Exchange enforced auto lock time is 30 min at my co. but iphone limit is 15

Is there any way to extend this lockout time. It is a real drag to have to enter the password on the tiny onscreen keyboard every 15 minutes. Also it would be great if we could have the option of using the numeric dialer style pad to unlock the phone. It would be soooo much easier to unlock the phone with one hand. Please fix this Apple, it is a major drag on enterprise users.

*"Is there any way to extend this lockout time. "*
No.
*"it would be great if we could have the option of using the numeric dialer style pad to unlock the phone. It would be soooo much easier to unlock the phone with one hand."*
http://www.apple.com/feedback
*"Please fix this Apple, it is a major drag on enterprise users."*
These are user to user forums. Nobody from Apple in a position to take your comments are on these forums.

Similar Messages

  • Auto-Lock time vs. Passcode time

    I'm too embarassed to admit what I thought the difference was, but just in case anyone who is starting out with an iPhone is confused, here's a tip that may help.
    Auto-Lock time is the time delay before the iPhone goes to sleep when not in use.
    "Require Passcode" means you can wake instantly from that sleep until the Passcode kicks in, ranging from immediately, to never if you don't want to have to enter a code.
    Mine is set to sleep after one minute of non-use. But you can wake it in the first 15 minutes of sleep without entering a code.
    I know this seems obvious, but the terminology is not and the manual does not so much as mention setting the Passcode interval, just Auto-Lock. So hope this helps somebody sort it out and doesn't get me too thoroughly flamed (grin).
    -dan

    Thanks for providing this info to help out other users which is what these discussions are all about.

  • I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

    I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

    This sorted it for me:
    Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
    To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

  • IPhone auto-set time is 1 min slow to time-server time.

    I have the problem that my iPhone is 1 min slow... always (when auto-set by network). I live in the Portland Oregon area, and I do not believe the issue is with AT&Ts towers putting out the wrong time. As my co-workers with the 3G iPhone display the correct time. Why is this?

    chrisrcarlson wrote:
    I do not believe the issue is with AT&Ts towers putting out the wrong time. As my co-workers with the 3G iPhone display the correct time.
    Still quite likely on AT&T's end. The time data is transmitted separately on the EDGE vs. the 3G networks. An iPhone 3G user in a recent thread described seeing different time/date on EDGE vs. 3G (toggling the 3G access on and off).
    http://discussions.apple.com/thread.jspa?threadID=1984418

  • Time Capsule Wifi n 5 ghz settings but iphone is not n

    Folks,
    I really need a help..
    i want to use wifi n in my time capsule so it wont get interference with g b or a wifi network.
    but when i select only n then i cannot use iphone on wifi...
    i have spare router and wondring if i connect that to time capsule i can use via spare router to connect iphone and my mbp with wifi n with time capsule with wifi n
    i dont know if that is possible but anybody have any great ideas would be much great..

    i just connect my spare router to TC and my MPB and TIME.C are setup as a only with wifi n
    after using the following insturctions from applieinsder test
    http://www.appleinsider.com/print/08/03/31/exploringtime_capsule_wifi_802_11n_and_the_5ghzband.html
    and my spare router connected to TC via ethernet and providing wifi to my iphone
    working perfectly.. now on my airport utility when i look at the log the speed its says rate 300 only with n before 149 with b g and n ... so i setup back to only n with 5 ghz
    .. sorry you said still will interference will come how?
    Message was edited by: mc_monkiez
    Message was edited by: mc_monkiez

  • Is Auto-Lock and the backlight timer the same thing?

    I think it's so silly every time you want to look at your Touch that has gone dark you have to unlock it. It's mine after all, and it's sitting by my side waiting to do something. I found an auto-lock setting and changed it to never. But I find in the balance that the backlight now stays on always. Can this be?
    Can we save battery power by adjusting the length we want the backlight to stay on and at the same time not have to slide-unlock the touch every time we go to use it?

    Hey Eddie,
    No, the two features are separate to each other, it's just Apple has overlooked putting a 'backlight timer' option into the settings panel as of yet.
    I think this will be a high priority in the next update to add features/settings/bug fixes. It has to be. This is the reason most people arn't seeing anywhere near the stated battery times.
    If you set the 'Autolock' feature to 'Never' it shouldn't require to be 'unlocked' when woken up from 'sleep'.
    Hope this helps.

  • Ipad wont auto lock occasionally n then lights will b still on even on standby..any1 facing the same problem?

    When i am done using my ipad2 ,the lights will still be on after the 2 mins auto lock time i set.this drains out the batt quickly n it does nit auto lock ocassionally...
    HELP..

    I got this problem too.
    The screen is totally black. You can see it " black-dim " when you turn it Off & On.
    You can ear the email tones when I receive an email.
    So it's definitvly working ... just show's a balck screen.
    So here's what I did (don't get your hope's up .. I'm still stuck).
    1- I tried to put it on recovery mode. It does ... but I can't see the usuall iTunes and connector image, I still get a  black screen.
    2- Rebooted it from recovery, still black
    3- Did a full Restore, still black
    Now it's totally empty and still the same black screen.
    Any ideas ?

  • 5 minute Auto-Lock not engaging on certain webpages

    Hi Apple Support Forums,
    I have been testing iPads in our organisation for a few weeks now, and one of our iPad users discovered a fairly major bug in iOS 4.2
    If:
    (Mobile)Safari is left open with either: adelaidenow.com.au or theaustralian.com.au (and possibly other News Corporation newspaper sites, but not news.com.au)
    Auto-Lock is set to 5 minutes (as per our organisations MobileConfig passcode settings)
    iPhones and iPads will not lock. The screen will not even dim, even after the auto-lock time has expended.
    This was discovered when one of our users left adelaidenow.com.au running on an iPad on a table and left it to answer a phonecall. The device had not locked after their phone call.
    Procedure to reproduce:
    I opened Safari on the iPad and accessed adelaidenow.com.au. I let the page load (while providing input, moving finger) and then stopped interacting with the ipad. (left idle).
    I set up a stopwatch and verified that after 7 minutes it had not locked.
    The device had been idle for 7 minutes without input and had not already locked.
    To verify that it was not Safari (the app, not the web page) that was not preventing lock, I loaded au.yahoo.com (while providing input) and then left it idle.
    After 5 minutes the screen locked. (as expected)
    I then loaded www.theaustralian.com.au and left it idle.
    I step a stopwatch going and after 6 minutes it had not locked.
    I tested this against http://au.yahoo.com and http://abc.net.au/news and the iPad/iPhone will lock as expected.
    I believe that cause for this is that newsCorp is using a custom refresh script in javascript, rather than a standard META REFRESH tag. Somehow this javascript is fooling iOS into thinking that the device is not idle.
    This is a fairly major security hole, as the device is violating a locked-down MobileConfig.
    Could others test this and find any other sites that prevent iOS from auto-locking?

    Do you see the images in Tools > Page Info > Media ?
    Try to disable IPv6 in Firefox, see http://kb.mozillazine.org/Error_loading_websites#IPv6
    See also http://kb.mozillazine.org/Error_loading_websites (Error_loading_some_websites)
    You can also try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window - See http://kb.mozillazine.org/Resetting_preferences
    See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

  • New iPad (3) dimming, not Auto-Lock

    Guys, having a problem with the new iPad (3) 
    I listen to pandora everynight.  ipad is charging and it normally auto locks and turns the screen off while pandora is in the background.
    Now, I notice, it dims the screen but does not auto lock ? Ive turned off the ipad, and also did a hard reset but same.
    I also turned on the ipad and left it in the main screen with all the apps to see what happens with pandora not active and the same, it goes dim but
    does not auto lock.
    any possible fix ??
    i just notice, if I unplug the ipad (3) the auto locks works after 2 mins but when charging the auto lock does not work and stays dim.

    Got this from Pandora...
    Hi Richard,
    Thanks for writing. When the iPad is plugged into it's power source, the Auto-lock is disabled. Sorry for the inconvenience.  
    Best,
    Dan
    Listener Support
    PANDORA® internet radio
    Need help? http://help.pandora.com

  • Auto-lock doesn't work after updating iOS 6.

    I'm using iphone 4s. After updating iOS 6, the auto-lock function doesn't work anymore. I left it for 10 minutes and when i came back, the screen was still on although the auto-lock time is 2 minutes. I tested many times, tried to reboot but it didnt help. But the screen auto-lock is still working. Does anyone have problem like me and know how to fix it ?

    Are you using Assistive Touch?
    See this thread:
                                                                               Re: IOs 6: Auto Lock Bug iPhone 4S (Updated)                    

  • HT4623 iOS 6 auto-lock problem

    Since I have updated my iPhone 4 to iOS 6, the auto-lock button doesnt work anymore.
    In addition, after pushing the button, my iPhone starts to oscillate between the "power off" and "unlock" pages.
    The same behavior happens also during the execution of different applications after a few seconds.
    Under thes conditions, my iPhone is now unusable.
    No clear for me how to step back to iOS 5 until this bug is fixed by Apple.

    I use assitive touch as well but not because I need assistance. Some things I just find quicker to do by using it.
    Since updating my iPhone 4 (not S) to iOS 6 yesterday (OTA), I'm also experiencing Auto-Lock not working 100% of the time. I've always had the auto-lock time set to it's 2 minute default and under 5.1.1, it has *always* auto-locked. Then today, I put the phone down for about 30 minutes after a brief use. I came back to the phone to find the screen still on with the battery level dropped as well cause of it. I had NO additional apps running...
    I am experimenting now and it *seems* that if auto-lock is set to 1 minute, it will auto-lock correctly. It may be that the 2 minute setting is what's causing the issue. As I said, I'm still testing this, again with no additional apps running in my testing...stay tuned.

  • Always auto locks by itself

    My iPad 2 always auto locks by itself even though the auto lock time is not up yet. Went to the service centre and was told that it was the software issue & the most common problem iPad faces. A restore of the iPad via iTunes will cure this issue.  I did a restore but the proble started again.....! Help.....

    If it is not an Exhange account issue and you have restored to no avail, try a reset. Hold down on the sleep and home buttons at the same time until the Apple logo appears - takes about 10-15 seconds. Ignore the red slider.

  • Disabling Passcode Auto-Lock

    I have a new iPod Touch and ever since I enabled it to get my e-mail and calendar information from Outlook it requires me to use a Passcode and to set an auto lock time. This is frustrating but especially so when I am in the car listening to music and I want to skip a song. I have to type in my passcode and before I can skip the song. This is a dangerous operation if one is driving. Is there a way to disable the auto lock or make it only apply to the e-mail app? Is Apple planning to improve this in future uprgrades to the software? If not I will not be using the Touch as my MP3 player and only as a PDA. An Mp3 player that auto locks after a few minutes is not much good.

    Apple's workaround for this is to tap the Home button twice. Then you get the basic player controls even though the unit is locked.
    I hate the Touch for car use. I am forced to stare at it to change anything and find it dangerous. I keep a 5G iPod video in a case for extended car use, and I can feel around the scroll wheel that way.

  • Auto-lock & AppleTV?

    Can Auto-lock be automatically disabled during movie streaming to AppleTV?
    Seemed to work with Acorn TV at first plays then started to required preventing auto-lock by touching the screen.
    I could turn off auto-lock in Setting but an auto keep 'playing' seems a better option.
    Thanks. 
    Craig

    Hi OldMT,
    Welcome to the Support Communities!
    You would need to set your Auto-Lock on the iPad to Never if you don't want it to go to sleep when using Airplay with your Apple TV.
    Sleep/Wake button - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9940ef67
    Set the auto-lock time. Go to Settings > General > Auto-Lock.
    Cheers,
    - Judy

  • Auto-Locking

    Ok, so just tonight I realized that my 1st gen iPod touch does not seem to want to go to sleep on its own. Even though I have the Auto-Lock time as 1 minute, it doesn't lock or sleep even 5 minutes of no activity. I reset and restarted my iPod but no luck. I haven't restored yet because I don't have time yet, but I will this weekend most likely and I'll give that a shot. I strongly go against restoring my iPod given if there is an option that does the job but doesn't require a restore as it takes me forever to put all my apps and settings back on even after restoring from back ups as they usually become corrupt.
    So does anyone know what could be causing my iPod to not lock/sleep after my desired auto-lock time?

    So yeah I marked this as answered because the problem stopped for a little bit last night and I didn't have time to see if this was temporary or not. So this after noon it happened again. So it seems like this is a random event that keeps happening to my iPod, which is a hassle because if I accidentally hit one of the buttons while its in my pocket, it could very well be draining my battery without my awareness. Also, IF the screen eventually locks, then when i hit the home button, it doesn't show the slide to unlock screen. However, when I hit the sleep/wake button, it prompts me to slide the slider.

Maybe you are looking for

  • Adobe Photoshop Elements 12 won't update

    Hi! I installed Adobe Photoshop Elements 12 and Premiere Elements 12 from DVD to my new iMac that is running OS X Maverics. Elements Organizer is crashing quite often and I found out that at least in some older versions the ElementsAutoAnalyzer might

  • Document attach to a PO

    Dear All, Could you please answer to my following query? Is it possible to attach a word or excel document to PO? Kindly note that we are using SAP 4.7 Ecc & workflow is not activated in the company code. Your earlier answer should be highly apprecia

  • Terminal is requesting a password-I don't use a pw

    I'm wanting to permanently silence the startup chime. After entering the requisite command line, the administrator's password is requested.  I don't have a pw on the computer so the response is "sorry, try again."  Do I create a pw just for chits-0an

  • Elements 13 question

    Hi there! I have been using Photoshop Elements 7 for years and just upgraded to Elements 13. With 7 under the create tab you have colleges and there are many templates. With 13 when I got to create a collage I only have one template option. How do I

  • Trace files being truncated after 18mb

    I have enabled trace file debugging for my application and after the trace file has reached approx 18mb, it stops writing to the file. Im also doing logging and the log file is usually around 80mb. Is there some sort of maximum file size restriction?