Exclude a server from intersite transport?

Hello,
In a multi-site Exchange 2010 environment, our primary site still has a few older Exchange 2007 servers (needed to support an in-house app that uses Outlook 98 - don't ask). I'm in the process of replacing and consolidating the Windows 2003 Exchange 2007
servers down to one new VM running Windows 2008 R2 and Exchange 2007. The other two sites have nothing but Exchange 2010 servers.
Q: Is there a way to exclude the Exchange 2007 servers from intersite transport, and force the remote sites to only communicate with the Exchange 2010 servers in the primary site? I want to minimize the traffic using the Exchange 2007 servers, so I can more
easily determine if any of our application servers are still hitting the 2007 servers (and our load balancer, which I do not control or wish to modify, masks the IPs of the sending servers).
Thanks!

You can easily create a new AD site and populate it with individual IP addresses if you use a /32 CIDR.
For example, to put three machines into a different AD site:
1.2.3.4/32
1.2.3.5/32
1.2.3.6/32
--- Rich Matheisen MCSE&I, Exchange MVP

Similar Messages

Exclude a server from background processing of a job

I have a background job that runs slowly on only the Central Instance on the database server host. The 6 other application servers run the same job in half the time. How can I configure this job to run on all but one application server? Is there some kind of background group that can be designated? How can I change the background processing priorities?

Hi,
Set all btc jobs on CI to class A ? ( make sure you plan as B or C for this job)
This should handle your both questions:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ef/2c513897110872e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c4/3a7f53505211d189550000e829fbbd/frameset.htm
switch opmode temporary if needed:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c4/3a5f1f505211d189550000e829fbbd/frameset.htm

Product exclude from the transport lane

Hello experts,
We are using a transport lane with "all products" as we are having 300 products but we want to exclude 3 products from the lane.
We dont want to create for all 297 products, is it possible to exclude 3 products from the lane.
Regards,
mani

Hello Mani,
As other experts suggested, you can make use of "Block" setting in the Transportation Lane. You have two option either user Value - X (Locked) or use Value: D (Locked and Flagged for Deletion).
Besides, you can also make use of Start Date and End Date option to make this Tlane invalid for those 3 products.
Hope this will help.
Thank you
Satish Waghmare

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Facing error in starting managed server from nodemanager

Hi All,
I have installed WebLogic server 10.3.4 and installed OSB 11.1.1.4.0. I created domain with one admin server and one managed server for osb. When I started managed server with the startManagedWebLogic command it got started successfully but when I am trying tp start the managed server from nodemanager I am getting the following error
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
D:\JDK\JROCKI~1.0\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx512m -Dweblogic.Name=osb_server1 -Djava.security.policy=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=D:\Oracle_OSB\Middleware\user_projects\domains\osb_domain\servers\osb_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=D:\ORACLE~1\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1 -Djrockit.optfile=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\osb_server1 -Doracle.domain.config.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=D:\ORACLE~1\MIDDLE~1\USER_P~1\domains\OSB_DO~1\servers\osb_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\ORACLE~1\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dem.oracle.home=D:\Oracle_OSB\Middleware\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://soaspt-app01.scotwat.net:7010 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\ORACLE~1\MIDDLE~1\patch_wls1034\profiles\default\sysext_manifest_classpath;D:\ORACLE~1\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
[ERROR] aborted
JRockit aborted: Unknown error (50)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<11-Mar-2013 13:22:17> <FINEST> <NodeManager> <Waiting for the process to die: 5916>
<11-Mar-2013 13:22:17> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<11-Mar-2013 13:22:17> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
My nodemanager is started and reachable. The error above says "Address already in use" but I am able to start my managed server through startManagedWebLogic.cmd command.
Can anyone please tell me what could be the issue. It is really urgent. Please help!!

Hi Roshni,
It is likely that a configuration is missing or not set properly in the Node Manager properties file (nodemanager.properties) since the managed server can be started up using startManagedWebLogic.cmd but not with Node Manager. I would complete the following steps to fix the problem:
1. Go to %WLS_HOME%\common\nodemanager and open up nodemanager.properties (Make a backup of the file first). NOTE: WLS_HOME is your WebLogic Server home.
2. Look for the parameters "StartScriptEnabled" and "StopScriptEnabled". They should be set to true. If not, please set them to true.
3. Save and close the file.
4. Restart the Node Manager
If you are still unable to start the manager server using Node Manager, you may need to update the DEBUG_PORT parameter in setDomainEnv.cmd located in %MIDDLEWARE_HOME%\user_projects\domains\%DOMAIN_HOME%\bin (always make a backup before changing a configuration file). You may refer to Oracle Support note 1272642.1 for more information about the nodemanager.properties file and how to configure the DEBUG_PORT parameter in setDomainEnv.cmd if needed.
Thanks,
Scott (PITSS)
http://pitss.com/us

How to exclude tablespace UNDOTBS1 from backup in OEM

I use OEM to backup our database (11.2 on Redhat 2.6.18-92.el5 ). It take quite a bit time and disk space (32gb) to backup the UNDOTBS1 table space. I do not think that we need undo tablespace for a recovery. If this is correct how can I excludeit from the backup. OEM allow to exclude data tablespace from backup but not UNDOTBS1.
Thanks

To create a physical standby you need the entire database. Not just parts of it. The only thing at the standby system that will be different is the controlfile (it will be a standby controlfile) and the spfile. Everything else will be exactly the same. Locations of the files can differ of course if you set the appropriate parameters.
Please make sure you have read Chapter 3 "http://download.oracle.com/docs/cd/E11882_01/server.112/e10700/create_ps.htm#i63561" of the Data Guard Concepts and Administration manual.
You can use the RMAN qualifier FROM ACTIVE DATABASE to the DUPLICATE FOR STANDBY command to avoid the need for interim storage for the backup. That method streams the backup from the Primary directly into the standby server. Refer to Chapter 2 of our book "Oracle Data Guard 11g Handbook (http://www.amazon.com/Oracle-Guard-Handbook-Osborne-ORACLE/dp/0071621113)" for details.
Since you are using OEM, make sure you are using 10.2.0.4/5 Grid Control. The Data Guard standby creation wizard has a new option to use this RMAN option. It is the first selection on the type of backup page. (To get to the DG pages select your Primary database from the Database Targets page and then select the Availability tab, and then under Data Guard select the Add Standby Database link).
As for block change tracking, since we all thought you were just doing a backup and did not realize you were trying to create standby BCT can help make it faster. However it does not apply in this case.
Larry

Restart Managed Server from Adminserver FAILED_NOT_RESTARTABLE

Hi all,
I've got problems restarting the managed server from the adminkonsole ('Control'-Tab) and from within wlst while connected to the adminserver 'start('mymanaged','Server','t3://localhost:80', block='true') connected with the adminserver.
In the logfile of the administration occurs a nullPointerException:
java.lang.NullPointerException
     at javax.mail.internet.MimeUtility.decodeText(MimeUtility.java:480)
     at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.mimeDecode(DeploymentServiceServlet.java:788)
     at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.authenticateRequest(DeploymentServiceServlet.java:523)
     at weblogic.deploy.service.internal.transport.http.DeploymentServiceServlet.doPost(DeploymentServiceServlet.java:194)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:225)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:127)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3214)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1983)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1890)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1344)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
The nodemanager-log shows an IOException:
<02.02.2007 12:08:42> <Warning> <Exception while starting server 'sunetweb': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
     at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:246)
     at weblogic.nodemanager.server.Handler.handleStart(Handler.java:463)
     at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:115)
     at weblogic.nodemanager.server.Handler.run(Handler.java:66)
     at java.lang.Thread.run()V(Unknown Source)
In the console, the serverstate of the managed server is:
FAILED_NOT_RESTARTABLE
But in config.xml both servers have set auto-restart:true.
Starting from within wlst connected to Nodemanager instead works (nmStart("mymanaged", 'c:/win32app/bea/user_projects/domains/mydomain').
Also the serverstart with a command file works.
I want to restart the managed server from the console and from wlst connected to admin server.
What is wrong ?
Thanks, kind regards,
Thomas

Hi Jin,
I use wlst now to do what I want.
For a gentle restart of the managed server I connect to the Administration server and then run:
#shutdown mymanaged gently
shutdown(name='mymanaged',entityType='Server',ignoreSessions='true',timeOut=5, force='false')
#start the sever again
start('mymanaged','Server','t3://localhost:80', block='true')
Still it is not possible to restart the managed server from console (stopping works).
But wlst works for me.
I won't follow this problem further.
Thanks a lot.
Kind regards,
Thomas

How to execute a transaction code in prod.Server from development server

Hi Friends,
How to execute a transaction code in prod.Server from development server,Pls give me your valuable suggestions...
Regards,
V.Balaji

i have a program in production system if i type the request and execute its sends a mail to my admin saying to transport the request to production system.....thats y??????
just tell me ur idea.............

How to suppress compiler errors without excluding database objects from the "Schema Compare" tool (using VS2013/SSDT)

Hi,
In short: How to suppress compiler errors without excluding the object from the "Schema Compare" tool ??
A bit longer:
We have a SQL Server 2008 project in Visual Studio 2013 running SQL Server Data Tool.
An old database, with a lot of history in, has been imported into SSDT and there are many syntax errors preventing the project from compiling/running. An typical error is: "SQL70001: This statement is not recognized in this context".
Running the "faulty" scripts on the server, executes just fine. I understand that there are syntax errors and they should be rewritten, but it's not gonna happen just like that - it is a slow process over a long period of time.
I know it is possible to change Build Action to None, but that also exclude the object from appearing in the Schema Compare function/window.
So - how to ignore some compiler errors and still having the objects to appear when doing "Schema Compare" ??
Thank you in advance.

Hi Steven,
Thanks for your comments.
Well, it sure does help in the future, but right now i would prefer the other way - to suppress some errors and still allow the scripts to build.
The thing is that if we "rewrite" the objects into create scripts, then we have a huge test job ahead of us + the database environments (PROD vs DEV and UAT) does not share the same AD or DB users and therefore grants is lost if dropping/creating
objects, right!
If you drop a object before creating it, the drop will also drop the roles and grants and since they don't share user table, the create will not be able to add the permissions again. There might be a solution to that, but it is going to be very complicated
for some newbies like us. We need something we can trust.
BR
Peter

How to exclude some tables from schema level replicatio????

Hi,
I am working on oracle10g stream replication.
My replication type is "Schema Based".
So can anyone assist me to undersatnd, how to exclude some tables from schema based replication.
Thanks,
Faziarain

You can use rules and include them in the rule set, lets say you dont want LCR to be queued for table_1 in schema SALES, write two rules one for DDL and another for DML with NOT logical condition.
DBMS_RULE_ADM.CREATE_RULE(
rule_name => 'admin.SALES_not_TALBE_1_dml', condition => ' (:dml.get_object_owner() = ''SALES'' AND NOT ' ||
' :dml.get_object_name() = ''REGIONS'') AND ' ||
' :dml.is_null_tag() = ''Y'' ');
DBMS_RULE_ADM.CREATE_RULE(
rule_name => 'admin.hr_not_regions_dlll',
condition => ' (:dml.get_object_owner() = ''SALES'' AND NOT ' ||
' :ddl.get_object_name() = ''table_!'') AND ' ||
' :dsl.is_null_tag() = ''Y'' ');
just go through this document once, http://download.oracle.com/docs/cd/B28359_01/server.111/b28321/strms_rules.htm#i1017376
Edited by: user8710159 on Sep 16, 2009 5:21 PM

Exclude Stock Transfer from MRP Net Requirements

Hi,
Is it possible to exclude the Stock Transfer Orders from the Net Requirements generated by MRP? I want to base the requirements only from historical consumption. In my Stock/requirements list (MD04) for example, the Requisition generated by MRP increases in quantity since there are open Stock Transfers which are to be served by that plant to other plants.
Regards,
Lee

Nazrin,
Availability check configuration (OVZ9) has no impact on MRP. MRP relies on its internal rules when it is performing its net requirements calculation. You have very little control over which elements are included/excluded.
You can exclude selected storage locations from MRP planning. Stock and reservations against these storage locations will therefore also be excluded.
You can exclude a material from planning, change the material master MRP type to ND.
Your best bet, though, would be to set your PM planning process up such that these materials never create the reservation in the first place.
Regards,
DB49

Automatic reply from Hub Transport

Hi all
We have a Job mailbox in exchange 2010 in which job seeker sent email , I want to set automatic reply email to sender
"Email has been received"
Is there any way to do that from Hub Transport server
Regards

Hi,
We can login ECP and set autoreply rules as Marian said.
Alternatively, we can also depend on the following command:
Set-MailboxAutoReplyConfiguration [email protected] –AutoReplyState Scheduled –StartTime “9/8/2011” –EndTime “9/15/2011” –ExternalMessage “External OOF message here” –InternalMessage “Internal OOF message here”
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2011/09/08/configure-automatic-replies-for-a-user-in-exchange-2010.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

NX-OS - How include or exclude an OID from the SNMP view entry???

Hi, I'm working with Nexus 7010 - System version: 5.1(3).
For example, in the 7200 we can include or exclude an OID from the SNMP view entry using the command #snmp-server view.
How can we include or exclude an OID from the SNMP view entry in the Nexus 7010???
Thanks.

Greetings Marcelo,
SNMP views are not currently supported on NX-OS. You can use Role-based Access Control to restrict what SNMP users can manage which is somewhat limited in scope - mainly permit/deny read/write access to specific features.
Cheers,
/Phil

Error in starting server from NetWeaver Studio

I get the following error when i start the server from NetWeaver studio. Any reason why this error pops up.
Problem Occurred:
Startting Server - SAP Server E<24> (Time of error.....)
Reason :
JsfOpenAdmin failed: object not found.
However I can start and stop the server from the management console.
thanks,
Sahir
Edited by: Sahir Pathan on Jul 14, 2008 5:29 PM
Edited by: Sahir Pathan on Jul 14, 2008 5:37 PM

Maybe when you are on netweaver studio, the instance number passed is the java one instead of the abap instance one :
sidadm> sapcontrol -nr 01 -function J2EEGetProcessList
27.02.2009 17:13:02
J2EEGetProcessList
OK
telnetPort, name, pid, type, restart, exitCode, state, startTime, elapsedTime, restartCount, errorCount, cpu, debug
0, SDM, 11557, SDM Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:14:36, Switched off
50108, dispatcher, 11555, J2EE Dispatcher, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 0:24:21, Disabled
0, server0, 11556, J2EE Server, Yes, , J2EE_RUNNING, Running, 2009 02 01 06:41:40, 634:31:22, 0, 0, 1:16:31, Disabled
sidadm> sapcontrol -nr 11 -function J2EEGetProcessList
27.02.2009 17:13:17
J2EEGetProcessList
FAIL: JsfOpenAdmin failed: object not found
sidadm>

Photoshop CS6 can't save to server after upgrading to Mac OS Yosemite Server from Mac Lion Server

We recently upgraded our server from a Mac Pro 2008 with OS X Lion Server to a Mac Mini 2014 with LaCie 20TB 5Big Thunderbolt 2 RAID drive. Everything is working fine with the exception of Photoshop. It does it intermittently but once it happens it will continue to do so. We get message like "Can't save to disk because of disk error" and "Can't save file because of program error" . Sometime we are able to do a "save as" and save over it. Most of the time we have to "save as" with a different file name and then rename and recopy the file. We have check permission on all the file as well as the server HD has ignore ownership checked. Again only three things changed. 1) Sever hardware change from Mac Pro to Mac Mini. 2) Server software upgraded from 10.7 Lion to 10.10 Yosemite(both have the latest update). 3) Drive when from internal on Mac Pro to External Thunderbolt 2 LaCie drive. We have no problem with Illustrator or Indesign. Only Photoshop. Anyone with any suggestion is greatly appreciated.

Unfortunately you seem to be using Photoshop in a way that Adobe discourages, so you may not be getting a lot of helpful advice.
Networks, removable media | Photoshop | CS4 and later

Exclude a server from intersite transport?

Similar Messages

Maybe you are looking for