EXE runs only on machines with LV installed

I updated a program that made the following changes:
Added a set up panel VI to consolidate data input information,starting quadrant control and added a user input for default file location.  This VI opens a new front panel and closes when completed.  The EXE version of this works only on machines that has the full LV installed.
The EXE of the old version distributed fine as an EXE with the app builder.  Now the new version does not run on the LVRT machines.
I'm sure I'm missing some check box in some set up panel like "re-entrant execution" or something like that.  Any clues will be greatly appreciated.
Thanks
DWH
Solved!
Go to Solution.

Hi Dennis,
I'm not sure what is considered calling the VI dynamically.  I have it open when the VI is called and it closes when it is completed.  The VI does show up in the "dependancies" section when I'm building the app so I left all other items at their default settings.  In the source files of the app builder, I'v set the main file as the start up window, then used both the default settings and tried to have the files included as part of the EXE file.  I have seen a message box flash on the screen and was able to capture it on a slow running PC. It is eraching for NIAALpro.lvlib and it is found in an instr.lib.  What I think I need to do is have the EXE not call any external files.  Any hints on how to do that?
Thanks
DWH

Similar Messages

  • Windows 7 64 bit machine with printer installed locally takes 2-3 minutes for printing most of the time and fails to print some time.

    Our customer  have 3-4 windows machines in local area network (No Domain Login) with different OS versions and platform architecture (32 / 64 bit)
    I have no idea about the configuration of  machine to which printer is hooked up but it is running Windows for sure.
    This machine is accessible from any other machine in LAN. They have another machine running Windows 7 64 bit OS  on which they have installed the printer connected to earlier machine  using local printer driver installation
    with local TCP/IP port being selected during installation. Installation goes well,  printer gets installed successfully and  shows ready state. but when we try to print anything on it takes 2-3 minutes to complete print job. They have tried
    this on printers with couple of different model and make but the result is same delayed printing. They have also tried to install different printer drivers like HP printer model specific driver and HP universal driver too , but the result is
    the same in all cases. earlier when they were using  32 bit XP machine with printer installed same way that they installed now for win 7 64 , there was no issue seen with regards delayed printing. is this a issue with windows  7 64
    bit printing system ? or it has to do something with mixed and matched (32/64 bit )printer drivers running on different machines on LAN ?
    I will try to get more information with regards to the machine to which printer is connected.In the mean please revert back to me if any one had face similar issue and able to resolve it successfully.    
    Thanks in Advance.

    Hi,
    Have you tried ping ip address of printer? and check if there exists any data lost in network connection. If your network connection is crowded, it can cause delay for printer.
    Also, please attempt to disable all security software temporarily, such as antivirus, firewalls,etc and
    clear all printer cache.
    Locate to task manager, check the state of spoolsv.exe, including cpu and memory. If it has high cpu or memory usage, it may be caused by malware. Thus, you'd better to make a full scan with the latest anti-virus.
    Karen Hu
    TechNet Community Support

  • Adobe Updater can be run only by users with administrator rights error on 2003 termianl server

    I just installed the latest security update of 8.1.7 on my two terminal servers. Now when each users logs in, they get the following error.
    Insufficient Rights (title)
    Adobe Updater can be run only by usrs with administrator rights.
    They simply click OK and it goes away but it is very annoying. It seems like every time their is an update to Adobe Reader, something goes wrong.
    Does anybody have any thoughts on how to stop the Adobe Updater from loading when my users login? Thanks,
    Justin

    I ended up finding the solution at this link.
    http://forums.adobe.com/message/1770665
    Erech_Belt said
    5. Aug 14, 2008 7:22 AM in response to: (LeaAnn_Coldren)
    Re: Insufficient Rights Window for non-admins after 8.1.2 successful install
    Here is the solution I found.
    "Renaming %program files%/Common Files/Adobe/updater5 to something else removed the error."
    This seems like a brute force approach, but it does work. I checked the event logs after doing this and don't see any errors in the App or System logs. This folder is the location of AdobeUpdater.exe and all of the Adobe .cer files, so it makes sense that this works, but seems like it should generate other errors...
    This is not how I wanted to solve the problem but it did solve it.
    Justin

  • Is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

    is there any way how i can download and run Window based games, with out installing Windows-thus Bootcamp? and if so, is it free?

    No, you must install Windows to run Windows software. You do not need to use Boot Camp (yes, it's free because it comes with OS X.)
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How can i run my .class file with out installing java ?

    Hai friends..am new to java , plz help me any one.
    I wrote a small program in java lang. i want to run this program in my friend's system , which is doesnt have java language .. How can i run this program in my friends system with out installing java language?
    one of my friends told that ,it needs to copy the jvm in to ur directory where the java code is present . How can i copy the jvm from where to where ..?plz help me any one

    Your friend will have to install the Java runtime if they want to run Java
    programs.
    Don't go copying files yourself - and especially don't go copying them to the
    location of the Java code. After all, if your friend wants to run 42 different
    Java programs they shouldn't have to have 42 copies of the runtime.
    Just download and run the installer from this site:
    http://java.sun.com/javase/downloads/index.jsp
    Be careful to download the "Java Runtime Environment" not the JDK.

  • An installer created with LV2011SP1 won't install on a machine with LV2013 installed

    I'm currently working on several FPGA drivers generated with Labview 2011SP1, which include a dll interface and a test program to test functionality of the dll. I used an installation pacakge to install 1) the dll to system32
                                                                   2) the .dll/.lib/.h to an absolute path on the target PC.
                                                                   3) the .exe test program to an absolute path on the target PC.
                                                                   4) the necessary NI components (The NI Labview Run-Time Engine 2011 SP1 f5 and NI R series RIO 13.1),
                                                                       via the additional installers section of the Installer dialog.
    This has been working fine, up until the customer installed Labview 2013 on his system. When I then gave him the next release of the package, it fails to install, with the message <files> "Incompatible with products already installed". Via trial and error I removed various of the 4 items listed above and the problem only disappears when 4), the NI components are removed. I then uninstalled LV2013, and retried my installation and it works. The customer doesn't need LV2013 on the machine so this fix is ok for now, but I am now concerned that all these similar packages I'm producing, delivered to several different customers, could be prevented from working if a target PC contains a later version of Labview than the one it was developed on.
    Can someone confirm this issue and how it can be rectified?
    I've found the following http://digital.ni.com/public.nsf/allkb/F41A941BE2AFAC47862574B100736584 issue which is possibly the same issue, but with a much older version of LV (I'd have expected it to have been fixed by LV2011SP1!). The fix for the above issue is to uninstall the runtime engines, however they don't appear on the list of installed NI products, and to unsintall them I apparently need to use an unsupported tool called msiblaster? Even if this worked, if the customer wanted to use LV2013 in the future, how could I support that?
    I'm getting increasingly frustrated that I spend more of my time trawling the forums finding fixes for LV bugs than trawling my own code fixing my own bugs... 

    redfrank wrote:
    I'm getting increasingly frustrated that I spend more of my time trawling the forums finding fixes for LV bugs than trawling my own code fixing my own bugs... 
    There's an easy solution to that problem.
    Write more buggy code.....
    This joke was brought to you by increasing levels of frustration during a day of non-reproducible  Real-Time benchmarking.....
    Say hello to my little friend.
    RFC 2323 FHE-Compliant

  • How to best migrate userdata to new machine with clean install

    We currently run OS X Server 10.4 on a G4. It's about to give up the ghost, so we want to migrate/move the server to a G5. We could clone the drive, however, I think a clean install would be best to clear out any oddities that may have played a part in the servers demise.
    Is it possible to do a clean install OS X server from onto a blank hard drive, i.e. not an upgrade install. And then migrate the importatn user data, passwords and other important settings etc?
    Or will I have to recreate all users, passwords, shares etc?
    Thanks in advance for any tips.
    Greg Montgomery

    Hi
    Is it possible to do a clean install OS X server from onto
    a blank hard drive, i.e. not an upgrade install. And then migrate
    the importatn user data, passwords and other important settings etc?
    Yes. Passwords don’t transfer over however. Its simple enough to force everyone to change their passwords at next login using Password Policies. If your user base is not that large you could always key them in.
    On the old server unshare any share points first before copying over. I personally like to create a new enclosing (top-level) share point that is named the same on the new server and then copy over the folders/files within. Propagate permissions from there. If the shares are on a RAID or an external device then just unshare them and re-attach to the new server and proceed from there. Although not necessary its a good idea to restart the server after doing this especially if the volumes have also been ACL enabled which you should disable first.
    Exporting and Importing Users and Groups from WGM is simple enough.
    In Server Admin above the settings button for each service configured is the property list icon. You can drag this to the desktop or a memory stick and use these property lists to re-configure the new server. If you suspect that any oddities on the old server are down to a suspect service then don’t bother and re-do the service from scratch. If you are using internal DNS Services then I would also advise to redo this from scratch unless you are absolutely certain that there was nothing wrong with the service on the old server. The only plist that I would advise not to transfer over would be Open Directory if its anything other than Standalone. You can transfer over and re-locate the LDAP database if it is an OD Master but again if you suspect your original oddities stem from there then don’t bother. In my view unless you have absolutely never had a problem and you are not changing anything I would always start from Standalone and promote from there.
    Tony

  • Installing cs6 on machine with cs4 installed

    I have cs4 design premium installed on my machine I want to install CS6 design and web premium trial on the same machine will it mess up my cs4 install?

    No, CS6 won't do anything to your CS4. However, be aware that there may be compatibiliuty issues. E.g. if the install replaces a globally used PDF library and CS4 can't handle it, exporting to PDF may not be possible in CS4 programs. Similarly, all file associations will point to CS6 after the install, meaning double-clicking a file will open it in CS6, not Cs4 and things liek invoking Bridge from one of the programs will also use the CS6 version. finally, you may experience issues when removing CS6 and the uninstaller removes a critical global component used by CS4 because it only thinks of its own stuff. So in summary: Within the limitations it will be safe and even if you let the trial run out without making a purchase, it would be best to leave CS6 on teh machine after that to avoid complications.
    Mylenium

  • Can a Labview application EXE run on a PC with 128MB RAM

    Hi,
      What is the minimum requirement of the LabVIEW application exe  to run on  a PC. Is it necessary to have 256 MB RAM PC.
    Regards,
    Sowmya

    See Release notes. They can be found in the support section of the website or on the install CD/DVD.
    Message Edited by andre.buurman@carya on 10-30-2007 10:42 AM
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • How do I update/restore my phone to a different version with no internet access on the machine with iTunes installed?

    I have downloaded the version of iTunes needed, and the iOS version I wish to use from work, but am unable to restore the version of iOS as iTunes seems to be blocked at work, and I do not have internet at home, aside from on my phone.
    Thanks in advance for the help!
    ~Nathaniel

    You can ONLY restore to the latest available software.
    If you have ios 5 on your iphone you can update from the iphone itself.
    Otherwise you would need to restore from a computer with itunes and the internet.

  • Insert performance in same specification machines with fresh install

    Hi all,
    I has some problems testing my fresh oracle 11g2 installation in Win7 O.S. We have two EliteBook 8760w, purchasing at the same time and installing estandar edition and other programs using the same procedure.
    After that, we start making a massive insert in the database (near 70GB of data). In one of these laptops, the duration of the insert was 4 time more than in the other.
    Other proccesses took more or less the same time, but inserts still take four time more.
    Anyone can bring me some light about the cause?
    Thanks for all :)
    Regards,

    953955 wrote:
    Hi all,
    I has some problems testing my fresh oracle 11g2 installation in Win7 O.S. We have two EliteBook 8760w, purchasing at the same time and installing estandar edition and other programs using the same procedure.
    After that, we start making a massive insert in the database (near 70GB of data). In one of these laptops, the duration of the insert was 4 time more than in the other.
    Other proccesses took more or less the same time, but inserts still take four time more.
    Anyone can bring me some light about the cause?
    Thanks for all :)
    Regards,post FORMATTED EXPLAIN PLAN from both INSERT statements

  • Just bought a Macbook pro 17" 2.16 with 2gb ram and 500gb 5400 HD. IT RUNS VERY SLOW, even with fresh install of X 10.6, what do I do?

    So I just bought a great condition Macbook pro 17" with 2gb of ram, and the last owner upgraded the HD to a 500gb toshiba 5400rpm HD....the computer is VERY slow....when loading up anything it take forever, and watching video's freezes it for a few seconds then starts for a 1-3 seconds then freezes again....what can I do? I really like the laptop, but hate the performance...and I don't want to go buy another one....but I have considered a SSD....any idea's before I do that?
    Thanks.

    How much hard drive space do you have left?
    Sluggish Finder - Bunch of icons on your desktop?  An overcrowded desktop slows down your Mac.
    Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options:  ensure "Calculate All Sizes" option is unchecked.
    Internet related - It's likely that your broadband connection is the bottleneck.  You can check your speed on http://www.speedtest.net to see how fast your connection is.  If your web browser specifically performs slowly, quit and relaunch it.
    If browser remains sluggish, empty its cache.
    Safari/Empty Cache
    Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
    Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top.  If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance.  Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
    Too little ram - max out your ram.

  • I am running 10.7.4 with Java installed an applets enabled, if I update to 10.8, will I need to re-install Java?

    Does Java installation and "Enable java applets" carry through if you upgrade from Lion to Mountain Lion or does Java have to be re-installed?

    Kappy
    Thanks, I was aware that a clean install erases the drive and that, since 10.7.3, Java is not part of the OS X install, but could be easily added via java preferences.app.  I was not aware of how the 10.8 installer behaved when Java had been installed on a prior version.  I appreciate the help.

  • Run Only Applications

    Hi!
    I am using Application Express version 4.0.2. What I have seen is if I install an application that has been exported as "Run Only" then subsequent attempts to install exported components from the application later are not successful - and an install of the full application is required.
    I am trying to learn more about this behavior, and see if perhaps I am doing something wrong. Is it the case that we can only install components (like individual pages) to applications that are enabled for "Run and Build" or should I be able to install individual components to a "Run Only" application?
    Does anyone know where I can find some information on this topic?
    Thank you!
    Lisa

    Hi,
    I did find something from documentation
    *Run Application Only* - Users can only run the application. This option is intended for applications in a production instance.
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/bldr_attr.htm#sthref677
    Every Oracle Application Express application has an application-level attribute called Build Status. You can use this attribute to prevent an application from being modified by other developers. Build Status has two settings:
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35129/adm_mg_wrkspc.htm#AEADM289
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

  • How can i run my java program with out java language

    Hai to every one ..Iam new to java language ...am using windows xp operating system , i did not installed java language in my system .. how can i run a java program with out installing java language... Which files is requied to run java program..?
    any one can help me??

    Hai to every one ..Iam new to java language ...am
    using windows xp operating system , i did not
    installed java language in my system .. how can i run
    a java program with out installing java language...
    you ... can ... not ... do ... this
    Which files is requied to run java program..?
    any one can help me??a JVM. Download it from sun's website.
    [url http://java.sun.com/javase/downloads/index.jsp]Download JavaSE here

Maybe you are looking for