Exclude input fields from report breaks

See
http://htmldb.oracle.com/pls/otn/f?p=24317:234
The radiogroup is based on the deptno.
I specified break on "First and second columns".
This results in the radiogroup also being suppressed on the repeated rows!
Is there a way to suppress only the readonly report fields and show the radiogroup on every row?
Thanks

Actually, suppressing the radiogroup is fine, but the real problem is that when I check the Sum column for say the SAL column as in
http://htmldb.oracle.com/pls/otn/f?p=24317:234
It shows a redundant subtotal for the radiogroup column!
Any way to control this behaviour?
Thanks

Similar Messages

  • How to keep the input field from PDF Form to RTF

    Hi,
    I'm looking to keep the input fields from my pdf form document to Rtf so I can use them in my Rtf document.
    Regards,
    Alan

    Good day Alan,
    I'm afraid that's not possible as form fields in a PDF file have no equivalent either in a Word format (.docx/.doc) or within the Rich Text Format (.rtf).  That data is simply stripped during the conversion as there's no equivalent available.
    Kind regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • Accessing input/ouyput field from report

    Hi All,
    I have one input/output field in the Screen painter.
    But when i am accessing the field from the PAI i am getting a syntax error saying that the field is unknown .
    Please give your help regarding this.
    Thanks in Advance.

    Hi Mayank Verma,
    You should declare the variable with the same name as it's in Screen Painter for that Input/Output field with the associated Dictionary type..
    Once you will declare it the screen will pass the data you entered in screen to the varible you declared in your program..
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Exclude one field from Logical Database's dynamic selection screen

    Hi Guru,
    I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
    I have use the below syntax in my zprogram.
      selection-screen exclude select-options: doc-no.
    However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
    Please advice.
    Best Regards,
    Fung

    The selection part of the logical database defines input fields for selecting data.
              The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
              Include called DB<ldbname>SEL.
            SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
                                                                    SELECTION-SCREEN EXCLUDE ... .
                                                    SELECTION-SCREEN END OF VERSION ver.
    Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
              SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
    If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

  • Input field in report output

    HI EXPERTS,
                   I am taking input from user in my report output then I wil save it to my ztable. For taking input I have used follwing code.
    WRITE : /1 SY-VLINE,
                             (5) ITAB-WERKS CENTERED,
                             SY-VLINE,
                             (4) ITAB-MONTH CENTERED,
                             SY-VLINE,
                             (20) ITAB-MATNR,
                             SY-VLINE,
                             (40) ITAB-MAKTX,
                             SY-VLINE.
                    FORMAT INPUT ON.
                    WRITE (15) ITAB-MENGE.
                    FORMAT INPUT OFF.
                    WRITE:    SY-VLINE,
                             (5) ITAB-MEINS CENTERED,
                              SY-VLINE.
          WRITE : /1(108) SY-ULINE.
    Its showing input field itab-menge but also showing single digit input field just before itab-menge field. how can I remove it.  urgent..........
    thanks
    Khan

    try this,
    WRITE : /1 SY-VLINE,
    (5) ITAB-WERKS CENTERED,
    SY-VLINE,
    (4) ITAB-MONTH CENTERED,
    SY-VLINE,
    (20) ITAB-MATNR,
    SY-VLINE,
    (40) ITAB-MAKTX,
    SY-VLINE,
    (15) ITAB-MENGE input on.
    SY-VLINE,
    (5) ITAB-MEINS CENTERED,
    SY-VLINE.
    WRITE : /1(108) SY-ULINE.

  • Capture the list of fields from Report Explorer?

    Is there a way to readily capture the list of fields used in a given report from the report explorer or field explorer?  I want to streamline my command to only select the fields in use for a given report, and it would be easier if I had a list for each.

    There are usually stored procedures or views available in the database that will list the fields in tables.  I don't think the API is consistent, though, so you should check your database reference.
    The other thing that you could do is use "select *" during development, then note which fields are checked in the field explorer (indicating it's used) and replacing the * with the list of fields once your more or less done with the report.
    Note that if you're not using an SQL command (selected a table instead), I'm pretty sure Crystal only requests the fields from the table that are used by the report.
    HTH,
    Carl

  • Exclude GUID field from tables in tdms transfer.

    Hi,
    We have been asked chek whether it is possible to exclude GUID fileds from tables in TDMS ERP data transfer.
    We ran data replication from ECC to CRM in out pre-prod system, replication populated the CRM GUIDs in ECC. We are going to use pre-prod as sender system for TDMS transfer. GUID field is part of the corresponding object table so the receiver system tables also populated with GUID. What we don't know is how replication behaves when the GUIDs are already populated.
    As I know there is a way to set the GUID filed to NULL value in tdms transfer using scrambling rule. The only concern I am having is how this could affect the ISU data in other tables.
    Please share your opinions on this.
    Thanks
    Praveen.

    The "GUID fields" are used to normalize the data and is the key fields for all CRM applications. If you don't transfer those the system will be "empty" because data relations cannot be found.
    Markus

  • Exclude one field from application.cfm loop

    i am using a cfloop collection tag in the application cfm file to loop through and remove special charachters from submitted forms for xss protection. I want to exclude one or two fields from this because they are date time fields so can't have all the restrictions all of the other fields can. I am picturing something like
    <cfloop collection="blah" item="blahblah">
         <cfif field name is not one of the date time fields>
    < general remove bad charachters code>
         <cfelseif field name is one of date time fields>
    <remove special charachters code>
    </cfif>
    </cfloop
    how do i get the field name to use in the condition above?

    Ummm...
    <cfloop collection="form" item="field">
    <cfif field NEQ "aDateField" AND field NEQ "bDateField" AND field NEQ "cDateField">
       Processs the non-date fields
    <cfelse>
      Process the date fields
    </cfif>
    </cfloop>
    Or slightly easier to maintain.
    <cfloop collection="form" item="field">
    <cfif NOT ListFind(field, "aDateField,bDateField,cDateField")>
       Processs the non-date fields
    <cfelse>
      Process the date fields
    </cfif>
    </cfloop>
    Or the best yet, would be to provide the list you are checking against from sometype of data repository where it is easy to maintain, like a database or configuration or something.  But I will leave that exercise to you to figure out.

  • Exclude "note" field from syncing to plaxo?

    Is it possible to exclude the "note" field from syncing to plaxo or google contacts? I want the names and contact information, but not the notes. I keep personal information there. Thanks!

    You can uncheck songs in the Library and there is an option for your iPod to ignore them. Connect your iPod, go to Preferences>iPod>Music, tick the radio button "only update checked songs"

  • How to remove Built-in-Fields from Report builder report

    I have create SSRS report which is sending email to recipient but at the bottom of report email I am also getting
     report accessible address. I don’t want to send that address to recipient. How should I remove from report builder?
    The report is accessible at the following address
    <<Report address>>
    Rahul

    You have to change the report subscription, and untick the checkbox that says to also send it as a link.

  • Accessing input field from the JSP in dynpage

    HI all,
          I am trying to access the input field of the jsp page in my JSPDynpage but it is always return null.My Input is a normal HTML element not a HTMLB element
    JSP File :
         <hbj:content id="myContext" >
      <hbj:page title="PageTitle">
      <hbj:form id="myFormId" >
         <div class="content">
            <table cellpadding="2" cellspacing="2">
                        <tr>
                               <td>
                                  <label for="name"><strong>UserName:</strong></label><span id="info_name">(This field is required)</span><br />                           
                                     <input name="name" id="name" size="10" maxlength="10" type="text" />
                               </td>
                        </tr>
                        <tr>
                             <td>
                                  <label for="email"><strong>EmailID:</strong></label><span id="info_email">(This field is required)</span><br />                           
                                     <input name="email" id="email" size="20" maxlength="20" type="text" /></td>
                        </tr>\
    </Table>
    JSPDynpage:
           InputField myInputField = (InputField) getComponentByName("name");
         if (myInputField != null) {
          name = myInputField.getValueAsDataType().toString();
                   InputField myInputField1 = (InputField) getComponentByName("email");
         if (myInputField1 != null) {
          name = myInputField1.getValueAsDataType().toString();
    In both the cases myInputField and myInputField1 are null . My Question is what should be the parameter that i need to pass for getComponentByName method.
    Regards,
    Raj.

    hi,
    The way you are trying to get the input field value works good with hbj type elements.
    either you change your input field to an hbj one or use java script inside your jsp page to catch the value
    like
    for HTML:
    [HTML Input Field|http://www.w3schools.com/HTMLDOM/met_doc_getelementbyid.asp]
    and for HTMLB
    refer this link:
    [SAP HTMLB GuideLines|http://www.sapdesignguild.org/resources/htmlb_guidance/index.html]
    Regards,
    Srinu

  • ADF-UIX- How to populate multiple input fields from an lov?

    Like in Forms Developer where using an LOV we can populate multiple tex input items on selection of a value from the LOV, is it possible for us to do the same in ADF UIX.
    Iam usiing JDeveloper 10.1.2

    Have a look at this previous post:
    Re: Can return messageLovinput more than one value?

  • Remove fields from report painter

    Hi,
    I try to create a z transaction code for my report which was built using the report painter tool. I got additional fields like read mode, print report and rebuild frozen report data on the selection screen. How can I remove these fields to make the selection screen identical to the one when executing in report painter tool? Please help!
    Thanks,
    Chuong

    Hi,
    You can change the transaction type:
    Goto SE93 --> Click Change --> In menu bar click on Edit --> Change Transaction type --> Select program and selection screen (Report Transaction) radio button and Save.
    Also make sure that you have selected all the GUI support check box.
    Activate the transaction and execute.
    Hope this may work..
    Regards,
    Prashant

  • Calling two  BAPIs from single input field from Webdynro for ABAP

    Hi experts ,
    here i hve a small problem .
    i hve two BAPIs , both  having olly one import parameter and hving messages as the export parameters .
    so how i hve to call them , give the correct method .
    thanks in advance
    setu

    Refer to this thread
    How to call two Bapi with same inputfield in webdynpro application

  • How i can take a field of report for use it in query?

    i hve a table where bills of customer are ready i simply take it on report by select statement.all bills are ready for print.now problem is that i need history of bills for every customer at it's own bill.when i give self join for history, it also add other customer history .there is any possible way that take customer id(report field) from report and search it's records . plzzzzzzzzzzzzzz

    i hve a table where bills of customer are ready i
    simply take it on report by select statement.all
    bills are ready for print.now problem is that i need
    history of bills for every customer at it's own
    bill.when i give self join for history, it also add
    other customer history .there is any possible way
    that take customer id(report field) from report and
    search it's records . plzzzzzzzzzzzzzzmay be you can use a child query and create a data link between
    the original query and child query on customer id column.
    I mean write a child query for searching records on customer id and then link
    this customer id with your already existing query. I think this will solve your problem

Maybe you are looking for