Exception message full view
Hello,
Is there a way to visualize more than 2 exception messages for an MRP element (doble click on MRP element from MD04) but all of the exception messages generated by MRP ?
Thanks for you answer,
Regards
Dear Mr.Oliver,
I'm not able to understand your requirement exactly.
But check whether you want to view the list of Exception Messages.
Click on the selection button or else Press F4 on the RHS of that field.
If you are able to view only 2 values there in that entries screen ,just click on
<b>Display All Values</b> next button from the Left hand side of the Print button.
I think you were asking for this.
Regards
Mangal
Similar Messages
-
SCSM 2012 UR3 - "The Full adapter threw an exception" error when viewing "Deleted Items" view
Has anyone expereinced the "The Full adapter threw an exception" eror in the SCSM 2012 console?
We get the error in both our dev and production environments when trying to view the "Deleted Items" view in the console (even after using powershell to remove all deleted iterms). As just noted, interestingly enough we can view, delete, and restore
deleted items using the corresponding Powershell commands. It should be noted that neither of our two SCSM 2012 environments has a registered data warehouse server. Below is a screen shot of the error as well as the associated error text and event
log errors.
Any help would be greatly apprecaited!
Regards,
JJ
Console Dialog Error Test
============================
Date: 10/17/2012 8:46:50 PM
Application: Service Manager Console
Application Version: 7.5.1561.0
Severity: Error
Message: An error occurred while loading the items.
Microsoft.EnterpriseManagement.UI.ViewFramework.AdvancedListSupportException: The Full adapter threw an exception. See the FullUpdate property to see the exception.
at Microsoft.EnterpriseManagement.UI.ViewFramework.AdvancedListSupportAdapter.DoAction(DataQueryBase query, IList`1 dataSources, IDictionary`2 parameters, IList`1 inputs, String outputCollectionName)
at Microsoft.EnterpriseManagement.UI.DataModel.QueryQueue.StartExecuteQuery(Object sender, ConsoleJobEventArgs e)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Associated Event Log Errors
============================
Log Name: Application
Source: MSSQLSERVER
Date: 10/17/2012 8:46:49 PM
Event ID: 8623
Task Category: Server
Level: Error
Keywords: Classic
User: SYSTEM
Computer: jhqsrv08.jhq.net
Description:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you
believe you have received this message in error, contact Customer Support Services for more information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSSQLSERVER" />
<EventID Qualifiers="49152">8623</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-10-18T00:46:49.000000000Z" />
<EventRecordID>339617</EventRecordID>
<Channel>Application</Channel>
<Computer>jhqsrv08.jhq.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Binary>AF21000010000000090000004A00480051005300520056003000380000000F00000053006500720076006900630065004D0061006E0061006700650072000000</Binary>
</EventData>
</Event>
Log Name: Operations Manager
Source: DataAccessLayer
Date: 10/17/2012 8:46:49 PM
Event ID: 33333
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: jhqsrv08.jhq.net
Description:
Data Access Layer rejected retry on SqlError:
Request: MTV_Select_62f0be9f-ecea-e73c-f00d-3dd78a7422fc_Top -- (NonGenericDistinctFilterForAbstract=4cf77750-6688-8672-9470-036e0f4b48d6,26b2dff7-2ce9-59cf-4eb8-a6fb2d095d45,89992420-1297-0b8b-f3ca-1e53aa36f9e0,ed5ec2bf-6745-086...), (ObjectStatus_4AE3E5FE_BC03_1336_0A45_80BF58DEE57B0=47101e64-237f-12c8-e3f5-ec5a665412fb)
Class: 16
Number: 8623
Message: The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify
the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="DataAccessLayer" />
<EventID Qualifiers="32768">33333</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-10-18T00:46:49.000000000Z" />
<EventRecordID>935685</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>jhqsrv08.jhq.net</Computer>
<Security />
</System>
<EventData>
<Data>MTV_Select_62f0be9f-ecea-e73c-f00d-3dd78a7422fc_Top -- (NonGenericDistinctFilterForAbstract=4cf77750-6688-8672-9470-036e0f4b48d6,26b2dff7-2ce9-59cf-4eb8-a6fb2d095d45,89992420-1297-0b8b-f3ca-1e53aa36f9e0,ed5ec2bf-6745-086...),
(ObjectStatus_4AE3E5FE_BC03_1336_0A45_80BF58DEE57B0=47101e64-237f-12c8-e3f5-ec5a665412fb)</Data>
<Data>16</Data>
<Data>8623</Data>
<Data>The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions.
Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: OpsMgr SDK Service
Date: 10/17/2012 8:29:26 PM
Event ID: 26319
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: jhqsrv08.jhq.net
Description:
An exception was thrown while processing GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions for session ID uuid:66ba50da-cdce-4d15-823c-92c41b46fe44;id=2425.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnknownDatabaseException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to The query processor ran out of internal resources and could
not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact
Customer Support Services for more information.).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="OpsMgr SDK Service" />
<EventID Qualifiers="49152">26319</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-10-18T00:29:26.000000000Z" />
<EventRecordID>935679</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>jhqsrv08.jhq.net</Computer>
<Security />
</System>
<EventData>
<Data>GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions</Data>
<Data>uuid:66ba50da-cdce-4d15-823c-92c41b46fe44;id=2425</Data>
<Data>The creator of this fault did not specify a Reason.</Data>
<Data>System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UnknownDatabaseException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to The query processor ran out of internal resources
and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error,
contact Customer Support Services for more information.).</Data>
</EventData>
</Event>I have the same problem and get following error:
An exception was thrown while processing GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions
I have contacted MS Support, but hey could not help
either.
I really
need to fix it. Any help? -
hi, on the link below, I need to open the "demande de visa de resident temporaire" but once I click on it it gives me the following message: " To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html For further support, go to www.adobe.com/support/products/acrreader.html".
the link is: http://www.cic.gc.ca/francais/information/demandes/visa.asp?countrySelect=RO#applications
can someone please help me? I've tried installing everything as per the indication in the message but I still get that error message.update your adobe reader here, http://get.adobe.com/reader/
untick unwanted tag-along ware. -
View & Action Cross Plant MRP Exception Messages
We have a centralised storage facility and we have chosen to control all of the conversion of Planned Orders to Requsitions and then on to Stock Transfer Orders from the Supplying Plant. However we do not currently have the ability to view and action MRP Exception Messages from the Ordering Plants.
We use MD06 to action the Supplying Site MRP Exceptions but this can only look at one Plant at a time.
Does anyone know a way of viewing and actioning MRP Messages across multiple Plants?Hi,
pls try below selection method in TCode MD06
then you will get exception message list of materails only within plant (don't enter MRP controller, enter only plant)
MD06 --> Plant --> Tab Restrict Selection --> Exception Groups --> select all group ( check box tick 1 to 8 ) --> then Excute
it will solve your problem
Regards,
Sankaran -
Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted) -
I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
Other Errors and Warnings
1 error(s), 1 warning(s)
Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
Thanks,
Altaf B.Hi AltafB,
For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
setup rolls the SCOM install back.
Has anyone seen this issue before or know how to help resolve it?
Appreciate your help, below is the SCOM installation log:
Thanks
Marc
[13:27:27]: Always: :Creating Database: OperationsManagerDW
[13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
[14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :Exception running sql string
DECLARE @sql NVARCHAR(MAX);
SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion
of the operation or the server is not responding.
[14:55:33]: Always: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
[14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Always: :InnerException.StackTrace:
[14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or
the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
[14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
marc nalderHi,
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Why am i not able to see the exception message?
i wrote an 'instead of insert' trigger on a view.
and there are some exception situations in which the insertion should be stopped. my trigger works correctly. i mean it implements its purpose. however, the message i am taking after the trigger execution is not satisfying. ( i am using iSQL*Plus as the editor.)
here is my trigger: (after trigger there is some extra explanation below.)
CREATE OR REPLACE TRIGGER DemandOfCourses_T1_II
INSTEAD OF INSERT ON DemandOfCourses
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
cpc NUMBER;
currentNum NUMBER;
stud1 NUMBER;
stud2 NUMBER;
prec NUMBER;
exc1 EXCEPTION;
exc2 EXCEPTION;
BEGIN
SELECT capacity
INTO cpc
FROM LimitedCourse
WHERE course = :NEW.course;
IF cpc IS NULL THEN
cpc := 1000;
END IF;
SELECT COUNT(course)
INTO currentNum
FROM Registered
WHERE course = :NEW.course;
SELECT COUNT(student)
INTO stud1
FROM Registered
WHERE student = :NEW.student
AND course = :NEW.course;
SELECT COUNT(student)
INTO stud2
FROM WaitingFor
WHERE student = :NEW.student
AND course = :NEW.course;
SELECT COUNT(hp.preCourse)
INTO prec
FROM HasPrereq hp
WHERE hp.course = :NEW.course
AND hp.preCourse NOT IN (SELECT course FROM CourseResult WHERE student = :NEW.student);
IF (prec = 0) THEN
IF (stud1 = 0) AND (stud2 = 0) THEN
IF (currentNum = cpc) THEN
INSERT INTO WaitingFor
VALUES (:NEW.student, :NEW.course, SYSDATE);
ELSE
INSERT INTO Registered
VALUES (:NEW.student, :NEW.course);
END IF;
ELSE
RAISE exc1;
END IF;
ELSE
RAISE exc2;
END IF;
EXCEPTION
WHEN exc1 THEN
RAISE_APPLICATION_ERROR (-20002, 'Already registered for this course.');
WHEN exc2 THEN
RAISE_APPLICATION_ERROR (-20003, 'First the prerequesite course(s) must be taken.');
WHEN NO_DATA_FOUND THEN
NULL;
END;
for eample, if i want to insert the row below:
INSERT INTO DemandOfCourses VALUES (100005, 'BAK127', 'REGISTERED');
-- 100005 : STUDENT ID
-- BAK127 : COURSE CODE
-- REGISTERED : SITUATION
when i run this insert comment, i receive this result:
1 row created.
Actually, it should not insert anything. and it is not inserting anything. i mean, it is working correctly. however, i want it to write my exception message: "-20003, 'First the prerequesite course(s) must be taken.'"
why cannot i see my expected exception message?
all the data and structure is certainly true. if you have a question about them, i can answer.
by the way, i will catch this exception from my java code. what should i do in this situation?
any help will be appreciated.
regardsHi,
i don't understand your logic.
See, I added output to trace the counters value :
SQL> drop table courses cascade constraints;
Table dropped.
SQL> CREATE TABLE Courses (
2 code VARCHAR2(15),
3 name VARCHAR2(40) NOT NULL,
4 credit NUMBER(2) CHECK (credit BETWEEN 1 AND 20),
5 PRIMARY KEY (code)
6 );
Table created.
SQL>
SQL> drop table LimitedCourse;
Table dropped.
SQL> CREATE TABLE LimitedCourse (
2 course VARCHAR2(15),
3 capacity NUMBER(3) NOT NULL,
4 PRIMARY KEY (course),
5 FOREIGN KEY (course) REFERENCES Courses(code)
6 );
Table created.
SQL>
SQL> drop table Registered;
Table dropped.
SQL> CREATE TABLE Registered (
2 student NUMBER(6),
3 course VARCHAR2(15),
4 PRIMARY KEY (student, course),
5 --FOREIGN KEY (student) REFERENCES Students(studentID),
6 FOREIGN KEY (course) REFERENCES Courses(code)
7 );
Table created.
SQL>
SQL> drop table WaitingFor;
Table dropped.
SQL> CREATE TABLE WaitingFor (
2 student NUMBER(6),
3 course VARCHAR2(15),
4 regisDate TIMESTAMP NOT NULL,
5 PRIMARY KEY (student, course),
6 --FOREIGN KEY (student) REFERENCES Students(studentID),
7 FOREIGN KEY (course) REFERENCES Courses(code)
8 );
Table created.
SQL>
SQL> drop table HasPrereq ;
Table dropped.
SQL> CREATE TABLE HasPrereq (
2 course VARCHAR2(15),
3 preCourse VARCHAR2(15),
4 PRIMARY KEY (course, preCourse),
5 FOREIGN KEY (course) REFERENCES Courses(code),
6 FOREIGN KEY (preCourse) REFERENCES Courses(code)
7 );
Table created.
SQL>
SQL>
SQL> drop table CourseResult;
Table dropped.
SQL> CREATE TABLE CourseResult (
2 student NUMBER(6),
3 course VARCHAR2(15));
Table created.
SQL>
SQL> CREATE OR REPLACE VIEW DemandOfCourses (student, course, situation) AS
2 (SELECT student, course, 'REGISTERED' FROM Registered)
3 UNION
4 (SELECT student, course, 'WAITING' FROM WaitingFor);
View created.
SQL>
SQL> INSERT INTO Courses VALUES ('EDA242', 'MATHEMATICS 1', 5);
1 row created.
SQL>
SQL> INSERT INTO LimitedCourse VALUES ('EDA242', 15);
1 row created.
SQL>
SQL>
SQL> CREATE OR REPLACE TRIGGER DemandOfCourses_T1_II
2 INSTEAD OF INSERT ON DemandOfCourses
3 REFERENCING NEW AS NEW OLD AS OLD
4 FOR EACH ROW
5 DECLARE
6 cpc NUMBER;
7 currentNum NUMBER;
8 stud1 NUMBER;
9 stud2 NUMBER;
10 prec NUMBER;
11 exc1 EXCEPTION;
12 exc2 EXCEPTION;
13
14 BEGIN
15
16 SELECT capacity
17 INTO cpc
18 FROM LimitedCourse
19 WHERE course = :NEW.course;
20 dbms_output.put_line('cpc '||cpc);
21
22 IF cpc IS NULL THEN
23 cpc := 1000;
24 END IF;
25
26
27 SELECT COUNT(*)
28 INTO currentNum
29 FROM Registered
30 WHERE course = :NEW.course;
31 dbms_output.put_line('currentNum '||currentNum);
32
33 SELECT COUNT(*)
34 INTO stud1
35 FROM Registered
36 WHERE student = :NEW.student
37 AND course = :NEW.course;
38 dbms_output.put_line('stud1 '||stud1);
39
40 SELECT COUNT(*)
41 INTO stud2
42 FROM WaitingFor
43 WHERE student = :NEW.student
44 AND course = :NEW.course;
45 dbms_output.put_line('stud2 '||stud2);
46
47
48 SELECT COUNT(*)
49 INTO prec
50 FROM HasPrereq hp
51 WHERE hp.course = :NEW.course
52 AND hp.preCourse NOT IN (SELECT course FROM CourseResult WHERE student = :NEW.student);
53 dbms_output.put_line('prec '||prec);
54
55
56 IF (prec = 0) THEN
57 IF (stud1 = 0) AND (stud2 = 0) THEN
58 IF (currentNum = cpc) THEN
59 dbms_output.put_line('IF_1');
60 INSERT INTO WaitingFor
61 VALUES (:NEW.student, :NEW.course, SYSTIMESTAMP);
62 ELSE
63 dbms_output.put_line('ELSE_1');
64 INSERT INTO Registered
65 VALUES (:NEW.student, :NEW.course);
66 END IF;
67 ELSE
68 dbms_output.put_line('ELSE_2');
69 RAISE exc1;
70 END IF;
71 ELSE
72 dbms_output.put_line('ELSE_3');
73 RAISE exc2;
74 END IF;
75
76 EXCEPTION
77 WHEN exc1 THEN RAISE_APPLICATION_ERROR (-20002, 'Already registered for this course.');
78 WHEN exc2 THEN RAISE_APPLICATION_ERROR (-20003, 'First the prerequesite course(s) must be taken
79 WHEN NO_DATA_FOUND THEN dbms_output.put_line('NO_DATA_FOUND');
80 END;
81 /
Trigger created.
SQL>
SQL> INSERT INTO DemandOfCourses VALUES (100005, 'EDA242', 'REGISTERED');
cpc 15
currentNum 0 --here all count are 0, also you insert...
stud1 0
stud2 0
prec 0
ELSE_1
1 row created.
SQL> INSERT INTO DemandOfCourses VALUES (100005, 'EDA242', 'REGISTERED');
INSERT INTO DemandOfCourses VALUES (100005, 'EDA242', 'REGISTERED')
ERROR at line 1:
ORA-20002: Already registered for this course. --For the second time, you have your excetion...
ORA-06512: at "SCOTT.DEMANDOFCOURSES_T1_II", line 73
ORA-04088: error during execution of trigger 'SCOTT.DEMANDOFCOURSES_T1_II'
SQL> Nicolas. -
MS SQL server is going down frequently(10 days of gap) with exception message: "A severe error occurred
on the current command. The results, if any, should be discarded". We are facing this issue for past two month.But funny thing is server will be up automatically with out any service restart manually. Also if we try to restart the SQL
server service manually then SQL server will be in a dead lock situation and it will not come up even if we wait for long time. Then we should do a windows server machine restart to
make the SQL sever up. As a suggestion from Microsoft to fix this kind of similar issue,
we have installed service pack 3 for SQL Server. But even after we are facing same issue.
Server Details:
Server OS: Windows Server 2008 R2
Two type of database servers are installed on server:
1. MS SQL Server 2008 R2
2. My SQL
Also Reporting server is configured for the purpose of generating SSRS report from a dot net website.
NOTE:Immediately after the data retrieval/save, we are closing the connection explicitly by the
application.
we have checked the windows event log and below are the details:
Log Name: Application
Source: ASP.NET 4.0.30319.0
Application information:
Application domain: /LM/W3SVC/5/ROOT-1-130718142067856406
Trust level: Full
Application Virtual Path: /
Application Path: E:\WebSpaceFolder\ACSQuiK\Production\
Machine name: DBSERVER
Process information:
Process ID: 148
Process name: w3wp.exe
Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
Exception type: SqlException
Exception message: A severe error occurred on the current command. The results, if any, should be discarded.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
Log Name: Application
Source: Report Server Windows Service (MSSQLSERVER)
Description:
Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Report Server Windows Service (MSSQLSERVER)" />
<EventID Qualifiers="0">107</EventID>
Could anybody can suggest any kind of fix for this issue? Thanks in advance.Hi YesYemPee,
I have tried but still not clear about your issue, I would like you provide more details information about your issue based on below points to better analysis about the issue:
What action did you do and caused the error "A severe error occurred on the current command. The results, if any, should be discarded", did you run report on the web application or something else then the error happen?
If you rendering the report and got the error, please try to provide us more error information in the log files which path like:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles
If it is not the case in step1, Please try to provide SQL Server Error log(SQL Server Logs) and more details information.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Transaction code to display exception messages by material and plant
Hi,
Is there a transaction code or standard report in SAP to display exception messages by material and plant? I see the exception messages by individual material and plant in MD04 but I need to see a collective view. I tried Collective access in MD04 and MD46 but they are not giving me exception groups but I need exceptions listed out by material and plant.
Thanks.Visu,
I have never seen such a report.
MD06 does support fine tuning the output display, once the list has been generated. If you use this feature, the resulting display is the entire list as created by selecting the initial parameters (such as exception group), but with the specific items that contain your selected message highlighted. If you are addressing the messages interactively, you can select the review (glasses) screens, and scroll through just the ones which contain your selected exception message(s).
To try this, execute MD06. Select the groups as necessary. Execute. Wait for the list. Now, immediately, select 'search' (binoculars). Experiment with the output.
As mentioned in the previous post, if MD06 does not meet your needs, you will need to have a custom report written.
Rgds,
DB49 -
Dates and Exception message in MD04
Hi all ,
When i view in MD04 t-code for one purchase order the system shown the below exception message
Exception 30 = Plan process according to schedule (08/01/10/07/25/10)
06 = Start date in the past
I cant understand the dates inside the braket . We are following the factory calender all days working days (No holidays)
When i calculate the no of days between 07/12/2010 and 08/11/2010 it is more than 28 days (the date format is ( MMDDYYYY)
Can anybody explains why it is happened?
Delivery date D 08/11/2010
Req. date 07/12/2010
Release date 07/12/2010
Plnd dely time 28
GR proc. time 7Hi,
Refer to Mr. Rajesha's reply in the below thread, it should clarify your doubt, else revert
exception Message 30 "Plan process according to schedule"
Regards,
Vivek -
I have Acrobat 7.0 Professional and in full view some pages get smaller.
Adobe Acrobat 7.0 Professional in full view some pages get smaller. Can anyone tell me why this happens?
Further to this original post --- OK, I uninstalled and then reinstalled the program, to no avail. I did however get a message which I had gotten before but since I was not yet aware that the program got installed with any problems, I had not noticed... This time I took notice. The error message was clearly what it is about, at least to a great extent. I got this message: Warning 20225: Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port Printer may be unavailable. GetLastError: The operation completed successfully. So then after the reinstallation, I went into Control Panel, Printers & Drivers and made a valiant attempt to manually install a virtual printer port. I have Adobe Acrobat 7.0 Professional installed in another computer on which I have Windows XP Pro (yes the only other computer-- I am permitted two installations for this program-- I confirmed this with Adobe), by looking at Properties and copying down exactly the text, etc. which described the names of the two possible ports, etc. Tried to "tell" my new computer (the one which has Windows 7) that it should set up and/or look for such a virtual port, again to no avail. I am amazed that Adobe does not allow me to even pay cash money for tech support, but they wouldn't do it. I guess you can have just so many employees who know the programs, etc. Anyway, as I said before I may just break down and buy the 9.0 version which the Adobe techie told me is indeed compatable with Windows 7. He did not tell me that Windows 7 was incompatible with Adobe Acrobat 7.0 Professional but that 8.0 is indeed incompatible. Just googled the term "Warning 20225" along with some relevant buzz words. I can see there is still a bit of tweaking I may be able to do before I cry "uncle!"
-
MRP exception message 64 and planning strategy group 52
Hi Gurus,
I have done extensive search online in the forum to find the route cause why we are getting MRP exception message 64 for a specific material in one of our plants. This exception message does not occur for the same materials which is also produced in another plant.
I was just wondering whether the planning strategy group of 52 in MRP 3 view would have any effect on the frequent occurrence of exception message 64. I know that the 64 message occurs when the routing time is higher than the in house production time. If that's the case where to look for in routing to correct this, apart from this do we need to look at work centers and other details. I'm not a PP person but still was curious to know see if i could take a shot at it.
Also the MRP settings that we follow in the plant where this problem does not occur is NETCH, Create PR - 2, Schedule lines - 3, create MRP list - 1, Planning mode - 3, scheduling -2
in the plant where the 64 message occurs quite often is Netch, Create PR -2, Schedule lines - 3, create MRP list - 1, planning mode - 1, Schdeduliing - 1
I was thinking do MRP settings and planning strategy group would have any impact on why we are getting the 64 wexception message
Because of this 63 exception message, the downstream components are getting wrong signals.
Thanks
RaviHello Ravi
Generallt, exception message "64 - Production finish after order finish" is triggered when the order start date is in the past and system automatically changes to forward scheduling to calculate the finish date.
Note 1913017 explains how the order basic date is calculated and adjusted in case of forward scheduling, however, you are using strategy 52 and this is a very special scenario, whever VP planned orders are generated.
The VP planned orders will always be adjusted to the requirements date even if the requirements date is in the past. This is a special feature in the planning segment, since these orders are only kind of 'virtual' planned orders. These orders only have to provide the demand requirements for the components in time.
Therefore, there is a relationship between strategy 52 (VP planned order) and the exception message observed.
BR
Caetano -
Hi Experts,
I have read SAP Library & sdn forum thread also,but even I did not understand when does system creates exception message 10 & 15.
can anybody please explain with giving suitable example.
PLEASE DO NOT SUGGEST ANY SAP HELP LINK OR FORUM TREAD.Hi,
An example
Mtl - A (Stock - 10) MD04 view
Eg for Exception message - 10
Stock - 10
Need - 1 reqd. dt. 7th dec, reqd qty 15, bal = -5
Supply proposal - 1, dlv qty - 10, dlvy dt - 15th dec, bal = 5 (MRP puts exception message as 10 with reschedule dt as 7th dec)
(existing stock not enough to meet need & hence reschedule in for the supply proposal)
Eg for Exception message - 15
Stock - 10
Need - 1, reqd. dt. 7th dec, reqd qty - 5, bal = 5
Supply proposal - 1, dlv qty - 10, dlvy dt - 10th dec, bal = 15 (MRP puts exception message as 15 with reschedule dt as 20th dec)
Need - 2 dt 20th Dec, Reqt qty - 10, bal = 0
(existing stock enough to meet need & hence reschedule out for the supply proposal to meet future need)
Hope it clarifies.
Regards,
Vivek -
Exception message 62 - Master Data Inconsistant
I'm getting the referenced exception message when generating an MRP run with scheduling value of "lead time scheduling and capacity planning". I've done consistency checks on all master records - routings, work centers, etc - and all have come back clean. Anyone have any idea why this may be happening?
Thanks!
BobHi,
62 Scheduling: Master data inconsistent Check master data !
Remove "In House Processing Time" from the Material Master MRP2
view. Ensure that the Production Version & Routing are correct. Run
MPS/MRP manually once corrected.
Regards
Sunil
Maybe you are looking for
-
Crystal Enterprise 8.5 - Processor Restrictions?
Post Author: qstone CA Forum: Upgrading and Licensing Hi, I currently have CR8.5 Developer installed on a single processor server that has had a good run, but needs replacing. We have a new dual processor server that I'm trying to move our applicatio
-
Any Web service in LiveCycle 7.0?
I found web service available in LiveCycle ES.. Can anybody tell me whether web service is available in LiveCycle 7.0? I'm working on a VB.net program and trying to call web service to change document restrictions.
-
We are buying a Mac. 1- Will the Apple Store transfer the files from the PC to the Mac? 2- Will the Apple Store install Microsoft knowing we have to purchase it first.
-
I have created a captivate file with a menu page leading to 5 scenarios. The first time I take scenario everything works perfectly. I return to the menu page to take the next scenario, but now the next scenario does not work. The forward button gets
-
What is the best way to keep the block diagram/ front panel clean?
Hello, I am relatively new to Labview so I'm not able to tell if I'm overcomplicating my programs or making my block diagram too cluttered. I was wondering if there were some ways to tell whether I could simplify my programming just by looking at it