Excel formulas are disappearing in Input Template when i was refreshing

Hi Guys,
Early we are worked on 7.5.07NW(Admin and Excel),in that General excel formulas are worked fine in Input Template as per my requirements but now we changed from SP07 to SP10(Admin and Excel),.Now we are entering any excel formulas in Input Template(Middle and First), The formula will disappearing when i was refreshing.
Kindly help to me
Thanks
BrahmaReddy

Hi,
If you have formula in a cell which is part of the expansion range, then the formula will disappear when you expand / refresh. However, if you put the formula in the first cell of the data region, then the same formula will be copied to the other cells, depending on your expansion.
The removal of formula will not happen if you have a static template.
Hope this helps.

Similar Messages

  • How do i get rid of old rented movies that are a week over due when it was only a one day rental?

    hi, i have been trying to get rid of my rented movies that keep wanting to download and they are using up all my space on the ipod. because of this i have to restore my ipod every time i try to use it because of the two movies "The Proposal" and "Me, Myself, and Irene" and it is keeping me from watching a newly rented movie "Beowulf". i would like it if the two movies "The Proposal" and "Me,Myself, and Irene" were wiped off of my account so that i mat proceed with watching my other movies. this has been a hassle for me long enough. so please take the first two movies i mentioned off of my downlods list on my itunes account but not "Beowulf". thank you.

    Favicons usually expire after some time, but I don't know how long this takes.
    See also:
    *Bookmark Favicon Changer: https://addons.mozilla.org/firefox/addon/bookmark-favicon-changer/
    Try to remove all data stored in Firefox from that domain via "Forget About This Site" in the right-click context menu of an history entry (Show All History or History sidebar) or via the about:permissions page.
    Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
    You can't recover from this 'forget' unless you have a backup of the affected files.
    It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

  • When I create a PDF from Excel, there are blank cells in Excel document, when they convert to PDF the blank cells have data in them?

    There are cells in the excel document that have formula's in them.  The formulas are pulling data from other blank cells, so that is why they are blank in the formulated cells.  So in Excel, they are just a dash.  When I create the PDF, the document gets opened in Acrobat and the once blank cells have data in them.  Not sure why there is data in those fields on the PDF if its blank on Excel.

    Not really sure that I fixed the problem, but I did find a work around and wanted to post it if someone else runs across the same issue. Apparently the document creator used lots of custom rules and shading. If I pulled up the custom rules and shading palette and just unchecked both the custom ruling and shading boxes, it allowed me to create the print file correctly--the disappearing part numbers were on the new PDF. I didn't have to update the whole book which I didn't want to do because I feared it would mess up the rules and shading. Just unchecking the box before creating the PDF solved that issue for my purposes.

  • SAP BPC 10.0 NW - Delete excel formulas

    Hello Experts,
    I have both "Keep formula on data" chekboxes selected (inside Edit Report and inside Sheet Options) and in my computer when I refresh the workbook the formulas are not deleted, but in other computers, also with the same version of EPM add-in the formulas are deleted.
    Any ideas?
    Thanks,
    Nadine

    Hello Guys,
    I've tried to put the last 2 options selected as you said Nilanjan but no results.
    Rohit, the report is static. I've created the report with Insert new member functionality and so the values of some cells are coming from input forms and others are just excel formulas. When I open the report in my computer everything works, when I try to open it in other computers the Excel formulas are deleted...
    Do you have any ideia of what is happening?
    Thanks in advance,
    Nadine

  • Purged Disconnected Mailbox Date | Can I tell in Exchange when it was purged?

    We have a disconnected mailbox that has been purged and we are not able to determine when it was purged. Is there a way in Powershell or the GUI in Exchange 2007 that I can determine when the Exchange database purged the disconnected mailbox?

    it is possible to find the date on which the mailbox was disabled and it can be done using the command:
    Get-MailboxDatabase | Get-MailboxStatistics | Where { $_.DisconnectDate -ne $Null} | Select DisplayName,Database,Disconnect*
    if the mailbox is purged then i think there is a still possibility which we can use to query on a trial/error method.
    When the mailbox is disabled, you are basically removing exchange attributes and the Attributes like HomeMDB, RecipientTypeDetails, HomeMTA & msExchHomeServer will be set to $Null.
    So, based on the details if the AD Account still exists and removing the exchange attributes is the only change made to the Object then below query would help:
    Get-User SamAccountNameOfMailboxPurge | Fl Name,SamAccountName,DisplayName,WhenCreated,WhenChanged
    M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your question. ~~ This
    Information is provided is "AS IS" and confers NO Rights!!

  • BPC 7.5 NW: Inserting an excel formula the data col. in an EVDRE input sch.

    Hello,
    I am trying to design an input schedule for uploading trial balances from SAP. In one sheet, I have an extract of a trial balance from SAP. In another sheet, I have an EVDRE report which has an expansion in rows based upon the entities selected (so that the entities selected for data upload could match the entities in the trial balance. It is flexible for different users/regions).
    The problem is that I would like to use a VLOOKUP or SUMIF formula to populate the data column in the EVDRE report (pull the data from the trial balance sheet). But as soon as the data is submitted, the formula will disappear and I will just have data.
    Does anybody have any ideas as how this could be avoided.
    Many thanks.

    1. Login into BPC for Admin
    2. Once logged into your Appset , open the Dimension library
    3. Process each dimension by selecting the "Process members from membersheet" and by unchecking the "Take system offline" option
    4. Process all the dimensions one by one not together.
    5. Once processing the dimensions is done then open the Applications and Modify each Application by adding or changing the Application Description.
    6. Once done modifying Applications then logout of the BPC Admin and BPC Excel.
    7. Login back again into BPC for Excel by going through the connection wizard.
    Ideally this should solve your problem and If all the dimensions are processed successfully then logoff and login to see if you stilll see the EVDRE error.
    Hope this helps.
    Regards,
    Sanjeev

  • Tranport - EPM Inputs/Reports (Excel Formulas)

    Hi Everyone,
    Can you please some one help me to understand the BPC Transports from Dev to Quality box, the basic doubt I have got is that allowed to move excel formulas along with inputs/reports. (As I heard somewhere it is not possible to transport the local excel formulas along with inputs/reports structure)
    Regards,
    Satiish

    Hi Satish,
    The reports and input templates are transported as any other BPC object. You need to go to RSA1 - > transport connection -> more objects. Select your environment. From here, you can select the desired reports and the input templates.
    And all report/template formula are transported along with reports/templates.
    Please follow the link:-
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10947137-aadd-2f10-7b93-82ffed27728d?QuickLink=index&overridelayout=true&56972741190586
    Wish this helps..
    Regards,
    Bishwajit

  • Retrieving BEx Query Results Area for use in Excel formulas

    Hello,
    I run BEx queries in workbooks and then use Excel formulas ( mostly VLOOKUP(LookupValue, ResultsArea, ColumnReturned,) ) to retrieve certain information from the query ResultsArea.
    ****Problem:
    Depending on the query parameters, the query "Results Area" is larger or smaller.
    ****Non-optimal solution:
    One way to define the  ever changing Excel range occupied by the Results Area is to create an Excel name as:
    QueryRange = OFFSET(QueryFirstCell,,,COUNTA(OFFSET(Sheet1!$A:$A,,COLUMN(QueryFirstCell)-1,,)),COUNTA(OFFSET(Sheet1!$1:$1,ROW(QueryFirstCell)-1,,,)))
    Then, the only input required is the top-left cell of the Results Area, which stays the same (unless the query definition changes).
    ****Question
    What is the best way to refer to an ever-changing query Results Area in an Excel formula?
    Thank you!
    Louis

    It is actually much easier than that.
    Use a VBA statement like the following:
    Set RptRng = ActiveCell.CurrentRegion
    This will retrieve the data in the Results Area, no matter what the size is.
    Hope this helps...
    Bob

  • Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been usin

    Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been using adobe forms for 2 years with mass response feedback and have never had this problem.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Use a Excel template when saving a csv export

    Hi!
    I wonder if it is possible to use an excel template when export data from a report to excel? If so, is there anyone who have an example how to do this?
    Regards
    /Ulf Jonsson

    Hi Ulf,
    CSV is a generic standard for exchanging tabular data in flat files.
    You can not pass any processing instructions through CSV, for formatting or dynamic behavior in Excel.
    SYLK is a text-based interchange format for spreadsheets; it supports formulas, borders, fonts, point sizes, etc. SYLK is supported by Excel and other spreadsheet packages. SYLK is the RTF of spreadsheets. The problem with SYLK is that it is not well documented.
    Maybe you need to look after a license of Oracle BI Publisher for your Apex environment to do more sophisticated publishing.
    I have no experience with that.
    Regards,
    Martijn

  • Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

    having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
    I'm using Lion on an MBP and Numbers is the latest version

    May you give more details about what is wrong with your dates ?
    M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
    When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
    To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
    Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : http://public.me.com/koenigyvan
    Please : Search for questions similar to your own before submitting them to the community
    For iWork's applications dedicated to iOS, go to :
    https://discussions.apple.com/community/app_store/iwork_for_ios

  • Excel cell border disappears when converting to PDF (continued)

    Continuing from http://www.adobeforums.com/webx/.59b4dd40 which was archived already.
    I too am getting the problem in which Excel cell borders are disappearing from cells with a background color. Lowering the resolution to 300 dpi does not help.
    The borders are definitely disappearing. Printing the worksheet from Excel 2003 prints the cell borders. Printing the worksheet from the resulting PDF does not. I created the PDF using the Create PDF macro that Acrobat 9 adds to Excel.
    Here's the really odd thing: it only affects two adjacent cells in the same (first) row of the worksheet. Other cells with the same background color in the same columns or the same row are not affected, nor are the cells in other rows or columns.
    Copying similar cells that don't have the problem, then re-converting doesn't help.

    I just tested inserting a blank row 1 in the spreadsheet, moving the problem cells to C2 and D2, but the borders still disappear from those cells.
    Restoring back to C1 and D1, I note that if I copy the cell formats to other worksheets, the problem cells lose their borders on all worksheets.
    I then tested what happened if I specified No Color for C1 and D1. The problem transferred to cells G1 and H1, which had then become the first adjacent cells with background color.
    Restoring the background color to C1 and D1 transferred the problem back to C1 and D1, and removed the problem from G1 and H1.
    Next, I gave cell A1 a background color of white. This removed the problem from cells C1 and D1, and gave it to A1.
    Finally, I turned accessibility tagging off and that made the problem go away. However, I need tagging as we must post accessible documents.
    So now I have a consistent way to describe the problem: cell borders disappear from the first set of contiguous cells with background colors if tagging is turned on. I'm going to file this as a bug.
    Charles "Chas" Belov
    SFMTA Webmaster
    http://www.sfmta.com/webmaster

  • Installed Microsoft word on iPad The templates are underlined in English but when you open them they are in a different language

    have just installed Microsoft word on iPad all the templates are underlined in English but when you open them they are in a different language

    Regarding pseudo-latin template filler language, you can learn about that standard practice at
    http://en.wikipedia.org/wiki/Lorem_ipsum

  • The red colored "record ready" button has disappeared  from my track header area. The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).

    The red colored "record ready" button has disappeared  from my track header area.
    The other four buttons are showing fine, (input (i), hide (h), mute (m) and solo (s).
    Can anyone help me with this?
    Thanks
    Johnny

    Ahrenshof: Thank you for your suggestion:
    ((preferences>audio>devices  (re-select your input source) ))
    I already had that done IE. I had duet already chosen as input and output etc etc.
    The problem seemed to be the issue that was addressed by Eriksimon:
    (( ctrl-click the track Header.))
    Following that advice gave me a drop down menu which allowed the various buttons to be
    checked and unchecked.
    Thanks so much for taking the time out to
    help with my problem. It seems to me that
    this formum is far better equipped to handle
    user's problems than any or the options that
    are available on the acual Logic help menu.
    It appears that Logic has been put
    together by techies who, (though they
    may be brilliant at computer software issues), then have
    virtually no skill or imagination with regards explaining
    how to use it, to the actual users.
    I have a PhD in Egyptology. I mention this not
    because I think it a particularly brilliant acheivement
    but just to indicate that I am not a total dummy.
    More to the point I find using Logic needlessly tiresome
    and the explanations that are given in the "Help" menu
    are nothing short of tragic. Perhaps Apple could start to give
    out free ropes or razor blades to everyone who buys the program.
    Not to say it is not much better that the other junk out there, it is,
    the sorry fact is that that is not saying much at all.
    I send sincere thanks to all the users out there who support
    each other through this forum. johnnyloonybin

  • Having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

    having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

    Hi
    in this scenarion control is not going inside the condition
    if (vo.getRowCount() == 0) and therefore VO is not getting initialized
    why u are counting the row of VO to initialize the VO ,if possible pls remove this condition check ,problem will be solved .pls let me know in case of any issues.
    thanx
    Pratap

Maybe you are looking for