does have Smartview Add-in for HsTbar, Hsaddin.dll

Please note that the 'solution' of copying files to the Addins folder is NOT recommended. You will probably cause more issues or store up problems for the future, such as when you upgrade the SmartView client. Believe me -- we get a lot of calls into Support caused by people doing this. It can cause:
- loss of functionality owing to mixed file versions
- the full path to HsTBar.xla to appear in front of SmartView functions
- DLL hell when it comes to upgrading.
Please check your system for duplicate copies of HsTBar.xla and HsAddin.dll and remove all but the ones in the correct SmartView installation folder. Also delete any duplicates of the other SmartView DLLs. Then re-register the DLLs in the SmartView\bin folder according to Jasmine's instructions. Note that you must be logged into your PC as a Power User or Administrator to do this. You should get a 'success' message for each DLL you register. Alternatively, uninstall SmartView, search for any remaining SmartView files (HsTBar.xla, HsAddin.dll) anywhere on the hard drive and delete them, then re-install.
If you still get problems, log a support call.
Edited by: user807652 on Feb 17, 2011 4:28 AM

MS Excel 2010 takes long to open with Hyperion Smartview 11

Hi,
the MS Excel 2010 takes about 20 sec to open a blank sheet when is with a user without Internet access. It is automatically open with Internet access. This behaviour started after the installation of Hyperion Smartview.
Can you help?
Ant K.

I've never worked with Hyperion Smart view.
But it sounds like the program configured to access the internet and perform an operation, such as check for updates for that program. Since we know this issue may caused by the Hyperion Smart view. If it is an add-in for office, we can try
to disable it to check if excel can open blank worksheet normally, meanwhile, if you want to use this tool, you can enable it. File->options->add-in

Excel 2010, Smartview 11.1.2.2.310, and Windows Server RDS

Similar Messages

Maybe you are looking for