Windows 7 64 bit machine with printer installed locally takes 2-3 minutes for printing most of the time and fails to print some time.

Our customer have 3-4 windows machines in local area network (No Domain Login) with different OS versions and platform architecture (32 / 64 bit)
I have no idea about the configuration of machine to which printer is hooked up but it is running Windows for sure.
This machine is accessible from any other machine in LAN. They have another machine running Windows 7 64 bit OS on which they have installed the printer connected to earlier machine using local printer driver installation
with local TCP/IP port being selected during installation. Installation goes well, printer gets installed successfully and shows ready state. but when we try to print anything on it takes 2-3 minutes to complete print job. They have tried
this on printers with couple of different model and make but the result is same delayed printing. They have also tried to install different printer drivers like HP printer model specific driver and HP universal driver too , but the result is
the same in all cases. earlier when they were using 32 bit XP machine with printer installed same way that they installed now for win 7 64 , there was no issue seen with regards delayed printing. is this a issue with windows 7 64
bit printing system ? or it has to do something with mixed and matched (32/64 bit )printer drivers running on different machines on LAN ?
I will try to get more information with regards to the machine to which printer is connected.In the mean please revert back to me if any one had face similar issue and able to resolve it successfully.
Thanks in Advance.

Hi,
Have you tried ping ip address of printer? and check if there exists any data lost in network connection. If your network connection is crowded, it can cause delay for printer.
Also, please attempt to disable all security software temporarily, such as antivirus, firewalls,etc and
clear all printer cache.
Locate to task manager, check the state of spoolsv.exe, including cpu and memory. If it has high cpu or memory usage, it may be caused by malware. Thus, you'd better to make a full scan with the latest anti-virus.
Karen Hu
TechNet Community Support

Similar Messages

Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?

Hi,
I have been searching the web to find out the best way/place in which to load Captivate 4 on my Windows 7 64-bit machine. Seems some people have issues with recording, others don't. I have Windows XP mode on my machine.
My question is... what's the best way to load Captivate 4 on Windows 7 - should I install to Windows 7 and see how it goes. Or should I install under Windows XP mode?
Thank you!
Michele

Yea it works in XP mode
Daniel Wooden
Systems
U.S. District Court Middle District of Tennessee
615-736-7485
From:   RodWard <[email protected]>
To:     DEW45 <[email protected]>
Date:   09/24/2011 12:01 AM
Subject:        Install Captivate 4 on Windows 7 64-bit
machine with Windows XP mode?
Re: Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?
created by RodWard in Adobe Captivate - View the full discussion
Try running Cp4 in WinXp compatibility mode on Win7. Also make sure
you're set to Run as Administrator.
I run Cp4 on Win7 without issues. But other users report similar problems
to yourself. In the end, it may or may not work for you because Adobe has
never claimed Cp4 was compatible with Vista or Win7 64bit.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3935593#3935593]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3935593#3935593]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Windows 7 64 Bit machine with Instant Client and 32Bit application

Hello everybody,
the last days a tried to get a 32Bit application to run on a Windows 7 SP1 64 Bit machine ... unfortunately with no success. The application runs on XP Pro and Vista Pro 32 Bit machines against a 11g RDBMS for years. As a refenence we use SQLTools from sqltools.net. It has nearly the same behaviour like the application, because it is a 32 bit application too.
First thing was to install a 64 bit environement to verify if the connection is allright.
- Downloaded instantclient-basic-windows.x64-11.2.0.2.0.zip an instantclient-sqlplus-windows.x64-11.2.0.2.0.zip
- Unpacked both packages into C:\oracle so that they reside in C:\oracle\instantclient_11_2
- Made a directory C:\oracle\tnsnames with tnsnames.ora in it, because the app uses it
- Set the environement variables TNS_ADMIN to point to C:\oracle\tnsnames and added C:\oracle\instantclient_11_2 in front of the path variable
- Restarted the machine
- Opened a commnd shell and startet sqlplus user/password@sid
Everything was allright, I was able to connect to the database as expected
Second thing was to start SQLTools, but as I feard it quitted with an error message when trying to access oci.dll of the instant client.
So i decided to switch to a 32 bit environement as a third thing.
- Downloaded instantclient-basiclite-nt-11.2.0.2.0.zip and instantclient-sqlplus-nt-11.2.0.2.0.zip
- Deleted the old C:\oracle\instantclient_11_2
- Unpacked both 32 bit packages into C:\oracle so that they reside in C:\oracle\instantclient_11_2
- Didn't change anything in the environement, because nothing changed from the view of the system
- Opened a commnd shell and startet sqlplus user/password@sid
But now I wasn't able to connect and got the following error
ORA-28547: connection to server failed, probable Oracle Net admin error
SQLPlus was able to start now, but when trying to connect to the database I got the same error like when connecting with sqlplus.
Does anybopdy have an idea how to manage to get a 32 bit application to run on a Windows 7 64 Bit machine?
Thanks in advance
My packages:
Windows 7 64 bit SP1
Oracle Instant Client basic lite 11.2.0.2.0
SQLPlus 1.5 22D

Have you tried WOW64 ? I have not used this emulator for sqlplus but it works for other 32 bit applications.
http://msdn.microsoft.com/en-us/library/aa384249%28v=VS.85%29.aspx
Thanks

Sharing an HP deskjet 9800 on a windows 7 64 bit machine with a machine running XP 32 bit

I have Windows 7 (64bit) on my computer. I want to install an x86 driver for my HP Deskjet 9800 printer so my XP laptop can print to this printer through my home network. I started by clicking on Devices and Printer, clicked on the HP Deskjet printer icon, right clicked the icon and selected Printer Properties. I clicked on the Sharing tab and the change setting button. I then selected Additional Drivers. I put a check in the box next to x86 and clicked OK. Windows wants me to provide the driver. I downloaded the xp driver from HP and can see it in a folder on the desktop but get an error something to the affect of "not compatiable with
64 bit system"
How do I get this driver installed on my computer? or is there another solution to print to this printer from my XP machine?

Try the following: On the XP machine go to the Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then select HP Deskjet 9800 series. (If the Deskjet 9800 is not available install the driver as if the printer was connected to LPt1:, then after the drivers are installed cancel and go back and add printer pointing to the new shared port.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have DSL High-Speed with Earthlink, but it takes nearly 30 minutes for Firefox to bebin loading, including getting message "unresponsive script": I then press "continue" and wait three more minutes. This happens every time I turn on my PC (Windows XP Ho

see above
== This happened ==
Every time Firefox opened
== since downloading Firefox at an alternative to Internet Explorer

Hello Howard.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there.

Anyone experiencing multiple crashes since installing yosemite? I use logic 9 software most of the time for recording.

Hi, Im experiencing multiple crashes on my macbook pro. I have recently (past 2 weeks) installed yosemite. Could this have something to do with it?
I use logic pro 9 all day every day but am finding it very difficult to record with a constantly unstable mac! It just cuts out and restarts itself.
Any ideas?
Mike.

rigsby531 wrote:
Hi, Im experiencing multiple crashes on my macbook pro. I have recently (past 2 weeks) installed yosemite. Could this have something to do with it?
Mike, I would say Yosemite has -everything- to do with it. Logic 9 has several known problems with Yosemite.
You should not upgrade the OS without first checking boards like this one, the only solution for Logic 9 users is to roll back the operating system to whatever you were using that was stable. (Logic-X isn't so great in Yosemite either).
Because stability is important to me I'm using Snow Leopard and Logic 9,1,5, and my upgrade to Logic 9.1,5 was only a few month ago.

Is there a way to install just the 32 bit version of Photoshop CS5 on a Windows 7 64 bit machine?

I have a custom built Java 6 application that doesn't like Photoshop CS5 64 bit edition. The program copies over a file from the network to the local machine and then opens it in Photoshop. The user manipulates the image and saves the changes. The user then completes the image and the application copies the image back to the server. The problem we're having is: When we use Photoshop CS5 64-bit, it takes about 2 minutes for Photoshop to open the image. The file is copied over within 2 seconds and the Photoshop icon on the windows taskbar starts flashing. But then you spend a few minutes waiting for it to open.
Some things that I have tried to isolate the problem:
- I found you can copy the file somewhere else, double click on it and the image will open in Photoshop before the script is able to open the file.
- I tried uninstalling Photoshop and reinstalling just the 64 bit edition without the 32 bit installation. The script just stops working in this situation.
- I tried uninstalling CS5 and installing CS3. The image opens as soon as the file is copied over.
What I would like to try next is to install just the CS5 32 bit version. But the installer is being uncooperative and will only allow either the 64 bit version or both the 64 and 32 bit versions. So, back to my question: Is there a way to install just the 32 bit version of Photoshop CS5 on a Windows 7 64 bit machine?

Do you mean schroot? If so I'm not sure exactly how well that will work out, because the part that depends on python is a deamon that handles communication between the USB dongle and the Tux Droid which may mean hacking the deamon a bit so ether way this does not seem like it will be a easy task.

Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems

Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems? I have over 400 GB,s free disc space (c drive) and still am getting lots of errors and program closing problems. I do not have USB3 on my machine so if I purchased a few 256 GB ssd drives would this help it from crashing?
Thank you in advance for any guidance.
Message was edited by: jackg032

jackg032 wrote:
Is anyone running Photoshop CS6 on a Windows Vista 32 bit machine without problems? I have over 400 GB,s free disc space (c drive) and still am getting lots of errors and program closing problems. I do not have USB3 on my machine so if I purchased a few 256 GB ssd drives would this help it from crashing?
Thank you in advance for any guidance.
Message was edited by: jackg032
Jack, as Curt has suggested, available drive space comes well down the list regards a happy experience with Photoshop. You have also asked a self-defeating question, because the fact you are running Vista, and a 32bit version at that, more or less precludes the ability to run without problems.
Windows 7 was billed as the first MS OS to need less system resources than its predecessor. If your system hardware will support 64bit, then consider paying $90 for an OS upgrade What is your system out of interest? I have a feeling you are running with just 2Gb RAM, which just isn’t enough. Post your specs or make and model, and I am sure you’ll get some help with what your mainboard will handle by way of RAM and whether it will support 64bit.

After I install itunes my windows 7 - 64 bit machine will not boot and I have to use Restore to boot with a date before I installed itunes

After I install itunes on my windows 7 - 64 bit machine it will not reboot and I need to restore to a date before itunes was install. How do I fix this?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

Trying to install a setup on a 64 bit machine with Windows server 2012 R2 which writes to registry FAILES

My msi is a 32 bit setup.
When I install it on a 32 bit machine with Windows XP it works fine .
I tried to install it on a 64 bit machine with windows server 2008 and it succeeds
While running my setup on a 64 bit machine with Windows server 2012 R2 it failes and I get the folloawing message:
"Registry object reference not set to an instance of an object"
Then the setup exits and leaves the app partially installed
I tried searching for known problems over the net, but found nothing
I will be happy to get some advice
Thanks
Liora

Sounds like you are trying to update a registry object that is not there.
Is this your own msi, or is it from a third party application? If third party, check with them to see if they support it on 2012 or if they have a known workaround.
If it is your own msi, sounds like it is time to debug it.
.:|:.:|:. tim

How to install Photoshop 5 in Windows 7 64 bit machine

My Windows XP laptop quit. New laptop is Windows 7 64 bit machine. When I install Photoshop CD and select Install Photoshop 5, nothing happens. I found this link: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5162
but I cannot open it. The instructions with it say to copy into Files (x86\Adobe\Adobe Photoshop, but since I cannot get Photoshop 5 to load, there is no Adobe Photoshop files in x86\Adobe, only Adobe Reader. Help! I have lots of files I use Photoshop 5 to edit and now no way to edit them.

a. enable file extensions to be visible:
To show file name extensions in Windows Explorer, follow these steps:
For Windows Vista, Windows 7, and Windows Server 2008
Start Windows Explorer, you can do this by opening up any folder.
Click Organize.
Click Folder and search options.
Click the View tab.
Scroll down until you notice Hide extensions for known file types, un-check this line by clicking the check box.
Note To hide file name extensions, check this line.
Click OK
b. open the photoshop directory/folder and attach a screenshot of its contents.
c. open autorun (setup info) in notepad and copy and paste its contents here.
d. open readme.wri in wordpad and see if it contains anything useful.

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
Thanks

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

Error installing AIR 3.3 on Windows 7 64 -bit machine

Hello, I am getting the following error when trying to install an AIR application onto a specific Windows 7 64-bit machine. It seems to be only happening to this one machine. I am installing as Administrator. Any thoughts? Thanks
[2012-07-10:09:14:02] Bootstrapper begin with version 2.6.0.19120 on Win x86
[2012-07-10:09:14:02] Installed runtime (3.3.0.3650) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2012-07-10:09:14:02] Launching subprocess with commandline "Adobe AIR Application Installer.exe" "C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter"
[2012-07-10:09:14:02] Application Installer begin with version 3.3.0.3650 on Windows 7 x86
[2012-07-10:09:14:02] Commandline is: C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter
[2012-07-10:09:14:02] Installed runtime (3.3.0.3650) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2012-07-10:09:14:03] Validating app in folder C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter
[2012-07-10:09:14:03] Application signature verified
[2012-07-10:09:14:03] Unpackaging/validation complete
[2012-07-10:09:14:04] No app located for appID 'transporter' and pubID ''
[2012-07-10:09:14:06] Starting app installation to C:\Program Files (x86). Installing app transporter version 0.46 using the source file at file:///C:/Users/a210693/AppData/Local/Temp/AIR7495.tmp/Transporter
[2012-07-10:09:14:06] Installing msi at C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter\setup.msi with guid {0ABBADCF-B729-C4A4-8D6E-2D2954077F1F}
[2012-07-10:09:14:06] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-07-10:09:14:06] Rolling back install of C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter\setup.msi
[2012-07-10:09:14:06] Rollback complete
[2012-07-10:09:14:06] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-07-10:09:14:06] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/a210693/AppData/Local/Temp/AIR7495.tmp/Transporter
[2012-07-10:09:14:06] Relaunching with elevation
[2012-07-10:09:14:06] Application Installer begin with version 3.3.0.3650 on Windows 7 x86
[2012-07-10:09:14:06] Commandline is: -stdio \\.\pipe\AIR_4588_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/a210693/AppData/Local/Temp/AIR7495.tmp/Transporter
[2012-07-10:09:14:06] Installed runtime (3.3.0.3650) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2012-07-10:09:14:07] Validating app in folder C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter
[2012-07-10:09:14:08] Application signature verified
[2012-07-10:09:14:08] Unpackaging/validation complete
[2012-07-10:09:14:08] No app located for appID 'transporter' and pubID ''
[2012-07-10:09:14:08] Starting silent app installation to C:\Program Files (x86). Installing app transporter version 0.46 using the source file at file:///C:/Users/a210693/AppData/Local/Temp/AIR7495.tmp/Transporter
[2012-07-10:09:14:08] Installing msi at C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter\setup.msi with guid {0ABBADCF-B729-C4A4-8D6E-2D2954077F1F}
[2012-07-10:09:14:08] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-07-10:09:14:08] Rolling back install of C:\Users\a210693\AppData\Local\Temp\AIR7495.tmp\Transporter\setup.msi
[2012-07-10:09:14:08] Rollback complete
[2012-07-10:09:14:08] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-07-10:09:14:08] Elevated install failed: error 0 1603
[2012-07-10:09:14:09] Application Installer end with exit code 7
[2012-07-10:09:14:10] Subprocess Application Installer failed (7)
[2012-07-10:09:14:10] Bootstrapper end with exit code 7

2013-12-31 18:31:14:551 4572 830 Handler :: START :: Handler: CBS Install
2013-12-31 18:31:14:551 4572 830 Handler :::::::::
2013-12-31 18:31:14:553 4572 830 Handler Starting install of CBS update EB29E59C-58F6-4880-AC9A-F34FBCC9F60B
2013-12-31 18:31:14:554 4572 830 Handler CBS session identity: 30344744_1660039064
2013-12-31 18:31:14:561 4572 830 Handler CBS package identity: Package_for_KB2855336~31bf3856ad364e35~amd64~~6.2.1.0
2013-12-31 18:31:14:585 4572 830 Handler Installing self-contained with source=C:\Windows\SoftwareDistribution\Download\784293409cedf74c648cae7b5a3d128a\Windows8-RT-KB2855336-x64.cab, workingdir=C:\Windows\SoftwareDistribution\Download\784293409cedf74c648cae7b5a3d128a\inst
2013-12-31 18:32:27:798 4572 1240 Handler FATAL: CBS called Error with 0x80070005,
2013-12-31 18:32:33:927 4572 830 Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x80070005
2013-12-31 18:32:34:051 4572 830 Handler :::::::::
2013-12-31 18:32:34:051 4572 830 Handler :: END :: Handler: CBS Install
at a guess, CBS is encountering this access denied error and aborting due to an inconsistency in the servicing store.
check your CBS.log file
you should check your system health with SFC /scannow
also check system health with DISM:
http://www.eightforums.com/tutorials/26512-dism-fixing-component-store-corruption-windows-8-a.html
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Can We Install Hyperion EPM in 64 bit machine with windows8?

Hi Gurus,
Can We Install Hyperion EPM in 64 bit machine with windows8?

There is 64 windows versions available in edelivery - "Oracle Enterprise Performance Management System (11.1.2.2.0) Media Pack for Microsoft Windows x64 (64-bit)"
Cheers
John
http://john-goodwin.blogspot.com/

Windows 7 64 bit machine with printer installed locally takes 2-3 minutes for printing most of the time and fails to print some time.

Similar Messages

Maybe you are looking for