Exit from a Form in enter_query
hi there
i have a form (form6) with a master-detail.
the 2 blocks are table-based.
when the form open, it must be in enter_query mode, so in when-new-form-instance i wrote an enter_query.
how can i manage the exit form when it's in enter_query mode?
now i should press the key-exit 2 times...
thank you
Hello
after few attempts (the message "query cancelled" was still appearing), i solved putting this code in the key-exit trigger of the master block
declare
msglvl varchar2(3);
begin
msglvl := :system.message_level;
:system.message_level := 20;
if :system.mode = 'ENTER-QUERY' then
exit_form(NO_VALIDATE,FULL_ROLLBACK);
end if;
:system.message_level := msglvl;
EXIT_FORM(ASK_COMMIT,FULL_ROLLBACK);
end
thank you all
Similar Messages
-
Exiting from a FORM while pressing ESC key !
Hiiiiii !
I am using Forms 6i. Is there any way that i may exit from a form while just pressing the ESC key ?
Capri !
Message was edited by:
Capriwhen you start your runform via
ifrun60.EXE myForm pa_username=myUser
you can use this parameter for your new Resource-File, which you have saved from within Oracle Terminal :
ifrun60.EXE myForm pa_username=myUser term=myTermFile.res
try it
Gerd -
How to abort exiting from a form
Hi.
I want to popup an Alert message which ask the user if he realy want to exit the Oracle Forms application. If he press 'NO' button I want to return to the aplication.
I realize that I have to use POST-FROM triger to popup the alert message. I then don't know how to unvalidate the user exit.
Any hint / example?
Regards,
DezoYou van try this in Post-Form trigger:
DECLARE
alert_button NUMBER;
al_id Alert:= Find_Alert('your_alert');
BEGIN
Set_Alert_Property(al_id, alert_message_text,'Do you want to exit ?');
alert_button := Show_Alert(al_id);
IF alert_button=ALERT_BUTTON1 THEN
DO_KEY('Key_Exit');
ELSE
RAISE Form_Trigger_Failure;
END IF;
END; -
Error when exit by 'X' from called form
I am in a form and I call another form. I delete something on the called form then click the 'X' in the right hand corner of the form without saving my change first - a message is displayed QMS-00158: Do you want to save your changes? When I click on 'Yes' a window appears with a title that says 'Errors and Warnings in this transaction' with no other information - when I select 'OK' the window remains displayed and a message at the bottom of the screen says "FRM-40738 Argument 1 to builtin GO_BLOCK cannot be null" - the only way to close the window is to click on the called form and exit it then everything is OK.
If I save my changes first everything is fine - it is only when I try to exit the called form before saving that this happens.
Any ideas of why?Hi Pradeep,
I am facing the same issue, Can you please give me some inputs on this..
Thanks in Advance.
Thanks,
Amita -
EXPORT to text or CSV format from a form
Dear all,
Could you please help me to export the data from my form to a text file or to a csv format. I am very new to forms.
i need to export the data from the oracle form to a text file or CSV file format.
I had created form named as form1.
In form1 i have a block named as block1. In this block i have 4fields as field1, field2, field3, field4. using a tabe1 which has the same 4fields.
This form is in tabular form.
Example:
In the form i have data like as below and i got this data from table1. I used a execute query to get the data from the table into this form.
field1 field2 field3 field4
raj 1234 abc 510
dil 777 hi 787
Now my requirement is i need to export this data into a file, when i click on a button(Export) it has to browse for a folder on my desktop and i have to name the filename to save the data.
Please help me.
Thanks in advance.This should be almost same as in your previous task for import data.
Try this:
DECLARE
v_file_name VARCHAR2 (100);
v_file client_text_io.file_type;
v_delimiter VARCHAR2(1) := ',';
BEGIN
v_file_name := webutil_file.file_save_dialog;
v_file := client_text_io.fopen (v_file_name, 'w');
GO_BLOCK ('block1');
FIRST_RECORD;
LOOP
client_text_io.PUT_LINE(v_file, :block1.field1||v_delimiter||:BLOCK1.field2||v_delimiter||:BLOCK1.field3||v_delimiter||:BLOCK1.field4);
IF :SYSTEM.LAST_RECORD = 'TRUE' THEN
EXIT;
END IF;
NEXT_RECORD;
END LOOP;
client_text_io.fclose (v_file);
END; -
How can I remove my company’s iCloud Contacts account from a former employee's iPhone and have the current information removed from their iPhone at the same time as well? Will just changing the iCloud password be enough? Our company shares an iCloud account for convenience but when someone leaves we don't want the information to stay on their iPhone.
Changing the password would only block them from accessing the iCloud information. They would still have access to the local copy on thier phone. To delete the local information, you would need to go to Settings>iCloud on the phone, tap Delete Account, then choose Delete from My iPhone. (This only deletes the iCloud account and data from the phone, not from iCloud.) This, obviously, must be done during the exit process as it requires access to the phone.
-
Passing a parameter from one form to another
Hi
I'm trying to pass a parameter from one form to another. I've read lots of postings about this, and I have succeeded in calling the second form using code behind one of the existing Portal buttons (insert). Here is the code:
DECLARE
pro_id NUMBER;
pro_link VARCHAR2(1200);
BEGIN
pro_id := p_session.get_value_as_number(
p_block_name => 'DEFAULT',
p_attribute_name => 'A_PRO_ID');
pro_link := portal30.wwv_user_utilities.get_url(
'CINTRA_APP.PRO_LINK_1',
'WKG_PRO_ID',pro_id,
'_WKG_PRO_ID_cond','=');
PORTAL30.wwa_app_module.set_target(pro_link,'CALL');
END;
Trouble is, the parameter does not get passed. This could be because:
the field I'm trying to populate is based on an LOV ?
the target form is not set up to receive parameters? (I read this somewhere, but how do you do it?)
Thanks
ManfredDear InoL
My Header Form coding as follows.
When I press the button to move to the lines the following code executes
PASSING FORM CODING;
DECLARE
pl PARAMLIST := GET_PARAMETER_LIST('PL_AT');
BEGIN
IF NOT ID_NULL(pl) THEN
DESTROY_PARAMETER_LIST(pl);
END IF;
pl := CREATE_PARAMETER_LIST('PL_AT');
ADD_PARAMETER(pl,'P_AT',TEXT_PARAMETER,:HWSI_ASSET_TAG);
CALL_FORM('E:\IT_SYSTEM\6i\HWDYNAMICINFO.FMX',NO_HIDE,DO_REPLACE,NO_QUERY_ONLY,PL);
END;
RECEIVING FORM CODING;
Written on WHEN_NEW_FORM_INSTANCE
BEGIN
IF :PARAMETER.P_AT IS NULL THEN
GO_ITEM('NZK_HW_DYNAMIC.OS_ASSET_TAG');
ENTER_QUERY;
ELSE
SET_BLOCK_PROPERTY('NZK_HWSTATIC_INFO',DEFAULT_WHERE,'HWSI_ASSET_TAG ='||:parameter.p_at);
SET_BLOCK_PROPERTY('NZK_HWSTATIC_INFO',DEFAULT_WHERE,'HWSI_ASSET_TAG ='||:parameter.p_at);
EXECUTE_QUERY;
GO_ITEM('NZK_HW_DYNAMIC.OS_ASSET_TAG');
END IF;
END;
Created PARAMETER as P_AT, Data Type CHAR, MAX LENGTH 30
Thank you
NZK -
Frm-92101 happens when I open a form from another form and close it.
Frm-92101 happens when I open a form from another form, check something, show a message to the user and exit the form to the previous form.
Forms version: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6
When I put before the "EXIT_FORM" two messages, everything is fine and the second form is closed and I repeat to the first form just as I wanted.
In forms 9.0 it didn't happen.
Does it have a connection with the fact I use JRE instead of JInitiator?
Thank you.>
There are numerous causes of the FRM-92101 error. I recommend you start your investigation by tracing your Forms session so you can see what your form is doing when the error occurs. Check out My Oracle Support document How to Use Forms Trace with Forms [ID 209372.1] for information on how to enable the trace. Also, take a look at My Oracle Support document Known Causes of FRM-92101 Error In Forms [ID 604633.1].
Hope this helps,
Craig
>
I have just found that there is a "Synchronize" command in one of the main attached libraries, and when I comment that command the application works well. But I don't want to comment it because it's a great library and I assume it has a part in the system.
I have discovered that in the new Forms' help, the fact that the System.Current_Item mustn't be null so the command "Synchronize" will work, is mentioned. In the old Forms' help, that fact is not mentioned.
So I tried to put it inside a condition that checks if the current item is not null, but the compiler doesn't recognize the "current_item". I don't know why. Because it's a library? So how can I check this? I can sent it as a parameter, but I don't want. Do you know something about it? Thank you. -
Making Web Service calls from a Form in the WorkSpace
I am getting conflicting information about this, so I hope someone here could clarify it. TIA.
This is what I want to do:
after a form is displayed/launched in the WorkSpace,
when the user Tabs out of a field (Exit event) on the form,
I want to make a Web Service call from the form,
get the result from the WebService,
and use the Result to populate another field on the form.
I know for certain that this works if I Reader-Extend the form,
and I set the JavaScript at the Exit event (to execute WebService call)
as "Run At Client".
The question is:
can I make the WebService calls without Reader-Extending the form???
I have been told that, yes you can,
but *only if* you let the JavaScript "Run At Server".
I tried that, but it caused the Reader to crash.
Some other people told me,
no you can not,
even if you "Run At Server", the form still needs to be Reader-Extended,
when using it in the WorkSpace environment.
So, what is the truth? can someon tell me?
Can I make WebServers calls from the Server-side at all?
Do I really need to Reader-Extend the form even if calling it from server side?
What exactly is it SUPPOSED to work?
thanksyes, thank you both. I got the fix from Adobe Tech Support last week. It's working.
The fix I got included a rather complex looking "Submit Service" though. Makes me wonder how a regular user would know that he needs to write such a Submit Service?? and even if he knows that he needs a special Submit Service, would he know how to write it??? I found no documentation for this type of things either.
Shouldn't this solution be published somewhere in Adobe's website? Dev Lab perhaps? -
Calling SQL Loader using HOST command from Developer Forms 4.5
I want to execute a set of code from D2K Forms 4.5 which has interfface with Client - OS ( In my case Windows NT/XP). I want to execute SQL Loader from Forms using Host Command and then after completion of that process, I want to do next transcations ( depending upond success of HOST/SQL Loader).
How to achive this?
I tried writing code like this ...
l_vc_command := 'sqlldr73'
||' USERID='||l_vc_username||'/'||l_vc_password||'@'||l_vc_connect_string
||' CONTROL='||l_vc_filepath||'Upload.ctl'
||' DATA='||LTRIM(RTRIM(l_vc_fileloc))
||' LOG='||l_vc_filepath|| l_vc_log_file || '_' || l_dt_sysdate_str ||'.log'
||' BAD='||l_vc_filepath|| l_vc_bad_file || '_' || l_dt_sysdate_str ||'.bad'
||' DISCARD='||l_vc_filepath|| l_vc_discard_file || '_' || l_dt_sysdate_str ||'.dsc';
HOST(l_vc_command,NO_PROMPT);
After this command i want to do some other code execution. so even if it fails or success, next code is executed. How to control this?
Please help..
Regards,
MilindForms6i running on W2000, Rdbms 8.1.7
in Forms I added a button TEST,
Trigger when-button-pressed : host('test.bat') ;
in directory .......\frm I added file test.bat :
REM ===============
cd /d C:\........\ldr
pause
sqlldr parfile=test.par
pause
type test.log
pause
exit
REM ================
now, pressing TEST button opens DOS window, telling me what's going on, running sqlldr, finally going back to forms
Are you using NO_PROMPT or NO_SCREEN option of HOST command ?
Had a look at Forms 4.5 manuals, there is no mentioning of (a)synchronously operation in connection with HOST command. -
Call Oreacle report from Oracle form
Hi,
I need call a Oracle report from Oracle Form and found the the following procedure from this forum. I have 2 parameters 'start_date' and 'end_date' passing to called report. The following example just have onle parameter
'departmentno' passing. Is that mean I need to call add_parameter twice like the following?
add_parameter(plid, ''start_date' , TEXT_PARAMETER,:control.start_date);
add_parameter(plid, ''end_date' , TEXT_PARAMETER,:control.end_date);
In the following example:
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
Thanks for clarification!!
Michael
PROCEDURE pass_parameter
IS
plid paramlist;
the_param varchar2(15) := 'tmpdata';
BEGIN
plid := get_parameter_list(the_param);
/* check if 'tmpdata' exists */
IF NOT id_null(plid) THEN
destroy_parameter_list(plid);
END IF;
/* if it does destroy it */
plid := create_parameter_list(the_param);
/* create it afresh */
add_parameter(plid, 'departmentno', TEXT_PARAMETER,to_char(:dept.deptno));
/* associate the param in the form with the param in the report */
add_Parameter(plid, 'PARAMFORM', TEXT_PARAMETER, 'NO');
/* to suppress the parameter form displaying */
run_product(REPORTS, /* product name */
'formrep.rdf', /* Oracle Reports module */
SYNCHRONOUS, /* communication mode */
RUNTIME, /* execution mode */
FILESYSTEM, /* location of the Reports module */
plid, /* handle to the parameter list */
null
END;this my code on when_button_press
declare
rec_grp recordgroup;
col1 groupcolumn;
col2 groupcolumn;
col3 groupcolumn;
col4 groupcolumn;
col5 groupcolumn;
col6 groupcolumn;
col7 groupcolumn;
col8 groupcolumn;
pl_id paramlist;
i number :=1;
begin
rec_grp := find_group('emp_rec');
if not id_null(rec_grp) then
delete_group(rec_grp);
end if;
rec_grp := create_group('emp_rec');
col1 := add_group_column('emp_rec','Empno',CHAR_COLUMN,8);
col2 := add_group_column('emp_rec','Ename',CHAR_COLUMN,30);
col3 := add_group_column('emp_rec','job',CHAR_COLUMN,15);
col4 := add_group_column('emp_rec','Mgr',CHAR_COLUMN,8);
col5 := add_group_column('emp_rec','Hiredate',DATE_COLUMN,10);
col6 := add_group_column('emp_rec','Sal',CHAR_COLUMN,10);
col7 := add_group_column('emp_rec','comm',CHAR_COLUMN,10);
col8 := add_group_column('emp_rec','Deptno',CHAR_COLUMN,4);
loop
go_block('emp_r');
go_record(i);
add_group_row(rec_grp,i);
set_group_char_cell('emp_rec.empno',i,:emp_r.empno);
set_group_char_cell('emp_rec.ename',i,:emp_r.ename);
set_group_char_cell('emp_rec.job',i,:emp_r.job);
set_group_char_cell('emp_rec.mgr',i,:emp_r.mgr);
set_group_date_cell('emp_rec.Hiredate',i,:emp_r.Hiredate);
set_group_char_cell('emp_rec.sal',i,:emp_r.sal);
set_group_char_cell('emp_rec.comm',i,:emp_r.comm);
set_group_char_cell('emp_rec.deptno',i,:emp_r.deptno);
i := i + 1;
exit when :system.last_record='TRUE';
end loop;
pl_id := get_parameter_list('para1');
if not id_null(pl_id) then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list('para1');
add_parameter(pl_id,'Q_EMP',DATA_PARAMETER,'emp_rec');
add_parameter(pl_id,'paramform',text_parameter,'no');
run_product(REPORTS,'D:\ora\daily.RDF',synchronous,runtime,filesystem,pl_id,NULL);
end;
---------and this is my reprot query----------
select Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,Deptno
from emp
where empno=:emp_rec
order by empno;
but it show error at run time
Rep-1340
plzz solve this problem to me
fahad -
Different messages on COMMIT_FORM ,when form is opened from another form
hi,
problem is when open form from another form. After change some data and execute COMMIT_FORM, message is : No changes to apply.
Interesting is that when exit and open form again, changes is SAVED !?.
If open that form directly, message is that like should be ( Transaction completed...).
Has anyone idea where is problem?Hello,
While calling the form try with 'DO_REPLACE' option.
Thank U. -
How to exit from Enter-Query mode
Hi
I am not being able to exit from the Enter-Query mode if the result set is not returned.
I tried to exit using ABORT_QUERY, exit_form( as we used to do in earlier version) and CTRL+Q. Nothing seems to work and I have to kill the form
This seems to be an easy topic, but I need your help.
Thanks in advance
Bijay<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bj ():
Hi
I am not being able to exit from the Enter-Query mode if the result set is not returned.
I tried to exit using ABORT_QUERY, exit_form( as we used to do in earlier version) and CTRL+Q. Nothing seems to work and I have to kill the form
This seems to be an easy topic, but I need your help.
Thanks in advance
Bijay<HR></BLOCKQUOTE>you maybe include a not null item,you can set the item's property
not need .
null -
JEditorPane can't handle POST from HTML form?
I posted this before but i never got an answer so i'll try again :-)
Im running a tomcat server were i have a jsp script that uploads files to the server. What i need to do to is to use a regular java application for the rest of the "project" im working on.
And i can get the JSP page to be displayed properly using JEditorPane but i cant get the html FORM POST in the JSP to execute... i dont know if theres some limits in JEditorPane or if im just using the wrong type of approach on this one.
This is the server
http://chilly-schrimp.kicks-ass.org/uploadbean/SimpleUpload.jsp
(only works if my computer is turned on)
Heres the code:
=======================================================================
import javax.swing.*;
import javax.swing.event.*;
import java.io.*;
public class JSPtest {
public static void main(String[] args) {
JEditorPane pane = null;
try {
pane = new JEditorPane("http://chilly-schrimp.kicks-ass.org/uploadbean/SimpleUpload.jsp");
catch (IOException ex) {
ex.printStackTrace(System.err);
System.exit(1);
pane.setEditable(false);
// Add a hyperlink listener.
final JEditorPane finalPane = pane;
pane.addHyperlinkListener(new HyperlinkListener() {
public void hyperlinkUpdate(HyperlinkEvent ev) {
try {
if (ev.getEventType() == HyperlinkEvent.EventType.ACTIVATED)
finalPane.setPage(ev.getURL());
} catch (IOException ex) { ex.printStackTrace(System.err); }
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setContentPane(new JScrollPane(finalPane));
frame.setSize(350,400);
frame.setVisible(true);
=======================================================================
any suggestions??
thanx
/ericI am using request.getParameter(passed variable name)
to pass data from HTML form to JSP with no problem.
WHen I try to pass data from HTML form of
multipart/form-dta type to JSP as following:
< form enctype="multipart/form-data" name="theForm"
method="post"
ACTION="http://titan.ssd.loral.com:7778/ifs/jsp-bin/if
-cts/stringsecond.jsp">
The passed value is null. Why?because the jsp most likely does not handling of POST parameters like this.
How can I pass data successfully from this form to
JSP?jsp's are not meant to read such amounts of data. this (= uploading) is a typical task for a specialized servlet. there you have full control over input and output. if you need to, you can still forward to a jsp after processing in the servlet.
How can I pass data from JavaScript to JSP???? i'm not sure what exactly you mean. normally you put it into an url and submit it.
robert -
X crash the PC when exit from X (dixGetPrivateAddr: Assertion)
I installed Arch Linux on my new PC (had Arch on my 6 year old notebook for about 2 years) but each time I want to exit form X (KDE or TWN) crash the video output. The display switch to standby and the keyboard doesn't work any more, so I can't switch to a terminal.
My PC config:
Arch x86_64, new net installation up-to-date (pacman -Syu)
AMD X6, Radeon HD5830, dual head installation
I tried some AUR radeon-git driver (a lot of artefacts, exit from X works) , catalyst (closed source , radeon r300g on my notebook just rocks ). After all this installation of different drivers I set a new Arch Linux installation up (no KDE, only TWN). But the problem remains. With a remote ssh login I can access the crashed PC and shut it down or restart X and X starts again (now I can switch to a terminal until I exit again from X).
Terminal output when I start X over ssh:
abc@xsix ~]$ su root
Passwort:
[root@xsix abc]# startx
X.Org X Server 1.9.2
Release Date: 2010-10-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.35-ARCH x86_64
Current Operating System: Linux xsix 2.6.36-ARCH #1 SMP PREEMPT Sat Jan 8 14:15:27 CET 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/ed0f04ab-b16c-4a11-8c1b-175c25f7ddb1 ro
Build Date: 01 November 2010 10:29:19PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 15 00:24:48 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 4 (Unterbrechung während des Betriebssystemaufrufs) on X server ":0"
after 1027 requests (1027 known processed) with 2 events remaining.
X: ../../../include/privates.h:122: dixGetPrivateAddr: Assertion `key->initialized' failed.
[root@xsix abc]#
Xorg log:
http://archlinux.pastebin.com/MaBAbWJL
no EE errors
Xorg config:
[root@xsix log]# cat /etc/X11/xorg.conf.d/20-radeon.conf
Section "Device"
Identifier "HD5830"
Driver "radeon"
EndSection
[root@xsix log]#
radeon is in /etc/rc.conf under MODULES and dbus is in DAEMONS, late KMS enabled.
Has someone an idea to solve this problem or has/had a similar problems with X,radeon,...? Any piece of information is welcome.
Last edited by devnow (2011-01-15 00:03:40)After add Repo from https://bbs.archlinux.org/viewtopic.php?id=79509 and install
- dri2proto-git
- glproto-git
- libdrm-git
- mesa-full (replaces mesa, libgl and ati-dri)
- mesa-demos-git (optional: needed for glxinfo and glxgears)
- mesa-full-gallium (optional)
- xf86-video-ati-git
with Kernel 2.6.37 from testing (kernel26-drm-radeon-testing and linux-firmware-git not installed)
X don't crash any more
But exit from X isn't clean compare last few lines:
[root@xsix abc]# startx
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.36-ARCH x86_64
Current Operating System: Linux xsix 2.6.37-ARCH #1 SMP PREEMPT Fri Jan 7 17:32:33 CET 2011 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/ed0f04ab-b16c-4a11-8c1b-175c25f7ddb1 ro
Build Date: 08 January 2011 11:24:47PM
Current version of pixman: 0.20.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 15 16:56:08 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
(II) [KMS] Kernel modesetting enabled.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
xinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 4 (Unterbrechung während des Betriebssystemaufrufs) on X server ":0"
after 1354 requests (1354 known processed) with 2 events remaining.
Now I will install KDE again and hope there are no wired artefacts with this driver.
Btw, is it possible to move this topic to Desktop Environments?
Maybe you are looking for
-
Internal speakers no longer available under 10.4.8
After I updated to 10.4.8, my computer seemed fine, and I was able to play sound, until I restarted it. Now it doesn't regonize my internal speakers. When I try to play anything, the red light in the sound out jack comes on. (any there is sound if I
-
what happend to the confetti and the water droplet transitions? I can't find them in the 09 version of keynote?
-
What's up with all of the additional charges to the bundle price?
My bundle price was quoted at $117 per month but there is about $50 in charges added to that for the final bill. How did I fall for this, and what questions did I miss asking when I signed up? Thanks for the feedback.
-
My time capsule sometimes makes whining noise
my time capsule sometimes makes a whining noise
-
Opening existing project with PRE 9
I have Premier Elements 9.0. When I start PRE and try to open a saved project, all I get is an empty window. The only way I can open an existing project is to first start a new one, then open the existing one from the File menu. I don't know if it's