Executed CheckFlightSeatAvailability error

hi,
When i executed the sample CheckFlightSeatAvailability（Proxy_2_Proxy）which was took along by xi.there arose a mistake:"HTTP response contains status code 401 with the description Unauthorized "
Can anybody tell me the reason which resulted it?
nelson

HI,
Check the following..
Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
If the error is in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
May be wrong password for user XIISUSER
May be wrong password for user XIAFUSER
for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
-- Also check the data exactly maches the width and like flight no :450 then ,if th e field length id 5 then it may be '00450'.
Regards
Chilla

Similar Messages

Dynamically called VI becomes broken inside an executable. Error 1003 from "Open VI Reference".

Here's the problem. Dynamically called VI becomes broken inside an executable in debug executable mode Error 1003 is occuring from "Open VI Reference" Block. The computer has all of the necessary drivers, NI-VISA and NI-DAQmx. This executable is a new release of software that currently works on the PC in question. I can using NI-VISA Remote Server control the instruments from my PC using the executable. But when I put the executable on the PC I am getting this error. The only way I have been able to get this to work properly is to build the executable from the console I believe the project was created in, note that the project file has been moved to a network drive and it still works. All of the stations I have opened the project in show the VI that is being called is runnable. I've tried building the executable from the console I am deploying to and the same thing happens.
I am honestly at a loss for ideas why this is occuring. Is this something about the way LabView works internally that may be causing this problem?
I have trolled this forum for idea's and none have made sense to me.
Any input would be greatly appreciated.
-Nate

Two ideas:
Mass compile the project to ensure all linkages are ironed out
Include the dynamically launched VI's into the "Always Included" section of the build spec
Report back on if either of these actions solves your problem.
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

Hi All,
I'm using diadem from .net Program. While on the run I'm getting the following error.
Error While executing "" Command
Error type ACCESS VIOLATION
Error Address: 0006898E
Module name:gfsdesk.DLL
Anyone have any idea why this is happening?
regards,
Swaroop

Hi Swaroop,
It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
Andreas

How to re-execute the error items at one time in SMQ2(t-code)

Hi Experts,
today i went to check the Inbound Queues using SMQ2, there are so many error queues, how can i re-execute these error queues at one time?
Thanks&Regards,
Su

Hi Su,
While you are inside a particular error queue, choose 'Unlock' and in the popup give CF* (or whatever queue prefix you have) and run. It will execute all the error queues / LUWs starting with CF*, for example.
Regards,
biplab

SharePoint 2010 Unable to execute query: Error 0x80131530

I am seeing the below error message in the ULS logs while accessing some set of items in the list and the item will not get
opened after long tim.
"Unable to execute query: Error 0x80131530
Unknown SPRequest error occurred. More information: 0x80131530
System.Web.HttpException: Request timed out."
This list has 202 items in total with 45 columns in total (includes
5 lookup columns, 3 append history columns).
Items which has more than 20 versions is not loading.
In the same site, there is another list of the same template with 2009 items and some items with more
than 80 versions works fine.
Please let me know if you have any suggestion to fix this.

Yes there are 2 simple SPD workflows. One of the workflow operation is to send email and other one is to create an item in another based on condition.
The other list which works fine also has similar SPD workflows.

While executing FPG1 error message F5858 is encountered

Hi,
While executing FPG1, error F5858 is encountered. Message details : System Error : Amount field is negative.
Kindly provide your valuable feedback.
Regards,
Paresh

Hi,
Origin key is R9 and as I understand this occurs in cases FMTYP G (payment on account) cases and yes BTRW is negative amt while PSWBT is zero.
Although I have many such cases, I will not be able reproduce such case as I don't know where and how this cases gets generated.
More over, I failed to understand what is difference between BETRW and PSWBT and why there arises difference between the two?
Hope you can enlighten me.
Regards,
Paresh

How to get error's field name when execute sql error

I want to get the error's field name when execute sql error,but SQLException is not provide corresponding function to get it.
How can I do for it?

user523110,
I believe the "unique constraint" error message displays the name of the constraint, not the column name, as you have posted.
As far as I know, the only way to extract the column(s) would be to query the data dictionary using the constraint name provided in the error message.
Also, as far as I know, there is nothing in the JDBC API that can return the names of the columns associated with a given unique constraint.
Good Luck,
Avi.

@@/oracle/RSS/102_64/rdbms/admin/catproc.sql Executed with error.

Hi All,
We are in process of CU&UC during the unicode process , we have exported the DB and during Import during create database phase we are facing this problem..
Please suggest.....
@@/oracle/RSS/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
Thanks,
Subhash.G

Some more errors:
Below error from sapinst.log for reference .
INFO 2007-11-03 06:19:35 Removing file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/ora_query3_tmp0_1.sql. INFO 2007-11-03 06:19:35 Creating file /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/ora_query3_tmp0_1.sql. ERROR 2007-11-03 06:43:42 CJS-00084 SQL statement or script failed.
DIAGNOSIS: Error message: ORA-955 for defaultdest ERROR 2007-11-03 06:43:45 MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined. ERROR 2007-11-03 06:43:47 FCO-00011 The step runCatprocSql with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql was executed with status ERROR . INFO 2007-11-03 06:53:37 An error occured and the user decide to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|runCatprocSql"
Error from ora_sql.log
@@/oracle/RSS/102_64/rdbms/admin/catproc.sql exit; Executed with error.
Thanks

Execute procedure error (Native SQL)

Hi experts,
I create a procedure
EXEC SQL.
    create or replace procedure update_zsmadiprinc
    is begin
                          ( p_codigo         in number(5),
                            p_ano            in varchar2(4),
                            p_doc_vlr_princ in varchar2(10)
                            p_subrc       out number ) is begin
      update T_INTERF_RESSARC_FORNEC_R3
      set   ano_doc              = p_ano,
            NUM_DOC_VALOR_PRINC = p_doc_vlr_princ,
      where cod_interf_ressarc_fornec_r3 = p_codigo;
      if sql%found then
        p_subrc := 0;
      else
        p_subrc := 4;
      end if;
    end;
ENDEXEC.
and execute it
EXEC SQL.
    execute procedure update_zsmadiprinc
                     (in :wa-cod_interf,
                      in :wa-ano_doc,
                      in :wa-num_doc_valor_princ,
                      out :vg_subrc)
ENDEXEC.
But when i execute the procedure, shows dump error:
Database error text........: "ORA-06550: line 1, column 7:#PLS-00905: object
UPDATE_ZSMADIPRINC is invalid#ORA-06550: line 1, column 7:#PL/SQL:
Statement ignored#"
Triggering SQL statement...: "CLOSE "
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
I comment all source, and the error is the same.
When i create the procedure, no erros are show.
I changed the name of the procedure, the type of parameters, and now i comment all and the error always is the same!!!! Can you help me!!! I need to finish this urgently!
Thanks in advance
Message was edited by:
        RP

It is not possible to create a procedure, then, i just execute sql direct.
thanks

11.1.2.1 execute dataload error in erpi and FDM

Hi
I met a critical problem when execute dataload in erpi using classic method.
there are data in E business suite, but I don't know why I can't pull data from EBS.
also I execute dataload using FDM method, the import step in FDM yields an error: "error creating database link".
could you help me to find the problem?
regards,
Samantha
the error message please refering this:
java.lang.Exception: ERROR: Drill Region was not created/updated. No valid data rows exist in TDATASEG_T for Process ID: 14
ERPI Process Start, Process ID: 14
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\/aif_14.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Process Periods - Insert Periods - START
COMM Process Periods - Insert Periods - END
COMM Process Periods - Insert Process Details - START
COMM Process Periods - Insert Process Details - END
LKM EBS/FS Extract Type - Set Extract Type - START
LKM EBS/FS Extract Type - Set Extract Type - END
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
LKM EBS/FS Extract Delta Balances - Load Audit - START
LKM EBS/FS Extract Delta Balances - Load Audit - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
LKM EBS/FS Extract Type - Set Extract Type - START
LKM EBS/FS Extract Type - Set Extract Type - END
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
LKM EBS/FS Extract Delta Balances - Load Audit - START
LKM EBS/FS Extract Delta Balances - Load Audit - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
EBS/FS Load Data - Load TDATASEG_T - START
Import Data from Source for Period '2011年八月'
Monetary Data Rows Imported from Source: 182
Total Data Rows Imported from Source: 182
EBS/FS Load Data - Load TDATASEG_T - END
COMM Update Data - Update TDATASEG_T/TDATASEGW - START
Warning: Data rows with zero balances exist
Zero Balance Data Rows Deleted: 8
Processing Mappings for Column 'ACCOUNT'
Data Rows Updated by 'DEFAULT' (LIKE): 174
Processing Mappings for Column 'ENTITY'
Data Rows Updated by 'DEFAULT' (LIKE): 174
Processing Mappings for Column 'ICP'
Data Rows Updated by 'DEFAULT' (LIKE): 174
Processing Mappings for Column 'UD1'
Data Rows Updated by 'Custom1' (LIKE): 174
Processing Mappings for Column 'UD2'
Data Rows Updated by 'Custom2' (LIKE): 174
Processing Mappings for Column 'UD3'
Data Rows Updated by 'Custom3' (LIKE): 174
Processing Mappings for Column 'UD4'
Data Rows Updated by 'Custom4' (LIKE): 174
Processing Mappings for Column 'UD5'
Data Rows Updated by 'Value' (LIKE): 174
Warning: Data rows with unmapped dimensions exist
Data Rows Marked as Invalid: 174
Warning: No data rows available for Export to Target
Total Data Rows available for Export to Target: 0
COMM Update Data - Update TDATASEG_T/TDATASEGW - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
EBS/FS Load Data - Load TDATASEG_T - START
Import Data from Source for Period '2011年九月'
Monetary Data Rows Imported from Source: 193
Total Data Rows Imported from Source: 193
EBS/FS Load Data - Load TDATASEG_T - END
COMM Update Data - Update TDATASEG_T/TDATASEGW - START
Warning: Data rows with zero balances exist
Zero Balance Data Rows Deleted: 69
Processing Mappings for Column 'ACCOUNT'
Data Rows Updated by 'DEFAULT' (LIKE): 124
Processing Mappings for Column 'ENTITY'
Data Rows Updated by 'DEFAULT' (LIKE): 124
Processing Mappings for Column 'ICP'
Data Rows Updated by 'DEFAULT' (LIKE): 124
Processing Mappings for Column 'UD1'
Data Rows Updated by 'Custom1' (LIKE): 124
Processing Mappings for Column 'UD2'
Data Rows Updated by 'Custom2' (LIKE): 124
Processing Mappings for Column 'UD3'
Data Rows Updated by 'Custom3' (LIKE): 124
Processing Mappings for Column 'UD4'
Data Rows Updated by 'Custom4' (LIKE): 124
Processing Mappings for Column 'UD5'
Data Rows Updated by 'Value' (LIKE): 124
Warning: Data rows with unmapped dimensions exist
Data Rows Marked as Invalid: 124
Warning: No data rows available for Export to Target
Total Data Rows available for Export to Target: 0
COMM Update Data - Update TDATASEG_T/TDATASEGW - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
COMM Update YTD Amounts - Update YTD Amounts - START
COMM Update YTD Amounts - Update YTD Amounts - END
ODI Hyperion Financial Management Adapter Version 9.3.1
Load task initialized.
LKM COMM Load Data into HFM - Load Data to HFM - START
Connecting to Financial Management application [EEHFM2] on [taly_cluster] using user-name [admin].
Connected to Financial Management application.
HFM Version: 11.1.2.1.0.
Options for the Financial Management load task are:
Load Options validated.
Source data retrieved.
Pre-load tasks completed.
HFM Log file path: "C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\aif_14HFM59238.log".
Load to Financial Management application completed.
Load task statistics - success-count:0, error-count:0
Cleanup completed.
Disconnected from Financial Management application.
LKM COMM Load Data into HFM - Load Data to HFM - END
ERPI Process End, Process ID: 14

The data load method for your target application should be set to "FDM" if you are going to be using FDM for your Data Load Rule imports. The Error in creating the DB link is due to the FDM Schema not being granted the DBLINK role in Oracle. In the FDM DBA Guide it explains that the FDM Schema must be granted the create DBLINK role when using the ERPi adapter.

Error while executing report : Error in program CL_RSR_RRK0_CURR

Hi Gurus,
I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
Please let me know if you have any solution on this.
A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not
permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in
the planning modeler, and if you can reproduce this termination, record a trace (transaction
RSTT).
For more information about recording a trace, see the documentation for the trace tool
environment as well as SAP Note 899572
Thanks,
Prasanna N.

Hi Prasanna,
Check the below SAp Note:
SAP Note : 1030657
Thanks,
Vijay.

Mapping executes without error, but does nothing.

I've created 21 mappings. 20 mappings work flawlessly and one gives me headaches!
The mapping is from type: PLSQL.
It's using an external table to access an 554MB textfile. The OS is RedHat Enterprise Linux WS release 3, Oracle 9.2.0.5, OWB 9.2 + latest patch.
When I validate the mapping -> everything is okay.
When I execute the mapping via OEM -> Success message -> in audit browser: 0 rows inserted.
When I execute the mapping manually -> Success message -> 0 rows inserted.
When I look at the target table -> 0 rows.
When I do "select count(*) from external_table_20", I get the correct count for records!
When I do "create table temp1 as select * from external_table_20 where 1 = 0" I get the correct table structure.
When I do "insert into temp1 select * from external_table_20", sqlplus blocks for about 10 seconds, but then there are 0 records inserted.
There are no errors in the kernels logfiles (no read, write or media errors).
There is no error message in SQLplus.
There is no entire in the alert file of the database.
It just does nothing!
I drop the mapping, the target table and the external table -> and recreated them again (one at a time) -> Same as above. I can count the external_table but the mapping doesn't insert any data. I still can't insert the table on myself.
So, what can I do now? There is enough space on every tablespace left -> just in case I extended all of them to make sure there will be at least twice as much space as 554 MB (the size of the textfile).
Its ervy strange that there is not a single error message or warning!

Art,
The external tables are tricky because if you make one trivial mistake when describing the records (such as a wrong field length or type), the end result will be that the query against the FT will return no errors, but there will be zero or some weard number of records returned. I suggest to check again the record description and to try to select from the external table (after it is deployed) from SQL plus.
Also, when configuring the flat file in OWB you can define the log file that will trace FT creation errors during deployment and a Bad file name that will direct the database to write records not fitting into the FT definition to the location specified in 'Bad file name'.
These configuration parameters can be of help when struggling with the issues mentioned above.
Regards:
Igor

Executing query error: System error in program SAPLRRI2 and form REP_A

Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav Shah

Hi,
Try to regenerate the query in RSRT t.code.
   ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
                   2. 1117966
                   3. 1225856
Regards,
Siva.

EXECUTE IMMEDIATE ERROR ..

Kidnly somebody suggest me how to wirte below query in execute immediate in pl/sql block as it throwing below error
CREATE OR REPLACE PROCEDURE LBA_NORTH
AS
BEGIN
execute immediate ( 'CREATE TABLE LBA_ALERT(DATE_CRT,DIST_MSISDN,FOS_MSISDN,RT_COUNT,RT_SERIES)TABLESPACE PRTP_INDX1 AS
SELECT TO_CHAR(LMA.DATE_CRT,'DD-MON-YY'), LMP.DIST_MSISDN,LMA.FOS_MSISDN,COUNT(LMA.RT_MSISDN)RT_COUNT,
RTRIM (xmlagg (xmlelement (e, LMA.RT_MSISDN || ',')).extract ('//text()'), ',')AS RT_SERIES
FROM LBA_Mapping LMP,LBA_Master LMA
WHERE LMP.DIST_MSISDN=LMA.DIST_MSISDN
GROUP BY LMP.DIST_MSISDN,LMA.FOS_MSISDN,TO_CHAR(LMA.DATE_CRT,'DD-MON-YY')');
END;
LINE/COL ERROR
5/30 PLS-00103: Encountered the symbol "DD" when expecting one of the
following:
) , * & | = - + < / > at in is mod remainder not rem => ..
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
The symbol "," was substituted for "DD" to continue.
5/39 PLS-00103: Encountered the symbol "),
LMP.DIST_MSISDN,LMA.FOS_MSISDN,COUNT(LMA.RT_MSISDN)RT_COUNT,
" when expecting one of the following:
. ( ) , * @ % & | = - + < / > at in is mod remainder not rem
LINE/COL ERROR
=> .. <an exponent (**)> <> or != or ~= >= <= <> and or like
LIKE2_ LIKE4_ LIKEC_ between || member SUBMULTISET_
The symbol "(" was substituted for "),
LMP.DIST_MSISDN,LMA.FOS_MSISDN,COUNT(LMA.RT_MSISDN)RT_COUNT,
" to continue.
6/65 PLS-00103: Encountered the symbol "/" when expecting one of the
following:
( - + case mod new null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current max min prior sql stddev sum variance execute
LINE/COL ERROR
forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
<an alternatively-quoted string literal with character set
specification>
<an alternatively-quoted SQL string>
6/72 PLS-00103: Encountered the symbol "), " when expecting one of the
following:
. ( ) , * % & | = - + < / > at in is mod remainder not rem =>
.. <an exponent (**)> <> or != or ~= >= <= <> and or like
LINE/COL ERROR
LIKE2_ LIKE4_ LIKEC_ between || member SUBMULTISET_
Edited by: user3558544 on Mar 28, 2013 4:52 AM

And by the way...
user3558544 wrote:
Kidnly suggest immediately
This is a forum of volunteers who have their own jobs to do. Suggesting they respond immediately or ugently is considered downright rude, not just to those volunteers but also to all the other people who would like a quick answer to their questions (but who haven't been rude).
Read: {message:id=9360002}

OWB execute mapping error

I am getting the following error in OWB when I try to execute the mapping.
“RTC-5006: an error occurred during execution. The exception was oracle.wh.service.sdk.runtime.queryException: null
<Map_Name> has not been deployed.”
I have deployed the mappings and process flow and the deploy status is "success"
This was working fine until I purged the deployment data through repository browser yesterday
We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Redhat Linux.

Somehow my 'REP_OWNER' got completely corrupted. I used following steps to resolve the issue.
1. Create a new repository called REP_OWNER2.
2. Delete an old repository (REP_OWNER) using ‘Repository_Assistant’ which also deletes the related roles pointing to REP_OWNER from each target schema (ex: STAGE, EDW, DM).
3. Manually delete all synonyms and WB_RT_VERSION_FLAG table from each target schema pointing to REP_OWNER.
4. Register all the target users from the Design Center.
5. First, import all the locations into the new repository (REP_OWNER2) from a backup .MDL file and register all of them. Then import rest of the stuff like database modules, file modules, process flows, pluggable mappings.
6. Configure all the database and process flow modules to their proper locations.
7. Deploy and execute.
Thanks
Bo

Executed CheckFlightSeatAvailability error

Similar Messages

Maybe you are looking for