Exclude all characteristic values

In 0SD_C03 infocube, i have io 0SOLD_TO (customer) and 0MATERIAL, wich is the material buyed by customer.
In BEx, i want make a query excluding customers that have bought a fixed material. The problem is usually customers buy many diferents materials, and when i filter by the material i want, the system only filter the information about this material, but not the customer himself.
Some idea?
Thanks in advance,
Ángel.

Thanks for your help.
Well, i have the 0SD_C03 standard infocube with bill item level and others not important modifications.
The important characteristics are 0Material and 0Sold_to (0Customer) and key figure net value. You have a register in the ic for each bill item, so you don´t have phisyc aggregation at 0Material level. This means i have a register in the ic for 0Material M0001 and other for M0002, because they come from diferents bill items.
In the query, i only need the customers, but i need the 0Material as filter characteristic.
Thanks in advance,
Ángel.

Similar Messages

  • Demand Planning - No authorization for all characteristic values selected

    Hello All,
    I am trying to load the data and it is giving error "You do not have authorization for all the characteristic
    values selected".  I can access the data in sandbox but not in Development. SU53 of both are same.
    Also the roles are same in both the system.  /sapapo/mc77 - maintain selection assignments is also same in both the systems.
    Thank you for the help.
    Regards
    Pratap

    Hi,
    This is a case of inadequate authorization for display or execution of demand planning.
    I don't understand what you exactly mean by
    "su53 of both are same".
    SU53 gives you a list of the authorization check that the system last executed on the ID.
    Here r some suggestions. do an su53 immediately after the authorization error message is flashed.
    It shall give you the authorization object which is required for that activity that you were attempting.
    Also it suggested the name of role/s which have the required authorization object already present.
    It is possible that you might have ALL authorizations in dev system, but the quality and production systems are usually the area where selective authorizations are to be used.
    Hence the basis team might not have given you all the authorizations in the higher system where you are facing the above issue.
    Hope this helps
    Regards

  • Showing all Characteristic values from Master Data in WebI report

    I want to show master data when there is no data in Cube, I have created constant variable with 1 value in Bex and I am using that in the crystal report but it's still not showing master data. Can anybody help me on this.
    Thanks,
    Ravi

    Hi Ingo,
    Thanks for your quick reply, I have created formula with constant value 1. Do I need to put that formula in rows or columns or as Free Char?
    Thanks,
    Ravi

  • Retireve Characteristic values that are assigned to a grid

    Hi All,
    Am creating a query to display all characteristic values that are assigned to an AFS Grid. The selection criteria is the AFS Grid which will return the characteristic values. I used the tables J-3APGHD - AFS Product Grid entries and CAWN - Characteristic values for this purpose. However I am unable to join these two tables. Is there any other way to do it or an interim table that would help me link the above two tables. Thanks i advance.
    regards,
    Imran

    Hi,
    Could you tell me how did you solve this problem, please?
    (Query between J_3APGHD and CAWN)
    Thanks

  • Characterist Value Propagation on Multi-Level

    Hello All.
    I need restrict a characteristic propagation on my multi-level scenary.
    Anyone knows how do that?
    In ECC works fine.
    Version:
    ECC 6.0
    SCM 5.0
    Best Regards
    Marcelo

    More Information..
    The hierarchy is:
    Finished Product > P1 -> P2 -> P3 - > Raw Material.
    There is a PlOrd(R) in P3 material of 4500kg. But This order was created in  ECC6. When CIF creates the order, only 2 characteristics values was migrated. This is correct!!!.
    Well, when i run MRP all characteristic value from the finished product migrated to lower level. Characteristics like packing.
    The dependent demand of lower lever have 4 characteristics from Finished Product.
    SCM see the PlOrd(R), but because this order has only 2 characteristics and depend demand has 4. SCM creates another PlOrder ie Surplus.
    This is why i need to restrict the propagation of the characteristics.
    Thank you and best regards.
    Edited by: Marcelo Kayro Quintão on Mar 11, 2011 12:49 PM

  • All Dates displayed for "Characteristic Values" in Query Designer

    Hello Experts,
    We are on BI 7.0, level 13.  I am having an issue within the Query Designer with regards to dates.  I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3).  Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE. 
    When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field.  The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
    For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
    ZDATE2 only has 1 value posted in the DSO (01/01/2006).
    ZDATE3 only has 1 value posted in the DSO (01/01/2007).
    Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field.  I would expect to only see the 1 value posted for the InfoObject in the DSO.  Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
    It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO.  If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE.  Anyone encounter this before?  How can I get the Characteristic Values list to only show posted values for that InfObject?
    Thanks for your help!
    J

    Thanks for the response.  I went into the DSO and right clicked on each of the Date fields.  I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
    Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query?  Thanks!

  • Excluding characteristic values dynamically during runtime

    Hi guys, I need to do the following for a report I'm trying to create:
    I have the following Key Figures:
    "<= 10 days"
    "> 10 days"
    I am trying to drilldown by a characteristic value such as Material.
    So, for the first Key Figure (<= 10 days), I may get:
    Material 1
    Material 2
    Material 3
    For the second Key Figure (> 10 days), I may get:
    Material 3
    Material 4
    Material 5
    What I want to do here, is to exclude the values under Key Figure "<= 10 days", from being repeated in the Key Figure "> 10 days".
    So I want it like this:
    Material    <=10days      >10days
    Material1         1                     0
    Material2         1                     0
    Material3         1                     0* <----- I want this to be excluded in the 2nd Key Figure
    Material4         0                     1
    Material5         0                     1
    Does anyone have any idea how to go about doing this?
    Edited by: Hskok on Aug 6, 2010 8:58 AM

    Hi Rakesh,
    In more specific terms, the key figures are actually restricted by a date range, e.g., 08.2010 and 07.2010
    The value can belong to both dates in this case, such as:
    Material 07.2010 08.2010
    Material3 1 1
    What I need is to show the material only in the most recent bucket.
    In other words, if the material has appeared in the key figure containing 08.2010, I want to exclude this material from displaying in the key figure in 07.2010.
    Does that make sense?

  • Performance - Conversion of characteristic values to SID

    Greetings:
    Yesterday I load 556.000 record into an infocube.
    No transformations of any kind. Direct assign for every infoobject. Very simple
    It lasted 1 h 30m to complete the loading.
    It started loading  7 datapackage of 50.000 records each.
    I realized that 3 of those datapackage (#2, #4 and #7) lasted from 41:47min to 41:59min in the "Conversion of characteristic values to SID" task. The other 5 lasted ... seconds.
    Any idea of that could be going on during this conversion?
    I don't understant why some datapackages last so long and other don't.
    Does anybody has any idea about this?
    Thanks in regards.
    Guillermo

    Hi Daniel,
    The SID generation is based upon the Dimension Table and Master data.
    If you see the dimension table can be build with different types like:
    one to many
    many to one
    many to many
    one to one
    So, if the dimension's for that datapacket data is many to many then it has to get all the relations and then it has to assign an SID.
    If it is one to one then there will be no more work to be done by the system to assign the SID's
    Hope you understood the back-end process.
    With Regards,
    Ravi Kanth.

  • Slow dataload into Infocube- Conversion of Characteristic values to SIDs

    Hi All,
    we are facing a slow delta load issue when loading from a DSO into an InfoCube ( approx 150,000 recs).
    After checking the monitor found that
    - The Conversion of Characteristic values to SIDs is taking time
    - The Start Routine time is real quick ( in secs)
    The underlying DSO is hugh and there is no SIDs Generation upon Activation flag set for it
    Master data is loaded first and than we are loading the transaction data.
    i've tried refreshing the stats of the Cube, Reduce the size of the data package,
    Deletion of Indexes than Loading and recreation of Indexes, no joy at all.
    Any comments and recommendations are much appreciated.
    Thanks,
    Natalie

    Hi Natalie,
    The problem for your slow delta load from DSO to cube is because the SIDs Generation upon Activation flag is unchecked at DSO level .
    Becasue of which your activation is faster but your loading from DSO to cube will be slower as you only mentioned that SIDs are being generated .
    One recommendation will be to switch on the property of the DSO SIDs Generation upon Activation flag .
    Are there any secondary indexes also in DSO ?
    You can try deleting them also during loading the data from DSO to cube .
    I guess your change log table is also huge in this case . If possible we can think of deleting the log table also . Then for the new records let it get filled .
    Hope the above reply was helpful.
    Regards,
    Ashutosh Singh .
    Edited by: DEADLOCKS on Apr 21, 2011 5:08 PM

  • Conversion of Characteristic Values to SIDs. Load Very slow

    Hi Experts,
                     We have a slow load issue when loading from a Write-Optimized DSO into an InfoCube. 8 millon recs in 10 hours.
    We check the start, end, and rules routines and every is ok but for all the package the load was very slow in the Conversion of Characteristic Values to SIDs.
    Can any help me with this?
    Thanks a lot,
    Alejandro

    Hi,
    It is because the SIDs Generation upon Activation flag is unchecked at DSO level .
    One recommendation will be to switch on the property of the DSO SIDs Generation upon Activation flag .
    Are there any secondary indexes also in DSO ?
    You can try deleting them also during loading the data from DSO to cube .
    Also load your master data first and activate it before loading it to cube.
    Thanks,

  • BI-IP change characteristic value in FOX

    Hello Guys,
    i want to change the characteristic value in FOX.
    Therefore the FOX runs through all char combinations to identify the highest
    number for the char test.
    This step works fine, but i cant write the value for maxloop in the cube.
    If i try, only the old row is deleted, but i dont get a new row with the calculated value for maxloop.
    the code looks like this:
    DATA LOOP TYPE test.
    DATA MINLOOP TYPE test.
    DATA MAXLOOP TYPE test.
    MINLOOP = 00000.
    MAXLOOP = 00000.
    FOREACH LOOP.
    MINLOOP = LOOP.
    IF MINLOOP > MAXLOOP.
    MAXLOOP = MINLOOP.
    ENDIF.
    ENDFOR.
    MAXLOOP = MAXLOOP + 00001.
    {Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
    {Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
    Any suggestions what is wrong here?
    Regards
    T. Mekler

    Hi,
    You have written
    {Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
    {Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
    But as per the statement  MAXLOOP = MAXLOOP + 00001 the MAXLOOP conatins a new figure. Obviously there will not be any record in the cube for this value of MAXLOOP.
    You are assigning this to the record with MAXLOOP = 00200, so system is assigning zero to  0AMOUNT for the record that is having MAXLOOP=00200 value.
    Make the below corrections and test again:
    DATA NEWLOOP type test.
    NEWLOOP = MAXLOOP + 00001.
    {Amount, EUR, #, #, NEWLOOP, 00000000, #, 2007, #, #, #, #, #, #, #} =
    {Amount, EUR, #, #, MAXLOOP, 00000000, #, 2007, #, #, #, #, #, #, #}.
    Regards,
    Deepti

  • How To get Characteristic values for an Equipment in a particular Class ?

    Hi All,
    How i will get  Characteristic values for an Equipment in a particular Class ?
    Any table or FM ?
    Thanks in advance
    Srikanta Gope

    Hi,
    You can use the FM BAPI_OBJCL_GETDETAIL to fetch the characteristic values for an equipment from the table parameters ALLOCVALUESNUM; ALLOCVALUESCHAR; ALLOCVALUESCURR.
    Or u can use the tables EQUI, KLAH, KSSK, AUSP, CABN
    Regards,
    Aditya

  • How to get Characteristic Values assigned to the line item of Sales Order?

    Hi,
    I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
    I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
    this fn. mod. giving all the Characters but not the assigned characteristic values.
    Is there any other way to find characteristic values of sales order.
    Thanks,
    vinayak.
    Message was edited by: vinayaga sundaram

    For example, please see this example program.
    It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
    report zrich_0001.
    * Internal Table for Characteristic Data
    data: begin of i_char occurs 0.
            include structure comw.
    data: end of i_char.
    data: xcabn type cabn.
    data: begin of xcawn,
          atwtb type cawnt-atwtb,
          end of xcawn.
    data: xvbap type vbap.
    parameters: p_vbeln type vbap-vbeln,
                p_posnr type vbap-posnr.
    start-of-selection.
      select single * from vbap into xvbap
                 where vbeln = p_vbeln
                   and posnr = p_posnr.
      clear i_char.  refresh i_char.
    * Retrieve Characteristics.
      call function 'CUD0_GET_VAL_FROM_INSTANCE'
           exporting
                instance           = xvbap-cuobj
           tables
                attributes         = i_char
           exceptions
                instance_not_found = 1.
      loop at i_char.
        clear xcabn.
        select single * from cabn into xcabn
                 where atinn = i_char-atinn.
        clear xcawn.
        select single cawnt~atwtb into xcawn
                   from cawn
                     inner join cawnt
                       on cawn~atinn = cawnt~atinn
                      and cawn~atzhl = cawnt~atzhl
                          where cawn~atinn = i_char-atinn
                            and cawn~atwrt = i_char-atwrt.
        write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
      endloop.
    Regards,
    RIch Heilman

  • Hi. i used Function module to change Characteristic values of a sales order

    hi. i used Function module to change Characteristic values of a sales order..
    but sales order's Characteristic values didn't change.
    And the Function module doesn't occur any log message.
    please tell me wrong code, and how to solve this problem.
    if i have wrong method, what data can i pass to change the characteristic values
    DATA: LT_E1CUVAL    TYPE TABLE OF E1CUVAL.
      DATA: WA_E1CUVAL    TYPE E1CUVAL.
      DATA: LS_CFG_HEAD   LIKE CUXT_CUCFG_S,
            LS_INSTANCES  LIKE CUXT_CUINS_S,
            LS_VALUES     LIKE CUXT_CUVAL_S,
            LS_E1CUCFG    LIKE E1CUCFG,
            LS_E1CUINS    LIKE E1CUINS,
            LS_E1CUVAL    LIKE E1CUVAL,
            LS_PROFILE    LIKE E1CUCOM,
            LS_VBAP       LIKE VBAP,
            L_CUOBJ       LIKE INOB-CUOBJ,
            L_ATINN       LIKE CABN-ATINN.
      DATA: LT_INSTANCES  LIKE CUXT_CUINS_S OCCURS 0,
            LT_PART_OF    LIKE CUXT_CUPRT_S OCCURS 0,
            LT_VALUES     LIKE CUXT_CUVAL_S OCCURS 0,
            LT_VAR_KEYS   LIKE CUXT_CUVK_S  OCCURS 0,
            LT_KSML       LIKE KSML         OCCURS 0 WITH HEADER LINE,
            BEGIN OF LT_CLINT OCCURS 0,
              CLINT  LIKE KSSK-CLINT,
            END OF LT_CLINT.
      DATA: LT_CUIB       LIKE CUIB_CUOBJ_S OCCURS 0 WITH HEADER LINE.
      DATA: E_ROOT_INSTANCE           TYPE     CUXT_INSTANCE_NO.
      DATA: EV_ROOT_PERSIST_ID     TYPE     IBEXTINST_DATA-EXT_INST_ID.
      DATA: EV_CFG_HAS_CHANGED     TYPE     XFELD.
      DATA: EV_HANDLE_APPL_LOG     TYPE     BALLOGHNDL.
      DATA: L_CUOBJ_NEW           TYPE CUOBJ.
      DATA: L_OWNER               TYPE IBXX_BUSINESS_OBJECT.
      REFRESH LT_E1CUVAL.
      CLEAR LS_VBAP.
      SELECT SINGLE CUOBJ INTO CORRESPONDING FIELDS OF LS_VBAP
                                FROM VBAP WHERE VBELN = I_VBELN
                                            AND POSNR = I_POSNR.
      IF SY-SUBRC <> 0.
        RAISE INSTANCE_NOT_FOUND.
      ENDIF.
      REFRESH LT_CUIB. CLEAR LT_CUIB.
      LT_CUIB-INSTANCE = LS_VBAP-CUOBJ.
      APPEND LT_CUIB.
      CALL FUNCTION 'CUCB_INITIALIZER'
        EXPORTING
          IT_INSTANCES = LT_CUIB[].
      CALL FUNCTION 'CUXI_GET_SINGLE_CONFIGURATION'
        EXPORTING
          I_ROOT_INSTANCE              = LS_VBAP-CUOBJ
        IMPORTING
          E_CFG_HEAD                   = LS_CFG_HEAD
          ES_PROFILE                   = LS_PROFILE
          ET_RETURN                    = ET_RETURN
        TABLES
          E_TAB_INSTANCES              = LT_INSTANCES
          E_TAB_PART_OF                = LT_PART_OF
          E_TAB_VALUES                 = LT_VALUES
          E_TAB_VAR_KEYS               = LT_VAR_KEYS
        EXCEPTIONS
          INVALID_INSTANCE             = 1
          NO_ROOT_INSTANCE             = 2
          INSTANCE_IS_A_CLASSIFICATION = 3
          INTERNAL_ERROR               = 4
          NO_PROFILE_FOUND             = 5
          INVALID_DATA                 = 6
          OTHERS                       = 7.
      IF SY-SUBRC <> 0.
        CASE SY-SUBRC.
          WHEN 1.
            RAISE INSTANCE_NOT_FOUND.
          WHEN 3.
            RAISE INSTANCE_IS_A_CLASSIFICATION.
          WHEN OTHERS.
            RAISE INVALID_DATA.
        ENDCASE.
      ELSE.
        LOOP AT LT_VALUES INTO LS_VALUES.
          IF    LS_VALUES-CHARC = 'SAP_MILLCA_PACKAGING'
             OR LS_VALUES-CHARC = 'PD_CA_PACKING_DM'.
            LS_VALUES-VALUE = '7100010'. "This is test data
            MODIFY LT_VALUES FROM LS_VALUES.
          ELSE.
            DELETE LT_VALUES WHERE CHARC = LS_VALUES-CHARC.
          ENDIF.
          CLEAR LS_VALUES.
        ENDLOOP.
      ENDIF.
    &#50689;&#50629;&#51221;&#48372; &#53945;&#49457; &#48320;&#44221;
      CALL FUNCTION 'CUXI_SET_SINGLE_CONFIGURATION'
        EXPORTING
          I_CFG_HEADER                        = LS_CFG_HEAD
          I_ROOT_INSTANCE                     = LS_VBAP-CUOBJ
        I_PLANT                             =
        I_STRUCTURE_EXPLOSION_DATE          =
        I_STRUCTURE_EXPLOSION_APPL_ID       =
        I_LOGSYS                            =
          IS_PROFILE                          = LS_PROFILE
        IV_ONLY_SINGLE_LEVEL                =
        IV_HANDLE_APPL_LOG                  =
        IV_OBJECT_APPL_LOG                  = 'CIF'
        IV_SUBOBJECT_APPL_LOG               = 'T_CNFG'
        IMPORTING
          E_ROOT_INSTANCE                     = E_ROOT_INSTANCE
          EV_ROOT_PERSIST_ID                  = EV_ROOT_PERSIST_ID
          EV_CFG_HAS_CHANGED                  = EV_CFG_HAS_CHANGED
          EV_HANDLE_APPL_LOG                  = EV_HANDLE_APPL_LOG
          ET_RETURN                           = ET_RETURN
        TABLES
          I_TAB_INSTANCES                     = LT_INSTANCES
          I_TAB_PART_OF                       = LT_PART_OF
          I_TAB_VALUES                        = LT_VALUES
          I_TAB_VAR_KEYS                      = LT_VAR_KEYS
        I_TAB_BLOB                          =
        EXCEPTIONS
          NO_CONFIGURATION_DATA               = 1
          NO_ROOT_INSTANCE                    = 2
          INVALID_INSTANCE                    = 3
          INSTANCE_IS_A_CLASSIFICATION        = 4
          INTERNAL_ERROR                      = 5
          NO_PROFILE_FOUND                    = 6
          INVALID_DATA                        = 7
          OTHERS                              = 8
      IF SY-SUBRC <> 0.
        CASE SY-SUBRC.
          WHEN 1.
            RAISE NO_CONFIGURATION_DATA.
          WHEN 3.
            RAISE NO_ROOT_INSTANCE.
          WHEN 3.
            RAISE INVALID_INSTANCE .
          WHEN 3.
            RAISE INSTANCE_IS_A_CLASSIFICATION.
          WHEN 3.
            RAISE INTERNAL_ERROR.
          WHEN OTHERS.
            RAISE INVALID_DATA.
        ENDCASE.
      ENDIF.
      COMMIT WORK.
    save configuration with next commit
      CLEAR: LS_INSTANCES.
      READ TABLE LT_INSTANCES INTO LS_INSTANCES INDEX 1.
    L_OWNER-OBJECT_TYPE = LS_INSTANCES-OBJ_TYPE.
      L_OWNER-OBJECT_TYPE = 'PVS_POSVAR'.
      L_OWNER-OBJECT_KEY  = LS_INSTANCES-OBJ_KEY.
      CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
        EXPORTING
          ROOT_INSTANCE         = LS_VBAP-CUOBJ
          ROOT_OBJECT           = L_OWNER
        IMPORTING
          NEW_INSTANCE          = L_CUOBJ_NEW
        EXCEPTIONS
          INVALID_INSTANCE      = 1
          INVALID_ROOT_INSTANCE = 2
          NO_CHANGES            = 3
          OTHERS                = 4.
      IF SY-SUBRC > 1 AND SY-SUBRC <> 3.
        CLEAR LS_VBAP-CUOBJ.
        RAISE INTERNAL_ERROR.
      ELSEIF SY-SUBRC = 1.
        LS_VBAP-CUOBJ = L_CUOBJ_NEW.
      ENDIF.
    What's wrong?
    help me to solve this problem.
    Thanks a lot.

    <b>SD_SALES_DOCUMENT_READ</b> Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
    <b>SD_SALES_DOCUMENT_READ_POS</b> Reads sales document header and item material: tables VBAK, VBAP-MATNR
    <b>SD_DOCUMENT_PARTNER_READ</b> partner information including address. Calls SD_PARTNER_READ
    <b>SD_PARTNER_READ</b> all the partners information and addresses
    <b>SD_DETERMINE_CONTRACT_TYPE</b>
    In: at least VBAK-VBELN
    Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
    <b>SD_SALES_DOCUMENT_COPY</b>
    <b>RV_ORDER_FLOW_INFORMATION</b> Reads sales document flow of sales document after delivery and billing
    SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
    SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
    RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
    SD_PACKING_PRINT_VIEW
    SD_DELIVERY_VIEW Data collection for printing
    called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
    RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
    regards
    vinod

  • Issue in Custome FM of Characteristic Value

    Hi All,
    I have created Custom FM for possible values of  Characteristic.
    Its working fine in all transaction except CU60.
    In Cu60 Transaction if user click on F4 for characteristic value My custom help popup is coming.  when user select any of the value its populating in table maintenance. But Issue the issue is when user is saving those value those value are not saving in table maintenance.
    Please tell me if I need to do any addition stuff.
    I have created FM using below SAP Doc.
    Function Module for Checking Values
    In this field, you can enter the name of a function module for checking characteristic values entered by the user. The function module can be created in any function group.
    The following restrictions apply:
    The function module must use the standardized interface.
    The function module name cannot have more than 27 characters.
    This allows names to be inferred for further function modules: for the possible entries on the value assignment screen, and for copying language-dependent value descriptions:
    Function module for possible entries
    <function module for value check> + suffix "_F4"
    Function module for language-dependent value descriptions
    <function module for value check> + suffix "_DC"
    Interface for Function Module for Checking Values
    Import Parameters:
    CHARACT_NO LIKE CABN-ATINN  Internal characteristic number
    CHARACT LIKE CABN-ATNAM  Characteristic name
    VALUE LIKE CAWN-ATWRT  Value to be checked
    Exceptions:
    NOT_FOUND   Value not found
    Interface for Function Module for Possible Entries
    Import Parameters:
    CHARACT_NO LIKE CABN-ATINN  Internal characteristic number
    CHARACT LIKE CABN-ATNAM  Characteristic name
    DISPLAY   Display values only,
       if DISPLAY = 'X'
    ADDITIONAL_VALUES LIKE CABN-ATSON Additional values allowed
       if ADDITIONAL_VALUES = 'X'
       (if you want the possible
       entries dialog box to contain an
       additional line for entry)
    MULTIPLE_VALUES LIKE RCTMV-ATLIS Multiple values allowed
    LANGUAGE LIKE SY-LANGU  Language indicator
    DISPLAY_WITH_LANGUAGE   Display value with description
    Tables
    VALUES LIKE RCTVALUES  Selected values
       When you call this table, it
       contains existing values.
       Deleted values have status 'D'
       in the table.
       New values have status 'I'
       in the table.
    The function module must also let you display and select values using the possible entries pushbutton. To display possible entries, you can use function modules in function group SHL3, such as HELP_VALUES_GET_WITH_TABLE_EXT. The content is described in the function module documentation.
    Interface for Function Module for Language-Dependent Value Descriptions
    Import parameters
    CHARACT_NO LIKE CABN-ATINN  Internal characteristic number
    CHARACT LIKE CABN-ATNAM  Characteristic name
    VALUE LIKE CAWN-ATWRT  Value to be checked
    LANGUAGE LIKE SY-LANGU  System language
    Exceptions
    NOT_FOUND   Value not found
    If you use this function module after the function module for checking values, the language-dependent description of the value is copied to the value assignment screen.
    Note
    Please note that the program code must be based on the predefined interfaces. If your program is not based on these interfaces, the program may terminate with a short dump.
    Please note also that the function module cannot take into account any restrictions on allowed values that are due to inheritance or object dependencies, because the function can only read data that is already saved to database tables. The function cannot read current user entries.

    I  have Created two FM Function Module for Checking Values  and Function Module for Possible Entries

Maybe you are looking for

  • Layout mode....totally confused

    While I've used Logic for several years I'm a total beginner at assigning MIDI controls for live work, or indeed for anything as I've never had much need to. I am therefore finding the Layout mode utterly beyond me, as so far nothing the manual claim

  • Slideshow on Elements 8

    I cannot get Slideshow to operate on Elements 8. I select three photos as a trial and as soon as I click on Create and then Slideshow , Elements closes down completely. has anyone else had this problem? Any ideas? Thank you.

  • Illustrator CS4 can´t sometimes use some fonts

    Hello I have a strange issue with illustrator CS4 under Adobe Creative Suite CS4 Design Premium, which is driving me really crazy. If I am trying to write some text using for example Titilium Font, Olijo or some other ttf and otf fonts, I can see the

  • Installing iTunes 7.0

    Hi. I have a Mac OS X 10.2 and bought a the new iPod nano which demands iTunes 7.0, and iTunes 7.0 demands that you should have a Mac OS X 10.3.9. What to do?

  • Running Windows 7 via bootcamp but cannot update to either 3.1 or 3.2. My MAC OS is 10.6.8

    I am running Windows 7 via bootcamp but cannot update to either 3.1 or 3.2. My MAC OS is 10.6.8. I can  download either version, but I get an error message after attempting to install. First tried Boot Camp 3.2.  Error message indicated I need Boot C