EXIT PO Item to get COBL-KOSL

Hi friends.
I've already added three fields in PO Item with EXIT/append CI_EKPODB.
I need to take part of COBL-KOSTL (511 screen) in fields A and B (ZZ fields) during EXIT processing from field COBL-KOSTL. Because these EXIT's doen't see this value which is out of its scope.
I tryied creating a enhancement point in screen 511, and I can EXPORT this value to MEMORY. But it works only in ME22. I need it independent in which tramnsaction I use, ME22 or ME22N. In ME22N it doesn't work because I couldn't create any enhancement point (implicit). It's OO and doesn't let me to do the right thing.
I tryied to encode BADI ME_GUI_PO_CUST in some methods but it doens't stop on my test's BREAKPOINT.
Any idea ?
thanks,
Glauco

Worked using:
  CALL FUNCTION 'DYNP_VALUES_READ'

Similar Messages

  • SCs line items are getting splitted into different POs.

    Hi Experts,
    I am using SRM 5.0 (EBP4.0) ECS.
    When operational purchaser is doing carry out sourcing then SC line items are getting splitted into different POs whereas all the criteria are same I mean all the SC line items are having same
    1.Purcg.Grp
    2.Purch.Org.
    3.Company Code
    4.Plant/Location
    5.Vendor (Preferred)
    6.All product Cat.are assigned to one system only.
    (In BBP_PD for the SC I dont see any reason for the split)
    7.Using Intended for Gouping Option also at the time of Carry out sourcing.
    Earlier also I have raised the same question but I didnt get any reply, only some hints and other reference and help bu Yann but I am still facing the same issue and Pls help me if there is any OSS note for it .
    Here I'd like to let you know that I have seen same ticket and checked all the possible cause for split but never find any reason for split in this case.Pls help me on this issue urgently.
    Brgds
    Gopesh

    Hi
    As Yann told, there might be some standard BADIs for which we need to either modify the standard code in this case.
    Has SAP replied on this problem with any comments - on your OSS message yet ?
    <u>As far as I know, the following BADIs are some how, involved in the creation of the Local SRM PO. </u> 
    <b>BBP_ECS_PO_OUT_BADI </b>
    ( ECS: PO Transfer to Logistics Backend                  )
    <b>BBP_EXTLOCALPO_BADI </b>
    ( Control Extended Classic Scenario                   )
    <b>BBP_GROUP_LOC_PO   </b> 
    ( Exit Grouping of Items for Local Purchase Orders    )
    Please send me your detailed requirements at my email id for further analysis.
    [email protected]
    Hope this will help.
    Please reward suitable points, incase it suits your requirements.
    Regards
    - Atul

  • User exit at item level for billing block field default for VA41 or VA42

    Hi All,
    I want user exit at item level for contract (VA41or VA42) for the field Billing Block in the Billing document tab
    which has to populate with some default value.
    Which user exit i need to check.
    Regards
    Jai

    Hi,
    Use subroutine USEREXIT_FIELD_MODIFICATION in Include MV45AFZZ.
    Make sure this is for only tcodes VA41 and VA42 because this wil trigger for sales order also.
    Regards,
    Ashok.

  • Line item is getting Switched in OBD, created with ref to PO

    I have created a PO# 4500189441.
    In that PO there are two line items as below:
    Line item# 10              C792X1CG                         280
    Line item# 20              X792X1MG                         160
    But when we create an OBD with ref to this PO in VL10D, line item are getting switched as below:
    In OBD# 89490798,
    Line item# 10        
    X792X1MG                        
    160
    Line item# 20      
      C792X1CG                       
    280
    Can you please let us know the reason behind it or is there any configuration for this?
    Thanks & Regards,
    Tanmay Mondal
    SAP SD Consultant

    Hi Tanmay,
    First Check the Delivery type configuration in the Logistic Execution ---Delivery Type IMG path
    Your Delivery type should have Item Requirement as '202' and check the Default Order type assigned to it.
    Next go to the Specify Copy Control for Deliveries-----In that select the copy control from the Default sales doc. type which is assigned to the delivery type and the Delivery type which you are Using
    Select and in the Item Data click on the delivery item category which is assigned to the delivery type.
    In the details of the selection check the Item Data in the Data Transfer Block.
    The routine assigned to it should be '202'
    This will Solve your Issue.
    Regards

  • UWL items not getting cleared after performing action

    Hello
    We are on EP 7.0.
    We are experiencing a strange behaviorin UWL.
    When end users receive workitems in their inbox and they take the appropriate actions, the workitems still stay in the inbox. Normally they should no longer appear.
    I have tried the refresh in the UWL iview but no luck.
    It seems to work in DEV and other landscape. It does no work in Production. The software installation of UWL are the same across all landscapes.
    Is there any other setting that is required. In SAP GUI this is not an issue.
    Any feedback or tips would be helpful. thanks.
    Regards,
    Sunil

    Hi,
    As far as I can remember, this is a known limitation of UWL.
    Please, check this thread : UWL work item not getting cleared
    I am unsure whether you use the correct button the refresh the UWL (it is well hidden!), check the slide 6 in this document :
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20f4843e-314f-2a10-2a88-8c4afa20dda6&overridelayout=true
    Best regards,
    Guillaume

  • How to pass parameter values to a customer exit web item (WAD)

    Hi gurus,
    I have a wad with a data provider and a filter panel filtering that dp by using a variable. There is also a customer exit which saves the values of that variable into a z table.
    How can I pass the values of the filter panel to the customer exit web item?
    Thanks in advance,
    Rob

    Can you clarify your scenario? Which is the case you're talking about?
    1) You want to pass a parameter from OmniPortlet to a PL/SQL procedure.
    2) You want to pass a parameter from a PL/SQL procedure to OmniPortlet.
    In both cases the most obvious way of doing it is through request (URL) parameters.
    Render a link in your portlet (either in OmniPortlet or using PL/SQL) that invokes a portal page, containing the other portlet.
    Both OmniPortlet and PL/SQL allow you to wire and access page parameters.
    Take a look at the Using Parameter and Events section of the Portal User's Guide and the Parameters and Events section of the Portal Developer's Guide.
    Hope this helps,
    Peter

  • User exit is used to get incoterms from ship-to-party.

    Hi Gurus,
    my client needs to catch incoterms from ship-to-party,
    please let me know which user exit is used to get incoterms from ship-to-party.
    regards,
    Naren

    In our system we get the inco terms from the ship to party. We use user exit move_fields_to_vbkd in program mv45afzz. The code looks like this:
    Inco terms
    Added to get the values of Inco Terms from
    Ship-To-Party instead of Sold-To-Party.
    data: oldship like kuwev-kunnr value space.
    if sy-ucomm   <> 'UEBR' and  "Ordre er ikke oprettet med reference
       t180-trtyp <> 'A'.        "Der er ikke Vis mode
      import oldship from memory id 'ZSS'.
      if *vbkd-inco1 is initial. "Første gang vi er i User-Exitet
        if kuwev-kunnr <> kuagv-kunnr. "Varemodtager forskellig fra ordregiver
          select single inco1
                        inco2
         into (vbkd-inco1,
               vbkd-inco2)
         from knvv
        where kunnr = kuwev-kunnr
          and vkorg = vbak-vkorg
          and spart = vbak-spart
          and vtweg = vbak-vtweg.
        endif.
      elseif oldship <> kuwev-kunnr and
       ( *vbkd-inco1 <> vbkd-inco1 or
         *vbkd-inco2 <> vbkd-inco2 ).
        select single inco1
                      inco2
          into (vbkd-inco1,
                vbkd-inco2)
          from knvv
         where kunnr = kuwev-kunnr
           and vkorg = vbak-vkorg
           and spart = vbak-spart
           and vtweg = vbak-vtweg.
      endif.
    endif.
    Det skal ligge udenfor if-sætningen for at undgå at det overskrives
    ved oprettelse med reference
    move kuwev-kunnr to oldship.
    export oldship to memory id 'ZSS'.
    /Torben

  • Formula item doesnt get stored in database ???

    i have three text items shown on my canvas
    :basic
    :hra
    :total
    the :total is :basic + :hra
    and so :total is a display item. i therefore used in the property palete for :total in the formula section as :basic + :hra.
    The display gets shown properly after performing the calculation.
    But when the 'save' button is pressed it does not 'commit' the :total item to the database.
    The other items successfully get commited. Why so? whats the solution to this problem.

    Is Total a base table item?

  • When i try and download some items i get the error message that that say that the download can't continue because i need a later version of Firefox I have 5.0 currently installed on my PC. one such download was the Google toolbar

    I have a dell 320 optiplex 1.80 GHz. as stated above when I try and download certain items i get an error message essentially telling me that my version of Firefox is not compatible with ?(item i'm trying to download) the most recent was Google toolbar. the irony of it all is that I have version 5.0 installed so not unless I miss something when I initially installed Firefox 5.0 would be the latest version

    If you don't already have the "Google Toolbar" why would you want it, it is a problematic extension as are most third party toolbars. I would expect that anything that just about anything that you would use it for can be done with a bookmarklet. As for searching, the builtin Firefox search bar is wonderful you can add or create search engines for it.
    Google Toolbar (the second link tells you how you run it)
    * http://kb.mozillazine.org/Problematic_extensions
    * https://support.mozilla.com/en-US/questions/837473

  • I installed firefox but when trying to download web items I get a message that internet explorer has stopped working and does nothing but close program.

    I installed firefox but when trying to download web items I get a message that internet explorer has stopped working and does nothing but close program.

    See:
    * https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

  • User exit for iw21 to get Equipment 'position'

    Hi,
    can any one give the user exit for IW21, to get 'Position' of equipment.
    i.e. when i enter equipment in IW21 i am to save it's 'position '  automatically.

    Where do you want to to save the position in the notification?
    Also see the link at the top of this forum for PM/CS User-Exits
    PeteA

  • Tryng to return borrowed item.  Get following error message: Unable to return.  Error returning item. License server communication problem: E_BAD_LOAN_ID

    Tryng to return borrowed item.  Get following error message: Unable to return.  Error returning item. License server communication problem: E_BAD_LOAN_ID.  When I check authorization information I get a message that this computer is already authorized and a regurgitation of my email address and other info.  Does anyone have any suggestions on how to fix.

    I have the same message.

  • Line Items are getting rejected in Sales Orders

    Hi,
    I am creating sales orders using ORDERS Message type and for this I am using the Standard SAP Inbound Function Module to create sales orders.
    Idocs are getting processed successfully and sales orders are getting created, but line items in the sales order are getting rejected and hey are getting rejected with reason for rejection to be <b> No Availability Lost</b>.
    So, I would like to know if this is a problem with the data furnished in the Idoc or else any custom setting have to be maintained or not?
    Raghuram

    The reason why they are failing is because in the user exit as per the logic present here whenever a EDI Order with customer Purchaser Order Type DFUE is to be processed ABGRU (Reason for Rejection) has been flagged equal to 01 and hence order item lines are having rejection reason.

  • Sales Order Exit For Item Texts

    Hello all,
    I am having a very wierd issue with sales orders.
    I am creating an exit to redeterming item category of line item via the item usage field.
    The item usage field is a user defined field on the "Additional Data B" in the Sales Order.
    In MV45AFZZ, I am able to set the item category after the item usage is entered.
    Now the Item text nodes in the "Texts" tab at line item level depend on the item category.
    Thus item category ABCD has text T1 T2 & T3 assigned to it
    while item category EFGH has text T1 & T5 Assigned.
    My issue is that when the item category is changed from ABCD to EFGH, if one goes to the "Texts" Tab at line item level, the nodes shown are the same as those for item category ABCD.
    I cant find any exit to redetermine the text sequence.
    I tried USEREXIT_MOVE_FIELD_TO_TVCOM_I & TVCOM_H but they dont seem to work.
    I would really be very grateful for any help/ideas on how to get this resolved.
    Many Thanks,
    Preet

    Hello,
    Actually I dont need to either rename the text or change the contents (please correct me if wrong).
    Basically if PSTYV (itm_cat) = ABCD then text id's
    0001      Desc1
    0002      Desc2
    0003      Desc3
    0004      Desc4
    are shown.
    If PSTYV = 'EFGH' then text id's
    ID Node    Description
    0001       Desc1
    0006       Desc6
    0008       Desc8
    are to be shown ( this is what I want ).
    However right now if I change Item category from ABCD to EFGH then the nodes on the "Text Tab are
    0001       Desc1
    0002       No Description Shown
    0003       No Description Shown
    0004       No Description Shown
    0006       Desc6
    0008       Desc8
    I cant get a screenshot which would probably explain it better.
    In short is there any way of not displaying specific test-id's in the long texts for line items.
    I realise its a Friday here but any help will be deeply ..deeply appreciated.
    Many Thanks,
    Preet

  • ME31L/ME32L, ME31K/ME32K badi/user exits at item level

    hi all,
    i need to check tax jurisdiction code per item of scheduling agreement and contract.
    coz i need to prompt an error message "tax jurisidation code at line XX is blank" if no tax jurisdiction code is specified.
    can you help me what badi or userexit to use?
    tnx!

    Hi. I'm not aware of any specific user exits or BADI's for contracts, there are lots for purchase orders, and 1 for creating release POs from a contract, but I can't see any spefically for checking contract items.
    However, you could try the custom field exit MM06E005. This would be a bit of a cheat, but it does get called by all purchasing documents including contracts, and all fields are available to check against so you could try and use it just to check the standard fields.
    You can definitly issue errors into the contact from this exit.
    Regards,
    Dave.

Maybe you are looking for

  • MacBook Security Software

    Is there any software that when a MacBook is stolen it takes a picture of the thief with the isight and as soon as they connect to the internet sends the information (picture, ip address, etc) for tracking? Thought I read this somewhere. Any help is

  • Estimate database

    hi...when planning a new database how do i estimate the size of the database(both physical and logical) and also how do i estimate the growth of the database?

  • How to block deliveries appearing in MD04?

    Hello All, How to block deliveris appearing in MD04? We want to block deliveries of certain Sales order (ZXY) /Storage location combination (ABCD) i.e. deliveries of Order type ZXY, storage location ABCD should not appear in MD04. thanks

  • Possible? To add new file types to Bridge?

    When a file isn't listed in the file type list in the preferences, then Bridge (in Vista) doesn't allow me any changes for the "open with" function. It seems that I MUST live with Bridge's own handling for this file, even when it is false. (e.g. I al

  • Possible to associate file extension with webstarted app?

    A common property of microsoft apps is to associate file extensions with specifiec apps. For example, when you double click on a .xl file, Excel is launched. Can the same kind of thing be done for Webstarted apps? If so how?