Excel email attachment
Hi,
My excel file contains a logo , text and other information .
I have to send this excel file(which is on the local PC in the C drive ) as email attachment .So I am using the FM SO_NEW_DOCUMENT_ATT_SEND_API1 .
The receiver is able to get the mail but the contents are missing in the attached file .
Suggest what changes should I make in the below code to successfully send the attachment
I am passing the file path as value to parameter object_header .
Also I feel the value to parameter CONTENTS_BIN is wrong.
So please help
Report ZKNTEST1.
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*Populate message body text
it_message = 'Please find attached a layout'.
APPEND it_message.
*Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Excel layout documnet attachment'
'XLS'
'C:\layout.xls'
'Excel attachment'
changing gd_error
gd_reciever.
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
it_message = pit_message.
*Fill the document data.
DESCRIBE TABLE it_attach LINES TAB_LINES.
w_doc_data-doc_size = ( TAB_LINES - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
pit_attach = ' \O/ '. APPEND pit_attach.
pit_attach = ' | '. APPEND pit_attach.
pit_attach = ' / \ '. APPEND pit_attach.
t_attachment = pit_attach.
t_object_header = 'C:\layout.xls'.
append t_object_header .
*Create document notification
DESCRIBE TABLE it_message LINES TAB_LINES.
t_packing_list-TRANSF_BIN = 'X'.
t_packing_list-HEAD_START = 1.
t_packing_list-HEAD_NUM = 0.
t_packing_list-BODY_START = 1.
t_packing_list-BODY_NUM = TAB_LINES.
t_packing_list-doc_type = 'RAW'.
t_packing_list-DOC_SIZE = TAB_LINES * 255.
APPEND t_packing_list..
*Create attachment notification
DESCRIBE TABLE t_attachment LINES TAB_LINES.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
t_packing_list-BODY_NUM = TAB_LINES.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-DOC_SIZE = TAB_LINES * 255.
APPEND t_packing_list.
*Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = w_doc_data
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = w_sent_all
NEW_OBJECT_ID =
TABLES
PACKING_LIST = t_packing_list
OBJECT_HEADER = t_object_header
CONTENTS_BIN = t_attachment
CONTENTS_TXT = it_message
RECEIVERS = t_receivers
*Populate zerror return code
ld_error = sy-subrc.
*Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Hi Sandhya,
Try this out.Reward points if useful
ISR_FI_SEND_EMAIL
ISR_FI_SEND_EMAIL_NEW_USER
SLS_CUST_SEND_EMAIL_TOOL
OR
Refer to followinh code
report y_cr17_mail.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
user = g_user
PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
EXCEPTIONS
USER_NOT_EXIST = 1
PARAMETER_ERROR = 2
X_ERROR = 3
OTHERS = 4
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'sap-img.com testing by program'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
FOLMEM_DATA =
RECEIVE_DATA =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
End of Program[/code]
Also check this links as well.
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
Edited by: ravee on May 15, 2008 11:26 PM
Similar Messages
-
Issue with excel email attachment after upgrade
Hi ,
We have recently upgraded from ECC 5.0 non-unicode to ECC 6.0 unicode version.
An existing program converts the data in an internal table into HTML code and then sends this as an email attachment(XLS format) using the FM SO_NEW_DOCUMENT_ATT_SEND_API1.
Now if the mail attachment is sent from the non-unicode system , excel converts the HTML code and shows the data perfectly but when i open the mail attachment from the unicode system, the HTML code sits in a cell of the excel and therefore data is not visible.If i wish to see the data, i will have to cut the data from the cell and paste it .
I anticipate that this is because of some issue with the unicode.
Your inputs towards the issue resolution are highly appreciated.
Thanks,
Avanish JoshiI found the note 1151258 and as mentioned in it, i used the BCS class for sending excel attachments and it worked.
My sincere apologies for not replying to those who posted queries to this question.
Thanks. -
Hi Experts
Hope you guys are doing fine.
I have a requirement where i need to send the internal table data as an excel email attachment.I used the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1',but in the email attachment,the data is getting distorted and not coming in a properly manner.Here with,i am pasting the code i used.
(l_pto_tab is the internal table)
FORM report_as_email .
TYPES : BEGIN OF ty_pto_tab,
pernr(10),
nachn(40),
vorna(40),
hdate(15),
supno(10),
supln(40),
supfn(40),
END OF ty_pto_tab.
DATA: wa_pack_list TYPE sopcklsti1,
it_pack_list TYPE TABLE OF sopcklsti1.
DATA: it_email_lines like SOLISTI1 occurs 0 with header line,
it_obj_text like SOLISTI1 occurs 0 with header line.
DATA: wa_object_header TYPE solisti1,
it_object_header TYPE TABLE OF solisti1.
DATA: wa_mail_receiver TYPE somlreci1,
it_mail_receiver TYPE TABLE OF somlreci1.
DATA: wa_mail_data TYPE sodocchgi1,
l_pto_tab type ty_pto_tab occurs 0 with header line.
DATA: w_att_lines(6) TYPE n.
DATA: w_att_lines1(6) TYPE n.
DATA: text1 TYPE c LENGTH 155.
DATA: text2 TYPE c LENGTH 155.
DATA: text3 TYPE c LENGTH 155.
DATA: wa_error_cols TYPE ty_email_lines.
DATA: count TYPE i.
DATA: gv_date1 TYPE c LENGTH 10.
REFRESH: it_pack_list,
it_object_header,
it_mail_receiver.
Set first line to be displayed in the document
wa_object_header-line = 'PTO_Reminder_List.TXT'.
APPEND wa_object_header TO it_object_header.
*-- Document data
CLEAR: wa_mail_data.
wa_mail_data-obj_name = 'Object name'.
wa_mail_data-sensitivty = 'O'.
wa_mail_data-obj_descr = 'PTO Reminder Report'.
Set Mail body
it_obj_text = 'PTO Reminder'.
append it_obj_text.
clear it_obj_text.
*-- Set Attachment values
l_pto_tab-pernr = 'EE Number'.
l_pto_tab-nachn = 'EE LNAME'.
l_pto_tab-vorna = 'EE FNAME'.
l_pto_tab-hdate = 'Hire Date'.
l_pto_tab-supno = 'Sup No'.
l_pto_tab-supln = 'Sup LNAME'.
l_pto_tab-supfn = 'Sup FNAME'.
INSERT l_pto_tab INTO it_email_lines INDEX 1.
CLEAR l_pto_tab.
count = 1.
loop at it_pto_tab.
l_pto_tab-pernr = it_pto_tab-pernr.
l_pto_tab-nachn = it_pto_tab-nachn.
l_pto_tab-vorna = it_pto_tab-vorna.
l_pto_tab-hdate = it_pto_tab-hdate.
l_pto_tab-supno = it_pto_tab-supno.
l_pto_tab-supln = it_pto_tab-supln.
l_pto_tab-supfn = it_pto_tab-supfn.
append l_pto_tab.
clear l_pto_tab.
endloop.
l_pto_tab is the internal table
LOOP AT l_pto_tab.
count = count + 1.
INSERT l_pto_tab INTO it_email_lines INDEX count.
ENDLOOP.
REFRESH l_pto_tab.
wa_pack_list-head_start = 1.
wa_pack_list-head_num = 0.
wa_pack_list-body_start = 1.
wa_pack_list-body_num = 1.
wa_pack_list-doc_type = 'RAW'.
wa_pack_list-doc_size = 255.
APPEND wa_pack_list TO it_pack_list.
CLEAR: wa_pack_list.
DESCRIBE TABLE it_email_lines LINES w_att_lines.
READ TABLE it_email_lines INDEX w_att_lines.
wa_mail_data-doc_size = ( w_att_lines - 1 ) * 255 +
STRLEN( it_email_lines-line ).
Attachment
wa_pack_list-transf_bin = 'X'.
wa_pack_list-head_start = 1.
wa_pack_list-head_num = 1.
wa_pack_list-body_start = 1.
wa_pack_list-body_num = w_att_lines.
Excel attachment
wa_pack_list-doc_type = 'XLS'.
wa_pack_list-obj_name = 'ATTACHMENT'.
wa_pack_list-obj_descr = 'PTO_REMINDER_LIST'.
wa_pack_list-doc_size = wa_mail_data-doc_size.
APPEND wa_pack_list TO it_pack_list.
CLEAR: wa_pack_list.
*-- Set E-Mail Receiver address
wa_mail_receiver-receiver = '[email protected]'.
wa_mail_receiver-rec_type = 'U'.
wa_mail_receiver-express = 'X'.
APPEND wa_mail_receiver TO it_mail_receiver.
*-- Send E-Mail
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = wa_mail_data
put_in_outbox = 'X'
commit_work = 'X'
tables
packing_list = it_pack_list
object_header = it_object_header
contents_bin = it_email_lines
contents_txt = it_obj_text
receivers = it_mail_receiver
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
IF NOT sy-subrc IS INITIAL.
WRITE: / 'E-mail failed.'.
ENDIF.
ENDFORM. " report_as_email
Can anyone look into this code and let me know what changes i need to make to correct this error.Or if anyone has any sample code,can you pls share it with me.
Your help wud be greatly appreciated.
Thnxalan,
Check the below code.
report y_cr17_mail .
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
user = g_user
PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
EXCEPTIONS
USER_NOT_EXIST = 1
PARAMETER_ERROR = 2
X_ERROR = 3
OTHERS = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'Manohar testing by program'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'Manohar testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
FOLMEM_DATA =
RECEIVE_DATA =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
Don't forget to reward if useful....... -
Field names Missing in the (Excel) Mail attachment
Hi ,
I am trying to send my ALV Grid Output as Excel Email attachment using the below code
The problem is that the field names are missing in the receivers Mail.
i.e
*Name* *Emp Code* * Branch* "this is missing
abc 123 ukp
I searched many threads but unable to find the solution for this.
Kindly suggest me regarding this issue.
loop at p_eadd.
if p_eadd-low <> space.
clear reclist.
reclist-rec_type = 'U'. "Internet-adress
reclist-receiver = p_eadd-low.
reclist-express = 'X'.
append reclist.
endif.
endloop.
* endif.
* Send the document
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_type = 'RAW'
document_data = doc_chng
* PUT_IN_OUTBOX = 'X'
tables
object_content = objcont
receivers = reclist
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
others = 99.
ld_aplstat = '4'.
case sy-subrc.
when 0.
loop at reclist.
if reclist-receiver = space.
name = reclist-rec_id.
else.
name = reclist-receiver.
endif.
if reclist-retrn_code = 0.
write: / name, ': succesfully sent'.
else.
write: / name, ': error occured'.
endif.
endloop.
ld_aplstat = '0'.
when 1.
write: / 'Too many receivers specified !'.
when 2.
write: / 'No receiver got the document !'.
when 4.
write: / 'Missing send authority !'.
when others.
write: / 'Unexpected error occured !'.
endcase.
*.Tell workflow to go on
clear ls_scma_event.
ls_scma_event-wf_event = cs_wf_events-finished.
ls_scma_event-wf_witem = wf_witem.
ls_scma_event-wf_okey = wf_okey.
call function 'KPEP_MONI_CLOSE_RECORD'
exporting
ls_key = gs_key
ls_scma_event = ls_scma_event
changing
ld_aplstat = ld_aplstat
exceptions
no_id_given = 1
others = 2.
call function 'SAP_CONVERT_TO_XLS_FORMAT'
exporting
i_field_seperator = ' '
i_line_header = 'X'
i_filename = p_file
* I_APPL_KEEP = ' '
tables
i_tab_sap_data = it_final
* CHANGING
* I_TAB_CONVERTED_DATA =
exceptions
conversion_failed = 1
* OTHERS = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Thanks in Advance,
Mr. BenHi Ben,
Follow the code below....
Your internal table it_final will have the attachment data. After you got the attachment data do the following
gc_ret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
lt_attachment TYPE TABLE OF solisti1 ,
gt_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0 WITH HEADER LINE,
CLEAR:gs_attach. <this will have your attachment, declare a structure which contains fields of your excel sheet>
<before this you have to copy all the fields from your final internal table which should be attached to email to gs_attach>
For attaching field names
CONCATENATE gc_ret gs_attach INTO gs_attach.
gs_attach = gs_attach+1.
APPEND gs_attach TO gt_attach.
CLEAR:lt_attachment.
lt_attachment[] = gt_attach[].
SORT lt_attachment .
DELETE ADJACENT DUPLICATES FROM lt_attachment COMPARING ALL FIELDS.
CLEAR gs_attach.
CONCATENATE <field names >
INTO gs_attach SEPARATED BY gc_tab.
INSERT gs_attach INTO lt_attachment INDEX 1.
<field addition ends>
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_type = 'RAW'
document_data = doc_chng
PUT_IN_OUTBOX = 'X'
tables
object_content = objcont
receivers = reclist
contents_bin = lt_attachment
exceptions
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards,
Aravind. -
After I Update to IOS 7.1 I can't open the excel file attached in my email
After I updated my Iphone 5s from IOS7.0.6 to IOS7.1 when i check my email i can't open excel file attached in my email i check with my frineds phone thy have same issoue
David_PDX wrote:
Hi Alex,
The trick to this whole thing is to scroll to the bottom of the message. There should be a dashed line at the bottom of the email message with text underneath it that says, "This message was downloaded as plain text." Underneath that it should say (in blue hyperlink text) "Download full message". Select that hyperlink, and the Excel file should download completely. You should then be able to select the document and have it open correctly.
I have had the same concern regardless of file format that is sent, so I do not believe your issue is with file format. Hope this helps.
I've seen the same thing happen with images, which it displays in a corrupted form. It's fixed by downloading the full message.
There's a more serious side effect of this, which I've now seen with several types of files. If one FORWARDS the email to someone else, the attached files it sends them are CORRUPTED and unopenable too. In the case of a Word files I looked at, it had dropped the last two bytes of the file.
The workaround for that is to download the full message before forwarding.
I'm seeing this happening with so many types of attachments that I'm assuming it affects them all. Please everyone report this to Apple feedback (http://www.apple.com/feedback/). It's one thing not being able to open a file on your device, it's another to have files corrupted permanently just by forwarding. -
Convert SAP spoolOR list to excel and send as an email attachment
Hello All Masterminds ,
Iu2019ve developed a utility, in which users has to maintain one u201CZu201D view where they can give any report name, type of attachment (PDF, XLS, TXT) and sender email addresses.u201DNote: thing to remember here is Iu2019m creating XLS,TXT,PDF format dynamicallyu201D
It is working fine for PDF. Iu2019m submitting the program and creating spool and converting it to PDF and sending to their emails as an attachment. It looks fantastic. When Iu2019m doing the same thing for XLS it is showing messy output, I tried many functions and search lots of unanswered, unfinished SDN posts. I almost tried every single clue given in these posts but no luck. Email part is working fine using classes ( l_document = cl_document_bcs=>create_document , l_document->add_attachment , l_send_request->set_document( l_document ).,cl_sapuser_bcs=>create( l_uname ).,l_send_request->add_recipient, l_send_request->set_send_immediately( '' ). ) .
My real deal is to create a beautiful XLS out put. I also tried FMs LIST_FROM_MEMORY and LIST_TO_ASCI but no-luck. I thought instead of spool if I use u201CSubmit EXPORTING LIST TO MEMORY u201C option may be It works but BIG NO
Iu2019m sure some genius out there has done something like his , I ain`t genius that is why I am stuck Please guys throw me some bones . As I said, I am able to do most of the things. I need some magic code /answer which turns my messy, ugly unformatted excel sheet attachment to beautiful u201Cpiece of art u201CExcel output.
Here are the FMs I tried so far with different combinations.
CALL FUNCTION 'LIST_FROM_MEMORY'
CALL FUNCTION 'LIST_TO_ASCI'
CALL FUNCTION 'GUI_DOWNLOAD'
CALL FUNCTION 'RSPO_DOWNLOAD_SPOOLJOB'
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
CALL FUNCTION 'CONVERT_OTF'
CALL FUNCTION 'SAP_CONVERT_TO_XLS_FORMAT'
And logic like to get rid of things getting in Asci tables
cl_abap_char_utilities=>newline.
cl_abap_char_utilities=>horizontal_tab
cl_abap_char_utilities=>VERTICAL_TAB
cl_abap_char_utilities=>cr_lf
FIELD-SYMBOLS: <lfs_table>, " Internal table structure
<lfs_con>. " Field Content
DATA: l_text TYPE char1024. " Text content for mail attachment
DATA: l_con(50) TYPE c. " Field Content in character format
Columns to be tab delimeted
LOOP AT FINAL ASSIGNING <lfs_table>.
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE <lfs_table>
TO <lfs_con>.
IF sy-subrc NE 0.
CONCATENATE c_cr l_text INTO l_text.
APPEND l_text TO i_attach.
EXIT.
ELSE.
CLEAR: l_con.
MOVE <lfs_con> TO l_con.
CONDENSE l_con.
IF sy-index = 1.
CLEAR: l_text.
MOVE l_con TO l_text.
ELSE.
CONCATENATE l_text l_con INTO l_text
SEPARATED BY c_tab.
ENDIF.
ENDIF.
ENDDO.
ENDLOOP.
Posts : https://forums.sdn.sap.com/click.jspa?searchID=14756211&messageID=4401940
https://forums.sdn.sap.com/click.jspa?searchID=14756211&messageID=4796657
https://forums.sdn.sap.com/search.jspa?threadID=&q=convertspoolintoexcelformatforsendingmail&objID=c42&dateRange=all&numResults=30&rankBy=10001
Will appreciate your help and time.
Thanks,
Saquib KhanHi,
i send excel-att like this.
REPORT Z_EMAIL_CL_BCS MESSAGE-ID ZZ.
More examples here BCS_EXAMPLE_* with se38
DATA: SEND_REQUEST TYPE REF TO CL_BCS.
DATA: SUBJECT TYPE SO_OBJ_DES.
DATA: ATT_TYPE TYPE SOODK-OBJTP.
DATA: IT_TEXT TYPE BCSY_TEXT.
DATA: WA_TEXT LIKE SOLI.
DATA: IT_BIN TYPE SOLIX_TAB.
DATA: WA_BIN TYPE SOLIX.
DATA: DOCUMENT TYPE REF TO CL_DOCUMENT_BCS.
DATA: SENDER TYPE REF TO CL_SAPUSER_BCS.
DATA: RECIPIENT TYPE REF TO IF_RECIPIENT_BCS.
DATA: BCS_EXCEPTION TYPE REF TO CX_BCS.
DATA: SENT_TO_ALL TYPE OS_BOOLEAN.
Bytes der Datei
DATA: IT_LENGHT TYPE SO_OBJ_LEN.
DATA: N10(10) TYPE N.
CONSTANTS: CON_NEWL TYPE ABAP_CHAR1 VALUE CL_ABAP_CHAR_UTILITIES=>NEWLINE,
CON_TAB TYPE ABAP_CHAR1 VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
CONSTANTS: CON_NEWL TYPE X VALUE '0D', "OK for non Unicode
CON_TAB TYPE X VALUE '09'. "OK for non Unicode
START-OF-SELECTION.
PERFORM MAIN.
END-OF-SELECTION.
FORM MAIN.
TRY.
-------- create persistent send request ------------------------
SEND_REQUEST = CL_BCS=>CREATE_PERSISTENT( ).
PERFORM HEAD_CONT.
PERFORM XLS_ATT.
add document to send request
CALL METHOD SEND_REQUEST->SET_DOCUMENT( DOCUMENT ).
--------- set sender -------------------------------------------
SENDER = CL_SAPUSER_BCS=>CREATE( SY-UNAME ).
CALL METHOD SEND_REQUEST->SET_SENDER
EXPORTING
I_SENDER = SENDER.
--------- set recipent -----------------------------------------
RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(
'the email adress' ).
add recipient with its respective attributes to send request
CALL METHOD SEND_REQUEST->ADD_RECIPIENT
EXPORTING
I_RECIPIENT = RECIPIENT
I_EXPRESS = 'X'.
RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS(
'the email adress 2' ).
add recipient with its respective attributes to send request
CALL METHOD SEND_REQUEST->ADD_RECIPIENT
EXPORTING
I_RECIPIENT = RECIPIENT
I_EXPRESS = 'X'.
---------- send document ---------------------------------------
CALL METHOD SEND_REQUEST->SEND(
EXPORTING
I_WITH_ERROR_SCREEN = 'X'
RECEIVING
RESULT = SENT_TO_ALL ).
COMMIT WORK.
CATCH CX_BCS INTO BCS_EXCEPTION.
WRITE: 'Fehler aufgetreten.'(001).
WRITE: 'Fehlertyp:'(002), BCS_EXCEPTION->ERROR_TYPE.
EXIT.
ENDTRY.
ENDFORM. "main
FORM HEAD_CONT.
CLEAR: IT_TEXT[], WA_TEXT, SUBJECT.
ATT_TYPE = 'RAW'.
CONCATENATE 'Betreffzeile am' SY-DATUM 'um' SY-UZEIT
INTO SUBJECT SEPARATED BY SPACE.
WA_TEXT = 'Hello!'.
APPEND WA_TEXT TO IT_TEXT.
WA_TEXT = 'dieses ist eine Testmail'.
APPEND WA_TEXT TO IT_TEXT.
WA_TEXT = 'Gruß'.
APPEND WA_TEXT TO IT_TEXT.
DESCRIBE TABLE IT_TEXT LINES N10.
N10 = ( N10 - 1 ) * 255 + STRLEN( WA_TEXT ).
IT_LENGHT = N10.
DOCUMENT = CL_DOCUMENT_BCS=>CREATE_DOCUMENT(
I_TYPE = ATT_TYPE
I_TEXT = IT_TEXT
I_LENGTH = IT_LENGHT
I_SUBJECT = SUBJECT ).
ENDFORM. "HEAD_CONT
FORM XLS_ATT.
DATA: BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
MATKL LIKE MARA-MATKL,
BRGEW LIKE MARA-BRGEW,
END OF ITAB.
DATA: BRGEW(18).
CLEAR: IT_BIN[], WA_BIN, SUBJECT.
SELECT MATNR MTART MATKL BRGEW INTO TABLE ITAB FROM MARA UP TO 10 ROWS.
CONCATENATE 'Material' CON_TAB
'Materialart' CON_TAB
'Warengruppe' CON_TAB
'Bruttogewicht' CON_NEWL
INTO WA_BIN.
APPEND WA_BIN TO IT_BIN.
LOOP AT ITAB.
WRITE ITAB-BRGEW TO BRGEW.
CONCATENATE ITAB-MATNR CON_TAB
ITAB-MTART CON_TAB
ITAB-MATKL CON_TAB
BRGEW CON_NEWL
INTO WA_BIN.
APPEND WA_BIN TO IT_BIN.
ENDLOOP.
ATT_TYPE = 'XLS'.
SUBJECT = 'My XLS attachment'.
DESCRIBE TABLE IT_BIN LINES N10.
N10 = ( N10 - 1 ) * 255 + STRLEN( WA_BIN ).
IT_LENGHT = N10.
CALL METHOD DOCUMENT->ADD_ATTACHMENT
EXPORTING
I_ATTACHMENT_TYPE = ATT_TYPE
I_ATT_CONTENT_HEX = IT_BIN
I_ATTACHMENT_SIZE = IT_LENGHT
I_ATTACHMENT_SUBJECT = SUBJECT.
ENDFORM. "XLS_ATT
Perhaps it helps.
regards, Dieter -
Send Excel as attachment in Email
Hi,
I have an excel file attached as the original to a DIR.
I want to send this excel file as an attachment in the external email.
I am retrieving the data contents of original file in binary format using CVAPI_DOC_CHECKOUTVIEW
Then I am converting binary to text using SCMS_BINARY_TO_TEXT
and then sending the email with the data file as attachment using SO_DOCUMENT_SEND_API1.
However, this attachment does not open when its type is .xls
It does open with .txt, but the file is distorted and in non-understanable format.
Regards,
Reemahi,
Check this Out...
REPORT ZEMAIL_ATTACH .
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
Regards,
Santosh -
Sending Excel as attachment in Email (Unicode)
Hi,
I'm using SO_NEW_DOCUMENT_ATT_SEND_API1 FM to send excel attachments as emails to external addresses.
However, this the SAP upgrade to ECC6.0 from R/3 4.6B
then I cannot open BIG5 char excel, who does know how to sending Unicode excel as attachment in email.
the Excel can show Chinese , BIG5 code ,Japanese ,Korea .
OR which new funciton module in ECC6.0 like SO_NEW_DOCUMENT_ATT_SEND_API1 FM .
Regards,
HankHey,
try this one.
lv_string = str_data1.
cl_bcs_convert=>string_to_solix(
EXPORTING
iv_string = lv_string
iv_codepage = '4103' "suitable for MS Excel, leave empty
iv_add_bom = 'X' "for other doc types
IMPORTING
et_solix = binary_content
ev_size = size ).
CATCH cx_bcs.
MESSAGE e445(so).
ENDTRY.
send_request = cl_bcs=>create_persistent( ).
Now create document object from internal table with text
document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = main_text
i_subject = l_var ).
document->add_attachment(
i_attachment_type = 'xls' i_attachment_subject = ' Details' i_attachment_size = size
i_att_content_hex = binary_content ).
add document object to send request
send_request->set_document( document ).
--------- add recipient (e-mail address) -----------------------
create recipient object
recipient = cl_cam_address_bcs=>create_internet_address( abc at abc.com).
recipient = cl_cam_address_bcs=>create_internet_address( 'abc at abc.com' ).
add recipient object to send request
send_request->add_recipient( recipient ).
sent_to_all = send_request->send( i_with_error_screen = 'X' ).
COMMIT WORK.
This will definitely work .if any doubts aask me.
Neeraj -
End the result of an sql query by Email as an excel file attachement
Hi,
I would like to create a PL/SQL function that send the result of an sql query by Email as an excel file attachement.
i'm newbie in pl/sql an d i dont know if it's possible to do such task.
regards,i think a regular expression is he way to go in your case...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com -
Urgent: Sending an Email with Excel sheet attachment
Hi All,
I am preparing a report and has to send mail with excel sheet attachement. In report i am getting everything fine. But in the mail i am not getting the data, data is passing to the FM succesfully. But in the mail, excel is not having full data.
the below mentioned is my code.
i_texts-line = c_stern.
i_texts-line+254(1) = c_newline.
APPEND i_texts.
LOOP AT i_texc.
i_att_line-line = i_texc.
APPEND i_att_line.
ENDLOOP.
DATA: wa_doc_chng LIKE sodocchgi1.
DATA: w_tab_lines LIKE sy-tabix.
STATICS: c_body_start TYPE i VALUE '1'.
CONSTANTS: lc_filename(10) TYPE c VALUE 'Attachment',
lc_atthead(30) TYPE c VALUE 'Manually released invoices'.
DATA: i_objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: w_doc_name(30) TYPE c.
DATA: l_text1(15),
l_text2(12),
l_text3(15),
l_text4(15),
l_text5(14),
l_text6(17),
l_text7(10),
l_text8(20),
l_text9(19),
l_text10(19),
l_text11(19),
l_text12(16),
l_text13(20),
l_text14(19),
l_text15(19),
l_text16(30).
DATA: DATE(10),
DT(2),
MON(3),
YR(4),
lc_final(50).
CLEAR: i_texts, i_reci,i_att_line. "i_bname,
REFRESH: i_texts, i_reci,i_att_line. "i_bname,
WRITE sy-datum TO w_datex.
WRITE sy-uzeit TO w_timex.
l_text1 = text-003.
l_text2 = text-004.
l_text3 = text-005.
l_text4 = text-006.
l_text5 = text-007.
l_text6 = text-008.
l_text7 = text-009.
l_text8 = text-010.
l_text9 = text-011.
l_text10 = text-012.
l_text11 = text-013.
l_text12 = text-014.
l_text13 = text-015.
l_text14 = text-016.
l_text15 = text-017.
l_text16 = text-026.
CONCATENATE
l_text1
l_text2
l_text3
l_text4
l_text5
l_text6
l_text7
l_text8
l_text9
l_text10
l_text11
l_text12
l_text13
l_text14
l_text15
l_text16
INTO i_texts SEPARATED BY
c_horz_tab.
i_texts-line+254(1) = c_newline.
APPEND i_texts.
CLEAR i_texts.
LOOP AT i_texc.
i_att_line-line = i_texc.
APPEND i_att_line.
ENDLOOP.
LOOP AT so_rec.
i_reci-receiver = so_rec-low.
i_reci-express = 'X'.
i_reci-rec_type = 'U'.
APPEND i_reci.
ENDLOOP.
DESCRIBE TABLE i_texts LINES w_tab_lines.
READ TABLE i_texts INDEX w_tab_lines.
wa_doc_chng-doc_size = ( w_tab_lines - 1 ) * 255 + STRLEN( i_texts ).
wa_obj_name = 'ZFI_XX_REL_BLOCKED_INVOICE_01'.
DT = SY-DATUM+6(2).
MON = SY-DATUM+4(2).
YR = SY-DATUM+0(4).
CONCATENATE DT MON YR INTO DATE SEPARATED BY '-'.
CONCATENATE lc_atthead date into lc_final separated by ' '.
MOVE lc_final
TO wa_obj_descr .
wa_doc_chng-obj_name = wa_obj_name.
wa_doc_chng-obj_descr = wa_obj_descr.
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 0.
i_objpack-body_num = w_tab_lines.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
APPEND LINES OF i_att_line TO i_texts.
LOOP AT i_arseg INTO wa_arseg.
i_xmplt_d-belnr = wa_arseg-belnr.
i_xmplt_d-budat = wa_arseg-budat.
i_xmplt_d-bukrs = wa_arseg-bukrs.
i_xmplt_d-lifnr = wa_arseg-lifnr.
i_xmplt_d-name1_lifnr = wa_arseg-name1_lifnr.
i_xmplt_d-wrbtr = wa_arseg-wrbtr.
i_xmplt_d-waers = wa_arseg-waers.
i_xmplt_d-ebeln = wa_arseg-ebeln.
i_xmplt_d-ebelp = wa_arseg-ebelp.
i_xmplt_d-reason = wa_arseg-reason.
i_xmplt_d-dmeng = wa_arseg-dmeng.
i_xmplt_d-dwert = wa_arseg-dwert.
i_xmplt_d-bname = wa_arseg-bname.
i_xmplt_d-name_text = wa_arseg-name_text.
i_xmplt_d-udate = wa_arseg-udate.
i_xmplt_d-comment = wa_arseg-comment.
APPEND i_xmplt_d.
ENDLOOP.
LOOP AT i_xmplt_d.
CONCATENATE i_xmplt_d-belnr
i_xmplt_d-budat
i_xmplt_d-bukrs
i_xmplt_d-lifnr
i_xmplt_d-name1_lifnr
i_xmplt_d-wrbtr
i_xmplt_d-waers
i_xmplt_d-ebeln
i_xmplt_d-ebelp
i_xmplt_d-reason
i_xmplt_d-dmeng
i_xmplt_d-dwert
i_xmplt_d-bname
i_xmplt_d-name_text
i_xmplt_d-udate
i_xmplt_d-comment
INTO i_texts SEPARATED
BY c_horz_tab.
i_texts-line+254(1) = c_newline.
APPEND i_texts.
CLEAR i_texts.
ENDLOOP.
DESCRIBE TABLE i_texts LINES w_tab_lines.
READ TABLE i_texts INDEX w_tab_lines.
wa_doc_chng-doc_size = ( w_tab_lines - 1 ) * 255 + STRLEN( i_texts ).
DESCRIBE TABLE i_texts LINES w_tab_lines.
i_objpack-transf_bin = ' '.
i_objpack-head_start = 0.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = w_tab_lines.
i_objpack-doc_type = 'XLS'.
i_objpack-obj_name = 'Attachment'.
i_objpack-obj_descr = w_doc_name.
i_objpack-obj_descr = lc_filename.
i_objpack-doc_size = w_tab_lines * 255.
APPEND i_objpack.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
TABLES
packing_list = i_objpack
contents_txt = i_texts
receivers = i_reci
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
WRITE: / 'Error in send E-Mail' .
ENDIF.
please revert me asap. It is very urgent to me. thanks in advance.
ByehI
Have you build your Excel Data table to get attachement in Mail? If no then please find the Eg. code for your reference to send Excel attachment..
* End of Selection Event : Displaying the selected data *
END-OF-SELECTION.
PERFORM EMAIL_EXCEL_ATTACHMENT.
******///form
FORM EMAIL_EXCEL_ATTACHMENT .
* Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
* Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
* Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING S_EMAIL
TEXT-042
C_XLS
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
ENDFORM. " EMAIL_EXCEL_ATTACHMENT
********///form BUILD_XLS_DATA_TABLE
FORM BUILD_XLS_DATA_TABLE .
DATA : LV_NETWR(20) TYPE C,
LV_BOL_DATE(20) TYPE C,
LV_KAWRT(20) TYPE C,
LV_FKDAT(20) TYPE C,
LV_WAERK(20) TYPE C,
LV_KURRF(20) TYPE C,
LV_SHIPDATE(20) TYPE C,
LV_DEPTDATE(20) TYPE C.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF. "#EC *
DATA STR TYPE STRING.
**********/ this parameter concatenate to get headers
CONCATENATE STR
'SLNO'
'OWNER'
'SERIAL NO'
'FROM'
'DESTINATION'
'INVOICE VALUE'
'DESCRIPTION'
'CUSTOMER NAME'
'BL NUMBER'
'BL DATE'
'VESSEL NAME/AIRLINE DETAILS'
'MODE OF TRANSIT'
'SHIPPING MARKS'
'DUTY SUM INSURED'
'FLAG'
'OPEN COVERNO'
'INVOICE DATE'
'INVOICE NO'
'LC WORDING'
'QUANTITY'
'PACKAGING DETAILS'
'BASIS OF VALUATION'
'EXCLUDE WAR SRCC'
'CURRENCY'
'EXCHANGE RATE'
'ADDRESS'
'VESSEL BUILT YEAR'
'VESSEL FLAG'
'VOYAGE NO'
'SHIPMENT DATE'
'DEPARTURE DATE'
'SURVEYOR COUNTRY'
'SURVEYOR CITY'
'SURVEYOR AGENT'
'SURVEYOR ADDRESS'
'EXPORT CONSIGNMENT'
'CONTAINER DETAILS'
CL_ABAP_CHAR_UTILITIES=>CR_LF INTO STR SEPARATED BY CON_TAB.
LOOP AT IT_FINAL.
*******/ this is to pass body / row data
WRITE : IT_FINAL-NETWR TO LV_NETWR, "#EC UOM_IN_MES
IT_FINAL-BOL_DATE TO LV_BOL_DATE,
IT_FINAL-KAWRT TO LV_KAWRT, "#EC UOM_IN_MES
IT_FINAL-FKDAT TO LV_FKDAT,
IT_FINAL-WAERK TO LV_WAERK,
IT_FINAL-KURRF TO LV_KURRF,
IT_FINAL-SHIPDATE TO LV_SHIPDATE,
IT_FINAL-DEPTDATE TO LV_DEPTDATE.
CONCATENATE
STR
IT_FINAL-SLNO
IT_FINAL-OWNER
IT_FINAL-SRNO
IT_FINAL-PORT_LOAD
IT_FINAL-PORT_DSCHR
LV_NETWR
IT_FINAL-DESCRIP
IT_FINAL-CUSTNAME
IT_FINAL-BOL_NUM
LV_BOL_DATE
IT_FINAL-VESSELNAME
IT_FINAL-SHP_TYPE
IT_FINAL-SHP_MARK
LV_KAWRT
IT_FINAL-FLAG
IT_FINAL-OPEN_CONO
LV_FKDAT
IT_FINAL-VBELN
IT_FINAL-LC_WORD
IT_FINAL-QUANT
IT_FINAL-PACKDETL
IT_FINAL-INCO1
IT_FINAL-EXCWSR
LV_WAERK
LV_KURRF
IT_FINAL-ADDPAY
IT_FINAL-VESSBYR
IT_FINAL-VESSFLG
IT_FINAL-VOY_FLY_NO
LV_SHIPDATE
LV_DEPTDATE
IT_FINAL-SURCOUNT
IT_FINAL-INCO2
IT_FINAL-EXPORT_CON
IT_FINAL-SURAGT
IT_FINAL-SURADD
IT_FINAL-CONTRNO
CL_ABAP_CHAR_UTILITIES=>CR_LF INTO STR SEPARATED BY CON_TAB.
ENDLOOP.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = STR
TABLES
FTEXT_TAB = IT_ATTACH.
ENDFORM. " BUILD_XLS_DATA_TABLE
******// form POPULATE_EMAIL_MESSAGE_BODY
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
IT_MESSAGE = TEXT-043. " Please find attached Insurance Certificate details
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*******'/ form SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* text
* -->PIT_MESSAGE text
* -->PIT_ATTACH text
* -->P_EMAIL text
* -->P_MTITLE text
* -->P_FORMAT text
* -->P_FILENAME text
* -->P_ATTDESCRIPTION text
* -->P_SENDER_ADDRESS text
* -->P_SENDER_ADDRES_TYPE text
* -->P_ERROR text
* -->P_RECIEVER text
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER. "#EC *
DATA: LD_ERROR TYPE SY-SUBRC, "#EC *
* LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
* LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC. "#EC *
* ld_email = p_email.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
* Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
* Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
* Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
DESCRIBE TABLE IT_ATTACH LINES W_CNT.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
W_CNT * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
* Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'raw'.
APPEND T_PACKING_LIST.
* Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
* Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT S_EMAIL.
T_RECEIVERS-RECEIVER = S_EMAIL-LOW.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
* Populate zerror return code
LD_ERROR = SY-SUBRC.
* Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. " SEND_FILE_AS_EMAIL_ATTACHMENT
*******/form
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* text
* --> p1 text
* <-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*********end of code to trigger mail in excel format....
If any other help please let me know......
I am sure this example code will help you to resolve your problem...
please analyse above code for your requirement...
In my scenario the message you said is not displaying.....
Reward Points -
Email attachment problems with "excel" files.
I have just upgraded to the iphone 4 from the 3gs and since doing so any emails I receive with excel files attached will not open the attachment? These files openened with no problem on the same email account on my 3gs.
Instead when I download the attachment and go to open it I am met with a page displaying....
"Unable to read document.
An error occured while reading the document."
Has anyone else having this problem or even better anyone know what the fix is to get these files showing up?
Any help would be appreciated,
KrisAfter much frustration about excel files not opening and repeatedly not getting answers from apple, I think I might have found another way. It seems that the new apple OS does not support older versions of excel. By saving the excel file in question (Save As) to "Microsoft Excel 2007 Workbook" the Workbook opens just fine as an E-mail attachment. If you have macro's you can save as "Microsoft Excel 2007 Workbook (Macro Enabled)" and it works also.
The Workbook in question as far as I was concerned was created in Microsoft Excel 2003.
Hope this helps
Apple needs to get on the ball. This was almost a dealbreaker with me.
Android is looking better and better every day. -
Error when sending excel as email attachment
Hi All,
I am sending excel document as email attachment through F.M. SO_DOCUMENT_SEND_API1. I am getting the attachment but when i open it, it is giving error "The file is not in recognizable format....."
Please let me know how can i solve this problem.
Regards,
SabaHi Saba,
Check this link I think will surely help.
[http://www.sap-img.com/abap/sending-email-with-attachment.htm]
Regards,
Amit. -
I am trying to store an email attachment (an Excel spreadsheet) somewhere on my iPhone 5 to be able to access it easily in the future. I do not need the ability to work on it, just to access it, although it would be convenient if i could load updated versions over it on a regular basis. The spreadsheet was created in Excel on a laptop with Win 7. I read one posting that said I should save the document to iBooks and then could open it whenever I wanted. The same posting refered to something in the upper right corner of the attachment that enabled me to save it to iBooks. Unfortunately, there is no such option showing when I looked at the file, which I did email to myself. I was able to open the attachment, but can't get beyond this point. My tech ability doesn't go much beyond being able to power up my phone, so I need a really simple solution, if one exists.
First of all, Excel file can't save to iBook. (iBook only can view PDF files). That's why you don't see it in "open in" options. In order for you to save excel, you will need a third party app like Numbers, Office2. There are a few free apps that can use to view. I used Office2 from Byte2, because I can not only store and view later, I can do some edit too. Especially when you want to edit a few numbers and re send them to my office or clients will be very useful for me.
-
How to convert a workbook into PDF and broadcast as Email attachment
Hello Gurus,
i have installed the ADS (Adobe Document services). I would like to broadcast workbooks as a pdf file to some user.
When i open the workbook and go to Broadcast --> Setup a broadcast setting for this workbook. The distribution type is
Broadcast E-mail; Broadcast E-mail (Bursting); Broadcast Portal; Broadcast Multichannel and Output Format only MS Workbook and Link to current Data. Here i miss the possibility as PDF.
Where can i set up that the workbook should be broadcast as PDF.
Any help appreciated.
Thanks and kind rgerads,
MuratThanks all for your answers,
i also read that with changing the format in Report designer then broadcasting via PDF. Is there no possibility for PDFs for MS Excel Workbooks? How does it work when opening the query in Report designer? What do i have to do there but it is no solution for us because in the workbooks we use GET BEX DATA formulas and just show parts of the analyisis grid. I need a proper solution how to use broadcaster converting workbooks into PDF an send them as email attachment
Thanks,
Murat -
.pdf, Word, and Excel email attachments are not recognized
I have something very weird happen. For the past 2 weeks or so, when I recieve a pdf file as an email attachment, and I try to open it I get a message that the file is corrupt. If I go to my husband's PC, I can open the file, which means it is not corrupt. I have tried with Preview (and Acrobat Adobe Pro 9.2.0) to double-click the file, no result. I have also saved on the desktop, and double-clicked; lastly, I tried to open from within both Preview and Acrobat. Nothing makes the files open. I had some of the files resent, as I wanted to make sure, nothing works.
Does anyone have an idea what's going on? Also, files I have saved on the HD a while back open without any problems whatsoever.
Thanks for any feedback.If they're really PDF files have whoever's sending them zip them first. BTW, what's with the Word and Excel files in the title? You didn't say anything about those.
Maybe you are looking for
-
Go Pro changed my info (metadata) in iPhoto
Hello all, I was wondering if anyone could help with a strange issue that occurred to me today, my iphoto library has gone crazy since i took images off a GoPro and it managed to change all dates on ALL the events and individual photos in my library,
-
How to silence the startup sound?
My MacPro emits the startup chord, loundly, from the internal speaker. All other sounds come from the external speakers. When I get home late it's like to wake the dead if I turn on my Mac. This did not work this way before, the startup sound played
-
i got a brand new unlocked iphone 5... i opened, turned it on, set up everything but i didnt connect the phone to itunes, so... the phone was NOT activated... i put the sim card then it couldnt get any signal... so i decided to restore the phone usin
-
How to Create a blog for a Website
Hello, I am currently working with a client on a web site and they were thinking about adding a blog to their site, and to be honest I have no clue how to do such a thing. Does any one have any ideas, or could anyone stear me in the right direction a
-
I seek exemple of codes in labview for programming a robot
Hello, I have a project and i seek codes programming in labview for move an lego mindstorm. It's for have an idea on how use labviex for move or turn the robot Thanks