Exchange Forum not allowed to view

Hello
The Exchange Forum is unaccessible to my Adobe account.
When I enter in the Exchange Forum link it shows this message:
"Unauthorized
It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake."
Is there any special account permission needed to access Adobe Exchange Forum or it's an Exchange Forum problem?
Thank You for answer!
Massimo Novi

Thank You Jochem, it works now!
I have to say that there are already questions on that Exchange Forum about long acceptation times in Adobe Exchange area. Is probably a sensible problem and non always submitted material is accepted in short times.
I will try to post my problem on that forum, however.
Do You kindly know a more direct support help from Adobe on Exchange accepting workflow? Seems that others people with the same problem have had the same difficulty to contact Adobe for a direct response. There is no "Contact Adobe" link in Exchange area for my account, so I think does not exist. I would like to have mail address for some Adome support directly involved in Exchange acceptation workflow. My info panel has more than 500 downloads in CS4 release so I think the porting to CS5 should be useful.
Thank You for You help!
Massimo Novi
[email protected]

Similar Messages

It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.

I get this error: "It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.", when I try to view this Thread: http://talk.sonymobile.com/thread/60272
Give me access to the Thread and explain me where I broke the forum rule... First Sony sells me phone by deception and when I question Sony, I get kicked out of the Thread (by Sony hired Goons)....

respected admin,
when i connect my mobile with pc companion there's a update of 15.3.A.1.12 for Xperia L. But as usual for all user the update from pc companion becomes very slow while the update from update center from mobile means wireless update is comfortable and fast. But there is no update (15.3.A.1.12) seen in update center.
and as in the following link (of sony) its still showing 15.3.A.0.26..
Can you say how long will it take for the update (15.3.A.1.12) to come to the update center (wireless update) ?
and is the update 15.3.A.1.12 officially out..and if no how much time it will take?
Please do reply asap as there are many problems happening in .26 update.

Why do i see It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake." though I have bought an iMac and have a valid Appleid

why do i see It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake." though I have bought an iMac and have a valid Apple ID

Rattlehead18 wrote:
That means Apple banned you from that thread cause they think you speak the truth
This is complete rubbish. Please don't post misinformation - new users find the forums confusing enough without you adding to it.
When you see that notice it means that the thread or User Tip has been removed. A User Tip may have gone out of date and been removed at the author's request. With a thread it means that someone, usually the original poster, has violated the Terms of Use by ranting, spamming, personal abuse or other content which is not allowed. Consequently anyone else who tries to view that thread will see the message quoted above, which is a standard message in the forum software; the 'contact an administator' bit is irrelevant.

How can I print out CC invoices ? I receive a link in an email from Adobe but I am not allowed to view my invoices ???

I receive a personal link in an email from Adobe telling me that my account has been charged, but I am not allowed to view my invoices ???

Go to adobe.com. If you're not already logged in with your adobe id, log in. Under your name you should see a small button that says "manage account." Click it. Next select "Plans & Products." Under the Plans section, click "Manage Plan." On the new page, on the right is a "Billing History" section (it may take a second or to two to load to invoice info). Click the small print icon all the way to the right. You'll get a PDF form that you can download or print. Good luck.

Exchange calendar not allowing me to send meeting responses

Hi
Been using iphones with our SBS 2003 exchange server for a while now. I've gone from a 3G with V2 software to my current 3GS with 4.1. I think that the problem started when I got the 3GS with 4.1.
Basically, everything works with exchange apart from one very annoying thing.
If anyone sends me a calendar (meeting) invitation, it alerts me on the phone, allows me to see the meeting, but if I press accept, the phone ALWAYS says ' Calendar Invitation - Your response to the invitation cannot be sent'
It then deletes the meeting from the phone!.
Everything else seems to work, mail push, sending mail, creating contacts syncs with the work servers, I can also send out meeting invitations from my phone. It's just I can't respond to meetings i've received.
Anyone else have this?
Thanks
Andy

OlatheGIS wrote:
Has anyone considered/investigated the ActiveSync piece of the problem? I'm in a corporate environment with iPhones, iPads, Androids, and Blackberries. The only mobile device without problems are the BB's, which we run on a BES. We also have Exchange2003 and find that both iOS and Android devices ALL have issues with calendaring, primarily recurring appointments/meetings. The common denominator - MS ActiveSync. I *did* hear a rumor that Exchange2010 might fix the problem.
Well I'm in the same vote - we haven't investigated Android as of yet; however your notes are not promising for taking that road.
Exchange 2007 SP2.
BES 5.0.1 in use; BB 9300, 9700 (BB5), 9780 & 9800 (BB6).
iOS4.3.3/.4 on iPhone 4 in 2 main US offices, and now iPad 2 4.3.3 in our Corporate head office.
I have iOS5.0 Beta 3 in testing and have duplicated the infamous error with regards to accepting meeting requests on behalf of someone (delagate) yet iOS STILL thinks that the meeting is for the person receiving the meeting request (EITHER in Mail or in Calendar). Oddly enough we CAN deny the meeting request - even in iOS 4.3.3.
IOS was just updated today so I'll give it another go on Monday morning bright and early.
I do have a working case with Apple tier3 and soon to work with their Enterprise team on this matter.

SharePoint 2013 public facing site doesn't not allow to view lists

All,
I have couple of questions regarding Sp2013 internet facing site. I am using Windows Azure environment with my own AD, DNS, WFE and of course SQL. please visit http://sharepointpath.com to see what i am trying to achieve.
My questions are as below:
1) I am unable to access any of the lists for blog and team sites, when I click on any of the links it prompts for authentication. Web application is allowed anonymous access with "Entire site" not just lists and libraries.
2) blog site and team site doesn't inhering master page from parent. I have changed master page setting to inherit on all sub sites, but doesn't appears to be working as expected.
3) I am unable to access site using "www" CNAMe www.sharepoinpath.com
Any help on this would be much appreciated.
Thanks
Pramod
SP.UK | MCTS (Microsoft Office SharePoint Server 2007)

In addition to allowing the anonymous authentication method for the web application you also need to set the anonymous policy and enable anonymous access in the site.
Cloudshare has a good write-up about this. See How to Enable Anonymous Access to a SharePoint 2013 Site!
Jason Warren
Habanero Consulting Group
habaneroconsulting.com/Insights
@jaspnwarren

"It appears you're not allowed to view what you requested."

I've recieved this message several times now trying to view a discussion I started, furthermore, those discussions that were responded too by Linc Davis dont' show up in my list of topics I started.

Hi,
This sort of thing happens when either the whole thread is removed or a part of it that you are trying to Link back to.
The emails about new posts are sent out before the Poster can even Edit their post and certainly before the Hosts can look at it.
This means you have links that worked at the time the email was sent.
There is another link towards the top right of the email that link to the thread rather than the post (View Full Discussion)
You may be able to find the thread this way if only part of it has been removed.
If that does not work then the Hosts will have removed the whole thread from View.
If it was you that crossed some line in posting etiquette in some way then the Hosts will email you telling your why.
It may be that your post has been "lost" as it was linked below something that was removed, in which case you will not be told.
Some areas have many posts removed from view, others can have seemingly none removed.
9:15 pm Monday; June 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Not allowed to view pdf documents

It's telling me that I have to agree with the end user license agreement. I've downloaded adobe reader many times. It still does not let me

The way to launch an App is from Applications (the folder, in Finder), or from LaunchPad (the rocket icon).
When you do that Adobe Reader should start, give you a license agreement (one time) and run, showing "Adobe Reader" on the menu bar next to the apple icon.

Update still not allowing CR2 viewing Urgent help please

Hi, can anyone please help me urgently.
I have a new EOS 5 MkIII and trying to upload RAW CR2 Files into lightroom 3.
have updated to 3.6 versions as per instructions.
have updated camera raw etc,
please can someone help me what I have to do next to view and edit the images in Lightroom.
thank you!!!!
S.

You need Lightroom 4.1 or later.
OR you can download the free Adobe DNG Converter version 7.1, convert your RAWs to DNG and import those

It appears you're not allowed to...

I made a discussion here to ask a question about iPad, and I can't find it on the forum list here now and when I use the link to go to it directly it says: "It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake."
Please can someone tell me why this happens? it's not happened before.

Jpdunford wrote:
Ok thanks that's strange
Is there a way to find out what exactly was against the rules because all I was doing is asking about getting a 3G iPad to replace my dongle, and I asked why I can get 15GB for £15 on my dongle but on the iPad it seems more expensive (1GB=£10).
I honestly cant think of any reason this is against the rules
Possibly because Apple has nothing to do with data plans. Apple doesn't sell data plans, they don't service them, they don't control them, they don't set the prices. You purchase your data plan from the carrier you choose. Inquiries should be directed to your carrier. Just my guess. We don't need to get into the why's and wherefore's of data plans, which can be a topic of intense debate and argument.

Can't see InDesign FAQ here - "not allowed"

I'm logged in to forums.adobe.com (obviously since I am posting now) but when I click on the FAQ for InDesign, I get the message:
It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
The URL for that attempted click shows as http://forums.adobe.com/community/indesign/faq?promoid=KBHJE . Don't know what that promoid came from.
It's been a "challenging" day for me on my first day learning to use InDesign, including InDesign crashing on my 12 GB memory Mac Pro on my second page with really basic content and a couple of simple styles.
This wasn't what I was intending to post as my first post, but here it is! Onto my real question in a separate post.
- Rick

It's been a "challenging" day for me on my first day learning to use InDesign, including InDesign crashing on my 12 GB memory Mac Pro on my second page with really basic content and a couple of simple styles.
Please do upload your crash report to http://pastebin.com/ and post a link here and we'll try to decode it for you.

Some Kindle book photos are not able to view.

When reading ebooks using the Kindle App some do not allow for viewing the book's photos. Sometimes a reference to SETTINGS appears but I don't understand how or what Settings to change to allow for photo viewing.

Try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Child actions are not allowed to perform redirect actions. partial view

I'm using ASP .NET MVC 5
I'm trying to use Create view with the index view to show the created item in the same page. For that I'm using _CreateCategory as the partial view and I added following to the index view
{Html.RenderAction("Create", Model);}
My controller's get and post methods as follows for the Create
[HttpGet]
public ActionResult Create()
return PartialView("_CreateCategory",new Inventory.Models.Category());
[HttpPost]
[ValidateAntiForgeryToken]
public ActionResult Create([Bind(Include="Id,Description")] Category category)
if (ModelState.IsValid)
db.Categories.Add(category);
db.SaveChanges();
return RedirectToAction( "Index");
return PartialView(category);
}My index method as follows
public ActionResult Index()
return View(db.Categories.ToList());
I didn't do any changes to the partial view. I'm getting error "
child actions are not allowed to perform redirect action
. I tried many ways to overcome this. But no luck yet.

Please post ASP.NET questions in the ASP.NET forums:
http://forums.asp.net
The MVC forum is here: http://forums.asp.net/1146.aspx/1?MVC

HT201320 im trying to set a email up on the exchange and it will not allow me

I am trying to set a email in exchange and it will not allow me to do so

I have also tried the fixes offered in this forum such as using the "Other" mail in setting up the gmail accounts, and not using the dedicated gmail setting. I also went to google and signed in and enable the additional devices. I had the same problems with the original account I set up for gmail, but it corrected when i went to using the "Other" instead of the Gmail button. I was able to set up the new gmail accounts on my iphone without problem and on my husband's ipad1 for his gmail account. Just the ipad 2 is giving me problems. Again, thanks for any suggestions.

When I open iTunes, it will not allow me to preview or download TV shows. The preview and download options are gray and will not let me view them. I have the latest Quicktime so I don't know what's wrong

When I open iTunes, it will not allow me to preview or download TV shows. The preview and download options are gray and will not let me view them. I have tried installing the latest Quicktime but it tells me that I have to do software update and when I do, Quicktime does not appear to need an update. I have no idea what to do

Click on your preference and check the Parental tab for possible restrictions. Open iTunes, then click the iTunes menu, select preferences after the window opens click on the Parental icon, take a look at the content restrictions section.

Exchange Forum not allowed to view

Similar Messages

Maybe you are looking for