JMS resource not located when starting Weblogic 8.1 as windows service

I have a Weblogic 8.1 cluster which I am trying to configure as a Windows service.
          The managed servers startup up without errors when started from the command line, but when I start it up as a service they do not seem to find the JMSConnectionFactory that has been configured.
          Any ideas on what I am missing ?
          Malini

Can you post the error message? Are your custom connection factories targeted to the cluster?

Similar Messages

Resource not release when starting/stopping the deployed application

I am testing to deploy an standard web application on Weblogic 11gR1 at Windows XP. It is running and everything is working fine. But I noticed below situation which concersns about the release of resouce during stop and start deployed application by using Admin Server Console:
After the deployed application starting running in Weblogic, I go to Admin Server Console to select the deployed application at deployment section and click "stop\When work complete". It looks like that the deployed application was stopped and its state went to "Prepared". Then I start it again by click "Start\Servicing all requests". It started correctly. If I tried multiple times of "Start \ Stop" operations on this deployed application, then eventurally, I got "output memory" exception and Weblogic died. I wached the memory usage of Weblogic, when applying multiple times of 'start / stop' operation on an deployed application, the memory usage of weblogic continuese to grow and until "output memory" exception occurs.
Is it normal? What might be wrong when configuring weblogc? or somethng wrong for deployed application?
Anybody can provide any help would be great appreciated.
Thanks in advance.
Jim

Hi Mithun,
Thanks for your reply! If stopping the deployment need some time to finish, So, admin console of weblogic should disable ( grey out ) its starting button while the related deployed application is still shutting down. After the deployed application were stopped completely, then enable the starting button again to avoid the issue.
I just feel a little bit strange for the admin console of Weblogic to behavior on start / stop deployed application.
Thanks,
Zhiping

How to avoid JMS validation when starting weblogic server

Hi All,
When starting up WebLogic server, it will validate JMS destinations one by one for deployed applications.
If I don't connect the VPN, then these JMS destinations are not reachable, and WebLogic Server will spend a lot of time to try connecting to these JMS destinations.
Thus it will take a lot of time to startup the WebLogic Server.
How can I disable JMS validation when starting weblogic server?
Thanks and Regards!

Hi Daniel,
By blank do you mean that the screen is black? Is it gray? Is it blue? The word "blank" is vague when trying to determine and isolate startup issues.

Error when starting Weblogic in debug mode

Hi there
Has anyone experienced any difficulties when starting weblogic in debug mode.
More specifically, it cannot start correctly because it thinks that another instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unable to create
a server socket for port: 8320. java.net.BindException: Address already in use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic
Server is no longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Server shutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Server shutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)

Thanks for the suggestion.
Unfortunatley the port is definately free/available during startup.
Stephane Kergozien <[email protected]> wrote:
Maark,
Before starting your server, please could you check that the port is
not used by one
other process. You can use the netstat command to do this.
Regards
Stephane
Mark wrote:
Hi there
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address alreadyin use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <TheWebLogic
Server is no longer listening for connections. You should probablyrestart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdownsequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Servershutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unableto load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)--
Regards,
Stephane Kergozien
BEA Support

MDB deployement error in Glassfish - "JMS resource not created"

Hi,
I'm tring to deploy a J2EE application which has couple of MDBs in Glassfish 2.1. I get the following error when I deploy the EAR file to the app server. I've cofigured JMS resources using admin console but still getting this error. I've no experience of JMS, I'm not sure if I've configured it correctly. Any step-by-step guide with screenshots would be very useful, but can't find any. Please help me if you have any idea what I'm doing wrong. Thanks in advance.
 
[#|2009-03-05T13:09:10.143+0000|SEVERE|sun-appserver2.1|javax.enterprise.system.container.ejb|_ThreadID=35;_ThreadName=Thread-3757;com.sun.enterprise.connectors.ConnectorRuntimeException: JMS resource not created : ;_RequestID=075ba53a-1835-482d-9db7-fe79fe1f1eb3;|EJB5090: Exception in creating EJB container <a href="http://forums.sun.com/#" class="jive-link-anchor"></a> 
 
[#|2009-03-05T13:09:10.143+0000|SEVERE|sun-appserver2.1|javax.enterprise.system.container.ejb|_ThreadID=35;_ThreadName=Thread-3757;_RequestID=075ba53a-1835-482d-9db7-fe79fe1f1eb3;|appId=cdm moduleName=cdm-ejb_jar ejbName=SupplierEJB|#] 
 
[#|2009-03-05T13:09:10.143+0000|SEVERE|sun-appserver2.1|javax.enterprise.system.core.classloading|_ThreadID=35;_ThreadName=Thread-3757;_RequestID=075ba53a-1835-482d-9db7-fe79fe1f1eb3;|LDR5004: UnExpected error occured while creating ejb container 
com.sun.enterprise.connectors.ConnectorRuntimeException: JMS resource not created : 
at com.sun.enterprise.connectors.system.ActiveJmsResourceAdapter.getPhysicalDestinationFromConfiguration(ActiveJmsResourceAdapter.java:1591) 
at com.sun.enterprise.connectors.system.ActiveJmsResourceAdapter.updateMDBRuntimeInfo(ActiveJmsResourceAdapter.java:1421) 
at com.sun.enterprise.connectors.inflow.ConnectorMessageBeanClient.setup(ConnectorMessageBeanClient.java:170) 
at com.sun.ejb.containers.MessageBeanContainer.<init>(MessageBeanContainer.java:209) 
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:524) 
at com.sun.enterprise.server.AbstractLoader.loadEjbs(AbstractLoader.java:527) 
at com.sun.enterprise.server.ApplicationLoader.doLoad(ApplicationLoader.java:191) 
at com.sun.enterprise.server.TomcatApplicationLoader.doLoad(TomcatApplicationLoader.java:126) 
at com.sun.enterprise.server.ExtendedApplicationLoader.doLoad(ExtendedApplicationLoader.java:134) 
at com.sun.enterprise.server.AbstractLoader.load(AbstractLoader.java:238) 
at com.sun.enterprise.admin.server.core.jmx.SunoneInterceptor.invoke(SunoneInterceptor.java:304) 
at com.sun.enterprise.interceptor.DynamicInterceptor.invoke(DynamicInterceptor.java:174) 
at com.sun.enterprise.deployment.client.DeploymentClientUtils.startApplication(DeploymentClientUtils.java:159) 
at com.sun.enterprise.deployment.client.DeployAction.run(DeployAction.java:538) 
at java.lang.Thread.run(Thread.java:619) 

Hi Nigel,
Thanks for ur reply. In my ejb-jar.xml I have
<?xml version="1.0" encoding="UTF-8"?>

<ejb-jar version="2.1" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
<display-name>myJARName</display-name>
<enterprise-beans>
 <message-driven>
 <display-name>myEJB</display-name>
 <ejb-name>myEJB</ejb-name>
 <ejb-class>com.mycompany.app.mdb.MyMessageBean</ejb-class>
 <messaging-type>javax.jms.MessageListener</messaging-type>
 <transaction-type>Container</transaction-type>
 <message-destination-type>javax.jms.Queue</message-destination-type>
 <message-destination-link>MyQueue</message-destination-link>
 <activation-config>
 <activation-config-property>
 <activation-config-property-name>destinationType</activation-config-property-name>
 <activation-config-property-value>javax.jms.Queue</activation-config-property-value>
 </activation-config-property>
 </activation-config>
.......So I've created JMS resource with same JNDI name and Physical destination name (both are MyQueue). I don't see any different JNDI name in ejb-jar.xml. Is it nor right?

It says "request resource not found" when trying to restore my iphone 4s

it says "request resource not found" when trying to restore my iphone 4s

This article is for iPhones that are unable to be restored.
You may have to try recovery mode (as described below) more than once.
http://support.apple.com/kb/HT1808

My Elements 9 is not responding when started Windows

My Elements 9 is not responding when started Windows.

Without proper system information and otehr details such as the crash log from the Event Viewer nobody can say much.
Mylenium

Intrerclue does not initialize when starting ff4.1 windows xp usually works after i uninstall, restart, reinstall, restart. what a pain...,

Intrerclue does not initialize when starting ff4.1 windows xp usually works after i uninstall, restart, reinstall, restart. what a pain..., love the app when it works.

Hi,
According to your description, in my opinion, it seems like not bcd file problem. It's PC itself problem, maybe a hardware problem, also can be system componments corrupt.
Can this PC startup successfully if you choose reboot or shutdown PC? Or this problem just occures after resume system from hibernate?
For Windows boot process knowledge, you can refer to the contents of the link below for more details:
http://social.technet.microsoft.com/wiki/contents/articles/11341.the-windows-7-boot-process-sbsl.aspx
For your problem, in my opinion, it would be better to use System installation to fix this system file for test.
Roger Lu
TechNet Community Support

Problem when start lightroom 6 on my windows 8.1 notebook

I have a problem when start lightroom 6 on my windows 8.1 notebook, the system says "impossible find input point in _crtCreateSymbolicLinkW in C:\windows\system32\msvcp110.dll", and lightroom 6 terminate. I disinstalled and reinstalled many times but I have always the same error. What is the problem? Thank for the answers.

Download update 4 for Intel x64 or Amd if your notebook have an Amd CPU of Visual studio 2012 and trya again. Before you can controll if the installer install library of visual studio 12 during installation and see if the library missing is on windows\system32.

Can we start Node server as a windows service?

Hi,
I am starting admin server, managed server as windows service. I've also started node manager as windows service on a node machine. But, now if i want to start the node server, I am starting it from windows console. Instead of this, can i start the node server as windows service? If yes, please give the details.
Thanks

When you also want the WebLogic Server as a service - Re: Installing Weblogic Admin Server as service - service won't start

Starting Hyperion 9.3.1 Windows services

Hi All.
I use Hyperion 9.3.1
In what order should i start hyperion 9.3.1 windows services.
Thanks.

Hi,,
Here is the starting order,,,,,,,,and stop order should be exactly in reverse.
Hyperion S9 OpenLDAP
Hyperion S9 Shared Services
Hyperion S9 Administration Services WLS9
HyperionRMIRegistry
Hyperion S9 BI+ 9.3 Core Services 1
Hyperion S9 BI+ 9.3 Interactive Reporting Service 1
Hyperion S9 Planning
Hyperion S9 BI+ 9.3 Financial Reporting Java RMI Registry
Hyperion S9 BI+ 9.3 Financial Reporting Print Server
Hyperion S9 BI+ 9.3 Financial Reporting Report Server
Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server
Integration Server
Hyperion S9 EPM Architect Data Synchronization WLS9
Hyperion S9 EPM Architect Process Manager
Hyperion S9 EPM Architect Web WLS9
Hyperion S9 EPM Architect Engine Manager
Hyperion S9 EPM Architect Event Manager
Hyperion S9 EPM Architect Job Manager
Hyperion S9 BI+ 9.3 Workspace
Hyperion S9 Apache 2.0
Hyperion S9 BI+ 9.3 Financial Reporting Web application
Hyperion S9 BI+ 9.3 Web Analysis
Hyperion S9 Provider Services WLS9
IIS Admin Service
World Wide Web Publishing Service
Hyperion S9 Financial Management DME Listener
HFMWebServiceManager
Hyperion S9 Financial Data Quality Management Task Manager Service
-K-

Need to host weblogic server as a windows service

Hi,
I need to host weblogic server as a windows service, Along with the log file in which I can log the System.out.println statements.
I am having weblogic server 10.3.4
Thanks in advance
Harshal

Hi Harsgal,
You can use the Windows Service configuration script mentioned in the following link:
http://middlewaremagic.com/weblogic/?page_id=2594#comment-3454
Ans as you mentioned that you want to see the System.out.println statements also in the server.log then in that case please add the JAVA_OPTION in the same script mentioned in the above link as *"-Dweblogic.log.RedirectStdoutToServerLogEnabled=true"*
Example:
echo off
SETLOCAL
set DOMAIN_NAME= Test_Domain
set USERDOMAIN_HOME= C:\BEA103\user_projects\domains\Test_Domain
set SERVER_NAME=ManagedServer1
set PRODUCTION_MODE=true
set WL_HOME=C:\bea103\wlserver_10.3
set ADMIN_URL=http://AdminServerHostname:7001
set MEM_ARGS=-Xms1024m -Xmx1024m -Dweblogic.log.RedirectStdoutToServerLogEnabled=true
call "%WL_HOME%\server\bin\installSvc.cmd"
Topic: Managed Server As Windows Service
http://middlewaremagic.com/weblogic/?p=680
Also if you want to create a Separate STDOUT and STDERR file to collect your System.out.println Statements then please add the following MEM_ARGS as well inside your script:
JAVA_OPTIONS=-Dweblogic.Stdout=D:\bea_home\wlserver_10.0.2\user_projects\domains\syncro_domain\ASstdout.txt -Dweblogic.Stderr=D:\bea_home\wlserver_10.0.2\user_projects\domains\syncro_domain\ASstderr.txtThanks
Ravish Mody

Native VM not supported error when start WebLogic Server on Solaris

I created a weblogic domain and server using configuration wizard from workshop 8.1, the JVM is jdk142_05. When I start weblogic server, get follwing error: native VM not supported. The enviroment is
Solaris.
We used the same jdk started medrec example without problem. Any idea for the possible cause?
Thank any one who can help.
Zhong
uberpeer% ./startWebLogic.sh
JAVA Memory arguments: -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=:/rg2/opt/bea/weblogic81/server/lib/weblogic_knex_patch.jar:/rg2/opt/bea/weblogic81/common/lib/log4j.jar:/rg2/opt/bea/weblogic81/server/lib/debugging.jar:/rg2/opt/bea/weblogic81/server/lib/knex.jar:/rg2/opt/bea/weblogic81/javelin/lib/javelin.jar:/rg2/opt/bea/weblogic81/server/lib/wlw-lang.jar:/rg2/opt/bea/jdk142_05/lib/tools.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic_sp.jar:/rg2/opt/bea/weblogic81/server/lib/weblogic.jar:/rg2/opt/bea/weblogic81/server/lib/ant/ant.jar:/rg2/opt/bea/jdk142_05/jre/lib/rt.jar:::/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbserver44.jar:/rg2/opt/bea/weblogic81/common/eval/pointbase/lib/pbclient44.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient.jar:/rg2/opt/bea/weblogic81/server/lib/webserviceclient+ssl.jar:/rg2/opt/bea/weblogic81/server/lib/xbean.jar:/rg2/opt/bea/weblogic81/server/lib/wlxbean.jar:/rg2/opt/bea/weblogic81/server/lib/xqrl.jar:/rg2/opt/bea/weblogic81/server/lib/netui/netui-compiler.jar:/rg2/opt/bea/weblogic81/server/lib/wli.jar:/rg2/opt/bea/weblogic81/server/lib/fop.jar:/rg2/opt/bea/weblogic81/integration/adapters/sample/lib/sample-eis.jar:
PATH=/rg2/opt/bea/weblogic81/server/bin:/rg2/opt/bea/jdk142_05/jre/bin:/rg2/opt/bea/jdk142_05/bin:/opt/bea/weblogic700/server/lib/solaris:/opt/bea/jdk131_03/jre/bin:/opt/bea/jdk131_03/bin:/rg1/users/zhongw/weblogic/PMDomain:/rg2/opt/bea/weblogic81/workshop:/rg1/users/zhongw/bin:/bin:/usr/bin:/usr/sbin:/usr/java/bin:/usr/openwin/bin:/opt/local/bin:/usr/ccs/bin:/usr/per15/bin:/usr/local/SUNWspro/bin:/usr/local/accurev/bin:/opt/jakarta-ant/bin:/usr/local/accurev/bin:/usr/ccs/bin:/usr/local/bin:/opt/enJin/2.3.1/bin:/usr/java/bin:/usr/openwin/bin:/usr/dt/bin:/rg1/users/zhongw/Borland/JBuilder2005/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
/rg2/opt/bea/jdk142_05/bin/java -client -Xms256m -Xmx256m -XX:CompileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -native -Xverify:none -da -Dplatform.home=/rg2/opt/bea/weblogic81 -Dwls.home=/rg2/opt/bea/weblogic81/server -Dwli.home=/rg2/opt/bea/weblogic81/integration -Dlog4j.configuration=file:/rg2/opt/bea/weblogic81/common/lib/workshopLogCfg.xml -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ignoreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=/rg2/opt/bea/weblogic81/server/lib/weblogic.policy weblogic.Server
Error: native VM not supported
Stopping Pointbase server...
Pointbase server stopped.

I believe this is the error you get when you try to start up a JVM with the commandline option '-native'.
Remove this flag from your startup script and retry.
By the way, it may be that you have the environment variable 'JAVA_OPTIONS' set to '-native' in which case:
(first confirm this is the case)
$ echo $JAVA_OPTIONS
-native
(Then edit the startup script if you get the result above)
add in a line:
# To remove '-native' flag
unset JAVA_OPTIONS
and retry.
I have to confess I don't know what the '-native' flag is actually supposed to do, but my JVM also reports back that this is unsupported.

Error when starting weblogic server 10.3.6

hi am having below error when starting my weblogic server am in window xp
C:\mydomain\base_domain\bin>DIR
Volume in drive C is WinXP
Volume Serial Number is F086-F167
Directory of C:\mydomain\base_domain\bin
22/04/2011 11:10 PM <DIR> .
22/04/2011 11:10 PM <DIR> ..
22/04/2011 11:10 PM <DIR> nodemanager
22/04/2011 11:10 PM <DIR> server_migration
22/04/2011 11:10 PM <DIR> service_migration
29/11/2011 10:14 PM 14,273 setDomainEnv.cmd
29/11/2011 10:14 PM 16,221 setDomainEnv.sh
29/11/2011 10:14 PM 3,322 startManagedWebLogic.cmd
29/11/2011 10:14 PM 3,147 startManagedWebLogic.sh
29/11/2011 10:14 PM 5,914 startWebLogic.cmd
29/11/2011 10:14 PM 5,657 startWebLogic.sh
29/11/2011 10:14 PM 2,528 stopManagedWebLogic.cmd
29/11/2011 10:14 PM 2,391 stopManagedWebLogic.sh
29/11/2011 10:14 PM 2,103 stopWebLogic.cmd
29/11/2011 10:14 PM 2,081 stopWebLogic.sh
 10 File(s) 57,637 bytes
 5 Dir(s) 6,815,825,920 bytes free
C:\mydomain\base_domain\bin>START startWebLogic.cmd
C:\mydomain\base_domain\bin>
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C
:\PROGRA~1\Java\JDK16~1.0_2\lib\tools.jar;C:\wlserver\server\lib\weblogic_sp.jar
;C:\wlserver\server\lib\weblogic.jar;C:\modules\features\weblogic.server.modules
_10.3.4.0.jar;C:\wlserver\server\lib\webservices.jar;C:\modules\org.apache.ant_1
.7.1/lib/ant-all.jar;C:\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.
jar;C:\oracle\Middleware\wlserver_10.3\sip\server\lib\weblogic_sip.jar;C:\Oracle
\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\wlserver\common\derby\li
b\derbyclient.jar;C:\wlserver\server\lib\xqrl.jar
PATH=;C:\wlserver\server\native\win\32;C:\wlserver\server\bin;C:\modules\org.apa
che.ant_1.7.1\bin;C:\PROGRA~1\Java\JDK16~1.0_2\jre\bin;C:\PROGRA~1\Java\JDK16~1.
0_2\bin;C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bi
n;C:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PH
P;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Commo
n Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLSha
red;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Co
mmon Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Co
mmon Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Share
d\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C
:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program File
s\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\
jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\
DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\
forms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21;C:\wlserver\server\nati
ve\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer
-Djava.security.policy=C:\wlserver\server\lib\weblogic.policy -Xverify:none -ea
:com.bea.wcp... -da -Dplatform.home=C:\wlserver -Dwls.home=C:\wlserver\server
-Dweblogic.home=C:\wlserver\server -Dcommon.components.home=C:\Oracle\MIDDLE~1\
ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.common
s.logging.impl.Jdk14Logger -Ddomain.home=C:\mydomain\BASE_D~1 -Djrockit.optfile=
C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Dorac
le.server.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1\servers\AdminServer -D
oracle.domain.config.dir=C:\mydomain\BASE_D~1\config\FMWCON~1 -Digf.arisidbeans
.carmlloc=C:\mydomain\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\
mydomain\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:
\mydomain\BASE_D~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\
mydomain\BASE_D~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\-
-Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.os
soiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djav
a.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=f
alse -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole
= -Dwlw.logErrorsToConsole= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
 at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
 at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
my set is
C:\mydomain\base_domain\bin>SET
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\Desmond\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=MADIMAD-B533821
ComSpec=C:\WINDOWS\system32\cmd.exe
FORMS90_PATH=C:\forms
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\Desmond
LOGONSERVER=\\MADIMAD-B533821
NUMBER_OF_PROCESSORS=2
ORACLE_HOME=C:\product\11.2.0\dbhome_1
OS=Windows_NT
Path=C:\Program Files\PC Connectivity Solution\;C:\product\11.2.0\dbhome_1\bin;C
:\product\11.2.0\dbhome_1;C:\forms;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C
:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common F
iles\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared
;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Commo
n Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Commo
n Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\D
LLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\m
ydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\J
ava\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk
1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\Dev
SuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\for
ms\sms_code.pll;C:\mywls\wlserver;C:\Java\jdk1.6.0_21
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PHPRC=C:\Program Files\PHP\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
TMP=C:\DOCUME~1\Desmond\LOCALS~1\Temp
USERDOMAIN=MADIMAD-B533821
USERNAME=Desmond
USERPROFILE=C:\Documents and Settings\Desmond
windir=C:\WINDOWS
aa__COMPAT_LAYER=EnableNXShowUI

Tshifhiwa,
Back again? Nothing learned?
No jdev version?
You should n^know by now that you have to give at least some basic information.
A description of what you tried to do outside the listing would help too.
Timo

Warning message when starting Weblogic BPM server in SOA Suite 11G

Hi There,
I understand that most of the warning message we can ignore it but why at first the warning is generated? Anyone can delighted me for this warnings, I don't want this to be show in production mode because of the production policy from most of the clients.
Below are some of the warning message that shows in my Weblogic with BPM.
<Warning> <Connector> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486532106> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566020> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.load(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566036> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.unload(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567018> <BEA-010001> <While deploying EJB 'FacadeFinderBean', class oracle.soa.management.internal.ejb.FacadeFinderBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567034> <BEA-010001> <While deploying EJB 'SOATestBean', class oracle.soa.management.internal.ejb.SOATestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceEx was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.SOADirectInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.Invoker was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567736> <BEA-010001> <While deploying EJB 'ContextAwareBean', class oracle.integration.platform.ejb.ContextAware was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569358> <BEA-015036> <In the EJB MessageDispatcherBean(Application: soa-infra, EJBComponent: sdpmessagingclient-ejb.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactory';>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569499> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarter was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTest was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtility was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <J2EE> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486592774> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application BPMComposer is not versioned.>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra>

Hi There,
I understand that most of the warning message we can ignore it but why at first the warning is generated? Anyone can delighted me for this warnings, I don't want this to be show in production mode because of the production policy from most of the clients.
Below are some of the warning message that shows in my Weblogic with BPM.
<Warning> <Connector> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486532106> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566020> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.load(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566036> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.unload(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567018> <BEA-010001> <While deploying EJB 'FacadeFinderBean', class oracle.soa.management.internal.ejb.FacadeFinderBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567034> <BEA-010001> <While deploying EJB 'SOATestBean', class oracle.soa.management.internal.ejb.SOATestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceEx was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.SOADirectInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.Invoker was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567736> <BEA-010001> <While deploying EJB 'ContextAwareBean', class oracle.integration.platform.ejb.ContextAware was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569358> <BEA-015036> <In the EJB MessageDispatcherBean(Application: soa-infra, EJBComponent: sdpmessagingclient-ejb.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactory';>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569499> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarter was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTest was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtility was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <J2EE> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486592774> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application BPMComposer is not versioned.>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra>

JMS resource not located when starting Weblogic 8.1 as windows service

Similar Messages

Maybe you are looking for