Exit or BADI for Profit Center Block in Tcode KE51 , KE52

Dear all,
Is there any BADI or User Exit available to block Profit Center during create or change.
Thnaks in advance.

You can go for implicit enhancements.In case no badi or exit is avaiable.
Regards,
Nabheet Madan

Similar Messages

Restricting Creation/Update of Profit Center Master Data through KE51/KE52

Hi,
I have a scenario where profit center master data is maintained in MDM which acts as central repository and the master data is syndicated from MDM to ECC through PRCMAS IDoc. Business requirement is that since MDM is acting as central repository creation/update for profit center through transactions KE51/KE52 should be restricted in ECC. I know that through roles we can restrict user to create profit centers but is there any way/configuration steps which we can perform to restrict user to create profit centers through transaction and I also want to know if that process would affect the creation/updation of master data through PRCMAS IDoc.
Thanks,
Amit

Hi,
As I told you can go forward using SetID but for that you have to create the SET than assign it to a table and also have to cutomize a standard FM.
Meanwhile I will tell you a easy way you can opt for Transaction Variant usinh SHD0 where dont give the option to save so that no user can create any Profit Centre and than assign that Tcode to the users.
Its a simple way hope it helps you.
Thanks
Arbind

Request for User Exit or BADIs for outgoing posting block in F-53

Dear Gurus,
Can somebody advice me which user exit or BADIs to use for the below scenario:
My users is using more than one alternative payee for their invoices, therefore when they use F-53 to clear open item, they always accidentally do multiple payment for document no. with different alternative payee. Worst case is that the posting go through! But when they print out the form, its too late and they had to do reversal.
I like to enforce a block so that if the alternative payee is different across the document no. selected, they cannot post.
Desperately,
Belinda
Edited by: Belinda Lee on Jun 3, 2008 5:34 PM

Hello,
You can use Business Transaction Event (BTE) . You should use 00001120 events.
You must do some customizing in FIBF.
Regards,
Burak

BADI for Profit Center Substitution

Hi,
Please suggest some BADI which can be used to subtitute the Profit Center in the Vendor Line items which posting the document.
we tried AC_Document, but unable to trigger the breakpoint at the time of document posting.
Thanks
Mohit

HI,
Another option.
1. User Constants
2. FAGL3KEH defualt profit center.
Reg
Madhu M

User Exit or BADI for payment block in MIRO

Hi all,
I need a User Exit or BADI for payment block in MIRO for line item. please help.
Thanks
babu

Hi,
Check the components in enhancement "LMR1M001".
Regards
Vinod

Reporting - restricted for profit center-wise

Hi
My client has two profit centers (1000 and 2000) in one company code. Both profit centers are totally independent. Now my client requirement is that when user of profit center 1000 runs AR01 (i.e. asset balances), he should be able to see assets only for his profit centers i.e. 1000. Asset of profit center 2000 should not appear in that report.
In EHP 4, there is provision for Profit Center-wise document posting, change and display functionality. But i want to know if this profit center-wise authorization will work for asset balances report (AR01) and other assets reports also.
Please help.
Edited by: Deepak Agrawal on Jan 1, 2012 5:43 PM

K_PCA or authorization object for profit center is not check in assets report.
In AR01 you cannot restrict the results to profit center as it is not checked in authorization . The fields which are checked are company code , Asset class and asset views.
Hence you will have to lookup for alternatives like selection based on plant or cost center or responsible cost center etc.
In case if the requirement is a show stopper then you will have to code the things in Enhancement points as there are no BADI or Exits available for the same .
Cheers,
Dewang

Cost component split transfer for Profit center valuation in ke27

Dear All,
We have activated multiple valuation/transfer prices. Material ledger is also activated.
We want to transfer cost component split to CO-PA by ke27.
We have defined separate costing keys for access to actual cost estimate for legal and profit center valuations.
But cost component split transfer to COPA works only for legal valution. Even we have defined type of valution for profit center costing key -transfer cost component split and total costs.
What should be else customized to transfer cost components splitting in profit center valuation to CO-PA from actual cost estimates?
With best regards,
Kamila.

Hi,
I have assigned the same value fields used for legal valuation to column 2, which was pointed in message.
But now I got following message in ke27:
For actual data, value fields that were already populated before CO-PA valuation cannot be changed in valuation.
1. As a rule, value fields that were filled before CO-PA valuation - be it from SD or by a manual entry of a line item - can only be changed by means of user exits.
(Note that for plan data, CO-PA valuation always has priority over the values planned manually.)
2. The valuation steps in a CO-PA valuation strategy are numbered sequentially. These numbers determine the order in which the steps are carried out within that strategy. As a rule, value fields populated in one step can be used as a basis for calculating values for other value fields in a subsequent step.
Value fields that were populated in a previous step are generally not overwritten by subsequent steps.
The exception to this are steps that use a CO-PA user exit. User exits let you change individual value fields.
3. If you valuate using multiple material cost estimates simultaneously, this means that the values of different cost components within the same cost estimate are aggregated and then entered in one CO-PA value field. However, value fields that already contain data from a previous cost estimate are not overwritten by a later cost estimate. Consequently, you should assign value fields in Customizing so that the values of different cost estimates are entered in different sets of value fields.
4. When condition values are transferred to CO-PA value fields, note that condition types that are assigned to the same value field are added together. This is also the case when the condition types come from different costing sheets within the valuation strategy.
So does it mean we should define separate value fields for PC valuation?
With best regards,
Kamila.

User Exit or BADI for ME21N

Hi All,
We are in a situation where in we need to Change the Distribution Channel in the Shipping tab of ME21N transaction.
Previously, the distribution channel is being picked up form the config (SPRO - Shipping data for plant) but before it picks up from the config we need to change it and update the other distribution channel in the PO.
We have tried with most of the User exits and BADIs but all of those are of no use for our requirement, as these user exits and badis are triggered after we click on save button. But we need to change the Distribution channel at the point of determination of Shipping data by the system i.e. before save.
Can any one please help me out with this situation with some User exits or BADIs that are triggered before save button.
Note: The Shipping data is in EKPV table. We need to change the VTWEG field in EKPV.
Thanks in Advance,
Asif Ali Khan

Asif,
see these are Exits and BADI for ME21n,
Enhancement/ Business Add-in            Description
Enhancement
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
MRFLB001                                Control Items for Contract Release Order
LMEKO001                                Extend communications structure KOMK for pricing
LMEKO002                                Extend communications structure KOMP for pricing
MM06E011                                Activate PReq Block
AMPL0001                                User subscreen for additional data on AMPL
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
M06B0003                                Number range and document number
M06B0002                                Changes to comm. structure for purchase requisition release
M06B0001                                Role determination for purchase requisition release
Business Add-in
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
ME_PO_PRICING                           Enhancements to Price Determination: Internal
ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
SMOD_MRFLB001                           Control Items for Contract Release Order
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_PURCHDOC_POSTED                      Purchasing Document Posted
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_BSART_DET                            Change document type for automatically generated POs
ME_BAPI_PR_CREATE_02
ME_BAPI_PR_CREATE_01
ME_BAPI_PO_CREATE_02
ME_BAPI_PO_CREATE_01
ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN                    Commitment for return item
ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_OA                             Check BAdI for Contracts
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
Amit.

Profit Center blocked error in depreciation run

We are upgrading SAP system from 4.6 to 6.0. It was noticed that Profit Center blocked error is being captured in depreciation run test run in the upgraded version. In 4.6, this error is not being captured. Is this an enhancement in the upgraded version?

I have not search information about it. I found this change only positive. Now you have direct to solve the error (wrong profit center) and not later with the retirement. It is only when they block profit centers or assign an other profit center to a cost center that they have to contact asset accounting for changing the asset. In the old version the values on the profit center where wrong, now you have to correct them. I see this more as a bug in the old version that is solved now.
When you don't want this have a look to the error message and turn it of when that is possible, but then you accept that the vallues in profit center accounting are wrong

User Exit or BADI FOR ME59N

Hi All,
   My requirement is in ME59N if Document Type is ZCD or ZSD it should not consider the Rounding Value (MARC-BSTRF) which is coming from Materrial Master (MRP1 View) and Purchase Info Record (EINE-RDPRF) which is coming from Purchase Info Record(ME12 or ME13), Can any one suggest me the right User Exit or BADI for this, Please go through the requirement.
Regards,
Sudhakar .A
Edited by: Sudhakar Allam on Feb 5, 2010 4:31 AM

HI Sudhakar ,
                          These are the list of enhancements and Badi's available for ME59N ,
MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
MM06E001                                User exits for EDI inbound and outbound purchasing documents
MM06E003                                Number range and document number
MM06E004                                Control import data screens in purchase order
MM06E005                                Customer fields in purchasing document
MM06E007                                Change document for requisitions upon conversion into PO
MM06E008                                Monitoring of contr. target value in case of release orders
MM06E009                                Relevant texts for "Texts exist" indicator
MM06E010                                Field selection for vendor address
MM06E011                                Activate PReq Block
MMAL0001                                ALE source list distribution: Outbound processing
MMAL0002                                ALE source list distribution: Inbound processing
MMAL0003                                ALE purcasing info record distribution: Outbound processing
MMAL0004                                ALE purchasing info record distribution: Inbound processing
MMDA0001                                Default delivery addresses
MMFAB001                                User exit for generation of release order
AMPL0001                                User subscreen for additional data on AMPL
MRFLB001                                Control Items for Contract Release Order
LMEDR001                                Enhancements to print program
LMELA002                                Adopt batch no. from shipping notification when posting a GR
LMELA010                                Inbound shipping notification: Transfer item data from IDOC
LMEQR001                                User exit for source determination
LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001                                Customer-Specific Source Determination in Retail
M06B0001                                Role determination for purchase requisition release
M06B0002                                Changes to comm. structure for purchase requisition release
M06B0003                                Number range and document number
MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
MEETA001                                Define schedule line type (backlog, immed. req., preview)
ME590001                                Grouping of requsitions for PO split in ME59
M06E0005                                Role determination for release of purchasing documents
M06E0004                                Changes to communication structure for release purch. doc.
M06B0005                                Changes to comm. structure for overall release of requisn.
M06B0004                                Number range and document number
The list of Badi are
ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
ME_PO_PRICING                           Enhancements to Price Determination: Internal
ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
ME_PURCHDOC_POSTED                      Purchasing Document Posted
SMOD_MRFLB001                           Control Items for Contract Release Order
EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
ME_REQ_POSTED                           Purchase Requisition Posted
ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
ME_BSART_DET                            Change document type for automatically generated POs
ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Leve
MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKK
ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
ME_COMMITMENT_RETURN                    Commitment for return item
ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
ME_CHECK_OA                             Check BAdI for Contracts
regards.

How to create master data source for Profit center group in source system

Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too.
Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this information?
Many thanks
rajatina.

HI ,
It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
Here ais note from the forums to get profit center group from table
From Table SETLEAF, Field SETCLASS = '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
You will get Group name in Field SETNAME.
Regards,
Sathya

Report Painter Report for Profit Center

Hi All,
I am creating a report for profit center in GRR1.I was using library 8A3,& ledger 8A.which uses for PCA line i tems and table used is GLPCT.which shows profit center totals by period.I ran GLPCT in SE16 and found out No data selected.I see that profit center accounting is not active in my system ECC6.0
and I didn't see any line records for profit center in any of the profit center tables.GLPCA.Now if someone knidly suggets me how to achieve this report, can I still do it profit center wise or not? which library should i use in GRR1.The layout of my report is as under.Thanks
CURRENT MONTH*
Current Yr      Current Yr    Prior Yr
Actual            Budget        Actual          Variance
YEAR TO DATE
Current Yr      Current          Prior Yr        Annual
Actual            Budget        Actual           Budget    Variance
Regards
Shaun

Thanks Abhijit , I can now see my report group at the bottom of the list .I assigned you full points.I posted another question regarding report painter .If you could also give me some guidance on that.When I was creating rows and updating cost elements with account numbers.I set up 3 revenue accounts and then ran the report to see if I get any data for profit centers.I did get data but when I double clicked on one of the account,it displays this messsage.I read the msg. but could not make any sense with it.for example in definning row I put account number from/to 400000- 400000    Explode. and thats a characteristic.
No valid master data for characteristic 'Account Number'
Report MEG1 does not contain any data pages.
No valid master data for characteristic 'Account Number'
Message no. GR633
Diagnosis
No valid master data within the specified interval was found for the characteristic 'Account Number'.
Explanation:
For each characteristic that is processed in a report, the Report Writer optimizes the interval limits which are relevant for selecting data from the database.
Example:
A report contains the characteristic 'account', for which an account interval from 100000 to 200000 has been entered. However, if the master data validation shows that the lowest/highest account in this interval is 110000/190000, the selection will be limited to accounts 110000 to 190000 only.
The system returns this error message if no master data exists for the interval.
This error is typically caused by an invalid version. In FI-SL Special Purpose Ledger, for example, versions are assigned to the ledger and are defined in configuration. The report definition can then contain a non-defined version. A similar situation applies to controlling (cost center accounting): here, versions are assigned to the controlling area and fiscal year and can be defined in planning.
Another cause of this error is a ledger that is not assigned to the table for which the report was created.
Technical information:
The field name for 'Account Number' is 'RACCT'.
System Response
The system cancels processing.
Procedure
Check the report definition, or the specified master data, or the intervals.
Regards
Shaun

How i create choose from list for profit center

Hello ALL ,
Can any body suggest me how we create the CFL for profit Center .
I am creating add -on using sdk and create a screen form using screen Painter .
In my form there is matrix that contain the profit center column just like in sale order screen .
In this field (Profit Center ) I want to attach the CFL of profit center just like in sales Order screen .
but I am unable to find out the object type ID for profit center so please give me any idea

Hi,
Please post is on the SDK forum and close this thread. This is an SDK question.
Thanks,
Gordon

Need exit or Badi for updating Warranty data in IE02 while Prod Order conf.

Hi All,
I need a user exit or Badi for updating the Warranty data in IE02(Equipment Master) while production order confirmation(CO15)?
I need to update the Begin guarantee date from Production order and warranty master type in IE02 while confirming the production order.
Thanks,
Sudha

Hi,
Are you saying first create notification,then service order
and then Sales order.
But the requirement is create notification then sales order and when you go in va02 and while modifying the sales order and create service order.
Thanks & regards,
chetan.

User Exit or BADI for Material,BOM,Customer,Vendor

Dear All,
I have requirement where if User A changes a Material X .It should go for approval by workflow.
When the Material X is waiting for approval no other User should be able to change the material .It should give him a message
and restrict him from changing the Material.
Is there any User Exit or BADI to restrict him from changing the material. The exit or BADI should be called as soon as the Material is entered in MM02.
I need exit or BADI for BOM, Vendor and Customer also.
Thank you.

Hi,
You can go to Transaction SE80 and check in Function Group MATF. There have been two User Exits which are called during MM02 Transaction execution (via Analysis Transaction SE30) - MATERIAL_FIELD_SELECTION_NEW and MATERIAL_FIELD_SELECTION_COMB.
BAdI called by FM MATERIAL_FIELD_SELECTION_NEW.
Thanks and Regards,
Prabhakar Dharmala

Exit or BADI for Profit Center Block in Tcode KE51 , KE52

Similar Messages

Maybe you are looking for