Expand buttons quit working until I remove history

When I log into my employer's web site, there are expand/collapse buttons that work perfectly, and have always worked perfectly. Recently, I purchased a Windows 8 computer, and along with it came Firefox 21.0, and suddenly, the expand collapse buttons are problematic. I haven't nailed it down exactly, but after some number of uses, the buttons stop working. After I clear history, they start working again.
In the interest of full disclosure, I have third party software that enhances the capability of my company's web site that uses scripts and Grease Monkey. However, disabling Grease Monkey does not seem to have any impact on the issue.
Any ideas?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Similar Messages

IBook quit working. I removed it and cannot relode it to my Ipad. What do I do to reload the program and get it to download my purchases?

iBook quit working. I removed it and cannot relode it to my Ipad. What do I do to reload the program and get it to download my purchases?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
*[1] http://kb.mozillazine.org/Session_Restore
*[2] http://kb.mozillazine.org/sessionstore.js
*[3] http://kb.mozillazine.org/Multiple_profile_files_created

Buttons quit working

I'm adding buttons (that open other Captivate tutorials) to
the end of my tutorials. If the user doesn't click the buttons
pretty quickly they quit working. They highlight and look like
they're being clicked, but they don't open the programmed project.
It seems to me that when the slide ends, so does the functionality
of the button. The buttons don't have a "pause until user clicks"
option to check. They do have a pause time, but frankly I thought
that was causing the problem and I turned it off (or I shouldn't
have done that?). But apparently that hasn't helped.
Then, I added an invisible click box to the page that doesn't
do anything if clicked, and has the pause until user clicks
functionailty enabled. This seems to work, but is it necessary?
Feeling like I must be missing something here and can use
HELP! Thanks in advance!
Arl

Hi Arl
Buttons by their very nature are designed to pause until the
user clicks. So you really shouldn't turn off the pause.
Normally, if you don't change the action assigned to the
button, it will simply "Continue playing project" when it has been
clicked. And all a button will receive is a single click and it's
done. So if you failed to change the default, the user clicks and
the button continues to the pause point and stops. Then it is dead,
as the single click has expired.
By turning off the pause, you have probably allowed the
playhead to move into the "Inactive" part of the button.
Personally, I'd suggest deleting the buttons AND the Click
Box (The Click Box shouldn't be needed, as the Button should
provide the pause). Then carefully re-insert buttons and be careful
and specific with what you tell them to do. Ensure they pause and
ensure they do something other than "Continue playing project" when
clicked by the user.
Hopefully this was helpful in some way... Rick

Menu buttons dont work until menu itself loops

i have a button on the menu, and connects to a video track. when i simulate the project, the button works fine, but when i try a burned dvd in a set top player, the button won't work until the menu itself has reached the end and starts over again.....???

You can control the moment when the buttons overlay appears (activation) changing the Loop Point time. You have 3 time settings in the Inspector for your motion menu: Start, Loop and End points. With these settings you can manage how to play the background movie in your menu.
To make your buttons activate inmediatly when the motion menu starts, you must set the same time setting in Start and Loop points. Let me know you current settings for these three points if you found problems.
From DVDSP Manual
Loop Point
You can use the Loop Point setting to set a frame different from the starting frame to use when you choose Loop as the At End setting. By default, the Loop setting is the same as the Start setting. When you adjust the Loop setting, you are choosing the frame that is jumped to once the end frame is reached. This allows you to have a looping background with a beginning section—for example, a fade up from black or a transition from another menu—that only plays the first time through. If there is audio assigned to the menu, it automatically follows the video as it loops.
This setting also defines when the button highlights appear—the viewer cannot navigate the menu’s buttons until the loop point is reached. Additionally, the Loop Point setting controls the video used for the menu’s tile in the Graphical tab.
Alberto

TS3274 Home button quit working, have to turn on and off to do anything

Home button on iPad 2 quit working, have to turn on and off to do anything, any ideas? I tried updating and restoring, nothing works. It is not damaged in anyway. It just suddenly stopped.

You are amazing, this worked perfectly! Apple should give such good advice.
Thank you so much
Do you have any advice for my iPhone 3, the sleep/wake button just quit working on it. I can't turn on or off, it just stays on. I updated and restrored but it did not help.
Thanks

Tray Expand button not working

Dear Expert,
After the SPS upgrade of SP 21 for java stack, I am facing a issue of Expand button of the tray is not working for the iviews which contain dynamic information such as BI reports etc., Please help me out in this issue
Regards
Noel

Hi Noel,
The expand button / the tray UI element can be a Webdyn Pro Java Component.
This does not have to be a iview tray.
Are you using the BI iView in a separate Portal or are you using Portal Federation ?
If you have 2 portals, what is the second portal version ?
Regards,
Kai

My track pad mouse button quit working

The mouse button on my MacBook has quit working, the track pad itself works fine, moves the mouse pointer, etc, but nothing can be selected with the button. Same problem in Windows booted through boot camp. I noticed the problem after running the boot camp support program, this may have "broken" the operation of the select button, but I don't know how to back out those driver updates.

This has been happening to me too. I can hit Escape and things go back to normal.

Top lock button quit working how do i fix it

my top lok button stopped working along with my front facing camera please help

There is no fixing the lock button without voiding the warranty; however,there is a work around. Go to Settings>General>Acessibility>Assistive Touch
Turn that ON, once you have done so, a white square/circular icon will pop up onto your screen. If you click it, click on DEVICE and hit the button that says LOCK screen, your phone will now be locked. Since your lock button is now broken, I would advise for you to ocassionally restart your phone, maybe a few times a month, to prevent it from lagging, you can do this by hitting the White square/circular button>Device, and holding down the Lock screen button a for a few seconds, and powering it off. To turn it back on, simply plug your phone back into the charger. As for the camera not working, I have no idea how to fix that.

Sleep button quit working after iOS 5 update on 3gs

i updated my iphone 3Gs with ios 5 and now the sllep button no longer works

Have you tried a Restart or a Reset..
Restarting your device
1) Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
2) Press and hold the Sleep/Wake button until the Apple logo appears.
Follow these steps to reset your device
Note: Reset your device only if it is no longer responding and the steps above do not work.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone Reset
http://support.apple.com/kb/ht1430

Power button quit working

The power button on the iPad quit functioning.
Once the screen is turned on, the only way it powers down is after it times out from lack of use.

1. Try doing a reset(no data will be lost):
Disconnect the iPhone from any computer. Press and hold both the Home button and the Sleep/wake(power) button simultaneously for about 15 seconds and release when the Apple logo appears. This may not work if the power button is actually faulty.
2. If that doesn't solve the issue, backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn
Message was edited by: jesterwylde

Disappearing menu bar and minimize button quits working

I'm working in Entourage or Firefox (with about 3 other small applications open and Classic is running) and the screen suddenly blacks out, as if a screen saver came on for about a quarter second, then the screen comes back. The Menu bar is gone. I can get the menu bar back by clicking on the background and then clicking back on the application, but the minimize button no longer works on the open applications' windows. If I open a new application, the minimize button works on that window. Sometimes I have trouble getting the menu bar back, depending on the application that was open when it "blinked". When this is happening, it occurs at about 20 to 30 minute intervals. Any ideas of what's happening? Has anyone experienced something similar?
Power Mac G4 (AGP graphics) Mac OS X (10.4.8) 400 MHz, 512 MB RAM

You can check that you do not run Firefox in full screen mode (Mac: command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf
You can also try to remove the Firefox plist file (org.mozilla.firefox.plist).
* http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)

Why did the smaller/larger buttons quit working in Mail 3.3

In Apple Mail 3.3, message toolbar, the smaller/bigger buttons no longer works. The function works using the pulldown menu. I tried reloading mail, and a new tool, but no cigar. Anybody know what's what?
Thanks
Dalej

My bad, I should have said Mail V. 3.2 as that is what I have.
The buttons I refer to are on the tool bar of a message window. If you don't have them, you can go to the view pulldown menu, then select customize toolbar and drag the
button to the toolbar of your message window. It looks like a small capital A and a large capitol A. When viewing or writing an e-mail in the older versions, if the message letters were small I could go and hit the large A a few times and the lettering would increase in size, but no more with my upgrade to 10.5.
Dalej

Next / forward button quit working

I was cleaning up my HD, transferred iTunes folder to external HD. Dragged & dropped files back into music lib, now the forward/back buttons don't work. Files play when clicked/opened directly, but won't move to next song.
PPC G4, 1.25ghz, 1.25gsram,OS10..4.11, itunes 8.2

Try resetting the ipod first.
http://docs.info.apple.com/article.html?artnum=61705
If does not work, try restoring the ipod.
http://docs.info.apple.com/article.html?artnum=60983

MBP 2.16 C2D Trackpad Button Quit Working

Booted my MBP 2.16 Core 2 Duo today and the trackpad button suddenly does not work. The trackpad itself is working (move my finger and the cursor follows), but physical clicks to the trackpad button or taps on the trackpad itself don't register as clicks.
Under Keyboard and Mouse preferences, the Mouse tab is also unavailable.
Any hints on what I can check? I've zapped PRAM, repaired permissions, don't have a bulging batter, etc, etc.
If I plug in an external moue, the system registers the clicks from the external mouse, but the trackpad button seems dead.
I'm under AppleCare, but before I call for the box, I thought I'd ask for help here first.
Thanks,
Randy

One correction: taps on the trackpad itself do register as clicks. Only physical clicks to the trackpad button don't work.

Why do my rollover buttons quit working when I burn my project to a DVD?

Hi
I have a reel of my work built and everything functions when I simulate the project in DVD Studio Pro. However, when I burn the project to a DVD, my rollover buttons no longer work )and the quality of my work (menus, images, and videos) becomes very poor. I created my layered rollover buttons and menus using Photoshop. How can I resolve these issues?
Thanks

Welcome to the discussions... Eric has the answer for you - you won't get a rollover effect when you use photoshop layer based menus because of the way that these become a series of different menus when the disc is built. You most certainly can get rollover effects if you use a standard overlay menu type.
The reasons for using a layer menu are largely confined to situations where you absolutely must reveal some contextual information when a user selects a button, and where this information must use a common area of the menu to all of the other buttons that do this. In all other situations avoid using them if you can, as they are so limited, offer slow playback to the end user, need more than one mouse click to activate a button and don't support audio or video backgrounds.
Use a standard overlay and you won't have these issues.

Expand buttons quit working until I remove history

Similar Messages

Maybe you are looking for