Exiting the VI and closing it with a front panel toggle switch

I am developing a Data logging application by plotting a four channels on a Chart.
What I would like to do is this :
- Like any Windows application, as soon as the user double clicks the short cut to the VI, it should the load VI, run and wait for him to start the plotting for which there is a toggle switch. No problem here.
- And the other toggle switch called "EXIT" when operated, should close the VI application ( equivalent to clicking the "X" button on the title bar.
How to do this LV7 full development system?
Thanks
Raghunathan
Raghunathan
LV2012 to Automate Hydraulic Test rigs.

Your situation is different, because you have a toplevel VI. (remember, it says "Open front panel if called THEN close afterwards if originally closed.) A toplevel VI is not "called"!
If you want it to "run when opened", use the checkbox in the execution menu of VI options.
Put a TRUE boolean diagram constant near the right border of your outermost loop, place a "Quit LabVIEW" outside all loops, and wire them together.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

How do i put tv programmes and videos from itunes to another iphone, without having to delete all data on the phone and replacing it with my library? i switched the 'sync only ticked songs and videos box' yet it still wont let me transfer videos from my i

How do i put tv programmes and videos from itunes to another iphone, without having to delete all data on the phone and replacing it with my library? i switched the 'sync only ticked songs and videos' yet it still wont let me transfer videos from my itunes onto my new phone, any ideas??

Copy the entire itunes folder from the old computer to the new computer.

I want to publish my data using datasocket connection on the net and I want to use Front panel binding. Can I?

I want to publish my data on the net.
I want to use front panel binding and I do not want
to write the code. Can I do that. What should I modify
in my datasocket server manager. The other question is, When I open my VI, I want to open automatically my DataSocket Server. My english is bad. When I open the LabView I also want to open my DataSocket server. How can I do this?

To use datasockets to publish data to be accessed via the web, see the following document.
http://digital.ni.com/public.nsf/websearch/F58A6C2DAAADECB68625672400636145?OpenDocument
This document explains how you can create an interactive Web page with which users can view data from a remote acquisition application without the common problems of a client-server application. You use the Measurement Studio DataSocket control and Microsoft Visual Basic to create a software component that you can insert in a Web page. You then use that Web page to read, write, or share data with other applications across the Internet.
If you want to publish data but do not want to write any code, you should consider the web publishing tool available in Labview 6.1. This tool allows
you to create a webpage to be published from the the LabVIEW webserver on your machine. See the following link for more information on ways to easily publish to the web from LabVIEW.
http://zone.ni.com/devzone/conceptd.nsf/webmain/E4E311FA046EE24586256B1F0074F39D?opendocument
As for starting the datasocket server when you run your VI, you can use the 'System Exec' VI to run the application. The exe to start the server is located in the following directory:
C:\Program Files\National Instruments\DataSocket\cwdss.exe
I hope this is helpful.

I need help with closing a running program. It seems like it does not count as a program. Tried to turn of the computer and closing all programs. Please help!?

I have a problem with a grey text box. It writes and says all i do. For example: When i now write it says all the letters one for one. If i open a new rogram it says so. If i click on something it gives me information about it. I can click the box and drag it, but dont close it. I have restarted the computer and closing all windows and programs. It just popped out when i was pressing some buttons on the mac. I think it is a easy way to fix it, but i cant find out what it is named and search for it. I think it is made for help and i did not download anything to get it. If i change user on the mac it does go away when I am on the other user, but i really want to keep the one i have because off all the settings and programs i have.
Please reply if you know anything about this.
This is a printscreen of the box, the language is Norwegian if someone wonder...
It is really annoying, I hope someone can help me out.

Oh thanks alot! Really happy that people take the time to answer my `noob`questions! Would not find that out by my own.
Thanks!

Trying to get the Opening and Closing Balance, 0TOTALSTCK and 0VALSTCKVAL

Hi Experts, Good Day.
I am developing a query for Stock Balances, Using Custom cube created with copy from 0ic_c03.
I am trying to get the Opening and Closing Balance, based on Non-Cumulative KF - 0TOTALSTCK and 0VALSTCKVAL.
Both The KF's Behaviour for Exception Aggregat. = Last Value
I am using VARIABLE OFFSET as -1 to get Opening Balance, and just restriction for Closing Balance based on 0CALMONTH
Unfortunately i am getting data for the periods which does not have data in my Cube. It is taking the total value as closing balance for the periods which we don't have transaction in the cube.
For Ex. I have data for 09.2010 & 10.2010 a particular material, when i enter 08.2010 as input i am getting the total value of the material.
I hope you understand the problem and solution soon.
I will give you more explanation if needed.
Thanks in Advance....
Have a great Day Ahead.....
GopalN

Hi GopaIN,
can you explain us process you have done about initialization of data (2LIS_03_BX, cube compression)? it seams like there was data before 09.2010 and you load it with 2LIS_03_BX data source. That data is not in cube, but just used for update markers.
Edited by: Sasa Todorovic on Mar 25, 2011 9:48 AM

Insert and update query to calculate the opening and closing balance

create table purchase(productid number(5) ,dateofpurchase date,
qty number(5));
create table inventory(invid number(5),productid number(5),
idate date,openingqty number(5),closingqty number(5));
Records in inventory:
1,1,'01-jan-2009', 10, 20
2,1,'03-jan-2009', 20, 30
3,1,'04-jan-2009', 40, 50
when I enter the purchase invoice for 15 qty on 02-jan-2009
after say '15-jan-09' , a new record should get inserted
with opening balance = (closing balance before 02-jan-2009)
and all the opening and closing balance for that product should
get affected.
If the invoice for 20 qty is entered for the existing date say
'03-jan-2009' in inventory , then the closing balance
for 03-jan-2009 should get updated and all the following records
should get affected.
I need the insert for the first one and update query for the
second one.
Vinodh

<strike>You can do this in one statement by using the merge statement</strike>
Hmm, maybe I spoke too soon.
Edited by: Boneist on 25-Sep-2009 13:56
Thinking about it, why do you want to design your system like this?
Why not simply have your purchases table hold the required information and then either work out the inventory on the fly, or have a job that calls a procedure to add a row for the previous day?
If you continue with this design, you're opening yourself up to a world of pain - what happens when the data doesn't match the purchases table? Also when is the inventory cut-off to reset the opening/closing balances? Monthly? Annually? Weekly? If it's set to one of those, what happens when the business request the inventory for a particular week?
Edited by: Boneist on 25-Sep-2009 13:59

I hired a movie and half way through it stopped loading so i exited the movie and it vanished, when i clicked on the movie again it asked if i wanted to rent it???

i rented a movie from the apple store off my apple TV half way through the movie it stopped like it was waiting for it start loading. i then exited the movie and went to click on it again but found that the movie was no longer there and when i clicked on the same movie it asked it i wanted to rent it, which i had just done. i would just like to know what happened here and how to fix this?

This has happened to me 3 consecutive times!!
3 movies. 3 mysterious stopages in mid movie with no fix.
If only they solved their own problems as quickly as the scoffed your money!
I have no idea how to report it.
Apple only wants to communicate with you when you want to purchase products but makes it brutaly painfull to solve problems.
They have become a pathetic, gready symbol of sloppy excess.
They WIIL fail because they forgot how deliver their products.
I was a lifelong apple user and that is over for good!
I've been ripped off by them for the last time!
There's too much competant competition out there now.

F110- not able to clear the debit and credit entry with the same reference

Hi,
I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
Kindly advice me what could be wrong.
Thanks,
Manya.

Hi,
Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
Thanks!
Raju

Control the opening and closing period

hi ,
Control the opening and closing period
How I can control open and close peroid at the level of (ledger or legal entity or operating unit)
thanks

can you clarify it, what does it mean 'control' the opening period

Inventory opening and closing stock with value report

Hi All,
Is it possible to get details of both opening and closing stock with value of each items of last financial year (2009-10) in inventory report?
Mizan

Hi..
you can try this query
Declare @FromDate Datetime
Declare @ToDate Datetime
set @FromDate =
    (Select min(S0.Docdate) from OINM S0 where S0.Docdate >='[%0]')
set @ToDate =
    (Select max(S1.Docdate) from OINM S1 where S1.Docdate <='[%1]')
select * from
    SELECT T0.itemcode,
    min(T0.Dscription) as 'Item Description',
    min(B1.ItmsGrpNam) as 'Item Group', W1.Whscode, C1.Location,
    (isnull((
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate<@FromDate ),0)-
    isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate<@FromDate),0)
    ) as [Opening Stock],
    isnull((
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode
        and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate
        and O1.docdate<=@ToDate and O1.inqty>0
        and O1.transtype in (20,18)),0
    ) as [Purchase Quantity],
    isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate and O1.docdate<=@ToDate
        and O1.outqty>0 and O1.transtype in (21,19)),0
    ) as [Purchase Return Quantity],
   isnull((
        Select sum(isnull(outqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate>=@FromDate and O1.docdate<=@ToDate and O1.outqty>0
        and O1.transtype in (13,15)),0
    ) as [sale Quatity],
    (isnull
        Select sum(isnull(inqty,0))
        from OINM O1
        where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
        and O1.docdate<=@ToDate),0
        isnull((
            Select sum(isnull(outqty,0))
            from OINM O1
            where O1.itemcode=T1.itemcode and O1.Warehouse=W1.Whscode
            and O1.docdate<=@ToDate),0)
    ) as [Closing Stock]
    FROM OINM T0
    INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode
    INNER JOIN OITW T2 ON T1.ItemCode = T2.ItemCode
    INNER JOIN OITB B1 ON T1.ItmsGrpCod=B1.ItmsGrpCod
    INNER JOIN OWHS W1 ON T2.WhsCode = W1.WhsCode
    INNER JOIN OLCT C1 ON W1.Location=C1.Code
    Group by T1.itemcode, T0.Itemcode, W1.WhsCode, C1.Location
) a
where (a.[Opening Stock]
        +a.[Purchase Quantity]
        + a.[Purchase Return Quantity]
        +a.[sale Quatity]+a.[Closing Stock]
       ) !=0
Regards,
Bhavank

HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.

TS1814 hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing to t

hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.

http://support.apple.com/kb/HT1808

Please Please Please:let me rating my raw files in the iPad and then sync with LR.

Please Please Please:let me rating my raw files in the iPad and then sync with LR.

definitely the battery wont be the problem.
The important thing is that the IPAD already can see the RAW files;)
would be very useful to make the rating in it.
have the option of cataloging all the pictures of a event
anywhere !!!! even in standing up position
hope I explained correctly (English is not my primary language)
Saludos,
Daviel Taveras
www.vlokstudio.com
RD ( 809 ) 338 - 0001
USA ( 305 ) 305 - 2782
[email protected]

TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
Sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again
If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
If that doesn't work, restart your router and reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

[svn:fx-trunk] 11488: Resubmitting binary distribution of xercesPatch. jar from the third party module in the SDK and compiled it with Sun JDK 1.4 .2_12.

Revision: 11488
Author:   [email protected]
Date:     2009-11-05 17:10:10 -0800 (Thu, 05 Nov 2009)
Log Message:
Resubmitting binary distribution of xercesPatch.jar from the third party module in the SDK and compiled it with Sun JDK 1.4.2_12.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-16818 - Must open-source the code for xercesPatch.jar.
Reviewer: Discussed with Gordon
Tests run: Checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16818
Modified Paths:
    flex/sdk/trunk/lib/xercesPatch.jar
    flex/sdk/trunk/modules/thirdparty/xerces-patch/build.xml

Did you try this:
http://forum.java.sun.com/thread.jsp?thread=434718&forum=60&message=1964421

Exiting the VI and closing it with a front panel toggle switch

Similar Messages

Maybe you are looking for