Exception running FOD for WebCenter
Hi,
I managed to start Fusion Order Demo (FOD) for WebCenter on JDev 11.1.1.5 on embedded WLS.
But when I change to "My Pages" then the portal page is displayed and following error occures:
====================
Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.1.3.v20110304-r9073):
org.eclipse.persistence.exceptions.ValidationException Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS]. Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter/CustomPortalDS' didn't find subcontext 'jdbc'. Resolved ''; remaining name 'jdbc/webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
Fehler
Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS]. Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter/CustomPortalDS' didn't find subcontext 'jdbc'. Resolved ''; remaining name 'jdbc/webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
Fehler
Fehler
While trying to lookup 'jdbc.webcenter/CustomPortalDS' didn't find subcontext 'jdbc'. Resolved ''
======================
Any hints what may be wrong??
regards
Peter
Just found the info.
Have you read and execute this: http://www.oracle.com/technetwork/middleware/webcenter/fod-for-webcenter-install-guide-r11-129304.pdf
This explains how to setup the application properly.
edit: i can't seem to find info about the latest webcenter version and the fod demo. Are you using webcenter 11g ps3 (or later)? Because the info provided in the pdf is from 2010 which means that it used webcenter ps1 or ps2 which is completly different from the current version...
If you want an example, you should use the latest example app: http://download.oracle.com/docs/cd/E21764_01/webcenter.1111/e10273/toc.htm
Edited by: Yannick Ongena on Sep 7, 2011 11:08 AM
Similar Messages
-
Hi. I am running Windows 8.1 on a 64 bit Toshiba Satellite P70-A laptop with 16Gb of RAM. I have installed Adobe Creative Suite 6 - Master Collection. All is fine except for Adobe Acrobat X. It runs OK for a while, but then suddenly it won't work. I uninstall it, re-boot and re-install again, bit the same process repeats itself and once again I have to uninstall and re-install again. I don't know if windows update interferes with it? Has anyone else had a similar problem? Is it fixable?
I think you'd be much better off asking in the Acrobar forum, Acrobat
-
Error while running ETL for Financials_Oracle R1213.
Hi All,
I have done all installation and configuration for OBIA 7.9.6.4. I am getting following error while running ETL for Financials_Oracle R1213.
===========================================================================================================
1)While starting DAC server, I am getting following error:
SEVERE: Incorrectly specified Post-Etl Script/Executable
================================================================================================================
2) After starting ETL Financials_Oracle R1213,
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1) pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable 2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.2013-11-27 11:26:28.855 Acquiring Resources 2013-11-27 11:26:28.857 Acquired Resources 2013-11-27 11:26:28.858 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has started. ANOMALY INFO::: Error while executing : INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL)MESSAGE:::Irrecoverable Errorpmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTableStatus Desc : FailedWorkFlowMessage : Error Message : Unknown reason for error code 36331ErrorCode : 36331EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
java.lang.Thread.run(Thread.java:619)
(Number of retries : 1)
pmcmd startworkflow -sv BIA_IS -d Domain_oracle2go2.us.oracle.com -u Administrator -p **** -f SILOS -paramfile /home/oracle/Informatica/9.0.1/server/infa_shared/SILOS.SIL_InsertRowInRunTable.ORA_R1213_Flatfile.txt SIL_InsertRowInRunTable
2013-11-27 11:26:59.923 INFORMATICA TASK:SILOS:SIL_InsertRowInRunTable:1:(Source : FULL Target : FULL) has finished execution with Failed status.
====================================================================================================================
Could anyone please help me to resolve this error?
Regards,
NarottamDid you configured Informatica???
-
I am trying to deploy an RDL file (5MB) to SQL Azure Reporting server in South Central US using the deploy function in SQL Server Data Tools but facing the following error during deployment to Azure Reporting server.
"There was an exception running the extensions specified in the config file. ---> Maximum request length exceeded."
Is there any limit on the size of RDL files which can be deployed to Azure Reporting server? I have seen some online posts which talk about increasing the maxRequestLength in httpruntime of web.config in Reporting server. But in case of Azure Reporting server
how can be make modification to this configuration?
I have tried to upload it directly to SQL Azure Reporting server from the Management Portal --> Upload Report function which still resulted in error.
Thanks & Regards, DeepThanks for your question. Unfortunately we are in the process of deprecating SQL Reporting services. Full details are available at http://msdn.microsoft.com/en-us/library/gg430130.aspx
Thanks Guy -
PDF Exception: Invalid object for the XFA entry in the forms dictionary
Hi,
We have an online adobe interactive form, via webdynpro, which saves OK, but occassionaly when a form is loaded again the form appears blank and the below error is returned by the ADS. I've searched but cannot find any definitive answer to this issue:
Processing exception during a "GetData" operation.#Request start time:Tue Jan 11 14:08:47 GMT 2011#com.adobe.ProcessingException: Error exporting Data into PDF - PDF Exception: Invalid object for the XFA entry in the forms dictionary.#[Ljava.lang.StackTraceElement;@51bb49da##Exception Stack Trace:#com.adobe.ProcessingException: Error exporting Data into PDF - PDF Exception: Invalid object for the XFA entry in the forms dictionary.#[Ljava.lang.StackTraceElement;@51bb49da###at com.adobe.ads.remote.EJB_PDFAgent.exportFormData(Unknown Source)###at com.adobe.ads.operation.GetData.execute(Unknown Source)###at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)###atcom.adobe.ads.request.Request.processOperations(Unknown Source)###at com.adobe.ads.request.Request.process(Unknown Source)###at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)###at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)###at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)###at sun.reflect.GeneratedMethodAccessor1814.invoke(Unknown Source)###at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)###at java.lang.reflect.Method.invoke(Method.java:324)###at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)###at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)###at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)###at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)###atSoapServlet.doPost(SoapServlet.java:51)##at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)###at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)###at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)###at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)###at com.sap.engine.services.http
server.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)###atcom.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnali er.java:364)###at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)###atcom.sap.engine.services.httpserver.server.Reques
Analizer.handle(RequestAnalizer.java:265)###at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)###at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)###at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)###at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)###at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)###at java.security.AccessController.doPrivileged(Native Method)###at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)###at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)##Caused by: com.adobe.internal.pdftoolkit.core.exceptions.PDFInvalidDocumentException: Invalid object for the XFA entry in the forms dictionary.###at com.adobe.internal.pdftoolkit.services.xfa.impl.PDFFormSupport.exportXFAData(Unknown Source)###at com.adobe.internal.pdftoolkit.services.xfa.XFAService.exportDataset(Unknown Source)###... 32 more##
Please help!
Edited by: Kevin Alcock on Jan 11, 2011 2:20 PMHi Otto,
We have had the form working and in most instances the form can be updated multiple times without issue. However, occassionally a form is created OK but the next time it is launched it is blank (the data is visible when the PDF is downloaded to the desktop)
Do you think this issue could be to do with the form layout/XML...I changed the form template 2 days ago as I suspected this issue could be realted to incorrect field bindings but we have had the error on a form created after the change was made.
Many Thanks,
Kevin
Edited by: Kevin Alcock on Jan 13, 2011 1:10 PM -
[JTA_Start_0]Exception getting connection for Oracle DB
Hi All,
I am facing a problem when I am going to insert data in a table (Oracle DB) using JTA Command Action block. I have deployed the Oracle JDBC driver and Configured the data source in http://<server<:port>>/nwa->Configuration Management -> Infrastructure. But when I am trying to insert data using the JTA Command Action block for inserting data in a table it is throwing error.I am running with XMII 12.1 SP5 and Oracle 11g.
Here is the error details.
[ERROR] [JTA_Start_0]Exception getting connection for jdbc/ODS_ORACLE_SBX was ResourceException occurred in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 0 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine) or they are allocated from a non transactional ConnectionFactory. In case of transactional ConnectionFactory used from Application Thread there is an automatic mechanism which detects unclosed connections, 2)The pool size of adapter "ODS_ORACLE_SBX" is not enough according to the current load of the system . In case 1) the solution is to check for cached connections using the Connector Service list_conns command or in case 2), to increase the size of the pool.
Note: ODS_ORACLE_SBX is the Data source name which I have configured.
If I increase the min pool size from 0 to 5 or more than 0 then Data source is getting red means not Available.
Can anybody provide any help.
Thanks in advance
Chandan
Edited by: Chandan Jash on May 3, 2011 4:25 AMYou set up your Oracle DB connection by following the path 'xMII Menu -> Data Services -> Data Servers -> New'.
Re: Configure Oracle in MII 12.0
Regards,
Chanti. -
Exception condition "Logsys for GUID changed"
Hi all, I am working in SRM 4.0 with a cliente "DSR", in the past I had a backend system with name "SWD" and now I want to create a connection between "DSR" and "SWR" (SWR is a copy from backend system SWD).
I do all configuration of users, RFC connections, etc...
But when I run reports for product categories reply, I have this error: Exception condition "Logsys for GUID changed" in Inbound queue in SRM.
I have to run transaction BDLS in backend? in this case SWR or in SRM system??
Please this is urgent....
Thanks in advance
Rosayr sys names are somewhat confusing
so I use simple naming convention
You have set up srmDEV and eccDEV
it's working fine and now you want to set up QA
i.e. srmQA and eccQA
you can not copy completely srmDEV to srmQA like ecc.
because when you download cust objects (eg prod cat) and bus objects (eg matls)
a GUID is created in SRM and one more guid is passed to backend.
Now if you copy srmDEV to srmQA completely with master data (SAP_ALL basis profile for copy)
then this sychronisation of GUIDs is lost and SRM starts giving erroe message which you are getting.
So for SRM copy SAP advises to copy with sap_cust profile
establish new backend connection
and down load cust objects and bus objects again.
We had faced this issue and worked the mentioned way.
BR
Dinesh -
Good exception handling policy for Java web application
I'm looking for a good exception handling policy for Java web application. First I found this Java exception handling best practices - How To Do In Java which says that you should never catch the Trowable class nor use e.printStackTrace();
Then I found this Oracle page The Message-Driven Bean Class - The Java EE 6 Tutorial, which does just that. So now I'm confused. Is there a good page online for an exception handling policy for Java EE Web applications? I have a hard time finding one. I've read that you should not catch the Exception class. I've been catching it previously to make sure that some unknown exception doesn't slip through early in the loop and stops all other customers from executing later on in the loop. We have a loop which runs once a minute implemented using the Quartz framework. Is it OK if you just change the implementation to catch the RuntimeException class instead of the Exception class? We're using Java 7 and the Jetty Servlet Container.I'm looking for a good exception handling policy for Java web application.
If you have not done so I suggest you start by reviewing the several trails in The Java Tutorials.
Those trails cover both HOW to use exceptions and WHEN to use them.
This trail discusses the 'controversy' you mention regarding 'Unchecked Exceptions'
http://docs.oracle.com/javase/tutorial/essential/exceptions/runtime.html
Unchecked Exceptions — The Controversy
Because the Java programming language does not require methods to catch or to specify unchecked exceptions (RuntimeException, Error, and their subclasses), programmers may be tempted to write code that throws only unchecked exceptions or to make all their exception subclasses inherit from RuntimeException. Both of these shortcuts allow programmers to write code without bothering with compiler errors and without bothering to specify or to catch any exceptions. Although this may seem convenient to the programmer, it sidesteps the intent of the catch or specify requirement and can cause problems for others using your classes.
Why did the designers decide to force a method to specify all uncaught checked exceptions that can be thrown within its scope? Any Exception that can be thrown by a method is part of the method's public programming interface. Those who call a method must know about the exceptions that a method can throw so that they can decide what to do about them. These exceptions are as much a part of that method's programming interface as its parameters and return value.
The next question might be: "If it's so good to document a method's API, including the exceptions it can throw, why not specify runtime exceptions too?" Runtime exceptions represent problems that are the result of a programming problem, and as such, the API client code cannot reasonably be expected to recover from them or to handle them in any way. Such problems include arithmetic exceptions, such as dividing by zero; pointer exceptions, such as trying to access an object through a null reference; and indexing exceptions, such as attempting to access an array element through an index that is too large or too small.
Generally don't catch an exception unless you plan to HANDLE the exception. Logging, by itself is NOT handliing.
First I found this Java exception handling best practices - How To Do In Java which says that you should never catch the Trowable class nor use e.printStackTrace();
That article, like many, has some good advice and some poor or even bad advice. You get what you pay for!
I've read that you should not catch the Exception class.
Ok - but all that does is indicate that a problem of some sort happened somewhere. Not very useful info. Java goes to a lot of trouble to provide specific exceptions for specific problems.
I've been catching it previously to make sure that some unknown exception doesn't slip through early in the loop and stops all other customers from executing later on in the loop.
If the exception is 'unknown' then maybe it NEEDS to 'stop all other customers from executing later on in the loop'.
That is EXACTLY why you don't want to do that. You need to identify which exceptions should NOT stop processing and which ones should.
Some 'unknown' exceptions can NOT be recovered and indicate a serious problem, perhaps with the JVM itself. You can NOT just blindly keep executing and ignore them without risking data corruption and/or the integrity of the entire system Java is running on.
Is it OK if you just change the implementation to catch the RuntimeException class instead of the Exception class? We're using Java 7 and the Jetty Servlet Container.
No - not if you want a well-behaved system.
Don't catch exceptions unless you HANDLE/resolve them. There are times when it makes sense to log the exception (which does NOT handle it) and then raise it again so that it gets handled properly later. Yes - I know that is contrary to the advice given in that article but, IMHO, that article is wrong about that point.
If you have ever had to maintain/fix/support someone else's Java code you should already understand how difficult it can be to find WHERE a problem occurs and WHAT the exact problem is when exceptions are not handled properly. -
Platform Info:
ADF BC Version 10.1.3.36.73
Java Version 1.5.0_05
Oracle IDE Version 10.1.3.36.73
I am using Jdeveloper 10.1.3 and i use the 'Check for Updates' feature to download and install the SRDemoSampleADFBC application.
However, when i run the application it threw the exception below, after successfully logging in and then attemping to click on a menu tab. Why is this happening ? Can any one say ?
oracle.jbo.ConfigException: JBO-33005: Configuration SRServiceLocal not found
at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:519)
at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:463)
at oracle.jbo.client.Configuration.getConfiguration(Configuration.java:436)
at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:287)
at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:539)
at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
at oracle.adf.model.bc4j.DataControlFactoryImpl.findOrCreateSessionCookie(DataControlFactoryImpl.java:138)
at oracle.adf.model.bc4j.DataControlFactoryImpl.createSession(DataControlFactoryImpl.java:239)
at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:76)
at oracle.adf.model.BindingContext.get(BindingContext.java:465)
at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:280)
at oracle.adf.model.binding.DCUtil.findSpelObject(DCUtil.java:248)
at oracle.adf.model.binding.DCUtil.findContextObject(DCUtil.java:383)
at oracle.adf.model.binding.DCIteratorBinding.<init>(DCIteratorBinding.java:127)
at oracle.jbo.uicli.binding.JUIteratorBinding.<init>(JUIteratorBinding.java:60)
at oracle.jbo.uicli.binding.JUIteratorDef.createIterBinding(JUIteratorDef.java:87)
at oracle.jbo.uicli.binding.JUIteratorDef.createIterBinding(JUIteratorDef.java:51)
at oracle.adf.model.binding.DCIteratorBindingDef.createExecutableBinding(DCIteratorBindingDef.java:277)
at oracle.adf.model.binding.DCBindingContainerDef.createExecutables(DCBindingContainerDef.java:296)
at oracle.adf.model.binding.DCBindingContainerDef.createBindingContainer(DCBindingContainerDef.java:425)
at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:54)
at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:43)
at oracle.adf.model.BindingContext.get(BindingContext.java:491)
at oracle.adf.model.BindingContext.findBindingContainer(BindingContext.java:327)
at oracle.adf.model.BindingContext.findBindingContainerByPath(BindingContext.java:641)
at oracle.adf.controller.v2.context.LifecycleContext.getBindingContainer(LifecycleContext.java:155)
at oracle.adf.controller.v2.context.LifecycleContext.initControllerClass(LifecycleContext.java:288)
at oracle.adf.controller.v2.context.LifecycleContext.<init>(LifecycleContext.java:56)
at oracle.adf.controller.v2.context.PageLifecycleContext.<init>(PageLifecycleContext.java:50)
at oracle.adf.controller.faces.context.FacesPageLifecycleContext.<init>(FacesPageLifecycleContext.java:35)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at oracle.adf.controller.v2.context.LifecycleContext.getInstance(LifecycleContext.java:89)
at oracle.adf.controller.v2.context.LifecycleContext.getInstance(LifecycleContext.java:69)
at oracle.adf.controller.faces.lifecycle.ADFPhaseListener$1.before(ADFPhaseListener.java:408)
at oracle.adf.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:84)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:192)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336)
at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196)
at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:627)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)Please see this thread.
Exception Running the SRDemoSampleADFBC application -
What is recommended Jrockit GC policy for Webcenter sites
Currently we are using jrockit-jdk1.6.0_45-R28.2.7-4.1.0 for fatwire webcenter sites and its currently uses Genparpar GC, we would like to know What is recommended Jrockit GC policy for Webcenter sites.
Thanks
SumanthHello Sumanth,
We do not have any specific garbage collector recommendations for JDKs earlier than 1.7 except that G1GC is not recommended for JDK1.6.
See also Doc ID 1956788.1 and Doc ID 1495193.1.
Kind regards,
Stephan. -
Adobe Creative Cloud - has anybody had any luck running Adobe CC on a new mac mini? Does it run slow for Photoshop?
Adobe CC applications are very large and the base Mac mini isn't a good choice because it has only 4GB of RAM and has a slow standard hard drive. To get the most out of ACC you should upgrade the mini to at least 8GB. I'd also choose an SSD or Fusion drive for better performance.
-
I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
6% InterCheck
5% iCalExternalSync
3% WindowServer
2% CalendarAgent
2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outsUninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437 -
I had hacker problems so I reloaded Snow Leopard. Afterwards, Mac had to delete 798 items. Now it is looping on 4 items to delete for the past 2 weeks. I can't reboot, reload, or restart. I have to let the battery run down for it to turn off. I think a big part of the problem is that someon one the internet (the hacker) was mirroring my hard drive. It seems to have locked up my system. I could be wrong about this guess, though. All I do know is that it is now looping on the last 4 iems, and I can't do anything.
Well, I can get it to turn on, but all it does is continously try to delete the last 4 items. When I try to reload Snow Leopard, it tells me my hard drive is full and that I need to delete items.
Can anyone help? I am so lost without my Mac. I am back on the PC, and though it works, I'm sure many of you will understand when I say it's just not a Mac.
Thanks.I installed Snow Leopard using my Apple external Superdrive. I followed directions I found on the Apple site. Here is the article info: Mac OS X v10.6 Snow Leopard: How to Erase and Install
Article HT3910
located at: http://support.apple.com/kb/HT3910
Everything was going smoothly until I got to the reinstall part. I had to choose to reinstall on a hard drive or network drive. I've never used a network drive; just the hard drive. It seems that's where the troubles began. I selected the hard drive. It seemed to go well, and then I got the message that I needed to delete some files because I was out of space. I chose to get rid of my music files, but, there were only 636. I don't know what the rest of the files were. I was using the Secure Empty Trash command.
That was my first time doing an erase and install. I tried to do it again, but I now get a continuous error telling me that my hard drive is full and I must delete files. Only I can't delete files because 4 files are still being deleted and my computer won't let me stop the process.
I found out about the hackers mostly by the fact that whenever I used to watch something like Hulu or Netflix, I never had problems with internet connection or speed. Lately, I had internet connection problems. I went in to check my settings for my internet provider and found out the settings had been changed to public and all these extra computers were connected to my network. -
Retropay by element run Errors for one employee
When i am running retropay for 3711 employees one of them errors out and the retropay by element process ends as Incomplete.
The following is the error for the assignment:
Error ORA-01427: single-row subquery returns more than one row has occurred in table pay_element_entries_f at location 4502
Cause: an oracle error has occurred. The failure was reported on table pay_element_entries_f at location
The log file for that it appears as follows:
Payroll: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RETROELE module: RetroPay By Element
Current system time is 15-APR-2010 16:26:51
===============================================================================
Oracle Human Resources Generic Process
Started at : 15-APR-2010 16:26:51
Chunk Size : 20
Threads : 1
Logging Category :
User Messaging : N
Interlock : N
Trace : N
RR Buffer Size : 500
RRV Buffer Size : 500
Bal Buffer Size : 500
EE Buffer Size : 500
Logging Area :
Assignment ID for Start:
Assignment ID for End o:
HR_6881_HRPROC_ORA_ERR
SQLERRMC ORA-01427: single-row subquery returns more than one row
SQL_NO 4502
TABLE_NAME pay_element_entries_f
APP-PAY-06881: Error ORA-01427: single-row subquery returns more than one row
has occurred in table pay_element_entries_f at location 4502
Cause: an oracle error has occurred. The failure was reported on table pay_element_entries_f at location 4502 with the error text ORA-01427: single-row subquery returns more than one row
Action: Please contact your support representative.
Ended processing at : 15-APR-2010 21:50:07
Total Assignment count : 3711
Total Action count : 3711
Successfully processed : 3710
Skipped : 0
Unprocessed : 0
Errored : 1
===============================================================================
PL/SQL Output
PL/SQL Output
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 595012
Number of copies : 1
Printer : noprint
APP-FND-00092: Routine PRINT_OUTPUT cannot find the file /data/oracle/PRD/inst/apps/PRD_hrmsprod/logs/appl/conc/out/o595012.out to print.
Check if the file exists. Check if the person who started the concurrent manager has read privileges on the directory and on the file. Contact your system administrator to assign read privileges.
Finished executing request completion options.
Concurrent request completed
Current system time is 15-APR-2010 21:50:08
Please can some one help me to troubleshoot so that i can rectify this error for 1 employee?
Edited by: 594647 on Apr 16, 2010 10:46 AMyou can delete the retro assignment action for the moment, so you can launch the run for all employees.
As such, you have some more time to debug the issue.
I would activate some payroll tracing, so you know which fast formula throws this error. And then you should dig further, so you can identify the sql retruning multiple rows.
Or you do a sql*trace. That one will also point you to the offensive sql. -
In my program I would like to run a For loop inside of a While loop, and have them run independently, at their own execution rates. As a test, I wrote a simple VI with a While loop with 1 second timing, and into this I inserted a For loop with 3 second timing. I created indicators for both iteration terminals. Upon running the VI, I found the While loop waits for the For loop to run N times before the While loop executes again. I also found that sometimes the first iteration of the For loop will end at 1 second rather than 3 seconds, and the STOP button to terminate execution of the While loop does not always work.
Solved!
Go to Solution.ksinks wrote:
Thanks, how would you synchronize the loops? I have gone through the Getting Started exercises and manual.
Why would synchronization matter? Did you want them to run independantly at their own speed or not?
Regardless, there's a synchronization pallette with functions for this, as Occurance.
Other solutions include a common loop counter and a case structure executing every X'th iteration, or having the faster loop send a queue or event every X'th loop that controls the slower loop.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV
Maybe you are looking for
-
Airport Utility v.6.2 not compatible with 1st gen Extreme?
Hello All, Ruh Roh!!! Recently upgraded my Macbook Pro from 10.6.8 to 10.8.2. Attempted to reconfigure 1st gen Airport Extreme and received the 'not compatible' notice. I'm connecting through it ok at the moment; workaround? Can I go back to a p
-
Can't open Itunes on Windows 7
When I click Itunes Icon, nothing happens. I've tried a few things. Restored the PC. Uninstalled Itunes and Quicktime. Reinstalled both, uupdated to the latest Itunes 11.01 and still nothing. I want to install I07 but have to back up my iphone 1
-
There is a song on my phone that is not listed on my regular library.
I have a song on my phone that, when I go to itunes on my computer, is not listed in my library. It is listed on the "on this device" section but I cannot delete the song from that tab.
-
200GB western Digital Drive stopped working
Hi all, I have a Western Digital External USB Hard Drive that connects to my PB using a USB 2.0 cable. I used to use this hard drive for quite some time. I had to stop using it for a while (3 months or so), and then when I try to use it again, nothin
-
Hi all and Raineer i have written a formula column in the below Data template and it is not giving any result for the id element when i view the xml output <dataTemplate name="data_template" description="Template_description" dataSourceRef="TFUAT">