Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
Can someone help me which update i can install after this, can i start with
Update Rollup 1 for Exchange Server 2010 SP1.
Many thanks in advance

My recommendation will be:
Remove update roll-up 5
Install SP1 check that everything is working
Install SP2 check that everything is working
Install SP3 check that everything is working
I think it will be risky for you to go straight to SP3.
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Similar Messages

Converting a VBScript for Exchange 2003 to Function the same for Exchange 2010

Converting a VBScript for Exchange 2003 to Function the same for Exchange 2010
Afternoon;
I've run into a problem at this time. We are currently looking into migrating from Exchange 2003 into Exchange 2010 and I'm finding that my normal data collection method is no longer usable in Exchange 2010. I have the script posted below as of
what I'm currently using to collect my information, I just need to know of a means to continue the collection when we move to the new Exchange server. Any assistance in getting this to function with Exchange 2010 would be great.
++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++
On Error Resume Next
'Date Stamp for File Name
Function TIMESTAMP
strDate = CDate(Date)
strDay = DatePart("d", strDate)
strMonth = DatePart("m", strDate)
strYear = DatePart("yyyy", strDate)
If strDay < 10 Then
    strDay = "0" & strDay
End If
If strMonth < 10 Then
    strMonth = "0" & strMonth
End If
TIMESTAMP = strYear & strMonth & strDay
End Function
'Drop Location Vars Set
DRP01 = 1
DRP02 = 1
'Live Check SQL04
strVIC = "SQL04"
Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\.\root\cimv2")
Set colItems = objWMIService.ExecQuery ("Select * from Win32_PingStatus Where Address = '" & strVIC & "'")
For Each objItem in colItems
    DRP01 = objItem.StatusCode
Next
'Live Check FS02
strVIC = "FS02"
Set objWMIService = GetObject("winmgmts:" & "{impersonationLevel=impersonate}!\\.\root\cimv2")
Set colItems = objWMIService.ExecQuery ("Select * from Win32_PingStatus Where Address = '" & strVIC & "'")
For Each objItem in colItems
    DRP02 = objItem.StatusCode
Next
'Setup STOREDIR Location
If DRP01 = 0 Then
    STOREDIR = "\\SQL04\Email\Collected\" 'Primary Data Storage Location
    Else
    If DRP02 = 0 Then
        STOREDIR = "\\FS02\Shared\MIS\Daniel\" 'Secondary Data Storage Location
        Else
        STOREDIR = "C:\Scripts\Logs\" 'Tertiary Data Storage Location
    End If
End If
'STOREDIR Check for Availability
Set fso = CreateObject("Scripting.FileSystemObject")
If fso.FolderExists(STOREDIR) Then
    AVAIL = 1
    Else
    AVAIL = 0
End If
'Sets Failsafe STOREDIR
If AVAIL = 0 Then
    STOREDIR = "C:\Scripts\" 'Last Chance DIR for Data Files
End If
'Sets Filename
FILENAME = TIMESTAMP & ".csv"
'Testing Purposes Only
'wscript.echo TIMESTAMP
'wscript.echo STOREDIR & vbNewLine & FILENAME & vbnewline & vbnewline & AVAIL
'Sets Process Variables
cComputerName = "EXCH02" ' Exchange Server Name or IP Address
DIM fso, ObjFile
Set fso = CreateObject("Scripting.FileSystemObject")
Set ObjFile = fso.CreateTextFile(STOREDIR & FILENAME, True)
'ObjFile.WriteLine("Date,Display Name,Size(KB)")
Const cWMINameSpace = "root/MicrosoftExchangeV2"
Const cWMIInstance = "Exchange_Mailbox"
Dim strWinMgmts
Dim objWMIExchange
Dim listExchange_Mailboxs
Dim objExchange_Mailbox
strWinMgmts = "winmgmts:{impersonationLevel=impersonate}!//" & cComputerName &"/" & cWMINameSpace
Set objWMIExchange = GetObject(strWinMgmts)
'Checks for Email Record and Records to File
If Err.Number <> 0 Then
ObjFile.WriteLine("ERROR:" & VBNEWLINE & Err.Number & VBNEWLINE & Err.Description)
Else
Set listExchange_Mailboxs = objWMIExchange.InstancesOf(cWMIInstance)
If (listExchange_Mailboxs.count > 0) Then
    For Each objExchange_Mailbox in listExchange_Mailboxs
       ObjFile.WriteLine(TIMESTAMP & "," & objExchange_Mailbox.MailboxDisplayName & "," & objExchange_Mailbox.Size)
    Next
Else
    ObjFile.WriteLine("WARNING: No Exchange_Mailbox instances were returned.")
End If
End If
ObjFile.Close
VBScript is what I prefer. All scripts must have a kill switch to manage them from a primary location. Mine, is an updater method.
VBScript is what I prefer. All scripts must have a kill switch to manage them from a primary location. Mine, is an updater method.

Okay, then what about an alternative for getting the same result. The file associated in the article is too much. All we need is something simple for a single exchange server with 180 users. We only need to pull UserName and DataSize(KB).
I only need to collect two pieces of information from the exchange server and the third piece is forced due to the date of when the information was collected. This way I can sort and filter by Date and Name to see a trend of the users mailbox usage
size.
Every day this runs, it determines the date of the file which is also the first piece, then pulls from the exchange server the entire list of users (the second piece), and then the respective user's mailbox size in KB (the third piece). This all is
dropped into a CSV file later used to import into a database before being archived, done by a second task on the server. Later used by a shared Excel PowerPivot document among the department.
Those of us in the server admin group use this to, at a glance, see the collective size of email usage on the server. Mainly used as a means of catching an incident before it happens. We are currently keeping our users around a collective 80GB
of use out of the well received limit of 110GB on Exchange 2003 and limiting the user's ability to send and receive email by email quota is apparently not accepted for us to do. So we use this to determine who we need to visit and force archive their
email so the server doesn't fail due to the size limit.
VBScript is what I prefer. All scripts must have a kill switch to manage them from a primary location. Mine, is an updater method.

October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

Hello all,
After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
The job was cancelled. The user either cancelled the job or modified the associated protection group.
Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
Thnks, Andrea

Hi Andrea,
Have you installed the update 2919355?
To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
According to the official website, the issue which you described is not listed as the known issue.
Please uninstall this update and continue to monitor the official website for the latest news.
Best Regards.
Steven Lee
TechNet Community Support

ITunes still says I have app updates after updating

I've been trying to find a solution to this for a while. iTunes will tell me I have a certain app for updating. I'll update it and after updating it still says that app needs to be updated. I've tried to delete the problematic app and re-download the app but it still shows it needs to be updated. The only solution I've found is to update the app on my iPhone and let it sync with iTunes to update it on my mac.
Does anyone have the same issue and have a better solution?

This solved my problem.... tnx Vadim Tumanov
Re: iTunes still says I have app updates after updating
Jan 19, 2012 10:54 PM (in response to suprimeau)
Hi guys,
I had the same problem that I'v solved doing two things:
- update all applications on the iPhone
- go to iTunes and press File -> Transfer purchases from iPhone
That's it
Enjoy

My iTunes still wanting to update after updating..!!

My iTunes still wanting to update after updating … I try to do the updates individually I also try the option to (download all) the updates But the iTunes still asking me to updates the same publications.
Anybody out there experiencing such a problem like this one..?

Hello bballkyle34,
Luckily we have steps outlined for resolving just such an error.
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers,
Allen

My iPad 2 is stuck in verify update after updating to 8.1.3. Tried pushing buttons and holding. No luck

My iPad 2 is stuck in verify update after updating to 8.1.3. Tried pushing buttons and holding. No luck

How many times did you try the reset? Sometimes, it can take more than one reset, especially with these kinds of issues. Try multiple times. Note that you need to hold both buttons until the Apple logo appears on the screen. This can sometimes take 15-30 seconds.
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

SQL Server 2012 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack 2 - why only for x86 ?

Hey guys...
Im a little bit confused... i wanted to download the newest hotfixes for SQL server 2012...
But the download for :
2983175 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack
is only for the platform: x86 available ... but my SQL server 2012 is running in a x64 environment...
(when i checked the older cumulative updates... they're all only for x86.. can someone tell me why ? )
thanks and regards,
Dominic

There doesn't exist an SQL Express "Standard". It's two different editions.
For Express there are three 32bit/64bit editions:
Express, Express with Tools and Express with Advanced Services.
Express with Tools is essentially Express with Management Studio Tools, Express with Advanced Services adds also BI (Business Intelligence) + Reporting Services.
As for where you can apply the cumulative update, on the link you can see this:
Microsoft SQL Server 2012 Service Pack 2, when used with:
Microsoft SQL Server 2012 Analysis Services
Microsoft SQL Server 2012 Developer
Microsoft SQL Server 2012 Enterprise
Microsoft SQL Server 2012 Express
Microsoft SQL Server 2012 Business Intelligence
Microsoft SQL Server 2012 Standard
Microsoft SQL Server 2012 Web
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

After installed SP1 for SQL Server 2012, can no longer export to csv

After installing SP1 today via Windows Update, I am no longer able to export data to csv using the SQL Server Import and Export wizard. I get the following error message:
"Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
"Column "col1": Source data type "200" was not found in the data type mapping file."...
(The above line repeats for each column)
The work-around I have to do is to manually map each column in the "Edit Mappings..." option from the "Configure Flat File Destination" page of the wizard. This is an extreme inconvenience to have to have to edit the mappings and change
each column to "string [DT_STR]" type from "byte stream [DT_BYTES]" type each time I want to export to csv. I did not have to do this before installing SP1; it worked perfectly for months with hundreds of exports prior to this update and
no need to modify mapping.

I am running Windows 7 64-bit, SQL Server 2012 Express edition. Again, just yesterday from Windows Update, I installed SQL Server 2012 Service Pack 1 (KB2674319), followed by Update Rollup for SQL Server 2012 Service Pack 1 (KB2793634). This situation was
not occurring before these updates were installed, and I noticed it immediately after they were installed (and of course I restarted my computer after the updates).
In SSMS I just now created a test DB and table to provide a step-by-step with screenshots.
Here is the code I ran to create the test DB and table:
CREATE DATABASE testDB;
GO
USE testDB;
GO
CREATE TABLE testTable
id int,
lname varchar(50),
fname varchar(50),
address varchar(50),
city varchar(50),
state char(2),
dob date
GO
INSERT INTO testTable VALUES
(1,'Smith','Bob','123 Main St.','Los Angeles','CA','20080212'),
(2,'Doe','John','555 Rainbow Ln.','Chicago','IL','19580530'),
(3,'Jones','Jane','999 Somewhere Pl.','Washington','DC','19651201'),
(4,'Jackson','George','111 Hello Cir.','Dallas','TX','20010718');
GO
SELECT * FROM testTable;
Results look good:
id   lname   fname   address   city   state   dob
1   Smith   Bob   123 Main St.   Los Angeles   CA   2008-02-12
2   Doe   John   555 Rainbow Ln.   Chicago   IL   1958-05-30
3   Jones   Jane   999 Somewhere Pl.   Washington   DC   1965-12-01
4   Jackson   George   111 Hello Cir.   Dallas   TX   2001-07-18
In Object Explorer, I right-click on the [testDB] database, choose "Tasks", then "Export Data..." and the SQL Server Import and Export Wizard appears. I click Next to leave all settings as-is on the "Choose a Data Source" page, then on the "Choose a Destination"
page, under the "Destination" drop-down I choose "Flat File Destination" then browse to the desktop and name the file "table_export.csv" then click Next. On the "Specify Table Copy or Query" page I choose "Write a query to specify the data to transfer" then
click Next. I type the following SQL statement:
SELECT * FROM testTable;
When clicking the "Parse" button I get the message "This SQL statement is valid."
On to the next page, "Configure Flat File Destination" I try leaving the defaults then click Next. This is where I am getting the error message (see screenshot below):
Then going to the "Edit Mappings..." option on the "Configure Flat File Destination" page, I see that all columns which were defined as varchar in the table are showing as type "byte stream [DT_BYTES]", size "0", the state column which is defined as char(2)
shows correctly however with type "string [DT_STR]", size "2" (see screenshow below):
So what I have to do is change the type for the lname, fname, address and city columns to "string [DT_STR]", then I am able to proceed with the export successfully. Again, this just started happening after installing these updates. As you can imagine, this
is very frustrating, as I do a lot of exports from many tables, with a lot more columns than this test table.
Thanks for your help.

Any good training videos for project server 2010

Hi All,
I am working on SharePoint for several years and we had installed project server & created PWA site. But project server looks lot different from SharePoint. is there any good training video's for project server 2010?
Thanks for any help
Rithu

Rithu,
This would be a good place to start: http://technet.microsoft.com/en-us/library/ff628958(v=office.14).aspx
There are also several videos on Youtube as well. I am not sure if there is a 'structured' course available for Project Server 2010
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

Need download Link for LYNC SERVER 2010

I Couldn't find the download link for Lync Server 2010.
It redirects to Lync Server 2013 download page.
Could anyone please reply me with Lync Server 2010 download link?
Regards,
Arun

The Lync Server 2010 Trial VHD is located at:
VHD test drive: Lync Server 2010
(Eval) - Part 1 of 2
VHD test drive: Lync Server 2010
(Eval) - Part 2 of 2
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator (BETA) - Used to assist in the validation and documentation of Lync Server 2013.

Latest Update Rollup for Exchange 2010 SP3

Hi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMS

Hi
Currently we are using RU2 for Exchange 2010 SP3. We are facing an issue with OWA through IE 11 (no support for premium). To correct this issue it's recommended to install RU3. Here we are asking the expert opinion about installing RU7
on all Exchange 2010 servers and whether it makes any different issues or is it enough to install RU3
Thanks in advance
LMS
Personally, if you are going to update the servers, you should apply the latest RU regardless. So I would go with RU7.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Exchange password gone after update

After updating to 4.3.2, the exchange password configured on the ipad was removed and set to empty.
We've noticed this on 4 devices already.
Our others have most likely not updated yet and I'm fearfull that when they do update, they will face this issue.
Has this happened to anyone else?

Hello,
Yes, I experienced this when I upgraded my iPad and iPhone both to 4.3.2. When they restarted and I started Mail, I was prompted for my Exchange password. We use a single sign on via Active Directory so when users were prompted it wasn't much of an issue as they use their network password to log into mail again. Once they did this it remember the password as normal.
Regards,
Clinton Fitch
http://alliosnews.com

Microsoft Updates after Windows 7 Deployment using MDT 2010 Update 1

Hello,
After I deploy Windows 7 using MDT 2010 Update 1, i'm prompted to download and install updates. Updates which were installed prior to the capture process. During the capture process, does something reset Windows Update and makes it think the updates were
not installed?
My process of building a custom image is as follows:
1. PXE boot and kick-off a build task sequence (install OS + drivers + soe applications). (protectmypc = 3 in unattend.xml)
2. Download and install all Microsoft Updates, configure the OS, configure third-party applications.
3. Map a network drive to my deployment share, run litetouch.vbs and kick-off a capture task sequence.
4. PXE boot and kick-off a deployment task sequence. (copy profile = true, protectmypc = 1 in unattend.xml)

I'm getting updates but they are new updates. We have updates turned off through Group Policy and after an image is deployed it is attempting to install updates which should not be installed through Windows. I also have the protectmypc setting set to 3
and have updates turned off before capture. Something is searching for updates and during the deployment process and I need to find out how to stop this from happening. Someone has to know where these updates are coming from.
Joseph N. Sunderman | IT Professional

Exchange OWA does not load OWA for Exchange 2010 users

I have recently installed Exchange 2013 SP1 CU4 in my existing Exchange 2010 SP3 environment but when I use Exchange 2013 OWA to login Exchange 2010 users (it should automatically take the user to Exchange 2010 OWA) but I get this error message "Forbidden
403- Access is denied". However exchange 2010 users can login to their /ecp directory from exchange 2013. Exchange 2010 users can use OWA using their exchange2010/owa URL without any problems. We do not have any http or https redirection enabled
on any of the server. Also I have tried to uncheck the "Required SSL" settings for default web site on both Exchange servers but error is still same. Any help will be highly appreciated.

Hi,
According to your description, your Exchange 2013 cannot proxy OWA request to Exchange 2010 server, but ECP　request　can work properly.
In this case, Ｉ'd like to confirm OWA and ECP settings on Exchange 2013 and 2010 servers before going further:
Get-OWAvituraldirectory |fl identify,*url,*authentication
Get-ECPvituraldirectory |fl identify,*url,*authentication
Thanks,
Angela Shi
TechNet Community Support

Tring to install Security Update for Lync Server 2010 (KB2982388) ...patch failed to install

Hi
Idenitfied the lync security update issue below on server....
Worker process exited prematurely. The process will be automatically restarted.
Process: 'C:\Program Files\Microsoft Lync Server 2010\Server\Core\RtcHost.exe' Exit Code: E0434F4D!_HRX! (No Message Text Found!_HRM!).
The KB2982385 has tried to installed and failed 7 times....and as such my lync edge server is down.
Found solution:
http://www.microsoft.com/en-us/download/details.aspx?id=44080&fa43d42b-25b5-4a42-fe9b-1634f450f5ee=True
Downloaded patch and then ran lyncserverupdateinstaller...however it doesnt recognise that there is a patch to be deployed or a component to update.
Further running the msp by itself results in:
The upgrade patch cannot be installed by the windows insteller service because thje program to be upgraded may be missing or the upgrade patch may be a different version...
Please advise how i can get this issue resolved.

Hi,
Did you try to download and install the update manually?
Here is a similar case below, it seems something wrong when updating through Windows Update automatically.
http://social.technet.microsoft.com/Forums/en-US/dea0e9e2-8375-4599-b4cc-7a0cd45cd9de/kb-2982385-has-broken-my-edge-servers?forum=ocsedge
You can refer to the step of “Step 1: Install the cumulative updates”, choose “Method 3 Manual install” in the link below:
http://support.microsoft.com/kb/2493736
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

Similar Messages

Maybe you are looking for