EXchange rate problem

Hi BW experts,
I getting following error in report :
No exchange rate from CAD to USD and date 28.02.2007 found (currency transl. TRAV/TRAV)
Notification Number BRAIN 380
I am getting this message for only 4 months i.e March April,May,June but rest of months its fine.
Currency translation is done in query with a variable.
I tried the following solutions:
1.transfer Exchange rates from source systems Via Program :RSIMPCURR
2.I checked in Table TCURR and there exists a exchange rates between CAD to USD.
3.I checked TCODE: RSCUR the variable exists and created properly.
4.I searched through forums but none of them present a clear solution.
SO can somebody help me to solve this error ,its very urgent
null
Message was edited by:
NRUPAL CHOWDARY

So check in OB08 which gives the overview of Currency Exchange Rates for each month.Check what is the exchange rate maintained for the months u r looking into.
Else ask the users what exchange rates they maintained for those months and upload the exchange rates for those months.
Here is the link which will explain how to load the exhange rates.
http://help.sap.com/saphelp_nw04s/helpdata/en/36/412ad80cb511d5b2df0050da4c74dc/content.htm
Thanks & Regards,
Suchitra.V

Similar Messages

Exchange rate problem between GR&IR for PO with account assignment category

ear SAP experts.
We have used expense puchase order through account assignment category.
the cost object include cost center,sale order,order.because we dont use Fixed assets module in SAP,when purchase fixed assets,we also use account assignment category but no need to fill assets number(Not use account assignment category A).
the processing in current system when there is exchange rate difference between GR&IR as follows.
purchase order Currency :USD company code currency:HKD
example 1-- when something purchased into expense account,
Good receipt (1USD=7.75HKD)
Dr :expense account 100USD    775HKD
Cr: GR/IR        100USD    775HKD
Invoice receipt
Dr : GR/IR         100USD    775HKD
    Expense account            25HKD
CR: Vendor        100USD    800HKD
Example 2-- when something purchased into Fixed assets account,
purchase order :USD company code currency:HKD
Good receipt on Oct .01. 2007 (1USD=7.75HKD)
Dr :Fixed assets account 100USD    775HKD
Cr: GR/IR           100USD    775HKD
Invoice receipt on Dec.01.2007 (1USD= 8HKD)
Dr: GR/IR              100USD     775HKD
   Fixed assets account                25HKD
Cr: Vendor            100USD     780HKD
The fixed assets is depreciated from Nov,2007.
There is one problem that after the fixed assets is depreciated, the value for the fixed assets is added , the finance clerk have to adjust the added value from fixed assets account to Exchange Difference-Gain/Loss account by manual.
Our problem is
How to configure in order to make the exchage rate difference into Exchange Difference-Gain/Loss account for purchase order with account assignment category,not the original assigned account in purchase order item.
Many thanks
Fanny

Hi Fanny
Even though the question is bit unclear, I guess you are looking for the T-Code OBYC. Use transaction key KDM for configuring the exchange gain/loss
S Jayaram

Exchange Rate problem in BW

Hello Friends,
The Currency Translation of all BW Web reports is ending with below error message.
After opening report on Web, below things are not working and ending with same below error message.
"System error in program CL_RSR_WWW_CTRL_DDOWN and form ADD_ITEM:01"
Right click on web report and go to
Currency Translation
Variable Entry
Query Properties
Export (Working some times and not working some time)
For all BW reports, the above 4 things are
Not working only on Web
Working Fine in RSRT
Working Fine BEx Analyser
So, it is not working only on Web and working fine with Excel.
I have found some SAP Notes (812737 & 995675) on this problem, but according to these Note suggesstions, we have checked for errors and unable to find any errors or blanks in Exchange rates (TCURR or OB08 ). We have also checked programme "RCURTEST" and no solution was found.
Can any one please suggesst us. what could be the problem?
we are on 3.5 version with patch 13.
Thank you.
Tony

hI
Replicate the entire source system
Rigt click on source system replicate meta data then
search it
Cheers
Ogeti

Invoice verification----exchange rate problem

Dear All.
We use expense Purchase order. When PO do goods receipts, the debit account is assigned to the expense account through account assignment category. The accounting process is as follows:
But when the purchase orders currency is foreign currency ,when the exchange rate at the time of the good receipt is differ from the exchange rate at the time of the inovic receipt.there exist exchange rate difference. Currently the system process as follows:
Do good receipts:(exchange rate: usd/rmb = 7.75).
Dr: expense account   usd 100 (rmb 775)
Cr: GR/IR         usd. 100 (rmb 775)
Do invoice receipts:(exchange rate: usd/rmb =8).
DR: GR/IR            usd 96.875 (rmb 775)
   Expense account   usd 3.125 (rmb 25)
CR: AP-vendor        usd 100 (rmb 800)
Now I have a problem.:How I should configure in order to the exchange rate difference(RMB25) can be into exchange rate account not the original expense account.

Define Auto posting for exchange rate difference : OBA1.
Anyway, u should tick GR-non valuated option for expense PO then this problem will not be occurred.
Rgds.

Currency exchange rate problem when posting to CO-PA

Hi Experts,
we get error when posting a credit memo saying that there is a missing exchange rate between MXN and USD. The document currency is MXN (Mexican peso), company code currency is EUR and operating concern currency is USD. The document posts to CO-PA.
We have exchange rates for MXN/EUR and EUR/USD but not for MXN/USD.
How the system recalculates the currencies?
Do we just have to enter the MXN/USD rate or is there any other customizing we should check?
In country global parameters for Mexico in fields 'index-based currency' and 'hard currency' is entered USD. Does this matters to this problem?
Thank you,
Michal

Hi Michal,
concerning your quastion pls consider follwing:
Usually the foreign currency will be the transaction currency of the sender document in case you are dealing with
billing documents.
However it's also possible that the amount in operating concern currency is translated based on company code curreny.
In this case the PA line item will then contain the company code currency as foreign currency.
This translation logic is described in the note 429517.
I hope, it could you help to understand translation logic.
Regards, Andrea

Exchange rate problems

Hi all
While releasing the billing document to accounts at [VF02], I am getting the following error
Enter rate INR /   INR rate type M for 06.04.2007 in the system settings
Message no. SG105
Diagnosis: For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure: Add the missing entry in the currency conversion table.
You can then continue to process the commercial transaction.
I tried all the above procedures with FI MM & ABAP consultants and in vain
Please help
Regards

HI
To maintain currency exchange rates, use t.code OC41
   GO to new entries----
>here maintain
   exchange rate 'M' standard
   valid from     -
    date
   from            -
   euro
   drpqot         -
    75
   to              -
     INR
                   Award points if it is useful
                     Regards
                       Prasad.G

Exchange rate problem at the time of MIRO

Dear all
Po is created for 21,00,000 EA qty with rate of 1 USD=44.22130 INR
GR done for QTY 7,00,000 EA qty and Invoiced received for 7,00,000 qty at the rate of 1usd=43.2 Inr, now if i m trying to invoice almost 80,00 usd we are paying more im tring to chnage in MIRO t.code in details tab Exchange rate but it was in Display (greyed) how can i change the exchange rate for this amount or how can i post the Invoice...
Please advice me.
Regards
venu gopal

Hi,
If you have not checked the indicator 'Exch Rate Fixed' indicator in PO header tab 'Delivery/Invoice', then you can change the exchage rate at MIRO.
For this, follow the steps below in their exact sequence.
1. go to MIRO
2. Enter the 'invoice date' in Basic data tab
3. Go to 'Details' tab in invoice header. Enter the desired exchage rate here.
Now proceed further and allocate the invoice to the desired PO or del note etc...
You will not be able to change the exchange rate once the invoice has been allocated.
rewards if helpful..

Exchange Rate problem at the time of sales Invoice

hi experts
Exchange rate type AR is made for Sales
at the time Sales Order amount is being picked from exchange rate type AR but at the time of Sales Invoice the amount is being picked from Standard Rate Type M at the header level but at the item level from AR only
Plz help in this regard
Sudhir Poddar
SAP FI Consultant

Hi Sudhir,
SAP will pick Exchange rate type M for translations by default and you cannot change it. So you have to change the exchange rate type for your invoice or maintain same rates for that day alone.
This is what is given in SAP documentation:
"For posting and clearing, the system uses the exchange rate type M (average rate). This exchange rate type must be entered in the system and you must also enter the exchange rates for this type."
For more info on exchange rate types read this:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/a6/004940f0030272e10000000a155106/frameset.htm
Regards,
Ravi

Exchange rate problem in controlling document

Hi Friends
I have posted CJ45 (over head run) and posted documents in cost center and pca.
we wanted to know which exchange rate was taken for posting in different currencies (Controlling area and PCA).
Can any one please help me any table where can we find co document posted amount with exchange rate considered?
Advance thanks!
GK

Hi,
Controlling Document can be checked in Table COEP (CO Object line item table).
PCA: Table GLPCA
Hope this helps.
Thanks,
Ashok

F-53 payment clearance Exchange Rate Difference

HI
There is a exchange rate problem while clearing Purchase Order. In Freight condition P/o is Total amount in $ is 819.77 while theexchange rate is Rs/$= 86 which is ok at vendor invoice level .
Problem area is F-53 when we clear payment system pick old rate which is Rs/$ =61.0299.
it giving problem for only one vendor.
thanks
thomas

Hi,
Check in po header whter exch rate fixed tick box is ticked.
Regards

Problem while 're-posting' a cancelle Invoice with Exchange Rate Difference

Hi Gurus,
We are facing a problem while re-posting an Invoice with Exchange Rate Difference. I say re-posting because this invoice was previously posted and reversed on the same date. Here is the scenario along with the relevant postings:
1)
G/R is posted in September when the exchange rate for dollar was, say, Rs. 49 = 1 USD.
Posting:
Service A/C.....100 USD (Rs. 4900)
     To SR/IR Clearing A/C...100 USD (Rs. 4900)
2)
MIRO is done in October, when the exchange rate was, say, Rs. 48 = 1 USD. Thus, the exchange difference posting was done in the respective accounts.
Posting:
SR/IR Clearing A/C......100 USD (Rs. 4900)
     To Vendor A/C...........90 USD (Rs. 4320)
     To TDS A/C..............10 USD (Rs. 480)
     To Exch. Difference A/C. 0 USD (Rs. 100)
This was the correct entry, however we missed out some TDS codes and thus needed to reverse this entry and repost it.
3)
Now this invoice was reversed (T.Code MIRO) in october itself on exactly the same date on which invoice was created, and it resulted in the following postings:
Vendor A/C......90 USD (Rs. 4320)
TDS A/C.........10 USD (Rs. 480)
     To SR/IR Clearing A/C...100 USD (4800, i.e. 48 * 100, Rs.48 being the exchange rate in october)
4)
Now when we try to post MIRO again, it is posting the following entry:
SR/IR Clearing A/C......97.96 USD (Rs. 4800)
Exch. Difference A/C.....2.04 USD (Rs.    0)
     To Vendor A/C........... 85 USD (Rs. 4080)
     To TDS1 A/C............. 10 USD (Rs. 480)
     To TDS2 A/C............. 5 USD (Rs. 240)
This is a wrong entry. SR/IR clearing A/C should have been debited by 100 USD (Rs. 4900), and the Exch. Rate difference account should have been credited by 0 USD (Rs. 100)
Can someone please help us with this. What the system seems to be doing is, that when the Invoice was reversed, the value that got reversed for SR/IR Clearing A/C was 100 USD but with Rs. 4800 instead of Rs. 4900. Now, when we try to repost the invoice, the system divided this value by the exchange rate prevalent in September, i.e. Rs. 49, thus the resultant value 97.96 USD (i.e. 4800 / 49).
Please help.
Thanks!
Regards,
Angad Nagpal

Solved.
The final entry is correct, as the net result in the G/L balances is the same. For further information please refer to notes 116250 and 46564.
Thanks!
Regards,
Angad Nagpal

Problem with depreciation area (Incorrect currency exchange rate is used)

Good day to all SDN forumers!
I'm having a problem with one depreciation area that we set up. The reason why we configured this depreciation area is for us to enable to monitor all asset postings in another (group) currency aside from the local currency. We set it up in such a way that the depreciation would not post and would thus only "convert" the asset postings to group currency using the table rates in table TCURR (via OB08).
The problem is despite having defined an exchange rate for the current period, the system still picks up the exchange rate for 01/01/2001 which is incorrect. This affected all reports which displays incorrect values whenever I view the postings using the 2nd depreciation area we set up. Is there a way we can correct this?
I'd really appreciate your comments and suggestions guys. Thanks a lot and more power!

Update:
I created a new depreciation area by copying an existing area and updated some of the configuration. The problem is still there though, since the depreciation area still reflects the incorrect rate (similar to that of the previous depreciation area) whenever I access it using Asset Explorer. What's surprising is that even though I've already set the exchange rate (e.g. USD to EUR) to match that of the asset's capitalization / acquisition date, the posted values still do not reflect what I defined in table TCURR. Instead, it reflects the exchange rate used by the old depreciation area. Help anyone? We are already in a production client and transfer/retirement of all the assets is not an option the client would like to undertake.
Edited by: Patrick on Nov 6, 2008 4:45 AM

Exchange Rate Type Problem

Hi All,
I have problem with Exchange rate conversion. The system is not picking correct Exchange rate in billing Invoice of FI from SD.
The scenario is I have created Exchange rate type as Z and alternate currency type is FGE1. I created new one because bussines does not want to use EURX as it is fucltuating it needs fixed rate type. So I have create Z & FGE1 as exchange rate type.
Now In customer Master I have in Sales area Tab I have maintained Z as exchange rate type. So I create SO in SO I can see it is showing me Z as exchange rate conversion value.
So when it comes to Accounting Document the values from GBP to EUR get converted into EURX rate type. Which is very surprising to me. My company code Currency is EUR Dcouemtn CUrrency is GBP.
So can some one give me where the problem is arising.
Regards,
Kiran.

Hi,
Use transaction OBA7 and check if exchange rate EURX type is defined for document type RV
Remove entry EURX in the document type RV and maintain Z or FGE1 whichever you want....it will be done..
Regards,
Chintan Joshi

Investigation on the problem why the exchange rate in the invoice is not u

Hi,
Informed by customer that the exchange rate (HKD-MOP) of ULP has been changed to 1.0309 from 1.03 since 26 Aug. The corrected exchange rate should be 1.03
Would you do the investigation on the problem why the exchange rate in the invoice is not updated?

Hii..
In T Code OB08 Update the Exchange rate that is applicable from the date which you want.
Regards,
Aakash

Problem in Currency Exchange Rates

Hello All,
This question is connected to currency conversions from GBP to EUR in Sales Transactions. We have defined 2 Exchange Rate Types between GBP to EUR.
One Exchange Rate Type (example "ZZZZ") is from NETHERLANDS to the internal INTER-company Customer in Britain.
The other Exchange Rate Type (example "YYYY") is for Sales from SPAIN to External customers in Britain.
These exchange rate types ZZZZ and YYYY are defined in the respective customer masters and there are conversion Ratios maintained for both in OB08.
T/Codes OB07 & OB08 are maintained. Tables TCURF & TCURV are maintained.
Problem:
For Intercompany Customers with Rate Type ZZZZ: The system is taking the correct currency conversion of Rate Type ZZZZ in the Accounting documents of Intercompany Invoices as defined in OB08 for ZZZZ.
For Sales to External Customers with Rate Type YYYY:
The system ignores the Ratio maintained for Exch Rate Type "YYYY" in the Customer Master and prefers the EURX Rate in the Accounting documents of customer Invoices.
Thanks,
Srinivas

Hi Srinivas,
Go to OBBS and find the transalation ratios between the currency pair GBP to EUR with exch rate type YYYY.
For that row, there is a field called Alternative exch rate type must have been assigned as EURX.
Remove it and SAVE and post your sales document now.
This will resolve your issue.
Thanks,
Srinu

EXchange rate problem

Similar Messages

Maybe you are looking for