Exclamation point and short message transfer rejected

I recieved a short message with an exclamation point, which I googled to be "urgent message", when I tried to reply I got "short message transfer rejected".
I know that the person messaging me is trying to keep his number secret, which is why I was surprised that he even texted me, could it be because of any of his settings?

Simply try pulling out the battery and leaving it out for a couple minutes. Usually, that is the fix-all to glitches. If not, you should contact your wireless mobile provider and see if they can help you. Usually, they are very easy to get along with and want to help you. But I think the battery pulling out will help you. It's happened to me before and I had to do that.

Similar Messages

  • "Network out of order" and "Short message transfer rejected"

    Guys,
    I have a BB 9300 3G Curve and I have trouble sending SMS. This is a peculiar problem since I
    #1 am able to send an SMS problem free sometime
    #2 get an error message saying "Network out of order"
    #3 get an error message saying "Short message transfer rejected"
    Plus, this problem is not specific to a particular contact number. I get different messages (1,2,3 above) for the same number at different times. I have tried putting my SIM in a different handset and it works perfectly fine.
    Someone please HELP!

    Simply try pulling out the battery and leaving it out for a couple minutes. Usually, that is the fix-all to glitches. If not, you should contact your wireless mobile provider and see if they can help you. Usually, they are very easy to get along with and want to help you. But I think the battery pulling out will help you. It's happened to me before and I had to do that.

  • Short Message Transfer Rejected

    Why does my Blackberry not let me send messages to my dad? I can recieve , messages from him and phone him, but whenever I send a message to him, it comes up with a red 'X' and 'Short message transfer rejected'. 
    Why is this happening and how can I fix it? 

    Hi and Welcome to the Community!
    If, by "Short Message Transfer", you mean SMS, then please contact your mobile service provider for assistance...SMS is 100% a carrier-provided service, their is nothing in the BB-proprietary services that is involved.
    If, on the other hand, you meant some other messaging service, then please be explicit about what exactly that is.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Short Message Transfer Rejected for Bold 9780

    There is one person in my contacts that I cannot text. It always comes up with a red x and says "Short message transfer rejected". The person can still text me, though, and I have no trouble calling the number. It only happens with this contact.
    I have tried deleting the contact and re-adding, taking out the battery and sim card, but it doesn't work.
    Can anyone help? 
    Solved!
    Go to Solution.

    Hi fireflyfishing
    Make sure when you create the contact on your BlackBerry® smartphone, that their mobile number includes the area code.  Most providers require the area code is used when sending SMS messages.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • 'Short Message Transfer Rejected' Curve 3G (9300) Three UK

    Hi, 
    I recently purchased a Curve 3G (9300) on the Three UK network and when I tried to text Facebook or Twitter to activate my number on it it come up with 'Short Message Transfer Rejected' Is there any way to fix this? (Plz see screen munch link below)
    Thanks, 
    Jay
    http://s1086.photobucket.com/albums/j454/Jay_1496/?action=view&current=munch_2011_05_10_203342.jpg

    Facebook had asked me to send a single letter which is F to the number 32665 and Twitter had asked me to send the word Go to 86444

  • Short message transfer rejected message

    I keep getting this message when I try to send a text.  I'm not receiving texts either.  I did a battery pull a few times with no luck.   Anyone help?

    Can anyone help with this? I received and could send messaged to twitter UK number 86444, I went to Spain and everything stopped! I don't receive and cant send messages! Short message transfer rejected. I tried battery pull, Change smart dialing to unknown & UK but nothing seems to help.

  • "short message transfer rejected" when sending sms.

    Hello
    I recently moved back to Sweden from USA, while there I had a blackberry curve 8900 with Tmobile. Since I was moving and had proof, I broke from the contract and got an unlock pin for my phone so I could use it on any network. The phone was fine until I decided to plug the 8900 into the pc and upgrade the os to 5.xxxx or so. since then I've recieved that error message when trying to send sms. I would call my carrier but I'm in Sweden using pay as you go, so I'm not sure if I can do that.
    Any help would be appreciated.
    Thanks!

    Fair enough.  OS 5.x isn't very reliable on the 8900 - there are a ton of known bugs with the phone.  Its one of the reason RIM pushed it out only to carries demanding the software upgrade.
    If needed you can obtain earlier releases of the OS and downgrade - just remember to kill the vendor file.  On a flip-note, the Sweeden carrier won't know your outside Sweeden unless you tell them

  • Exclamation point and folder icon appears on iPod screen

    I have a 20g Ipod and I am having lots of problems. Whenver I press a button it shows the apple logo followed by an exclamation point and folder icon. It ends with sounds of a clicking or HD whirring. Also, when I plug it into the computer, itunes prompts me with a message saying "Itunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with Itunes". When I chose the option to restore it, it begins, but does not finish restoring it. It then gives me a message: "The Ipod "ipod" could not be restored. An unkown error occured (1418)". I also tried to restore by doing the following, but this failed as well:
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    Any suggestions would be greatly appreciated
    Thank You
      Windows XP  

    Check these out:
    iPod Folder with Exclamation Point After Disconnected From Computer
    iPod Folder with Exclamation Point After Turned On
    Good Thread About iPod Sad icon/Folder with Exclamation Point
    I hope this helps!

  • Ipod shows folder with exclamation point and computer won't recognize

    My ipod resets itself each time that I try to turn it on, and then flashes the folder with the exclamation point. I have tried to restore it and update software but the computer won't recognize it. A few days before it broke the ipod would skip through some songs that it was unable to play for some reason, and now it makes a clicking sound when trying to start up. Did it die, or is there a way to fix this?

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
    http://www.kokopellimusic.us/KM_instructions.htm
    Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

  • Exclamation point and folder and nothing else

    Hi... I have an older 20 g iPod. I dropped it (only 3 feet but hard surface) last week and after that it malfunctioned and then stopped functioning. I have tried the reset several times without success. My Mac does not recognize it either in the information about this Mac or the disk utility or the iPod updater. I would love to be able to revive it but had assuimed it dead. I can get an apple on the screen when I do a reset and the battery icon shows that it is charging ... and then the exclamation point with the folder comes up.
    Any thoughts would be more than appreciated. Kay

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“Partition Magic”.
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning ! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery replacement (with pictures)
    http://www.kokopellimusic.us/KM_instructions.htm
    Have I tried this myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

  • HT203167 most of my music has the exclamation point and won't allow me to place songs in a playlist on a new ipod...why?                                     ?

    Most of the songs in my iTunes library has been tagged with the exclamation point and will not allow me to place those songs on a new Nano iPod I bought...why?  This is music I have purchased in the past.

    See here: iTunes displays a -69 error when syncing iPod
    You can use the disk diagnostic tool built into the iPod's firmware to test the health of it's Hard Drive.  See this post from another forum member turingtest2 on how to do this as well as what the resulting numbers mean.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • An exclamation point and the battery icon??????????

    when i connected my ipod to computer.....it was showed the an exclamation point and the battery icon and i can't connect it either charge........if u know why........please help me...............

    See if anything on this page helps: "iPod shows a folder icon with exclamation point when you turn it on" http://docs.info.apple.com/article.html?artnum=61003

  • Just got a new iPad but can't get it to do the text messaging.  Every time I put in a "To" address it shows a red exclamation point and says the name/number is not registered.  How do I register the people I want to text?

    I just bought a new iPad and can't get the text messaging to work.  When I try to address the message a red exclamation point appears and says the person is not registered.  How do I register them?  They are already in my contacts list & they all are active in my iPhone text messaging.

    Please Get the iPad User Manual for iOS 5.

  • TS1424 downloaded an entire album and everything is fine on my iPod, but on the computer 7 tracks have an exclamation point and when I try to play those track I get a message that the original files are missing.

    Exlamation point on 7 tracks from an entire album, all the others are fine.  It won't play on the laptop, I get an error message that the original files are missing.  But they play fine on the iPod.

    Try deleting those missing tracks from your computer's iTunes, connect the iPad to your computer and do File > Transfer Purchases - that should copy them back from the iPod

  • Red square with circle, grey exclamation point AND iTunes won't sinc new songs?

    I have just upgraded my iPhone 4 to iOS 7.0.3 and for some reason my music on my phone will not play. Every song comes up with a red square with a red circle around it and simply will not play. Looking on iTunes now - every time I try to play a song a grey exclamation point with a grey circle pops up next to the song and again WILL NOT PLAY!
    I've heard that it iTunes might be having trouble finding the source of the song (which its never had trouble doing before) so I deleted one song and tried to replace it back on there only to find that it is now not sincing new songs either! This new song is very light grey in colour and has the spotted circle next to it.
    I don't even know where to start fixing these problems.
    Additional Information:
    I have my phone set up to Sinc only checked songs and videos.
    I drag and drop my songs into the 'On this iPhone' heading rather than sicing the whole thing as I share this computer with my brother.
    Am I going to have to downgrade my iOS back to what it was?
    I really hope someone out there can help!

    [[UPDATE]] SOLVED - I've restarted both my computer and my phone and tried to re-drop in that one song that was coming up light grey. It's now sinced and playing on Itunes and is the ONLY song on my phone. No more exclamation mark or red square.
    Looks like I'm going to have to delete all the songs and replace them into my itunes.
    *sigh*
    Thank you Apple for this smooth, easy going update. Much appreciated.

Maybe you are looking for

  • Using Sun 7110 in a Microsoft AD network

    I have a SUN 7110, I would like to use it as a file server in my Microsoft AD network. I have an old file server running on Windows 2003 server. I would like to move all files over to the 7110. If I choose to use CIFS is there a way for the 7110 to t

  • How to create formulas in an SQL statement

    Hello, I am trying to create a formula in an sql statement without creating a external function. Here is my example : select (x + y) as a, (x + y) + 2 from dual As you can see the formula "(X + Y)" is repeated. I would be glad to write a select state

  • Renaming folder resets NTFS permissions

    Hi I have installed a new file server, running Server 2012 R2. I have created a shared folder and set the NTFS permissions. I then renamed the folder and noticed that the NTFS permissions had ben removed and reset. I have never seen this behavior bef

  • App updates are frozen what do I do?

    I have app on my ipad 2 that need to update and are frozen. What do I do?

  • Database doen't connect on restart

    Hi All, I have 10g 10.1.0 installed....it was all working fine until I restarted the server when it prompted to restart after automatic update of windows server 2003. Now when I try to connect it gives error ORA-12505, I first stop and restarted the