Exchange Server 2010 Installation Error

I am installing Exchange 2010 on a fresh Windows 2008 Server, and done with all the Prerequisites. but still i am getting this error...
I have Added These commands also to powershell.
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,Web-Asp-Net,Web-Client-Auth,Web-Dir-Browsing,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Filter,Web-Request-Monitor,Web-Static-Content,Web-WMI,RPC-Over-HTTP-Proxy
Still m not able to instal.
HELP:
mohit

Hello,
Please follow the Willard's suggestion.
Besides, please use dcdiag command-line tool to check if DC server run normally.
Please use telnet command-line tool to check 389 /3268 is opened on firewall.
Please restart Microsoft Exchange Active Directory Topology Service to check the result.
Cara Chen
TechNet Community Support

Similar Messages

  • Exchange Server 2010 OWA Error 405 StaticFileModule

    I am running Exchange Server 2010
    (Version 14.1 - Build 218.15) on Windows Server 2008 R2. This is a all-in-one-server roles installation. Everything is working fine except forms-based authentication. When enabled I get HTTP Error 405.0 "Method not allowed". The page
    you are looking for cannot be displayed because an invalid method (HTTP verb) is being used.
    Details are:
    Module StaticFileModule
    Notification ExecuteRequestHandler
    Handler StaticFile
    Error Code 0x80070001
    Requested URL https://localhost:443/owa/auth/owaauth.dll
    Physical Path C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\owa\auth\owaauth.dll
    Logon Method Basic
    Logon User administrator
    When in EMC, Client Access, on OWA & ECP tabs I change authentication forms-based to standard with basic check box and restart IIS the Web Access works fine.
    I have already tested solutions like recreating Virtual Directories, Allow .Net 2.0, etc. I have also checked all the modules and the associated mappings in IIS one by one for every VM. I believe this is an error in a .config file. If you have encountered
    a situation like this please help.

    Hi Pantelis,
    Please make sure that the client sends a request that contains a valid HTTP method.
    1. Click Start, type Notepad in the Start Search box, right-click
    Notepad, and then click Run as administrator.
    Note If you are prompted for an administrator password or for a confirmation, type the password, or provide confirmation.
    2. On the File menu, click Open. In the
    File name box, type %windir%\system32\inetsrv\config\applicationhost.config, and then click
    Open.
    3. In the ApplicationHost.config file, locate the <handlers> tag.
    4. Make sure that all the handlers use valid HTTP methods.
    5. Save the ApplicationHost.config file.
    More details to see: http://support.microsoft.com/kb/942051
    Please also try to re-build OWA Virtural Directory. To see:
    http://support.microsoft.com/kb/941201
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Exchange Server 2010 Installation

    I am getting the following error while installing Exchange Server 2010 on Server 2008 R2. Following is the log file:
    Summary: 3 item(s). 1 succeeded, 1 failed.
    Elapsed time: 00:00:02
    Preparing Setup
    Completed
    Elapsed Time: 00:00:00
    Mailbox Role
    Failed
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Error:
    The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
    (join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
    } Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
    -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
    /t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
    -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
    /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
    nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
    /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
    Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
    was run: "Process execution failed with exit code 1.".
    Process execution failed with exit code 1.
    Elapsed Time: 00:00:02
    Finalizing Setup
    Cancelled

    Hi,
    Please make sure the account has required permissions: Schema Admins, Domain Admins, Enterprise Admins, and Organization Management.
    And please check if you have meet the prerequisites for Exchange 2010 installation.
    Exchange 2010 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354(v=exchg.141).aspx
    In addition to the prerequisites, we also need to prepare AD and domain for Exchange 2010.
    Prepare Active Directory and Domains
    http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
    To narrow down the issue, I recommend you check the setup log to see if there is any clues.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Exchange Server 2010 EMC Error

    Hi, I have installed Exchange Server 2010 SP3 in Windows Server 2012 Domain Controller. After the successful installation, I am not able to view the options in the Exchange Management Console. It gives the error "The WinRM client cannot process the
    request. It Cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid."
    Can anyone help on this issue to solve this. Thanks in advance.
    Regards
    Babu

    Hi
    Installing exchange 2010 or any version on a domain controller is not recommended.
    Please check that all the IIS App pools are started, the relevant services are started etc. Is this in a production environment?

  • Exchange Server 2010 get error HResult = -2147024891 when Accessing Virtual Directories on CAS

    I've just installed a Exchange 2010 server in an Exchange 2007 server environment.
    The 2007 enviroment include two exchange server "Server-A" and "Server-B"
    and "Server B" has dead on hardware issue for half year.
    When I go to Microsoft Exchange On-Premises -> ServerConfiguration -> Client Access and receive the following error message
    An IIS directory entry couldn't be created. The error message is Access is denied. . HResult = -2147024891 It was running the command 'Get-OabVirtualDirectory'
    I try run the “Get-OwaVirtualDirectory” in powershell and get following result
    From the power Shell command prompt .. Run
    [PS] C:\Windows\system32>Get-OwaVirtualDirectory
    An IIS directory entry couldn’t be created. The error message is Access is denied.
    . HResult = -2147024891
    + CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
    , IISGeneralCOMException
    + FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
    I've google that i need to add "Exchange Trusted Subsystem" as a member in local admin group in Exchange 2007
    but my exchange 2007 "Server-B" already dead, how should i fix it?
    Appreciate for any help!!

     re-create the new virtual directories does not work for me.
    still got the error
    An IIS directory entry
    couldn’t be created. The error message is Access is denied.
    . HResult = -2147024891
    + CategoryInfo : NotInstalled: (<Server-B\Exchange (Default Web Site):ADObjectId) [Get-OwaVirtualDirectory]
    , IISGeneralCOMException
    + FullyQualifiedErrorId : 4B12EB5D,Microsoft.Exchange.Management.SystemConfigurationTasks.GetOwaVirtualDirectory
    I don't understand why change new exchange server 2010 setting require me to have permission to access
    my dead exchange server 2007

  • Exchange Server 2013 Installation error

    Hi Support,
    I have try to install exchange server 2013 on server 2012. after configure active directory when try to install exchange server command Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    Microsoft Windows [Version 6.2.9200]
    (c) 2012 Microsoft Corporation. All rights reserved.
    C:\Windows\system32>CD\
    C:\>E:
    E:\>cd pradeep\Ex Setup 2013
    E:\pradeep\EX Setup 2013>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseT
    erms
    Welcome to Microsoft Exchange Server 2013 Unattended Setup
    Copying Files...
    File copy complete. Setup will now collect additional information needed for
    installation.
    Performing Microsoft Exchange Server Prerequisite Check
        Prerequisite Analysis                                     FAILED
         A reboot from a previous installation is pending. Please restart the system
     and then rerun Setup.
         For more information, visit: http://technet.microsoft.com/library(EXCHG.150
    )/ms.exch.setupreadiness.RebootPending.aspx
    The Exchange Server setup operation didn't complete. More details can be found
    in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    E:\pradeep\EX Setup 2013>

    Hi ,
    Please have a look in to the error message 
      "A reboot from a previous installation is pending. Please restart the system
     and then rerun Setup."
    Reboot the server and try again .
    Please reply me if you have any queries .
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

  • Exchange Server 2013 installation error at Step 10/15

    I try to install Exchange Server 2013 on a fresh install of Windows Server 2012.
    Windows Server 2012, have already install on it:
    AD CD
    DNS
    IIS
    Exchange 2013 Prerequisites for Win.Server 2012 like described here
    http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
    And the (winner) error message is:
    Exchange Server component Mailbox role: Client Access service failed.
    Error: Error:
    The following error was generated when "$error.Clear();
    Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
              if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
                Install-AuthCertificate -DomainController $RoleDomainController
            " was run: "Could not grant Network Service access to the certificate with thumbprint ABC7C6378BF63CED166794CFBF410C73B29EDD3A because a cryptographic exception was thrown.".
    I search online for a solution and I found many others with same problem but any solution yet. :(
    If anyone can help me I am able to dedicate him my next ode.
    Thank you,
    Adrian

    I am experiencing the same problem except that mine is definitely NOT a domain controller.  The error code indicates that the process is attempting to grant Network Access to the Certificate during Setup, but fails.
    "...Could not grant Network Service access to the certificate"
    Exchange 2013 is being installed on Windows Server 2012 R2 but it is a member server with no domain responsibilities.  Granting rights to the certificate during the Setup process is the root of the problem.
    Here is the complete error comment:
    The following error was generated when "$error.Clear();
              Install-ExchangeCertificate -WebSiteName "Exchange Back End" -services "IIS, POP, IMAP" -DomainController $RoleDomainController -InstallInTrustedRootCAIfSelfSigned $true
              if ($RoleIsDatacenter -ne $true -And $RoleIsPartnerHosted -ne $true)
                Install-AuthCertificate -DomainController $RoleDomainController
            " was run: "Could not grant Network Service access to the certificate with thumbprint 681FC4E2C66D726EFB91A8E0FF7FF6F98942C2F4 because a cryptographic exception was thrown.".

  • Windows Exchange Server 2010

    After installation of Windows 2010 server.
    can any one tell me...what are the next steps to work with Exchange Server 2010 ?
    [email protected]

    Hello friend,
    first of all there is no version on windows server named "windows 2010 server"!!!!!
    To install exchange server 2010, you can either install windows server 2008 standard/enterprise SP2 or windows server 2008 standard/enterprise R2 (actually its better to install w2k8 standard/enterprise R2 release to make the installation of exchange server
    2010 easier). The server on which exchange will be installed should be part of a domain because exchange server works along with active directory
    Here are the steps to follow for a successful exchange server 2010 installation:
    Hardware requirements
    -x64 architecture (Intel or AMD64)
    -Quad core processor (minimum)
    -8 GB RAM (minimum) if you want to combine the roles on one server
    -2 GB HDD minimum
    Software requirements
    -w2k8 enterprise/standard R2 or w2k8 enterprise/standard service pack 2
    -exchange server 2010 software
    *Prerequisites for server 2008 standard/enterprise SP2
    -Install the Microsoft.NET framework 3.5 SP1
    -Install the .NET Framework 3.5 Family Update
    -Install Windows Remote Management 2.0
    -Install Powershell v2
    -On Hub Transport & Mail Box servers install the Microsoft Filter Pack
    -On Unified messaging server install server manager desktop experience
    *Prerequisites for server 2008 standard/enterprise R2
    -Install the Microsoft Filter Pack on Hub Transport and Mail Box server
    -From PowerShell, type "Import-Module ServerManager"
    -Use the Add-WindowsFeature cmdlet to type:
        Add-WindowsFeature NET-Framework, RSAT-ADDS, Web-Server, Web-Basic-Auth,
        Web-Windows-Auth, Web-Metabase, Web-Net-Ext, Web-Lgcy-Mgmt-Console, WAS-Process-Model,
        RSAT-Web-Server, Web-ISAPI-Ext, Web-Digest-Auth, Web-Dyn-Compression, NET-HTTP-Activation,
    RPC-Over-HTTP-Proxy, Desktop-Experience-Restart
    Note: If you are not using the Unified Messaging role you can remove Desktop Experience
    After restarting, configure the TCP Port service to start automatically using: "Set-Service NetTcpPortSharing-StartupType Automatic".
    Put the user account from which you performed the installation in the "Organization Management" group

  • Exchange Server 2010 SP3 Installation with UM Language Pack Error

    Hi All,
    Kindly help me in this issue, When I Install Exchange Server 2010 SP3, I faced an error in UM role setup as the below,
    and when i searched on it i found solution like "Download the UM language packs and tried to install directly" so i downloaded "UMLanguagePack.en-US" from the below URL:
    http://www.microsoft.com/en-eg/download/details.aspx?id=36769
    and when i tried to install it, i faced the below error:
    also i searched on this error and i found solution in registry as the below:
    Try remove registry key for the above error :
    "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange\<Your Version >\UnifiedMessagingRole\LanguagePacks"
    and after i did it, i found first error be solved and the second error still the same as the below:
    Error:
    A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just
    this role, or remove the role using Control Panel.
    Is there a solution on this issue please i wanna solve it As soon as possible?
    Thanks in advance,

    I solved the below error by editing in registry:
    Error:
    A Setup failure previously occurred while installing the UnifiedMessaging role. Either run Setup again for just this role, or remove the role using Control Panel.
    Solution:
    Open regedit (Start -> run), navigate to the following key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14
    Under each role, UnifiedMessagingRole, have a look for an action and watermark entry, Delete these 2 keys, and retry. it solve this error, and You can now run the installation again of your "UMLanguagePack.en-US". and its done and installed now.
    After "UMLanguagePack.en-US" Installation, i tried to continue installation of Exchange Server 2010 SP3, but I faced the same first error in UM role setup as the below,
    What can i Do? please help urgently.

  • Exchange Server 2010 Mailbox Role Installation Problem

    I got  Error in Install Software Exchange Server 2010 64 bit. Which I am Given Below.
    1. Active Directory Does not exist and can't be Concatenated.
    2. This System Has no Domain.
    please help me regarding install Software and please give  any solution.
    How to Install.

    Hi,
    We can't install the actual Exchange server role on Windows 7, we can install the Management Tools on it. For more information about this, please see the "Supported operating system platforms" section in the following article.
    http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
    Do you want to install Exchange 2010 Management Tools on Windows 7 64-bit?
    If so, please make sure you meet the Exchange 2010 system requirements.
    You can refer to the following article to install the Exchange 2010 Management Tools.
    http://exchangeserverpro.com/exchange-2010-install-management-tools/
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • SBS 2003 to 2011 Migration - Exchange Server 2010 cannot be installed

    Hello,
    We have a Small Business Server 2003 server that we are trying to migrate to SBS 2011 using the out of the box migration process. After the install, the SBS console showed a couple installation issues - the big one turned out to be "Exchange Server
    2010 cannot be installed".
    Here is the end of 'ExchangeSetup.log' showing various error messages:
    [11/29/2014 23:00:07.0489] [2] Active Directory session settings for 'Get-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
    [11/29/2014 23:00:07.0490] [2] Beginning processing get-exchangeserver -Identity:'MB-MAINSERVER04' -DomainController:'MB-MAINSERVER04.Contoso.local' -ErrorAction:'SilentlyContinue'
    [11/29/2014 23:00:07.0506] [2] Searching objects "MB-MAINSERVER04" of type "Server" under the root "$null".
    [11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
    [11/29/2014 23:00:07.0518] [2] Previous operation run on domain controller 'MB-MAINSERVER04.Contoso.local'.
    [11/29/2014 23:00:07.0518] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
    [11/29/2014 23:00:07.0522] [2] Unexpected Error
    [11/29/2014 23:00:07.0522] [2] The operation couldn't be performed because object 'MB-MAINSERVER04' couldn't be found on 'MB-MAINSERVER04.Contoso.local'.
    [11/29/2014 23:00:07.0523] [2] Ending processing get-exchangeserver
    [11/29/2014 23:00:07.0523] [1] Executing:
    if ($server -eq $null)
    new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
    [11/29/2014 23:00:07.0545] [2] Active Directory session settings for 'New-ExchangeServer' are: View Entire Forest: 'True', Configuration Domain Controller: 'MB-MAINSERVER04.Contoso.local', Preferred Global Catalog: 'MB-MAINSERVER04.Contoso.local', Preferred Domain Controllers: '{ MB-MAINSERVER04.Contoso.local }'
    [11/29/2014 23:00:07.0545] [2] Beginning processing new-exchangeserver -DomainController:'MB-MAINSERVER04.Contoso.local' -Name:'MB-MAINSERVER04'
    [11/29/2014 23:00:07.0599] [2] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
    [11/29/2014 23:00:07.0600] [2] Ending processing new-exchangeserver
    [11/29/2014 23:00:07.0607] [1] The following 1 error(s) occurred during task execution:
    [11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
    [11/29/2014 23:00:07.0607] [1] 0. ErrorRecord: Microsoft.Exchange.Data.Directory.SystemConfiguration.DefaultAdministrativeGroupNotFoundException: Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
    at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroup()
    at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetAdministrativeGroupId()
    at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeServer.PrepareDataObject()
    at Microsoft.Exchange.Configuration.Tasks.SetTaskBase`1.InternalValidate()
    at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
    [11/29/2014 23:00:07.0609] [1] [ERROR] The following error was generated when "$error.Clear();
    if ($server -eq $null)
    new-exchangeserver -DomainController $RoleDomainController -Name $RoleNetBIOSName
    " was run: "Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.".
    [11/29/2014 23:00:07.0609] [1] [ERROR] Could not find the default Administrative Group 'Exchange Administrative Group (FYDIBOHF23SPDLT)'.
    [11/29/2014 23:00:07.0609] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___84489810458648f5ac6e47811394a284 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [11/29/2014 23:00:07.0610] [1] Setup is stopping now because of one or more critical errors.
    [11/29/2014 23:00:07.0610] [1] Finished executing component tasks.
    [11/29/2014 23:00:07.0618] [1] Ending processing Install-BridgeheadRole
    [11/29/2014 23:00:07.0626] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    [11/29/2014 23:00:07.0633] [0] End of Setup
    [11/29/2014 23:00:07.0633] [0] **********************************************
    [11/29/2014 23:39:03.0429] [0] **********************************************
    [11/29/2014 23:39:03.0435] [0] Starting Microsoft Exchange Server 2010 Setup
    [11/29/2014 23:39:03.0435] [0] **********************************************
    [11/29/2014 23:39:03.0456] [0] Local Time Zone: (UTC-08:00) Pacific Time (US & Canada).
    [11/29/2014 23:39:03.0457] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
    [11/29/2014 23:39:03.0469] [0] Setup version: 14.1.438.0.
    [11/29/2014 23:39:03.0473] [0] Logged on user: Contoso2K3\Administrator.
    [11/29/2014 23:39:06.0763] [0] Command Line Parameter Name='mode', Value='Install'.
    [11/29/2014 23:39:06.0776] [0] ExSetupUI was started with the following command: '-mode:install'.
    [11/29/2014 23:39:07.0413] [0] Setup is choosing the domain controller to use
    [11/29/2014 23:39:07.0730] [0] Setup is choosing a local domain controller...
    [11/29/2014 23:39:08.0459] [0] Setup has chosen the local domain controller MB-MAINSERVER04.Contoso.local for initial queries
    [11/29/2014 23:39:08.0747] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use MB-MAINSERVER04.Contoso.local
    [11/29/2014 23:39:08.0748] [0] Setup is choosing a global catalog...
    [11/29/2014 23:39:08.0758] [0] Setup has chosen the global catalog server MB-MAINSERVER04.Contoso.local.
    [11/29/2014 23:39:08.0819] [0] Setup will use the domain controller 'MB-MAINSERVER04.Contoso.local'.
    [11/29/2014 23:39:08.0820] [0] Setup will use the global catalog 'MB-MAINSERVER04.Contoso.local'.
    [11/29/2014 23:39:08.0823] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
    [11/29/2014 23:39:08.0830] [0] Exchange organization container for the organization is 'CN=Contoso2K3,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=Contoso,DC=local'.
    [11/29/2014 23:39:08.0867] [0] Setup will search for an Exchange Server object for the local machine with name 'MB-MAINSERVER04'.
    [11/29/2014 23:39:08.0914] [0] No Exchange Server with identity 'MB-MAINSERVER04' was found.
    [11/29/2014 23:39:09.0061] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole
    [11/29/2014 23:39:09.0062] [0] The following datacenter roles are unpacked:
    [11/29/2014 23:39:09.0064] [0] The following roles are installed: AdminToolsRole
    [11/29/2014 23:39:09.0066] [0] The local server has some Exchange files installed.
    [11/29/2014 23:39:09.0320] [0] Setup will use the path 'C:\Program Files\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1' for installing Exchange.
    [11/29/2014 23:39:09.0332] [0] The installation mode is set to: 'Install'.
    [11/29/2014 23:39:13.0558] [0] An Exchange organization with name 'Contoso2K3' was found in this forest.
    [11/29/2014 23:39:13.0560] [0] Active Directory Initialization status : 'True'.
    [11/29/2014 23:39:13.0561] [0] Schema Update Required Status : 'False'.
    [11/29/2014 23:39:13.0562] [0] Organization Configuration Update Required Status : 'False'.
    [11/29/2014 23:39:13.0563] [0] Domain Configuration Update Required Status : 'False'.
    [11/29/2014 23:39:13.0564] [0] The locally installed version is 14.1.218.15.
    [11/29/2014 23:39:13.0565] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V14'.
    [11/29/2014 23:39:13.0920] [0] Applying default role selection state
    [11/29/2014 23:39:13.0961] [0] Setup is determining what organization-level operations to perform.
    [11/29/2014 23:39:13.0962] [0] Because the value was specified, setup is setting the argument OrganizationName to the value Contoso2K3.
    [11/29/2014 23:39:13.0963] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V14\'.
    [11/29/2014 23:39:13.0972] [0] InstallModeDataHandler has 0 DataHandlers
    [11/29/2014 23:39:13.0972] [0] RootDataHandler has 1 DataHandlers
    [11/29/2014 23:39:15.0491] [0] Setup encountered an exception when trying to access the setup state file: Could not find file 'C:\ExchangeSetupLogs\exchangeInstallState.xml'.
    [11/29/2014 23:39:26.0117] [0] End of Setup
    [11/29/2014 23:39:26.0117] [0] **********************************************
    I should add that the source server's AD configuration might not be perfect due to this being the second attempt at a SBS 2011 migration install.
    I'd be grateful for any help I can get on this as SBS migration has been plauged with multiple setbacks already. I really need to get this done! ;)
    Thanks,
    Voon

    Thank you Larry and Al for your replies.
    I used the 'official' migration
    guide plus this page (http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/)
    as my migration references. The SBS migration prep tool gave no errors on the source server when I ran it.
    I have a full system drive image plus a a system state backup from before migration. Though I am very loathed to rollback the migration and attempt a new one - again. I will do some searching to see if I can resolve the Exchange server problem and continue
    the migration/installation. If not, then its a system state restore for me. One of Al's links had a resource for doing a thorough check of AD - which something I'd run if I have to another migration attempt.
    I am also really tempted to open up a paid MS support ticket for them to help me fix this problem. :)

  • When sending e-mail messages to a mail-enabled public folder that have been replicated from old Exchange Server 2000/2003/2007, Exchange Server 2010 environment mails are rejected with NDR.

    Hi, I would like to share with you issue that I’ve solved regarding mail-enabled PF that migrated from Exchange 2000/2003/2007 to 2010, I’ve searched & contacted my MVP leader – there’s no official KB regarding this issue right
    now, so I’m posting here in order to share this among others.
    Note: There’s article(s) that talked about PF replication from Exch2000/2003/2007 to 2010 – this is the same issue as well.
    Symptoms
    E-mail messages that been sent to mail-enabled public folder in Exchange Server 2010 environment rejected with the following NDR:
    “#< #5.2.0 smtp;554 5.2.0 STOREDRV.Deliver.Exception:ObjectNotFoundException; Failed to process message due to a permanent exception with message The Active Directory user wasn’t found. ObjectNotFoundException: The Active Directory
    user wasn’t found.> #SMTP#”
    Sometimes Exchange Server 2010 is documented as well Event ID 1020 on the Event Viewer with this information:
    “Log Name: Application
    Source: MSExchange Store Driver
    Event ID: 1020
    Level: Error
    Description:
    The store driver couldn’t deliver the public folder replication message "Hierarchy ([email protected])" because the following error occurred: The Active Directory user wasn't found.”
    Cause
    In an environment where Microsoft Exchange Server 2000 or Microsoft Exchange Server 2003 previously existed, and all those servers have been removed, there is a chance that an Administrative Group (First Administrative Group or another custom Administrative
    Group) remains with a Servers container, but no servers inside it.
    During replication, when the Exchange 2010 Store Driver sees the empty Servers container in Active Directory, it's expecting a System Attendant object inside the container and when it is not found the error occurs.
    Resolution
    To work around the issue, delete the empty Servers container. This can't be done through Exchange System Manager. Use the ADSI Edit tool to remove it using the following steps:
    Warning If you use the ADSI Edit snap-in, the LDP utility, or any other LDAP version 3 client, and you incorrectly modify the attributes of Active Directory objects, you can cause serious problems. These problems may require you to reinstall Microsoft Windows
    2003 Server, Microsoft Windows Server 2008, Microsoft Exchange 2010 Server or both Windows and Exchange. Microsoft cannot guarantee that problems that occur if you incorrectly modify Active Directory object attributes can be solved. Modify these attributes
    at your own risk.
    1.      
    Start the ADSI Edit MMC Snap-in. Click Start, then
    Run, and type adsiedit.msc, and then click OK.
    2.      
    Connect & Expand the Configuration Container [YourServer.DNSDomainName.com], and then expand
    CN=Configuration,DC=DNSDomainName,DC=com.
    3.      
    Expand CN=Services, and then CN=Microsoft Exchange, and then expand
    CN=YourOrganizationName.
    4.      
    You will see an empty Administrative Group. Expand the
    CN=YourAdministrativeGroupName.
    5.      
    Expand CN=Servers.
    6.      
    Verify there are no server objects listed under the
    CN=Servers container.
    7.      
    Right click on the empty CN=Servers container and choose
    Delete.
    8.      
    Verify the modification, and try to send again the E-mail to the mail-enabled public folder.
    Applies to
    Exchange Server 2010, Standard Edition
    Exchange Server 2010, Enterprise Edition
    Netanel Ben-Shushan, MCSA/E, MCTS, MCITP, Windows Expert-IT Pro MVP. IT Consultant & Trainer | Website (Hebrew): http://www.ben-shushan.net | IT Services: http://www.ben-shushan.net/services | Weblog (Hebrew): http://blogs.microsoft.co.il/blogs/netanelb
    | E-mail: [email protected]

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • Problems installing Mailbox role on Exchange Server 2010 SP3

    I am in the process of installing Exchange Server 2010 SP3 on a Windows Server 2012 server in order to migrate our existing Exchange 2003 server. Everything went well with the installation process until I went to add the Mailbox server role, which is giving
    me the following error (from the log file):
    [05/03/2013 21:58:09.0090] [1] Executing: 
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
    [05/03/2013 21:58:09.0105] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'TAM-FS2.tacomaartmuseum.org', Preferred Global Catalog: 'TAM-FS2.tacomaartmuseum.org', Preferred Domain
    Controllers: '{ TAM-FS2.tacomaartmuseum.org }'
    [05/03/2013 21:58:09.0105] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
    [05/03/2013 21:58:09.0276] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" 
    [05/03/2013 21:58:09.0344] [2] Process standard output: 
    [05/03/2013 21:58:09.0344] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
    [05/03/2013 21:58:09.0347] [2] [ERROR] Unexpected Error
    [05/03/2013 21:58:09.0347] [2] [ERROR] Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0350] [2] Ending processing Start-SetupProcess
    [05/03/2013 21:58:09.0350] [1] The following 1 error(s) occurred during task execution:
    [05/03/2013 21:58:09.0350] [1] 0.  ErrorRecord: Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0350] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0351] [1] [ERROR] The following error was generated when "$error.Clear(); 
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
            " was run: "Process execution failed with exit code 87.".
    [05/03/2013 21:58:09.0351] [1] [ERROR] Process execution failed with exit code 87.
    [05/03/2013 21:58:09.0351] [1] [ERROR-REFERENCE] Id=MailboxComponent___13A8A6B7DE0A4fe3BEB5CB1D86105DA3 Component=EXCHANGE14:\Current\Release\PIM Storage\Content Indexing
    [05/03/2013 21:58:09.0351] [1] Setup is stopping now because of one or more critical errors.
    [05/03/2013 21:58:09.0351] [1] Finished executing component tasks.
    [05/03/2013 21:58:09.0393] [1] Ending processing Install-MailboxRole
    I've searched all over but can't seem to find any reference to "exit code 87" - does anyone have any ideas?
    Thanks,
    Matt

    Error 87 -with these details below - and a fix. The situation that got me here by the way was an incomplete install that was uninstalled, then installed again.
    [02/24/2014 06:49:06.0967] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'xxxxxxxxxxxxxxx', Preferred Global Catalog: 'xxxxxxxxxxxxxxxxxxxxxxxx', Preferred Domain Controllers:
    '{ xxxxxxxxxxxxxxxxxxxxxxx }'
    [02/24/2014 06:49:06.0967] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\system32\wevtutil.exe' -Args:'im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man" '
    [02/24/2014 06:49:06.0967] [2] Starting: C:\Windows\system32\wevtutil.exe with arguments: im "C:\Program Files\Microsoft\Exchange Server\V14\Scripts\TSCrimsonManifest.man"
    [02/24/2014 06:49:07.0592] [2] Process standard output:
    [02/24/2014 06:49:07.0592] [2] Process standard error: The value for channel property Type contains an invalid value. The parameter is incorrect.
    [02/24/2014 06:49:07.0592] [2] [ERROR] Unexpected Error
    [02/24/2014 06:49:07.0592] [2] [ERROR] Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0592] [2] Ending processing Start-SetupProcess
    [02/24/2014 06:49:07.0592] [1] The following 1 error(s) occurred during task execution:
    [02/24/2014 06:49:07.0592] [1] 0.  ErrorRecord: Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0592] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 87.
    [02/24/2014 06:49:07.0608] [1] [ERROR] The following error was generated when "$error.Clear();
              $wevtutil= join-path (join-path $env:SystemRoot system32) wevtutil.exe;
              $manifestPath = [System.IO.Path]::Combine($RoleInstallPath, "Scripts\TSCrimsonManifest.man");
              Start-SetupProcess -Name:"$wevtutil" -Args:"im `"$manifestPath`" "
            " was run: "Process execution failed with exit code 87.".
    [02/24/2014 06:49:07.0608] [1] [ERROR] Process execution failed with exit code 87.
    I found I could fix this by removing the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Microsoft-Exchange-Troubleshooters/Operational
    and everything underneath it.
    My guess is that wevtutil didn't like adding an event log where it already existed but was slightly different in setup (no idea how, exactly).
    After 24 hours I'll try post again - giving things time to make sure they are actually working.

  • Exchange Server 2010 with SP3 Management Tools

    Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
    DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
    The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site.  If you want to connect to Remote Powershell, this service must be running.  Make sure that the W3SVC is running on at least one Exchange server.
    Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
    Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
    Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?

    I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
    http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx

  • Installing Update Rollup 7 for Exchange Server 2010 SP3

    Hi,
    I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
    Thannks!
    Wave~Chaser

    Hi,
    When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
    The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
    be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
    and please find below event log:
    Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
    on turning on logging support.
    Can you please help me with this error.
    Thanks

Maybe you are looking for

  • The phone wont install update

    I have tried soft and hardreset but it wont reset my phone....i have downloaded preveiw for developers update and now the update is not installing...it only shows 2 gears rotatating for past 7 hours with no progress

  • Modifying existing recursive algorithm to an iterative version

    Hi, I find myself wanting to modify the algorithm below to an iterative version or possibly one thats tail recursive because I'm getting stack overflow errors with the input i present my program. Can someone help me break this down? I've tried severa

  • Do i need to set Resource Ref's in teh deploy tool for a CMP bean?

    Hi, I have a CMP bean which i have deployed, it doesnt work, in the server log shows the following. [#|2005-03-10T14:13:21.046+1030|WARNING|sun-appserver-pe8.1|javax.enterprise.system.container.ejb.entity.finder|_ThreadID=16;|JDO74004: Bean 'PersonEn

  • In CS3 i cant find my plug ins folder

    I downloaded the camera raw 4.1 update and per the instructions your supposed to drop the plug in at Library/Application Support/Adobe/Plug-Ins/CS3/File Formats . I followed that path but there is no folder titled "plug-ins" inside of the Adobe folde

  • Parallels Desktop v3.0 corrupts downloads on Mac Pro but not on MacBook Pro

    Parallels Desktop for Mac version 3.0 is corrupting downloads and updates on my Mac Pro, but not on my MacBook Pro. Symptoms include the message "The digital signature for this package is incorrect. The package may have been tampered with or corrupte