Exchange rate differences between GR and IR
Hi Gurus,
i have a problem about a exchange rate differences beetween GR and IR. Customizing setting is done based on this logic (transaction OMRW, ERD setting = blank).
For example: Goods Receipt amount is $100 and the posting is made with exchange rate 0,8. When busy with MIRO the user change manually exchange rate from 0,8 to 1,0. Moreover, the user change item amount from $100 to $150.
When the user simulate the posting in MIRO, transaction KDM is not activated (used).
Is to be underline that if item amount is not change but it remains untouched, transaction KDM is used correctly.
The system is:
SAP ECC 6.0
Software component: SAP_APPL
Release: 600
Level: 0016
Highest support package: SAPKH60016
Short description of software component: Logistics and Accounting
Have you any ideas about the reason of this malfunction?
Many thanks already in advance.
Stefano
Hi Gurus,
i have a problem about a exchange rate differences beetween GR and IR. Customizing setting is done based on this logic (transaction OMRW, ERD setting = blank).
For example: Goods Receipt amount is $100 and the posting is made with exchange rate 0,8. When busy with MIRO the user change manually exchange rate from 0,8 to 1,0. Moreover, the user change item amount from $100 to $150.
When the user simulate the posting in MIRO, transaction KDM is not activated (used).
Is to be underline that if item amount is not change but it remains untouched, transaction KDM is used correctly.
The system is:
SAP ECC 6.0
Software component: SAP_APPL
Release: 600
Level: 0016
Highest support package: SAPKH60016
Short description of software component: Logistics and Accounting
Have you any ideas about the reason of this malfunction?
Many thanks already in advance.
Stefano
Similar Messages
-
Exchange rate difference between MIRO and GR/IR
Hi,
Exchange rate difference between MIRO and GR/IR we need to written off as a expense for imported w/off expense and in case of assets we need to post exchange rate difference to exchange fluctuation account. Currently exchange rate difference is accounting under capital work in progress(Asset)instead of exchange fluctuation.
Thanks in Advance
Regards
Venkata SureshHi,
At MIRO stage, after entering PO number system will automatically populate the GRN value for selection. Here if you found that invoice value, which you have received from the vendor, is more than the system proposed amount, then you can adjust that diff amount in the GL account tab, which is next to PO reference tab in MIRO.
There enter the exch loss GL account and enter the diff amount.
Thanks,
Srinu. -
Exchange Rate - Differences between MIRO and F-43.
Hi All,
Anyone know if it is possible to include in MIRO, in a standard way, the field "Translation Date" presented in transaction F-43?
THNKS in advance!
BR
JECNo, not with std config
but you can do the custom developement.
make sure when you post the query
it should match you query and subject information
for this query the subject is diff than your query -
Exchange Rate difference between PO , GR and IR
Hi All,
I have a question, Does anyone know how to handle the PO exchange rate difference between PO , GR and IR time.
For example
1. PO creation on Jan 2009 - exchange rate = 1.2
2. GR creation on Feb 2009 - exchange rate = 1.5
3. IR creation on March 2009 - exchange rate = 1.7
Should GR and IR use the PO exchange rate # 1 for posting or use the current exchange # 2 for GR and #3 for IR ?
Thank you
AlexHi Alex,
The exchange rates in PO and GR and IR will be different as if you have are updating the rates per month in system so it will changed.
Regards,
Ninad Kshirsagar -
Currency exchange rate changed between GR and Invoice
Hi,
How we treat the difference of exchange rate occured between Good Receipt and Invoice (MIRO) ?
Please advise
Regards.Hi,
You can use MR11.
If you do not want the exchange rate difference to occure, then use the "Fixed Exchange Rate" in the PO header.
Regards,
SDNer -
Exchange rate difference in MIGO and MIRO
Dear Experts,
Our local currency is INR.
We have created PO and MIGO on 31.03.2015 with exchange rate 62.5908 without tick on fixed exchange rate in PO. OB08 is also same on 31.03.2015. But at the time of MIRO system showing error massage for configure KDM even if i put exchange rate manually (62.5908) in MIRO.
GR/IR Dr 62.5908
To Vendor NIL
Total 63.5908
I have also made down payment to this in UDS
Local Curr(INR)
Doc. Curr (USD)
Ex. Rate
PO No.
32,081,541.24
505,002.42
63.52750
5500200091
93,721,425.00
1,494,998.00
62.69000
Please advice how can i debug exchange rate 63.5908. if i assign GL on KDM then system will debit this difference in that GL
Thanks in advance. Your suggestions will be highly appreciated.
Best Regards,Hi Monika
Please also exchange how you have set up the treatment of exchange rate differences for your company code for LIV under the path:
IMG>Materials Management>Logistics Invoice verification> Incoming Invoice>Configure how exchange rate differences are treated
Check if you have N or X maintained here. If you have any of this config, you will need to maintain the GL Account in KDM as well
Regards
Sanil Bhandari -
Exchange rate variances between Primary and Secondary Ledger
We have a little problem on our hands.....we are implementing dual ledgers with dynamic posting, primary in Canadian Dollar and secondary in USD.
Exchange rate variances would occur if for example, we consider material transactions at different points in time. We would have no problems in the primary. However, CAD to USD exchange rates are updated monthly and very likely, rates would change month to month. Therefore, exchange rate variances would happen frequently in the secondary ledger.
We have been asked by senior management how these variances would be handled by EBS. Just wondering if you have ideas though we are looking into the accounting events in SLA.
Thanks,
SanjibIf the requirement was to maintain balance in USD and Canadian dollar, You can use the Reporting currency option instead of Secondary ledger.
Regards,
Chirag -
Exchange rate different between PGR and reverse GR
Hi,
We do PGR(vl32n) and reverse GR(vl09) in the same day for our import po,
but system picked different exchange rate which caused PPV exchange rate .
(We do not tick the fix rate in PO)
As per my knowledge,the GR&GR reverse exchange rate are controller by OBA7(document type WE),
Why there are different exchange rate,please correct me.
Jasonhi,
Exchange rates are to be defined in the table OB08...it defined for the period...which gets changed from time to time....so there is difference in exchange rates.....
Pls check...
Regards
Priyanka.P -
Exchange rate difference in IR AND CREDIT MEMO
Hi,
Toady our client has raised the invoice through migo with reference to PO with exchange rate of Rs.42.10 (from Exchange rate table) per us dollar .
But while doing the Invoice the same day through MIRO exchange rate is Rs 41. which is not maintained anywhere.
as a result there is a price difference .
Could you please help me to solve the above issue where exchange rate Rs.41 is taking?
Thanks.
V.KHi,
The have not maintained in info record. but PO the rate is GR rate only. -
Realized exchange rate difference in local and group currency
Hi Friends,
For a company code with local currency as Euro and group currency as USD, the setting in TR code OB22 for group currency is: Translation taking first local currency as a basis. When the open items are cleared, SAP posts difference in local currency and group currency. Sometimes, document currency is also group currency i.e. USD. The realized exchange difference is posted in Euro but it is not converted from Euro to group currency. Instead, system just calculates difference in group currency by comparing the value in group currency at the time of original transaction and when the transaction is cleared. Does anyone have dealt with such requirement and is there a way to be able to translate realized exchange differences from local to group currency?
Thanks and regards,
Pinky>Sometimes, document currency is also group currency i.e. USD.
Can you explain, it's because of your settings or because of SAP? -
H.264 data rate difference between local and distributed encode
Doing some testing today and noticed this curious behavior with compressor 3.5.1:
Set video encode for a 50 second 1080i uncompressed file to H.264 at 50000 kbps (50 mbps). Audio is 24 bit, 48khz stereo with no compression.
1. Sending the job to "This computer" for a local-only encode gives me a file size of 327 MB
2. Sending the same job to the same computer using distributed encoding gives me a file size of 211 MB
The data rate for the distributed encoded file is about 34 mbps, which isn't what was specified in the encode settings in Compressor. The data rate for the locally encoded file is about 52 mbps, which is what I would expect when the audio is taken into account.
Why the difference? Both encoded files are the same duration, so there aren't any missing frames. They both look good and play well but this is giving me cause for pause.
Also, another curious difference I noticed... The distributed file has the More Info fields populated with useful information in the Finder (dimensions, codecs, duration, channel count, total bit rate). The locally encoded file does not have this information.
-MattHi,
Not sure if this can be corrected whit customizing. Please see SAP note 1065932 for background on currencies in asset accounting. Some explanations on differences in currencies can be found there.
Regards,
Andre -
Avoid posting of realized exchange rate differences in 2nd local currency
Dear SAP fans,
The situation here in our company is that a company code is set up with NZD as 1st and EUR as 2nd local currency (currency type 30 "Group currency" for EC-CS consolidation).
Therefore, all postings (and balances) are also translated and saved in EUR (with the current exchange rate).
We now have an open item managed G/L account for prepaid expenses, which is used to collect postings which are then cleared later. It's however no payable/receivable account for vendors/customers. Therefore, it doesn't make sense to post realized exchange rate differences when clearing this account. This is however what SAP wants to do when we try to clear it.
For example, if I post today 100 NZD and two months later again 100 NZD to this account. If the NZD vs. EUR exchange rate changed in the meantime, then SAP won't let me clear this account without posting realized exchange rate differences, which makes however no sense.
Does anyone of you meet this problem before? Could you please give me a hint?
I thought about setting the "Only balances in local currency" indicator in the G/L account master but this helps only for differences between local and document currency (and not for differences in 1st and 2nd local currency).
Any help is highly appreciated!
Thanks and best regards,
PeterDear Padma,
Thanks for your answer. The customizing activities you mentioned are already set up in the system. This is not our problem.
The problem is however, that we don't want SAP to post automatically realized exchange rate differences between 1st and 2nd local currency as this doesn't make sense in this business case.
It's about an open item managed G/L account which is used to collect posting which are later cleared. It's not a payable/receivable account for customers/vendors where the posting of realized exchange rate differences makes sense.
We've thought about several solution which unfortunately all didn't help us:
- Don't setup realized exchange rate differences accounts or set them up only for group currency (in OB09)
- Set indicator "Only balances in local currency" in G/L master data
Best regards,
Peter -
Exchange rate difference while posting ME21N MIGO and MIRO
Hi All,
I am facing one problem with exchange rate type between M and EURX and EURX is maintanined in the SPRO>SAP Netweaver>General Settings>currencies>Check Exchange rate types
EXRT : EURX
Usage : EMU Reg,fixed
Ref.Curr : EUR
Buy.ra.at
Sall .Rat.At
Inv
EMU :X
FIXED
Scenario:
Company(USD) is maintaning Exchange rate type: M and no exchange rates are maintained for USD:EUR or EUR:USD.
Eur is maintaing in Exchange rate type EURX.
1) PO (ME21N) is posting for the Vendor on posting date 01/01/2008. Transaction currency is EUR and company code currency is USD and Quantity : 25000
--> Exchange rate 'M' is not maintained for EUR and values are picking from the EURX Type. In the PO, Exchange rate is picking correctly from the EURX table entries on 01/01/2008.
2) MIGO: GR is posted on 01/25/2008 and with 15000 Quantity. Exchange rate is getting currecly from the table on 01/25/2008.
3) MIRO: IR is posted on 02/15/2008 and Vendor Account is picking correct exchange rate from the table but GR/IR account is caluculations EUR:USD is differntly .
Note: It is not GR based IR.
Ex:
PK AC DESCRIPTION Tran Curr (EUR) Local Curr USD
31 5004789 Vendor Account 24,718.48- 38,777.12- USD
86 2525000 A/P-GR/IR NON-INV 24,718.48 38,883.73 USD
91 6584785 SERV-OTHER O/S 0.00 106.61- USD
Here GR/IR account is cal dirrently.
4) Credit Memo posted against IR on 03/25/2008. Exchange rate is given while posting CM same as Invoice. But system rate is different. Here also how the GR/IR is calculating is question is it not taking from Table or from any other rate types . Same problem like IR for GR/IR account.
Entry is posted like
PK ACC Description Tran curr(EUR) Local curr(USD)
21 5004789 Vendor 24,718.48 38,777.13 USD
96 2525000 /P-GR/IR NON-INV 24,718.48- 38,892.22- USD
81 6584785 SERV-OTHER O/S 0.00 115.09 USD
This problem is same like GR and also SPL document is posting differenly for ZG and ZL ledger.
ZL ledger is posting same like Accounting CM document ZG is posting with the different amount . This different amount is nothing but the exchange rate as per the posting date 03/25/2008. Exchange rate on 03/25/2008 is differe from IR date 02/15/2008 .
ZL ledger is calculating based on the 02/15/2008 date and ZG ledger is calculating based on the 03/25/2008 . Difference between Exchange rate entered in the CM and 03/25/2008 table entry rate is showing exchange rate difference field in the Addtional field in the document display.
Thanks in Advance.Dear Friends,
Thanks for your helpful answers, actually we are in big export business. So we have to clear 100s of invoice lines with payments at one go, (which obviously being booked at different dates) so it would be very difficult for the user to go one by one invoice.
My concern is, why system does not calculate exchange rate difference based on actual documents, i.e. Invoice to payments only. I think there might be some configuration needed to implement this functionality.
Please help.
Regards -
GR/IRclearing in MR11 in case of exchange rate difference
Hi Gurus,
My client has got one issue on GR/IR clearing thru MR11.
There is one PO with IR happend first( lets say on 01/01/2008) and then GR on 15/01/2008 . on the same day of GR , there is Goods return ( 15/01/2008) for complete good receitpt. Credit memo posted in next posting period ( ex. 02/02/2008) . As it is posted in different period there is exchange rate diffenence between Invoice and credit return. So when user is doing MR11 the system saying there is inconsistency for the difference amount. Thats the reason we could not able to clear that PO.
I need advice to clear the above PO in MR11.
anyinputs on this highly appreciated.
regds,
ramanHi Raman,
Did you ever figure out the issue above ? We have the same problem.
Thanks,
Kevin. -
Exchange rate difference in SAP MM
Hi experts,
Is there any way to bring the exchange rate difference at time of invoice to some other account rather than stock account.
The scenario is; for eg.
in PO : 1 USD = 50 INR
@ GRN 1 UDS = 55 INR
@ INV 1 USD = 60 INR
At the GRN, inventory will be updated with 55 INR.
At the INV, system will value vendor at 60 INR, but in Standard SAP, the difference of 5 INR will be updated as below.
1. exchange rate diff. will be posted to stock account if available stock qty is >= invoice quantity
2. exchange rate diff. will be posted to exchange rate diff acct (as per KDM) ,if available stock qty is 0
3. exchange rate diff. will be posted propotionately to stock account and exchange rate diff acct (as per KDM) ,if available stock qty is < invoice quantity
Is there any way, that system will post the exchange rate difference to separate account , rather than inventory.
It is because in client audit, the audit concern say, according to Indian standards, inventory should be valuated only one time in imports. In case of any differences, it should post to separate account and not inventory. They say SAP allows that. Client asked us the same.
I have checked, OMRW, but even after giving 'N' in ERD setting, system is posting to stock account only.
Any way to meet this??
Regards
sBkDear Sujith,
Exchange rate differences for a moving average price material will be
posted to the stock account, provide there is sufficient stock coverage.
Transaction OLMR -> Incoming invoice -> Configure how exchange rate
difference are treated.
If you set this selection field then the settings in the ERD Setting
column for this currency type are no longer relevant. The system
calculates and posts exchange rate differences between order-related
goods receipts and invoices not just for materials with standard price,
but also for:
* Materials with moving average price
* Account-assigned transactions
* Planned delivery costs
Because of this setting the exchange rate differences are posted to KDM
account instead of stock (BSX) or price difference (PRD) account
If you uncheck the field, exchange rate differences will be posted to
the stock or price difference account, for a moving average price
material, based on the stock coverage.
Please refer Sap note 980402 in detail
regards,
lalita
Maybe you are looking for
-
Can I edit the rpt file & change the datasource before loading the report?
We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name. In our testing we have determined that ReportDocument.Load tries to conn
-
Pages 5.2 multiple styles on the same line
I am using Pages 5.2 on OSX Mavericks. I would to use multiple styles on one line for research papers for school. For instance, I would like to be able to do this: in Pages. However, I have found that I need to create multiple styles to accomplish
-
Publish to .mac gallery with FCP
Hi with imovie 08 you can publish directly to the .mac gallery. i find this very useful because i can put movies online for my clients to review. But I work with FCP not imovie, does anyone know if there is a plug-in or something for fcp to export yo
-
Logical intervals on the x-axis
Ok, this is what I'm trying to do: I'm trying to make a graph that shows dissolved oxygen content at different distances from the source of a river. the 'y' axis is working well, going up in a logical, 2 ppm intervals. But the x-axis - the one I'm us
-
Deleted SMS still on display???
SMS messages that have been deleted (even from the full message list!!) still show up in the message list on the front display..using BB Dimension Today theme. Any ideas? Solved! Go to Solution.