Exchange Rate difference between PO , GR and IR

Hi All,
I have a question, Does anyone know how to handle the PO exchange rate difference between PO , GR and IR time.
For example
1.  PO creation on Jan 2009  - exchange rate = 1.2
2.  GR creation on Feb 2009 - exchange rate = 1.5
3.  IR  creation on March 2009 - exchange rate = 1.7
Should GR and IR use the PO exchange rate # 1 for posting or use the current exchange # 2 for GR and #3 for IR ?
Thank you
Alex

Hi Alex,
The exchange rates in PO and GR and IR will be different as if you have are updating the rates per month in system so it will changed.
Regards,
Ninad Kshirsagar

Similar Messages

  • Exchange rate difference between MIRO and GR/IR

    Hi,
    Exchange rate difference between MIRO and GR/IR we need to written off as a expense for imported w/off expense and in case of assets we need to post exchange rate difference to exchange fluctuation account. Currently exchange rate difference is accounting under capital work in progress(Asset)instead of exchange fluctuation.
    Thanks in Advance
    Regards
    Venkata Suresh

    Hi,
    At MIRO stage, after entering PO number system will automatically populate the GRN value for selection. Here if you found that invoice value, which you have received from the vendor, is more than the system proposed amount, then you can adjust that diff amount in the GL account tab, which is next to PO reference tab in MIRO.
    There enter the exch loss GL account and enter the diff amount.
    Thanks,
    Srinu.

  • AP- Why exchange rate type between Post invoice and Post payment is differe

    AP- Why exchange rate type between Post invoice and Post payment is different ?
    Hello,
    I have question
    when post AP invoice , document type KR
    document date = 11.12.2009
    posting date = 31.12.2009
    entry date = 05.01.2010
    this document using exchange rate type B (standard translation at bank selling rate) on 31.12.2009 (use posting date )
    but when post payment for above document,document type ZP
    document date = 25.06.2010
    posting date = 25.06.2010
    entry date = 24.06.2010
    this document using exchange rate type M (standard translation at average rate) on 23.06.2010
    please answer
    why do post invoice and post payment use different exchange rate type?
    and why at payment donot use posting date for get exchange rate ?

    Nanas,
    Sorry if im not  being clear...
    My point is: the difference rates customization for payments is done at FBZP.
    At Paying Company Codes, you have 4 flags for exchange rates differentes.
    At Control Data look:
    *Do not Post any Exchange Rate Differences:
    If the indicator is not set, the difference between the exchange rate at the time of posting and the exchange rate at the time of payment is determined for items which are posted in foreign currency. The payment program uses the translation rate in the currency table in the system for this purpose.
    *No Exchange Rate Differences for Partial Payments:
    Has the effect that the payment program for partial payments (requests for payment using transaction F-59) does not post exchange rate differences.
    *Processing of Bill of Exchange Payments:
    *Separate Payment for each Payment Reference
    Regards
    Bruno

  • Exchange rate differences between GR and IR

    Hi Gurus,
    i have a problem about a exchange rate differences beetween GR and IR. Customizing setting is done based on this logic (transaction OMRW, ERD setting = blank).
    For example: Goods Receipt amount is $100 and the posting is made with exchange rate 0,8. When busy with MIRO the user change manually exchange rate from 0,8 to 1,0. Moreover, the user change item amount from $100 to $150.
    When the user simulate the posting in MIRO, transaction KDM is not activated (used).
    Is to be underline that if item amount is not change but it remains untouched, transaction KDM is used correctly.
    The system is:
    SAP ECC 6.0
    Software component:  SAP_APPL     
    Release:  600     
    Level: 0016     
    Highest support package: SAPKH60016     
    Short description of software component: Logistics and Accounting
    Have you any ideas about the reason of this malfunction?
    Many thanks already in advance.
    Stefano

    Hi Gurus,
    i have a problem about a exchange rate differences beetween GR and IR. Customizing setting is done based on this logic (transaction OMRW, ERD setting = blank).
    For example: Goods Receipt amount is $100 and the posting is made with exchange rate 0,8. When busy with MIRO the user change manually exchange rate from 0,8 to 1,0. Moreover, the user change item amount from $100 to $150.
    When the user simulate the posting in MIRO, transaction KDM is not activated (used).
    Is to be underline that if item amount is not change but it remains untouched, transaction KDM is used correctly.
    The system is:
    SAP ECC 6.0
    Software component:  SAP_APPL     
    Release:  600     
    Level: 0016     
    Highest support package: SAPKH60016     
    Short description of software component: Logistics and Accounting
    Have you any ideas about the reason of this malfunction?
    Many thanks already in advance.
    Stefano

  • Exchange rate difference in FI document and PCA document.

    When we invoice with foreign currency, document exchange rate used in posting to FI but exchange type ‘M’ used in posting to PCA. Can we use document exchange rate to post to PCA?

    I dont think this is possible. Generally in PCA config setting you maintain this exchange rate type. Go to OKEQ and selelct verion 0 and click against Settings for PC accounting on the left hand side.  Here you can see the exchange rate type which is set. So you need to maintain the exchange rate type here. There is no way that document exchange rate can be set here.

  • Exchange Rate - Differences between MIRO and F-43.

    Hi All,
    Anyone know if it is possible to include in MIRO, in a standard way, the field "Translation Date" presented in transaction F-43?
    THNKS in advance!
    BR
    JEC

    No, not with std config
    but you can do the custom developement.
    make sure when you post the query
    it should match you query and subject information
    for this query the subject is diff than your query

  • Post exchange rate differences to separate account on invoice verification

    Dear expert,
    I'm facing a problem and need your guidance related to exchange rate differences between Goods Receipt and Invoice verification caused by time differences
    My company buy an asset using purchase order with account assignment.
    As an example:
      Asset price on PO      : 100 USD
    On Good receipt (Exchange rate 1 USD = 9,000 Rp)
    Journal created
      Asset                             900,000 Rp
         GR/IR Clearing                900,000 Rp
    On Invoice verification (Exchange rate 1 USD = 10,000 Rp)
    Journal created
    GR/IR Clearing                  900,000 Rp
    Asset                               100,000 Rp  (Exchange rate differences)
        Vendor                             1,000,000 Rp
    My Company wants to put "Exchange rate differences" into separate account (Gain/Loss realized account) instead throw it on asset because asset value would be change. How make it happend?
    I already try to configure KDM (Exchange rate differences) and OB09 and still exchange rate differences posted into asset

    Hi,
    Check config in transaction code Oba1 and Obyc. check posting G/L account of PO (KBS), n try to change in KDR Class.
    Regards
    Sanjeet Kumar

  • Currency exchange rate changed between GR and Invoice

    Hi,
    How we treat the difference of exchange rate occured between Good Receipt and Invoice (MIRO) ?
    Please advise
    Regards.

    Hi,
    You can use MR11.
    If you do not want the exchange rate difference to occure, then use the "Fixed Exchange Rate" in the PO header.
    Regards,
    SDNer

  • Exchange rate difference in SAP MM

    Hi experts,
    Is there any way to bring the exchange rate difference at time of invoice to some other account rather than stock account.
    The scenario is; for eg.
    in PO :   1 USD = 50 INR
    @ GRN 1 UDS = 55 INR
    @ INV    1 USD = 60 INR
    At the GRN, inventory will be updated with 55 INR.
    At the INV, system will value vendor at 60 INR, but in Standard SAP, the difference of 5 INR will be updated as below.
    1.  exchange rate diff. will be posted to stock account if available stock qty is >= invoice quantity
    2.  exchange rate diff. will be posted to exchange rate diff acct (as per KDM) ,if available stock qty is 0
    3.  exchange rate diff. will be posted propotionately to stock account and exchange rate diff acct (as per KDM) ,if available stock qty is <  invoice quantity
    Is there any way, that system will post the exchange rate difference to separate account , rather than inventory.
    It is because in client audit, the audit concern say, according to Indian standards, inventory should be valuated only one time in imports. In case of any differences, it should post to separate account and not inventory. They say SAP allows that. Client asked us the same.
    I have checked, OMRW, but even after giving 'N' in ERD setting, system is posting to stock account only.
    Any way to meet this??
    Regards
    sBk

    Dear Sujith,
    Exchange rate differences for a moving average price material will be
    posted to the stock account, provide there is sufficient stock coverage.
    Transaction OLMR -> Incoming invoice -> Configure how exchange rate
    difference are treated.
    If you set this selection field then the settings in the ERD Setting
    column for this currency type are no longer relevant. The system
    calculates and posts exchange rate differences between order-related
    goods receipts and invoices not just for materials with standard price,
    but also for:
    * Materials with moving average price
    * Account-assigned transactions
    * Planned delivery costs
    Because of this setting the exchange rate differences are posted to KDM
    account  instead of stock (BSX) or price difference (PRD) account
    If you uncheck the field, exchange rate differences will be posted to
    the stock or price difference account, for a moving average price
    material, based on the stock coverage.
    Please refer Sap note  980402 in detail
    regards,
    lalita

  • Only reseting the cleared documents with exchange rate differences in FBRA

    Hello,
    we want only reset the cleared documents . We dont want to reverse the cleard documents. But When we try to do it we get a message Exchage difference are posted do you want to reverse it. Want we want to reset are in Doc.. currency. postings for August.
    As i know when we have exchange rate difference we  dont get an option only resettng but we get reseting and reversing.
    May i know how to slove this situation.
    Thank you
    Chaithra

    HiI
    f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
    Materials with moving average price
    Account-assigned transactions
    Planned delivery costs
    The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
    If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
    Regards
    Antony

  • Avoid posting of realized exchange rate differences in 2nd local currency

    Dear SAP fans,
    The situation here in our company is that a company code is set up with NZD as 1st and EUR as 2nd local currency (currency type 30 "Group currency" for EC-CS consolidation).
    Therefore, all postings (and balances) are also translated and saved in EUR (with the current exchange rate).
    We now have an open item managed G/L account for prepaid expenses, which is used to collect postings which are then cleared later. It's however no payable/receivable account for vendors/customers. Therefore, it doesn't make sense to post realized exchange rate differences when clearing this account. This is however what SAP wants to do when we try to clear it.
    For example, if I post today 100 NZD and two months later again 100 NZD to this account. If the NZD vs. EUR exchange rate changed in the meantime, then SAP won't let me clear this account without posting realized exchange rate differences, which makes however no sense.
    Does anyone of you meet this problem before? Could you please give me a hint?
    I thought about setting the "Only balances in local currency" indicator in the G/L account master but this helps only for differences between local and document currency (and not for differences in 1st and 2nd local currency).
    Any help is highly appreciated!
    Thanks and best regards,
    Peter

    Dear Padma,
    Thanks for your answer. The customizing activities you mentioned are already set up in the system. This is not our problem.
    The problem is however, that we don't want SAP to post automatically realized exchange rate differences between 1st and 2nd local currency as this doesn't make sense in this business case.
    It's about an open item managed G/L account which is used to collect posting which are later cleared. It's not a payable/receivable account for customers/vendors where the posting of realized exchange rate differences makes sense.
    We've thought about several solution which unfortunately all didn't help us:
    - Don't setup realized exchange rate differences accounts or set them up only for group currency (in OB09)
    - Set indicator "Only balances in local currency" in G/L master data
    Best regards,
    Peter

  • Currency exchange rate differences in rebate agreement settlements

    Hi Experts,
    My customer has issue in Rebate agreements and final settlements.
    ISSUE:
    Rebate agreement currency is EUR
    Billing document currency is EUR
    Company code currency is SEK
    Initially ( Before final settlement)
    The accrual amount in sales volumen 3151.05 EUR
    the accrual amount in drill down 3152.05 EUR
    After Final settlement
    The accrual amount in sales volumen 2.62 EUR
    the accrual amount in drill down 3152.05 EUR
    The accounting documents shows after final settlement
    customer A/c 3151.98 EUR credit
    Expenses A/C 3151.98 EUR debit
    Accrual A/c 3149.43 EUR debit
    Expenses A/C 3149.43 EUR credit
    The difference of 2.55 EUR is due to currency differences.
    there is no retrospective rabte processing .
    Kindly give your expertise resolve the issue of currency exchange rate difference in customer currency.
    Immediate response is highly appriciated
    Thanking you
    With regards
    Murali
    Message was edited by:
            Murali Krishna Lanka
    Message was edited by:
            Murali Krishna Lanka

    HiI
    f you set this selection field then the settings in the ERD Setting column for this currency type are no longer relevant. The system calculates and posts exchange rate differences between order-related goods receipts and invoices not just for materials with standard price, but also for:
    Materials with moving average price
    Account-assigned transactions
    Planned delivery costs
    The valuation of the inventories or consumption is effectively done at the exchange rate for the goods receipt, and not at the exchange rate of the invoice. When you post the good receipts, the fixed exchange rate from the purchase order is not used, but the translation of the purchase order values to local currency is always done at the posting date of the goods receipt.
    If you are using the material ledger with actual costing, the system does not include the posted exchange rate differences at period-end closing in the actual prices of the materials.
    Regards
    Antony

  • Exchange rate problem between GR&IR for PO with account assignment category

    ear SAP experts.
    We have used expense puchase order through account assignment category.
    the cost object include cost center,sale order,order.because we don’t use Fixed assets module in SAP,when purchase fixed assets,we also use account assignment category but no need to fill assets number(Not use account assignment category A).
    the processing in current system when there is exchange rate difference between GR&IR  as follows.
    purchase order Currency :USD  company code currency:HKD
    example 1-- when something purchased into expense account,
    Good receipt  (1USD=7.75HKD)
    Dr :expense account  100USD    775HKD
      Cr: GR/IR        100USD    775HKD
    Invoice receipt
    Dr : GR/IR         100USD    775HKD
        Expense account            25HKD
    CR: Vendor        100USD    800HKD
    Example 2-- when something purchased into Fixed assets account,
    purchase order :USD  company code currency:HKD
    Good receipt on Oct .01. 2007  (1USD=7.75HKD)
    Dr :Fixed assets account  100USD    775HKD
      Cr: GR/IR           100USD    775HKD
    Invoice receipt on Dec.01.2007  (1USD= 8HKD)
    Dr: GR/IR              100USD     775HKD
       Fixed assets account                25HKD
      Cr: Vendor            100USD     780HKD     
    The fixed assets is depreciated from Nov,2007.
    There is one problem that after the fixed assets is depreciated, the value for the fixed assets is added , the finance clerk have to adjust the added value from fixed assets account to Exchange Difference-Gain/Loss account by manual.
    Our problem is
    How to configure in order to make  the exchage rate difference into Exchange Difference-Gain/Loss account for purchase order with account assignment category,not the original assigned account in purchase order item.
    Many thanks
    Fanny

    Hi Fanny
    Even though the question is bit unclear, I guess you are looking for the T-Code OBYC. Use transaction key KDM for configuring the exchange gain/loss
    S Jayaram

  • Posting of Exchange rate differences in parallel currencies

    Hello experts,,
    We are on ECC 6.
    When we enter an incoming invoice with MIRO and the current exchange rate differs from that in the PO, the exchange rate differences in local currency and in parallel currency (group currency) post to different accounts.
    Is this a standard feature / behavior? If so, where can i find the settings.
    Shouldn't the postings in all currencies (except doc currency), in the event of exchange rate difference post to the same account?
    The material ledger is not active.
    We have maintained a local currency and a group currency.
    Example to illustrate my issue -
    DC = JPY
    LC = SGD
    GC = USD
    PO for asset.
    PO value = 100000 JPY
    Ex rate not fixed in the PO.
    Ex rate at PO -
    100 JPY = 1.6 SGD
    100 JPY =  0.85 USD
    Ex Rate at IR
    100 JPY = 1.7 SGD
    100 JPY =  0.9 USD
    When IR is entered,
    The exchange rate difference of 100 SGD (@ 0.1 per 100 JPY) is posted to the asset. No posting in USD (though there is a balance of 50 USD).
    At clearing (Transaction FB1S - GL account clearing) the exchange rate difference (in GC only, because no balance in LC) of 50 USD (@ 0.05 per 100 JPY) is posted to the Exch. rate difference GL acct.
    Thanks in advance for your advice/solution.
    B. Regards,
    Halaswamy

    Hello,
    1.  You have to assign Forex GL's for the reconciliation accounts in OB09.
    2.  At the time of payment for incoming invoices, system can read the valuation differences and it will post to Realized Gain/Loss accounts and B/S adjustment account.
    3. You can consider this amount to issue bonus to your customers.
    Rgds
    Murali. N

  • Exchange rate difference KDM in MIRO - cost center used

    We have recently testing to setup KDM Exchange rate difference posting in LIV and encounter the problem of cost center cannot be determine for PO with account assignment A (For asset) and P (for Project).
    The question is how does the system determine the cost center for the exchange rate different account? It doesn't take the default cost center from the configuration in OKB9 but extract the cost center from PO Account Assignment - for Asset Account assignment, there is no cost center in PO and thus it is giving a error of 'Field Cost Ctr is a required field....'
    Any help appreciated.

    Dear Murali: Yes, GL account is maintained in OBYC for KDM transaction, I am following the OSS note 980402 for the setup (ECC6 system). The GL account say is 60000005. In OB09, we have maintained the entry for this account 60000005 to have a default cost center (e.g. 1000). This cost center does not get defaulted when MIRO posting is done with exchange rate difference. Instead, the cost center is obtained from the PO (e.g. the account assignment in PO have cost center 5000). But for certain account assignment (e.g. 'P' for WBS and 'A' for Asset), there is no cost center maintained in PO account assignment and thus in MIRO i get an error message as mentioned above.
    Dear SAPFICO: check the asset master also, althrough there is a cost center in Asset Master, it does not get extracted into MIRO postings.

Maybe you are looking for

  • How to change the color of Menu links in obiee

    Does anyone knows how to change the colors of Menu links in obiee. With menu I mean the menu links default right top (Search, homepage, Catalogus, Dashboards, new, Open). This should be set in skin and style files, not? I searched a lot. I could not

  • Problems booting Mac color

    Hello Problems booting Mac color I'm a Mac Pro models: MD 313 System OS: Lion 1.7.4 My Mac Index (before Apple logo) is blue. I need to be gray? Or has a problem with my Mac? Please please help? I'm worried. Please help with your photos. Thanks

  • Two iMacs each with separate Apple ID.  Can I merge onto one Mac?

    Two iMacs each with separate Apple ID.  Can I merge onto one Mac?

  • Fetch phase in a trace file

    Oracle version: 11.2.0.3.0 Enterprise Edition OS - IBM/AIX RISC System/6000 I am trying to generate a trace file from a piece of code executed by java server. What I asked the java developer to do is to place this block immediately after establishing

  • Value Contract for a material group

    It is possible to create a contract on value basis for a particular material group without material masters. Thanks Sanjeev