Exception "JMSSecurityException: Not permit" when starting Comms Channel...

Hi,
We have XI 3.0 that has been running without issues in the comms channels for a long time.
All of a sudden on one of our systems we are getting an error when starting the comms channel. The stacktrace is shown below:
Channel error occurred; detailed error description: com.sap.aii.adapter.jms.api.connector.ConnectorException: Error creating message consumer: javax.jms.JMSSecurityException: Not permitted
at com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildMessageConsumers(ConnectorImpl.java:446)
We have tried resrting the J2EE engine, the whole XI instance, etc. and still this one channel continues to fail.
I have tried creating new channels and they fail too.
Has anyone seen this error before? Any idea how to resolve this?
thanks
Brian

Hi Brain,
It is showing security exception, so it is related to the credentials (may if you use the passwords or certificates those are expired) so check those credentials validity.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/f5/2f2c4142aef623e10000000a155106/frameset.htm
Regards
Ramesh

Similar Messages

My Elements 9 is not responding when started Windows

My Elements 9 is not responding when started Windows.

Without proper system information and otehr details such as the crash log from the Event Viewer nobody can say much.
Mylenium

Intrerclue does not initialize when starting ff4.1 windows xp usually works after i uninstall, restart, reinstall, restart. what a pain...,

Intrerclue does not initialize when starting ff4.1 windows xp usually works after i uninstall, restart, reinstall, restart. what a pain..., love the app when it works.

Hi,
According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
For Windows boot process knowledge, you can refer to the contents of the link below for more details:
http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
Roger Lu
TechNet Community Support

Exception : SubjectManager not installed when doing Security.runAs()

Hi
I am getting an exception : Subjectmanager not installed while running Security.runAs(new Subject , .....
The problem occurs onley when there is only wlclient.jar in the classpath .
Anyone knows the solution
I don't want to add weblogic.jar in the classpath .

Sachin Shukla <> writes:
Initialization of the client jar is a hairy dance. It generally
happens implicitly when an ORB is created. This sounds like a use-case
we missed. If you create your initial context first it should probably
resolve itself.
andy
I am getting the exception "SubjectManager not installed" when calling Security.runAs with thin client jar. This is the first statement on entering main(). This error doesnt occur when using weblogic.jar.
I was doing this because the principal and credentials set on main thread, for JNDI authentication were getting passed to all the child threads. To evade this, I thought of calling the following code in every new thread - Security.runAs(new Subject(), new PriviledgedAction(){
public Object run(){
//do stuff
Thanks in advance
Sachin

Database does not open when starting NT service

Database does not open automatically when starting NT service. It can be opened manually only, through the one of administrative utilities. Can this problem occur due to small SGA size? (in my case - 32 Mb)
OS: Windows NT SP6
Database: 8.1.6
Ilya.

sounds more like your permissions aren't set correctly on the services startup menu. you could also have a post-job to run after the server restarts - using oradim you can start the service and the db all at once.

Exception handling in receiver sync SOAP comm channel

Hi experts,
We are developing following synchronous scenario: sRFC to SOAP.
In this, XI sends some data to an application and the application sends back the response. No problem so far.
However, this application can throw exceptions that we want to send back to SAP, these exceptions are not part of a message and we can only see them AS AN ERROR IN SXI_MONITOR in the receiver SOAP header, in the error tab, they look like:
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Questions:
Is there any way to get these exceptions from the application and send them back to SAP as if they were the SOAP.response message??
What if we select Keep headers in the receiver SOAP channel?
do we need to create a fault message type and assign it in ID?
Any ideas?
Best regards,
David

check for the possibility of raising an alert which has SXMS_TO_ADAPTER_ERRTXT as the Container variable....so if there is an error this alert variable will get populated and you will receive an alert....applicable only for adapter engine alert...
for more information: http://help.sap.com/saphelp_nw70/helpdata/EN/d0/d4b54020c6792ae10000000a155106/frameset.htm
Regards,
Abhishek.

Comm channel not available in RWB comm channel monitoring

Hi All,
I've gone through this(Comm channel missing in comm channel monitoring) unanwered forum. I've facing the same issue.
In my ID, I created XI receiver adapter comm. channel. And data is flowing successfully to the receiver side through this Comm. channel
I'm aware that XI adapter in ID is used to send data via Proxy.
But why i'm not see that in the Comm. channel monitoring in RWB. If anyone has documentation please let me know.
Thanks.

Hi ,
The XI adapter resides in Integration engine thus you cannot see it in RWB. RWB shows comm channels which are in adapter engine. The simple proof is that you cannot enhance this adapter with your own modules on the Module tab page in the module processor. Here is the link to documentation
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
regards
Anupam

Help screen not opening when start

plz help guys everday when i start opening my gt72 2qe laptop the screen is black and everthing is running all is running but the screen is not then i start to shake the display somtimes and turning on and off the laptop several times it goes normal at last but this happens everyday when i start opening the laptop helpl plz

If the display is normal when you connect to another monitor ,you can check whether the LCD cable loosing or not .

JMS resource not located when starting Weblogic 8.1 as windows service

I have a Weblogic 8.1 cluster which I am trying to configure as a Windows service.
          The managed servers startup up without errors when started from the command line, but when I start it up as a service they do not seem to find the JMSConnectionFactory that has been configured.
          Any ideas on what I am missing ?
          Malini

Can you post the error message? Are your custom connection factories targeted to the cluster?

Keyboard does not work when start up

I was trying to run a hardware test through Mac instal disc, but there was not response after I pressed D or C. I also could not hear the starting sound as usual, even I turned the loudest.
However, everything became normal again after the start up completed.
Can somebody help me please...

Can't remember at the mo exactly but make sure you have everything connected correctly. I think there is a not on the AHT that details where you can and can't plug in USB keyboards/mice.
Make sure that every other unnecessary peripheral is disconnected too.

UNIX Script Not running - Sender File Comm Channel

I have written a script to split a large file into smaller files . It works great when I log into the server via putty, and run it from the command prompt .
However, when I run it from the Sender File Channel "Run OS command before/after processing", nothing happens . I put in some code to write a log file after every line , but it never gets generated if I run the channel , so im assuming its never called by PI .
However, the channel monitoring says "Success" for "Execute OS command "/home/Int001/Inbound/File_Split.sh" . So if it is successfully called, how come i dont get my expected results?
1. What is the credentials used by PI to run scripts ?
2. Does PI need some special permissions to run the script ?

Hi Johannd,
To change Password for Sap System User, you can follow this help:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/aa/1dc94af0fa11d3a6510000e835363f/content.htm

Java Class not found when starting applet with ip address

Hi @all,
we use Application Server 10gR2 with Java 1.6.0_20 and we start the applet with an JNLP File.
When I use the url http://lhhap03/forms/java the applet starts as it should. But when I change the entry to http://192.168.17.208/forms/java i get the error:
Exception in thread "thread applet-oracle.forms.engine.Main-1" java.lang.NoClassDefFoundError: org/apache/regexp/RE
Now I´m a little bit confused why i can´t use the ip address instead of the dns name from the server?
Which config I have to change that i can get the access to jar libraries with the Ip - Address
Best regards
thomas

Problem Solved, I put many environment variables in the .bash_profile file, the CLASS_PATH will overwrite the weblogic server's classpath during startup.
Remove them and restart server solved my problem.

Resource not release when starting/stopping the deployed application

I am testing to deploy an standard web application on Weblogic 11gR1 at Windows XP. It is running and everything is working fine. But I noticed below situation which concersns about the release of resouce during stop and start deployed application by using Admin Server Console:
After the deployed application starting running in Weblogic, I go to Admin Server Console to select the deployed application at deployment section and click "stop\When work complete". It looks like that the deployed application was stopped and its state went to "Prepared". Then I start it again by click "Start\Servicing all requests". It started correctly. If I tried multiple times of "Start \ Stop" operations on this deployed application, then eventurally, I got "output memory" exception and Weblogic died. I wached the memory usage of Weblogic, when applying multiple times of 'start / stop' operation on an deployed application, the memory usage of weblogic continuese to grow and until "output memory" exception occurs.
Is it normal? What might be wrong when configuring weblogc? or somethng wrong for deployed application?
Anybody can provide any help would be great appreciated.
Thanks in advance.
Jim

Hi Mithun,
Thanks for your reply! If stopping the deployment need some time to finish, So, admin console of weblogic should disable ( grey out ) its starting button while the related deployed application is still shutting down. After the deployed application were stopped completely, then enable the starting button again to avoid the issue.
I just feel a little bit strange for the admin console of Weblogic to behavior on start / stop deployed application.
Thanks,
Zhiping

Buddy List window does not appear when starting iChat in Leopard

In Tiger when I started the iChat application, the Buddy List window always appeared immediately. In Leopard, it does not appear and I must choose Window from the menu bar and then select AIM Buddy List. Does anyone know how to correct this so the Buddy List window appears automatically when I start iChat in Leopard?

9:54 PM Wednesday; November 21, 2007

Audition CS 5.5 says "serial number not valid" when starting, but all other products work?!

Hi,
I use CS 5.5 Production Premium for quite some time now.
Today I tried to start Audition for the first time.
It gives me a choice to continue to use as a trial or provide the serial number.
When I enter my regular CS 5.5 s/n, it says "the serial number is not valid for this product".
All other products work.
What do I have to do to make Audition start?
Thanks,
Patrick

Error "The serial number is not valid for this product" | Creative Suite

Exception "JMSSecurityException: Not permit" when starting Comms Channel...

Similar Messages

Maybe you are looking for